For who wish here the 3 newest stock kernels for S3 mini I8190.
For instal use Odin.
Update:here is kernel for S3 mini I8910L and for S3 mini I8190N.
UPDATE_2:new kernel for S3 mini:XXAMC1.
UPDATE_3:kernel for S3 mini I8910T
UPDATE_4:new kernel S3 XXAMD3.
UPDATE_5:new kernel S3 XXAME1
UPDATE_6:new kernel S3L:UBAMD1 and kernel S3N:ZSAME1
UPDATE_7:new kernel for S3mini:XXAMG1
UPDATE_8:new kernel S3:XXAMG4
UPDATE_9:new kernel S3:UAAMH1
Which kernel is for what?
Any German Kernel?
Is stock kernel for XXAMA4,XXAMB2 and XXAMB3; generic firmware.
Yes AMB3 is for German Stock. Don`t forget this kernel is for GT-I8190 only.
installed ..what did i gain/recive by installing that?
i installed it with odin ..just want to make sure its that because i dont remember what was before .."3.0.31-900027 [email protected]#2 smp preempt wed feb 6 01:49:02 kst 2013"....looks like it went fine and good ...can you please tell me what i gain by that because i'm new with all that ...thanks..:good:
---------- Post added at 02:51 AM ---------- Previous post was at 02:47 AM ----------
i8190n
umarian said:
Is stock kernel for XXAMA4,XXAMB2 and XXAMB3; generic firmware.
Click to expand...
Click to collapse
in odin flash as PDA?
nazri5363 said:
in odin flash as PDA?
Click to expand...
Click to collapse
Yes man.
Can i use one of the first three kernels with my:
I8190XXAMA1 Basisbandversion?
Buildnumber JZ054K.I8190XXAMA1
THX for Help!
Com.Chakotey said:
Can i use one of the first three kernels with my:
I8190XXAMA1 Basisbandversion?
Buildnumber JZ054K.I8190XXAMA1
THX for Help!
Click to expand...
Click to collapse
Yes man you can use without problem.
better battery life...and boot speed
better battery life...and boot speed.2 things i noticed since i installed it
i8190nxxama1 dmodv2ni8190nxxama1 rev0.7
:good:
sassonno1 said:
better battery life...and boot speed.2 things i noticed since i installed it
i8190nxxama1 dmodv2ni8190nxxama1 rev0.7
:good:
Click to expand...
Click to collapse
Where can i find this ROM/Kernel? OK SORRY JUST FOUND IT...it's a ROM ;( its for me too much work to flash again all my apps etc...
When i flash my Kernel again with Odin, all Apps are deleted or is it just an "Update"?
Com.Chakotey said:
Where can i find this ROM/Kernel? OK SORRY JUST FOUND IT...it's a ROM ;( its for me too much work to flash again all my apps etc...
When i flash my Kernel again with Odin, all Apps are deleted or is it just an "Update"?
Click to expand...
Click to collapse
When flash a new kernel all apps remains and of course all data.
umarian said:
When flash a new kernel all apps remains and of course all data.
Click to expand...
Click to collapse
Mhhh still flashed the kernels with my Touch CWMR...
How do i flash it with Odin?
My Guide only show me flashing a completely ROM but this is the kernel only...
Flash in PDA in Odin thats all.
Sent from my GT-I8190 using xda premium
Com.Chakotey said:
Which kernel is for what?
Any German Kernel?
Click to expand...
Click to collapse
You're mixing kernels and radios, kernels are for booting up your system. Basically it's a system core. Radio is for RIL, signal and data.
ODIN > put the kernel file on PDA> START Flashing it is correct?
And can i flash this stock kernel even my phone is not ROOTED?
Sent from my GT-I8190 using xda app-developers app
kupalogz_11 said:
ODIN > put the kernel file on PDA> START Flashing it is correct?
And can i flash this stock kernel even my phone is not ROOTED?
