I have a razr maxx.
Having trouble installing a new rom. Not new to rooting and flashing but I am to the Motorola and safe strap. I have safestrap. 3.11 and trying to install Jellywiz. I have rooted and installed safestrap correctly. After I created a new rom slot I clear cache, dev, and factory reset. Then install the zip file. Then reboot, I see the safestrap flash screen than hit search to bypass. Then the Motorola logo pops up, goes blank then back to the safestrap screen again. Keeps going back and forth in a loop. Hopefully this made sense. Any advise would help! Thanks.
Are you on the ota that went out for jb?
Full-Throttle Team
Android Aggression Team
prsterero said:
Are you on the ota that went out for jb?
Full-Throttle Team
Android Aggression Team
Click to expand...
Click to collapse
Yes I am.
ezcape said:
Yes I am.
Click to expand...
Click to collapse
Alright there's only a couple ROMs currently running on that kernel and jellywiz isn't one of them. Look here
http://www.droidrzr.com/index.php/t...l-switch-between-jellybean-kernels-with-ease/
Use that to switch to the Christmas kernel and you can then run ROMs that haven't been updated yet
Full-Throttle Team
Android Aggression Team
They're Different??
prsterero said:
Alright there's only a couple ROMs currently running on that kernel and jellywiz isn't one of them. Look here
Use that to switch to the Christmas kernel and you can then run ROMs that haven't been updated yet
Full-Throttle Team
Android Aggression Team
Click to expand...
Click to collapse
I'm having the same problem... So the Kernel from the Christmas release differs from the OTA that was sent out this week?
stinzman said:
I'm having the same problem... So the Kernel from the Christmas release differs from the OTA that was sent out this week?
Click to expand...
Click to collapse
Correct.
Full-Throttle Team
Android Aggression Team
Related
So I have cm10 unofficial 09-26-12 installed on my razr using Safestrap 2.11.
I went back to the Motorola ICS because of the bugs that CM10 had, so now I want to update the old CM10 with the latest one 11-16-12.
However, I'm not sure if I need to update to ST v3 or would 2.11 work fine for it?
On the goo spyder section, STOCK-cm-10-20121116-UNOFFICIAL-spyder.zip
I think you must use the newest version of ST, so the 3.05.
What does the Dev say in the first post of the thread that you are going to get your rom from?
Sent from my Kindle Fire running CM10
85gallon said:
What does the Dev say in the first post of the thread that you are going to get your rom from?
Sent from my Kindle Fire running CM10
Click to expand...
Click to collapse
I'm getting from goo.im which doesn't have instructions.
i think safe strap is the best option for recovery.... the new version 3.0.5 .... and there will be further development on this recovery ....
Just sharing the information I saw today in Google+:
Motorola Droid RAZR/RAZR MAXX (XT910) and Motorola Droid RAZR (XT912) are now officially supported by CyanogenMod Team.
As they said in this post, the developers who are porting this ROM to us joined the CM family.
You can see the Device page here:
CDMA
GSM
Hope we all could enjoy it's stable release soon!
wow I have been waiting for this, very awesome. I hope we can see stable builds soon :good::good::victory:
one thing I miss is BMM compability...
Based
Sorry, but i read all and dont see if this rom is ICS based or JB. Any know? I think is ICS
Lxledesma said:
Sorry, but i read all and dont see if this rom is ICS based or JB. Any know? I think is ICS
Click to expand...
Click to collapse
It's CM10.1, based on Android 4.2.2
fredamsouza said:
It's CM10.1, based on Android 4.2.2
Click to expand...
Click to collapse
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I'm pretty sure its the ics kernel still
Full-Throttle Team
Fuzion Team
Android Aggression team
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
Per the web site: "This is for XT912 with stock ICS KERNEL ONLY!"
Awesome... hope they solve the bluetooth issue soon.