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
yes....flash as pda in odin...no need root to flash via odin.....
Bit of a noob question, by my kernel ends differently, is it still safe to flash a new kernel Thx in advance, I'll post a pic
Carrier is O2 UK
Sent from my GT-I8190 using Tapatalk 2
MattJaO3D said:
Bit of a noob question, by my kernel ends differently, is it still safe to flash a new kernel Thx in advance, I'll post a pic
Carrier is O2 UK
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Yes,you can flash;its safe.
Thanks for response, will do when I get home
Sent from my GT-I8190 using Tapatalk 2
Related
I am trying to root my recently updated Bell mobility samsung galaxy S2 I9100 running ICS 4.0.3, Baseband version I9100MUGLD3, Kernel Version 3.0.15-I9100MUGLD3-CL377577, Build Version IML74K.UGLD3. I Can't Find anything on these threads. Can someone help? Thanks in advance.
Ethanp said:
I am trying to root my recently updated Bell mobility samsung galaxy S2 I9100 running ICS 4.0.3, Baseband version I9100MUGLD3, Kernel Version 3.0.15-I9100MUGLD3-CL377577, Build Version IML74K.UGLD3. I Can't Find anything on these threads. Can someone help? Thanks in advance.
Click to expand...
Click to collapse
check the link below
Universal Rooting Method for ICS
Sun90 said:
check the link below
Universal Rooting Method for ICS
Click to expand...
Click to collapse
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Ethanp said:
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Click to expand...
Click to collapse
You're device is fine. I have the same thing and I've flashed hundreds of times. You just have to know what you're flashing and understand the basics
Sent from my GT-I9100 using xda premium
kilometers4 said:
You're device is fine. I have the same thing and I've flashed hundreds of times. You just have to know what you're flashing and understand the basics
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I am familiar with flashing. I had the LG Optimus LTE before this and flashed quite a few roms, This phone however has me awfully confused. I have been researching all day. And so far i am under the understanding that the touch cwm are not good and the use the 4.0.1.5 recovery. But what i don't understand is how do you install roms without wiping data/factory reset through cwm? don't most roms require this? and isn't that what causes the superbrick? Sorry for sounding like a noob. but can you tell me how you do your flashing?
Ethanp said:
I am familiar with flashing. I had the LG Optimus LTE before this and flashed quite a few roms, This phone however has me awfully confused. I have been researching all day. And so far i am under the understanding that the touch cwm are not good and the use the 4.0.1.5 recovery. But what i don't understand is how do you install roms without wiping data/factory reset through cwm? don't most roms require this? and isn't that what causes the superbrick? Sorry for sounding like a noob. but can you tell me how you do your flashing?
Click to expand...
Click to collapse
Just use a different kernel, like siyah (www.gokhanmoral.com and make it's for the s2 not s3). Then you can wipe data. Just didn't not be on 4.0.4, and have a samsung based kernel (the kernel dev should have info in the op). Once you're on a safe kernel you can flash whatever you want and wipe data.
Sent from my GT-I9100 using xda premium
kilometers4 said:
Just use a different kernel, like siyah (www.gokhanmoral.com and make it's for the s2 not s3). Then you can wipe data. Just didn't not be on 4.0.4, and have a samsung based kernel (the kernel dev should have info in the op). Once you're on a safe kernel you can flash whatever you want and wipe data.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ok so i flash the kernel via odin? because my phone doesn't have cmw installed. Siyah-s2-v4.0.1.tar that is the kernel i am about to flash. Is it safe for my phone? also do i need to do a backup of my stock kernel?
Ethanp said:
Ok so i flash the kernel via odin? because my phone doesn't have cmw installed. Siyah-s2-v4.0.1.tar that is the kernel i am about to flash. Is it safe for my phone? also do i need to do a backup of my stock kernel?
Click to expand...
Click to collapse
Yeah, you should be able to flash through Odin. And you can flash back to stock by getting a stock firmware from www.sammobile.com and flash through Odin
Sent from my GT-I9100 using xda premium
Ethanp said:
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Click to expand...
Click to collapse
How do you test for Emmc brick?
Sent from my iPad using Tapatalk HD
Spacemonkie4207 said:
How do you test for Emmc brick?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Go to this page, http://forum.xda-developers.com/showthread.php?t=1693704 and download and install the gotbrickbug apk
kilometers4 said:
Yeah, you should be able to flash through Odin. And you can flash back to stock by getting a stock firmware from www.sammobile.com and flash through Odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
So I did what you told me too. And went ahead and flashed a custom kernel (Siyah 4.0.1) and tried installing salman ics rom. and now i have a never ending boot loop.. any suggestions?
Ethanp said:
So I did what you told me too. And went ahead and flashed a custom kernel (Siyah 4.0.1) and tried installing salman ics rom. and now i have a never ending boot loop.. any suggestions?
Click to expand...
Click to collapse
Did you wipe data when you installed it? It's usually highly recommended
Sent from my GT-I9100 using xda premium
kilometers4 said:
Did you wipe data when you installed it? It's usually highly recommended
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes I wiped data, cache and dalvik cache. Couldn't get into recovery so i just re-flashed my firmware via odin. All is good now and successfully flashed cm9 with no issues. Must have been a bug in the rom.
i was trying to get custom roms, but after i install the rom from cwm and reboot , i only get the yellow triangle and it never loaded , so i had to flash it again with the soriginal frimware from sammobile.com. everytime i try i get the same thing. i dont know where is the problem so i was hoping to get some help here .. and excuse my english
Phone: Samsung Galaxy S II I9100G
Android Version : 2.3.6
Baseband vesion: I9100GXXKL4
Kernel Version : 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.JPLC1
If you can enter download mode you have to try flash the phone by old stock rom gingerbread in 3 files version. If it doesnt work you have to use jitag than flash by 3 files rom. By odin ofcourse. Jitag fix triangle.
Wysłane z mojego GT-I9100 za pomocą Tapatalk
supi9 said:
If you can enter download mode you have to try flash the phone by old stock rom gingerbread in 3 files version. If it doesnt work you have to use jitag than flash by 3 files rom. By odin ofcourse. Jitag fix triangle.
Wysłane z mojego GT-I9100 za pomocą Tapatalk
Click to expand...
Click to collapse
thank you for responding, i dont know the 3 files version and jitag can u give me a link to a thread about this or something ?? thank u..
Since you have the G version, follow the guide
http://forum.xda-developers.com/showthread.php?t=1619571
And ensure you flash a custom ROM specific to G version and not I9100 International version.
Sent from my GT-I9100 using Tapatalk 2
acekay said:
Since you have the G version, follow the guide
http://forum.xda-developers.com/showthread.php?t=1619571
And ensure you flash a custom ROM specific to G version and not I9100 International version.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
thanks i'll try this guide
i have another question, before i flash the ROM i want, i should flash a kernel first , right ?? which kernel i should use ??
Chico7kl said:
i have another question, before i flash the ROM i want, i should flash a kernel first , right ?? which kernel i should use ??
Click to expand...
Click to collapse
Check this thread
http://forum.xda-developers.com/showthread.php?t=1588737
It is repository of all kernels and roms for i9100g
You can try different kernels and ROMs and stick to what suits your needs.
Sent from my GT-I9100 using Tapatalk 2
Chico7kl said:
thank you for responding, i dont know the 3 files version and jitag can u give me a link to a thread about this or something ?? thank u..
Click to expand...
Click to collapse
I thought about the plug jtag. I did not notice your phone I9100G sorry.
Wysłane z mojego GT-I9100 za pomocą Tapatalk
i tiried everything its not working !! i tried to flash remix resurrection and cMiUi and after i install the rom and reboot it gives me the yellow triangle and never loaded !! :crying:
Have you done a factory reset before flashing custom ROM?
przemcio510 said:
Have you done a factory reset before flashing custom ROM?