We'll likely see it stick to ICS Kernel only until a bit after the official Jelly Bean OTA, at which point you'll start to see dhacker and Hash switch things over permanently. I still can't believe that a new Motorola device is supported, much less one as locked down as Verizon has the CDMA version haha. Kudos to both dhacker and Hash for their hard work on all this.
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I have a ICS kernel and safestrap, I install this in slot 4 and works fine.
Enviado desde mi XT910 usando Tapatalk 2
Great news! I'm glad all their hard work has paid off
Running it now. Works fine although there's still no Bluetooth and no flash.
Sent from my XT910 using xda app-developers app
Nikorasu said:
Awesome... hope they solve the bluetooth issue soon.
Click to expand...
Click to collapse
The bluetooth has been my biggest pet peeve with 10.1. I really wish I could use 10.1 daily but it doesn't make sense for me without bluetooth functioning correctly.
R: CyanogenMod 10.1 becomes Officially Nightly
cschuck320 said:
The bluetooth has been my biggest pet peeve with 10.1. I really wish I could use 10.1 daily but it doesn't make sense for me without bluetooth functioning correctly.
Click to expand...
Click to collapse
+1
Sent from my XT910 using xda app-developers app
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I did it with ICS Kernel, and Safestrap 3.11 on Slot-1-2GB. Worked as expected.
fredamsouza said:
I did it with ICS Kernel, and Safestrap 3.11 on Slot-1-2GB. Worked as expected.
Click to expand...
Click to collapse
Running this with the 20th March nightly on SS3.11. Wondering if anyone has been successful getting it working under BMM or if anyone has even tried with CWM? Happy it works under SS but kind of perfer the way BMM opperates and would like to give it a go... any thoughts ??
Many thanks,
:fingers-crossed:
AW: CyanogenMod 10.1 becomes Officially Nightly
Should be working I know many people who are using bmm
Here is one example:
http://forum.xda-developers.com/showthread.php?p=39392901
Sent from my XT910 using xda app-developers app
philharmonick said:
Running this with the 20th March nightly on SS3.11. Wondering if anyone has been successful getting it working under BMM or if anyone has even tried with CWM? Happy it works under SS but kind of perfer the way BMM opperates and would like to give it a go... any thoughts ??
Click to expand...
Click to collapse
Well, I'm using it at the moment, so the current kexec official builds definitely work with BMM
JFYI, the kexec official builds also work after performing the OTA JB EU update. Just removed SS3.11 saved root with OTA Root Keeper, Flashed (held breath) booted all good.. renabled root, reinstalled SS.. booted into recovery, selected by CM10.1, wiped cache and dalvic (a few times each for good measure) rebooted and away she goes... now I've got 4.1.2 Stock and CM10.1 4.2.2 under SS. Happy Days!
working fine with bmm.there are some issues.but it is good enough for daily use.:good:
i have a couple of days looking around for an answer and nothing...
i updates to [Leaked-Ota][Cdma][4.1.2] Jelly Bean 98.72.8 (12/27/12) an obtained root
then someone told me to to just install safestrap to install custom jb roms ...
so i installed safestrap 3.05 and boom.. cant boot.. flashing roms wont work..
all i can do is get back into safestrap 3.05 where i cant be sure of the charge because it always show something different//
btw i think i have ICS stock rom backed up becaused i followed hrishi21007 tutorial on youtube
i will donate to whoever helps me restore the phone and gets me on track to flashing jb roms...
I'll apprecieate any comments. thank you
antmiu2 said:
i have a couple of days looking around for an answer and nothing...
i updates to [Leaked-Ota][Cdma][4.1.2] Jelly Bean 98.72.8 (12/27/12) an obtained root
then someone told me to to just install safestrap to install custom jb roms ...
so i installed safestrap 3.05 and boom.. cant boot.. flashing roms wont work..
all i can do is get back into safestrap 3.05 where i cant be sure of the charge because it always show something different//
btw i think i have ICS stock rom backed up becaused i followed hrishi21007 tutorial on youtube
i will donate to whoever helps me restore the phone and gets me on track to flashing jb roms...
I'll apprecieate any comments. thank you
Click to expand...
Click to collapse
If you installed the OTA update, you are now on a JB Kernel. That means your ICS backup is useless, since the razr has a locked bootloader.
It also means that any custom ROMs you install need to be built off the JB Kernel. The JB ROMs that were here before the OTA were built around the existing ICS kernel cause, again locked bootloader.
Are the ROMs you are trying to install made for the JB kernel? If not, they wouldn't boot, they are made for the ICS kernel
Draxin said:
If you installed the OTA update, you are now on a JB Kernel. That means your ICS backup is useless, since the razr has a locked bootloader.
It also means that any custom ROMs you install need to be built off the JB Kernel. The JB ROMs that were here before the OTA were built around the existing ICS kernel cause, again locked bootloader.
Are the ROMs you are trying to install made for the JB kernel? If not, they wouldn't boot, they are made for the ICS kernel
Click to expand...
Click to collapse
i guess they are built for the jb kernel and i get then from this forum:
http://www.droidrzr.com/index.php/forum/154-droid-razr-roms-for-the-ice-cream-sandwich-kernel-xt912/
did i get it right??
antmiu2 said:
i guess they are built for the jb kernel and i get then from this forum:
http://www.droidrzr.com/index.php/forum/154-droid-razr-roms-for-the-ice-cream-sandwich-kernel-xt912/
did i get it right??
Click to expand...
Click to collapse
If those are the ROM's that you are installing then, they are the wrong ones, and that is your problem. If you look at the top they say they are for the Ice cream sandwich (ICS) kernel. You will need ones for the JellyBean(JB) kernel if you installed the OTA update.
Draxin said:
If those are the ROM's that you are installing then, they are the wrong ones, and that is your problem. If you look at the top they say they are for the Ice cream sandwich (ICS) kernel. You will need ones for the JellyBean(JB) kernel if you installed the OTA update.
Click to expand...
Click to collapse
oops -_- where can i find JB kernel Roms? i need to fix this asap
antmiu2 said:
oops -_- where can i find JB kernel Roms? i need to fix this asap
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms-for-the-jelly-bean-kernel-xt912/
Make sure you read the OP and that you match any/all requirements.
Draxin said:
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms-for-the-jelly-bean-kernel-xt912/
Make sure you read the OP and that you match any/all requirements.
Click to expand...
Click to collapse
umm those are the roms that i tried ... i tried 3 of them and not boot... i think its because my version of safestrap.. most of them require 3.11 so what can i do now?
antmiu2 said:
umm those are the roms that i tried ... i tried 3 of them and not boot... i think its because my version of safestrap.. most of them require 3.11 so what can i do now?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1391900
Then you upgrade to 3.11
Draxin said:
http://forum.xda-developers.com/showthread.php?t=1391900
Then you upgrade to 3.11
Click to expand...
Click to collapse
can i updrade from safestrap itself?
because im unable to boot
antmiu2 said:
can i updrade from safestrap itself?
because im unable to boot
Click to expand...
Click to collapse
Yeah crap, I forgot it is a APK
http://www.droidrzr.com/index.php/topic/8771-romrazrcdma-flyingjelly-by-teamlitespeed/#
Have you tried this ROM? Seems to only need a v3 safestrap
Draxin said:
Yeah crap, I forgot it is a APK
http://www.droidrzr.com/index.php/topic/8771-romrazrcdma-flyingjelly-by-teamlitespeed/#
Have you tried this ROM? Seems to only need a v3 safestrap
Click to expand...
Click to collapse
just tried it with no luck,, wont get past safestrap
Any JB custom ROMs that I can flash over my ICS rom? I have the JB OTA but don't want to have to go back to a stock ICS ROM, reroot and then rebuild my system.
Wait are you currently running the ota or stock .211 ICS? The way you worded everything is throwing me off lol.