Click to expand...
Click to collapse
yes i did , i followed the instruction in every thread about these roms. still the same thing happens
Chico7kl said:
yes i did , i followed the instruction in every thread about these roms. still the same thing happens
Click to expand...
Click to collapse
Can you please confirm if you followed the guide I posted in my first post to resolve the soft brick issue? Before you flash any custom ROM, make sure that you have a working stock 4.0.3 ROM. From the symptoms it seems the kernel is not loading as it should. So first follow that guide to flash a stock ROM.
Once the stock is up and running, you can flash custom ROM and/or kernel.
Sent from my GT-I9100 using Tapatalk 2
acekay said:
Can you please confirm if you followed the guide I posted in my first post to resolve the soft brick issue? Before you flash any custom ROM, make sure that you have a working stock 4.0.3 ROM. From the symptoms it seems the kernel is not loading as it should. So first follow that guide to flash a stock ROM.
Once the stock is up and running, you can flash custom ROM and/or kernel.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i did folow the guide u posted earlier but i flashed a stock 2.3.6 rom, does it matter ?
Chico7kl said:
i did folow the guide u posted earlier but i flashed a stock 2.3.6 rom, does it matter ?
Click to expand...
Click to collapse
Nope 2.3.6 should be fine as long as it loads properly and not gets stuck on the yellow triangle.
So next step would be to flash CWM recovery. You will get the detailed steps from second link under custom kernels. Flash it from odin. Once done take a backup from custom recovery and flash any GB or ICS rom from the recovery.
Sent from my GT-I9100 using Tapatalk 2
acekay said:
Nope 2.3.6 should be fine as long as it loads properly and not gets stuck on the yellow triangle.
So next step would be to flash CWM recovery. You will get the detailed steps from second link under custom kernels. Flash it from odin. Once done take a backup from custom recovery and flash any GB or ICS rom from the recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Okk when i flashed the ClockworkMod Recovery 5 from odin , i got stuck with the yellow triangle. i think the problem is in the CWM recovery flashing ! but i can take off the battery and put it on again to go ONLY to the download mode or recovery mode.
i had to re-flash a stock kernel i found on the same thread
The steps on the CWMR 5 thread should not cause any issues.
Just to confirm:
- You are using GB kernel with filename as GT-I9100G_GB_ClockworkMod-Recovery_5.0.2.8.tar
- In odin keep all as default. Do not select partition.
- The kernel tar file is selected in pda.
- No other file is selected in any of other sections.
Sent from my GT-I9100 using Tapatalk 2
Chico7kl said:
i tiried everything its not working !! i tried to flash remix resurrection and cMiUi and after i install the rom and reboot it gives me the yellow triangle and never loaded !! :crying:
Click to expand...
Click to collapse
Flash any ICS stock fw by Odin 3 v.1.85, make sure one package ticked - use rahmat3 cwm root method to root... (at s2 original development). Maximize ur search button..
Sent from my GT-I9100 using xda app-developers app
yes thats exactly what i have done
acekay said:
The steps on the CWMR 5 thread should not cause any issues.
Just to confirm:
- You are using GB kernel with filename as GT-I9100G_GB_ClockworkMod-Recovery_5.0.2.8.tar
- In odin keep all as default. Do not select partition.
- The kernel tar file is selected in pda.
- No other file is selected in any of other sections.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes thats exactly what i have done
The question is in the title.
Thanks in advanced.
ROMs come with their own kernel which gets flashed automatically. ....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
keithross39 said:
ROMs come with their own kernel which gets flashed automatically. ....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Click to expand...
Click to collapse
Thank you, just needed to be sure before doing anything.
raied115 said:
The question is in the title.
Thanks in advanced.
Click to expand...
Click to collapse
Nop, but if you want to have Root you can flash a custom Kernel.