Full-Throttle Team
Android Aggression Team
http://forum.xda-developers.com/showthread.php?t=2128635
prsterero said:
Wait are you currently running the ota or stock .211 ICS? The way you worded everything is throwing me off lol.
Full-Throttle Team
Android Aggression Team
Click to expand...
Click to collapse
Sorry, I'm running a customized ICS ROM .211
deboyz1014 said:
http://forum.xda-developers.com/showthread.php?t=2128635
Click to expand...
Click to collapse
Thanks anyway.
I'm still on ICS .211, and am trying to go from ICS to JB with custom ROM. To use this linked ROM I already have to be on the JB OTA.
Just to clarify...
Can I upgrade from a custom ICS ROM to a JB ROM? I want to avoid having to reset to a stock ICS, reroot, then upgrade to JB. Is this possible? Hopefully this is more understandable.
greatbruce said:
Thanks anyway.
I'm still on ICS .211, and am trying to go from ICS to JB with custom ROM. To use this linked ROM I already have to be on the JB OTA.
Click to expand...
Click to collapse
You can use a jb ROM based on the ICS kernel but things will be broken and not work right.
Full-Throttle Team
Android Aggression Team
Hi, all! JB is looking great on my Razr, but at this point I'm in need of reverting back to the official 6.16.211 ICS version.
The main question here is, of course: is this possible? I have the Droid RAZR Utility 1.82 installed on my computer, but I'm hesitant to just use the Fastboot Restore 6.16.211 option for fear of bricking my precious phone!
Can anyone enlighten me?
Thanks so much!
SJonesGSO said:
Hi, all! JB is looking great on my Razr, but at this point I'm in need of reverting back to the official 6.16.211 ICS version....
Click to expand...
Click to collapse
It's not possible to revert back to ICS from JB -- just as it wasn't possible to revert from ICS back to GB.
When updating to JB, the bootloader signature and kernel versions change, which do not allow "downgrading" back to ICS.
cvhovey said:
It's not possible to revert back to ICS from JB -- just as it wasn't possible to revert from ICS back to GB.
When updating to JB, the bootloader signature and kernel versions change, which do not allow "downgrading" back to ICS.
Click to expand...
Click to collapse
Well, there's my question answered! Thank you very much.
To add.
I'm on JB right now. Would fastboot do the trick to get back down to ics? Or am I going to have to do it the old fashion way? (RSD)
Icharus2 said:
To add.
I'm on JB right now. Would fastboot do the trick to get back down to ics? Or am I going to have to do it the old fashion way? (RSD)
Click to expand...
Click to collapse
Really? Did you not read the very first reply in this thread? Lol
Full-Throttle Team
Android Aggression Team
prsterero said:
Really? Did you not read the very first reply in this thread? Lol
Full-Throttle Team
Android Aggression Team
Click to expand...
Click to collapse
My thoughts exactly PRS!
This is what happens when ppl don't READ THE OP . If ppl would ,they would see in big bold letters"There is no way too downgrade from this" Also why would anyone want to go back down to ICS ? If your phone is borked learn how to use the proper files to fastboot flash system. The first thing anyone should install is safestrap anyway, this protects your original system state. SMH
Strange because I have an EU Droid Razr Maxx and I erased my CID then installed vrz jb leak then reflashed the CID and reverted back to ICS EU and now I'm on EU JB.
I think VRZ JB and ICS EU have the same security version (CDT) but the new JB EU is having higher CDT (7) so there is no way back to ICS unless you flashed the EU JB ZIP instead of applying the JB EU OTA over the ICS EU.
kkhadr said:
Strange because I have an EU Droid Razr Maxx and I erased my CID then installed vrz jb leak then reflashed the CID and reverted back to ICS EU and now I'm on EU JB.
I think VRZ JB and ICS EU have the same security version (CDT) but the new JB EU is having higher CDT (7) so there is no way back to ICS unless you flashed the EU JB ZIP instead of applying the JB EU OTA over the ICS EU.
Click to expand...
Click to collapse
Nope won't work. For US version xt912