Good luck
sadekmefti said:
Nop, but if you want to have Root you can flash a custom Kernel.
Good luck
Click to expand...
Click to collapse
Thank you
Hi everyone I'm using SGS2 running on Revolt ROM. How can i flash Dorimanx kernel?
gsrex said:
Hi everyone I'm using SGS2 running on Revolt ROM. How can i flash Dorimanx kernel?
Click to expand...
Click to collapse
Download the DorimanX version that suits your rom, reboot to recovery then flash the zip. Each time you flash a new copy of your rom you will need to flash the kernel again.
Dorimanx kernels can be found here:
http://dorimanx.shine.sk
Sent from my PACman GT-I9100 using xda premium
You've been around long enough to know the answer to this. Read the Dorimanx thread(s), follow the instructions. It's not rocket surgery.
AuSSiELaMbChOpS said:
Download the DorimanX version that suits your rom, reboot to recovery then flash the zip. Each time you flash a new copy of your rom you will need to flash the kernel again.
Dorimanx kernels can be found here:
http://dorimanx.shine.sk
Sent from my PACman GT-I9100 using xda premium
Click to expand...
Click to collapse
But I can't flash through recovery
gsrex said:
But I can't flash through recovery
Click to expand...
Click to collapse
Why not? You are running Revolt which has clockwork recovery?
Sent from my PACman GT-I9100 using xda premium
AuSSiELaMbChOpS said:
Why not? You are running Revolt which has clockwork recovery?
Sent from my PACman GT-I9100 using xda premium
Click to expand...
Click to collapse
Yea, I have CWM. But I can't flash. It seems like aborted
gsrex said:
Yea, I have CWM. But I can't flash. It seems like aborted
Click to expand...
Click to collapse
which version of Revolt rom ur running on ur phone for now
Sun90 said:
which version of Revolt rom ur running on ur phone for now
Click to expand...
Click to collapse
4.3
gsrex said:
4.3
Click to expand...
Click to collapse
1)check for the file size of the Dori kernel v9.xx u have dwnld'd does match with the one on the dori dwnld link site
2) also check the MD5 of the dwnld matches with the one in the link
3) ensure the kernel zip file is on the internal sdcard before flashing
Sun90 said:
1)check for the file size of the Dori kernel v9.xx u have dwnld'd does match with the one on the dori dwnld link site
2) also check the MD5 of the dwnld matches with the one in the link
3) ensure the kernel zip file is on the internal sdcard before flashing
Click to expand...
Click to collapse
All of them checked
Wait, You have kik?
Sun90 said:
1)check for the file size of the Dori kernel v9.xx u have dwnld'd does match with the one on the dori dwnld link site
2) also check the MD5 of the dwnld matches with the one in the link
3) ensure the kernel zip file is on the internal sdcard before flashing
Click to expand...
Click to collapse
Help me
gsrex said:
Help me
Click to expand...
Click to collapse
Find kernel nuke script flash then flash the kernel. Nuke script by hawkerpaul. :thumbup: if not work try dif kernel version or do a full wipe of the lot and reinstall every thing clean. Rom gapps and dori. :thumbup:
gsrex said:
Yea, I have CWM. But I can't flash. It seems like aborted
Click to expand...
Click to collapse
What is the exact error message? Should be a status number or something like that if I remember correctly.
Sent from my PACman GT-I9100 using xda premium
AuSSiELaMbChOpS said:
What is the exact error message? Should be a status number or something like that if I remember correctly.
Sent from my PACman GT-I9100 using xda premium
Click to expand...
Click to collapse
status number
gsrex said:
status number
Click to expand...
Click to collapse
Are you kidding me? I don't mind helping people out but I am starting to think you are just stuffing around.
I asked for the exact error you were getting what is the actual status number being displayed when you try and flash?
Sent from my PACman GT-I9100 using xda premium
Are you serious?
I had tried ReVolt ROM just yesterday and then i went on flashing another ROM through CWM Recovery just fine!
Do you have the file on internal (or external) sd card?
Can you first of all access CWM?!
Did you make a full wipe? (data/cache/dalvik cache)
Did you try the correct file?
You're not even giving us anything to go on. You're lucky to have experienced users try to give you answers, but still none can answer correctly since you don't even have (or don't give) a full image of your situation.
Had it been other users, this post had already been lost.
SO think about what you have, and give us anything that could make us help you easier!
Folks, it's fairly apparent what's going on here. In the absence of anything to the contrary, don't feed the troll etc etc.
running revolt rom 4.4 on my galaxy s2 i9100 with the latest dorimanx kernel... so far no problems at all
Sun90 said:
1)check for the file size of the Dori kernel v9.xx
Click to expand...
Click to collapse
dont do that buddy, its not correct, the v9.xx kernel is still in test from dorimanx, its bugged
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
gsrex said:
Hi everyone I'm using SGS2 running on Revolt ROM. How can i flash Dorimanx kernel?
Click to expand...
Click to collapse
get the dorimanx v8.34, drop it to your sdcard, go to recovery and flash it.
dont get the latest dorimanx v9.xx ... its still in test
hi im just wondering what firm ware i needed to update to jellybean from open europe oxa gingerbread, do i need to update to ics first or can i use a stock firmware?
please move my post if i've put it in the wrong place!
The post is in the right place. Do you want a sammy stock rom or a cyanogen mod?
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 09:36 AM ---------- Previous post was at 09:32 AM ----------
Sammy android 4.1.2 & Cyanogen Mod 4.3-CM 10.2, 4.2.2-CM 10.1, 4.1.2-CM 10
Sent from my GT-I9100 using xda app-developers app
just stock I think?
thanks for the reply
fish_finger01 said:
just stock I think?
thanks for the reply
Click to expand...
Click to collapse
Yes and you need a proper recovery. I suggest you a dorimanx, but watch out for the right version. The 9.xx is for cm, aokp... and the 8.xx is for stock sammy so download the right one.
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Yes and you need a proper recovery. I suggest you a dorimanx, but watch out for the right version. The 9.xx is for cm, aokp... and the 8.xx is for stock sammy so download the right one.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
ok you lost me! what is dorimanx?
all i want is to know what stock flash i need and if possible where to dl from
thanks
fish_finger01 said:
ok you lost me! what is dorimanx?
all i want is to know what stock flash i need and if possible where to dl from
thanks
Click to expand...
Click to collapse
Dorimanx is an XDA dev who works on a i9100 kernel, named after himself. I absolutely love this kernel. It's stable, highly customisable and often updated. Search XDA for it and you shall find.
So you want stock, as evidenced below:
fish_finger01 said:
just stock I think?
thanks for the reply
Click to expand...
Click to collapse
.. but then it goes pear shaped.
kona144 said:
Yes and you need a proper recovery. I suggest you a dorimanx, but watch out for the right version. The 9.xx is for cm, aokp... and the 8.xx is for stock sammy so download the right one.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
That's where it went wrong.
fish_finger01 said:
ok you lost me! what is dorimanx?
all i want is to know what stock flash i need and if possible where to dl from
thanks
Click to expand...
Click to collapse
Fish finger (hahaha) all you want is to update to the latest Samsung official firmware right? If so, forget what kona said, you don't need a recovery at all. All you need to do is to flash a stock ROM via Odin, with your phone in download mode. Where to get the ROM? Search on Samfirmware.com for a stock ROM for your country, region & carrier. Then, to flash in Odin, you can click the link in my signature and find a handy link to a tutorial from there.
Hopper8 said:
Fish finger (hahaha) all you want is to update to the latest Samsung official firmware right? If so, forget what kona said...
Click to expand...
Click to collapse
I think you've just saved his/her phone from bricking and from a lot of unnecessary steps:thumbup: