I know, everyone wants to tell me to search for it. But honestly, have you tried to "search" for it? When I go looking, I find everything but a decisive answer on how to do what I would like. SO if you'll bear with this LONG email. You'd not only be helping me, but others possibly.
Here's what I've got (I'm not all sure what you need from me so there's extra info from other screens on here - exception is I'm not posting my IMEI number)
The ROM on the phone is the new manufacturers ROM update that was made available 9/11/2009.
HTC Hero (the actual phone, not just the ROM)
Firmware: v1.5
Kernel version: 2.6.27-8dd6dee
Build number: 2.73.405.5 146733
Software version: 1.0.0.A6288
HERO CVT SHIP S-ON
HBoot 1.76.007 (HERO10000)
MicroP-010f
Touch Panel-syn0104
RADIO-6.35.06.18
I've "rooted" my phone (using "Recovery-RA-HERO-v1.2.2.img" and "flashrec-20090815.apk" - as I got told I couldn't install "flashrec-1.1.2-20090909.apk" by the phone when I tried to install it), and also used the SDK adb to push and allow permissons for su and superuser.apk.
The instructions (and videos) on theunlockr.com seemed to help me with that, and I'm a total NOOB. As now that's where I'm at. Not much further.
So what I'm looking for is how to get my apps to run of my MicroSDCard in the phone?
I've tried apps2sd and apps2sd 2 and everytimg I load apps2sd 2 it tells me that my partition on the card isn't corrent and asks me if I want to have it do it for me. Well, to continue I have to choose "Yes" and set sizes... it says "DONE" and I click on reboot now.. Nothing happens. I've left it sit on that screen for up to two hours... nothing happens. I have to hard reset my phone to get back to HOME.
OK I've seen instructions on using Paragon Partition Magic to partition my memory card. I've done that (can do that again - 4G card - 3GB fat32, 900MB Ext2, 100MB Swap - nothing seems to get recognized no matter how I grow or shrink these as apps2sd 2 still tells me it's invalid and wants to repartion now the "remaining 3GB of Fat32 space")
Why don't I try a custom ROM? Well when I did that... my SMS quick working all together. Since that's a "pretty nice feature" to have... I stepped back and went to the manufacturers ROM update that was just released. It seemed I got all the "speed" of the recent Madacco ROM and my SMS worked.
Now that 123MB space reserved for applications on a "raw" manufacuters build phone. Ya... not enough. I want to run and store my apps on my SD Card, I load a lot of games and other stuff, so by the time I'm done I've only got maybe 5MB of the 123MB left - at that point the web and everything slows WAY down.
I need some instructions on how to do this (run apps from SD Card rather than from phone) based on the configuration I currently have (or based on a ROM out there specifically for the HERO that will allow all my other features to work as well as run apps off of the SD card). The last custom rom I tried of Modacco's disabled my SMS functionality.
Not that I think it matters. I'm in the USA, running the HERO on a SMS network (CellOne or CellularOne - aka: chinookwireless.net).
Also, if anyone out there knows how to get MMS working on CellOne (cellonenation.net) on this phone... (I LOVE YOU! and would pay a small amount of $ ($20) even to you if your info "works" via paypal - I'm an honest fellow... trust me you'd get the money).
I've tried to fanagle the settings on http://www.cellonenation.com/support/ they have a link near the bottom of the page "What if you have a smart phone? (CLICK HERE)" (multiple HTC phones, none are andriod). But with no success.
Sorry for the long posts... People hate reading them... I just want some simple help... without getting slapped down for not being able to find all the info I need from "searching" the forums. Pppppplease (says roger rabbit)
Current APN Settings on the HERO HTC that I've got working Phone, Internet and SMS are:
Name: internet.chinookwireless
APN: internet.chinookwiress.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: wapgw.chinookwireless.net
MMSC: http://mms.cellonenation.net/mms/
MMS Proxy: 204.181.155.195
MMS Port:8080
MMS Protocol:Wap 2.0
MCC: 310
MNC: 570
APN Type: <not set>
None of those MMS settings seem to matter (still nothing works). I've contacted my provider. MMS is turned on and part of my calling plan. Note: CellOne doesn't sell this phone, I ordered it from Buy.COM vendor in the US it is factory unlocked. Help?
One final thing to request... The internet on CellOne is either REALLY, REALLY slow (up to 30 seconds just to load google.com (mobile version)) or there must be a better radio driver out there? How to on that would be grand as well.
http://android.modaco.com/content/htc-hero-hero-modaco-com/293461/how-to-partition-sdcard/
There are the steps I used to fix mms on the Evo 3d / VM with Jellybean- YMMV.
1) Install AO[SK]P Rom of your choice (I used Cyanogen Gangnam style 12/16) UPDATE (1/5) - this doesn't seem to work with the 1/3 vm shooter build
2) Optional - Flash GAPPS
3) remove the systems messaging app (there are probably multiple ways to do this, but I used titanium backup, and uninstalled the app)
4) reboot to recovery, and flash the zip file from here
http://androidforums.com/evo-v-4g-a...k-full-mms-fix-cm-aosp-aokp-thanks-wolfu.html
5) reboot, and then delete the /data/data/com.android.providers.telephony/databases/telephony.db and telephony.journal
6) PROFIT
If there are other methods that work - please feel free to add them to the thread.
Hope this helps someone - this was the only thing holding me back from JB.
--adrian
Subscribing
Very nice, glad peeps finally figured it out
Where is the data/data located at that you were talking about that needs deleted?
TheKnux said:
Where is the data/data located at that you were talking about that needs deleted?
Click to expand...
Click to collapse
Use the built in file manager app change the settings to root mode access and browse to that directory path.
Adrian
I did as you said, and so far nothing. Just wondering though, why you said to delete those two files? Since the link suggests mms should work without that necessity.
EDIT: Nevermind it works. No need to know how/why really. Although it seems that it's so your phone can create its own. Nonetheless, thanks!
No longer necessary on my ROM as I've fixed MMS at compile time.
私のEVO 3Dから送信される。
I'm pretty sure this doesn't work with dastin's current build (19 Jan), and I can't seem to get MMS working on this build. I'll upload a logcat if it will help, but I'm still testing things out. Gangnam is awesome, the MMS is the only tough selling point for me, if I can figure this out I'll be so happy
oh noes .. back the DB
yuruni442 said:
I'm pretty sure this doesn't work with dastin's current build (19 Jan), and I can't seem to get MMS working on this build. I'll upload a logcat if it will help, but I'm still testing things out. Gangnam is awesome, the MMS is the only tough selling point for me, if I can figure this out I'll be so happy
Click to expand...
Click to collapse
Yeah - I'm not sure what is going on either - my /data partion filled, and then the phone went crazy - I flashed on of the dastin roms, and I can't figure out which one worked.
Once I get this working - I'll update the thread.
Or just put in the APNs manually.
Original Post:
http://forum.xda-developers.com/showpost.php?p=31734989&postcount=941
Open Voice Dialer, say "Open APNs"
Virgin - MMS
Name = Virgin MMS
APN = virginmms
MMSC = http://mms.virginvibe.com.au:8002/
MMS Proxy = 202.139.83.152
MMS Port = 8070
Authentication Type = PAP
APN Type* = mms
(ONLY IF REQUIRED TO SAVE IT)
MCC: 310
MNC: 120 or 053 if it 120 doesn't work. (120=Sprint, 053=Virgin)
Leave all other fields as they are.
* Note: Some users (particularly with HTC hardware) have found that the APN Type should be left blank to get these settings working. (Leaving it blank worked for me)
Click to expand...
Click to collapse
NOTES/DISCLAIMER
This will not flash you to metro. If you need help with this message me or find me on irc. I can help you but XDA frowns upon it DON'T ASK HERE. I am not at all responsible if you die, get struck by lightning, etc.
This guide assumes you already have text/call/data working on your Evo 3D
Ok, i've been looking around for a way to get mms working on an aosp 4.2.2 rom for a long time now. I finally got it working and decided to share my info. Just to be clear i didn't develop anything here, i used the 4.2.2 cyanogenmod device profile for d2mtr on metro. Your'e gonna need to download http://www.mediafire.com/?t2nvso7yaqeixgk
GUIDE
1. Open voice dialer.
2. Say this exact phrase "OPEN APNS"
3. input these settings:
Code:
Name: metropcs
APN: internet
Proxy: Do not modify
Port: Do not modify
Username: Do not modify
Password: Do not modify
Server: Do not modify
MMSC: http://mms.metropcs.net:3128/mmsc
MMS proxy: wap.metropcs.net
MMS port: 3128
MCC: Do not modify
MNC: Do not modify
Authentication type: Do not modify
APN type: mms
APN protocol: Do not modify
APN roaming protocol: Do not modify
Bearer: Do not modify
4. Copy PressY4Pie-MMS-FIX.zip to Sdcard
5. Reboot into recovery.
6. Flash it
7. reboot,test,profit
If you need help come find me on irc. i hang out on freenode.irc.com in #OUDHitsquad. while your there thank Shabbypenguin as most of the help came from his device profile for d2mtr. Also its a good idea to clear cache and dalvik. and as always keep a backup
Thank you!!! I've been on ICS for MMS the longest waiting for someone to post 4.2.2 Metro MMS fix. About to switch over!
Sent from my PG86100 using xda app-developers app
trev23sks said:
Thank you!!! I've been on ICS for MMS the longest waiting for someone to post 4.2.2 Metro MMS fix. About to switch over!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
hey no problem. let me know how it goes
No good when I flashed the zip it wouldnt even boot up the animation screen I had to reset data
Sent from my Evo 3D CDMA using xda app-developers app
trev23sks said:
No good when I flashed the zip it wouldnt even boot up the animation screen I had to reset data
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
hm thats weird. must be that build prop thing hold on.
EDIT:
try this. You'll have to do the build.prop edits yourself. look at mpcs.sh in the zip if you dont know metro's stuff.
http://www.mediafire.com/?q448hx5s8zyy87f
you'll need to replace
Code:
ro.product.brand = sprint
with
Code:
ro.product.brand.*/ro.product.brand = metropcs
and change
Code:
ro.cdma.home.operator.numeric = 310120
to
Code:
ro.cdma.home.operator.numeric = 310027
and finally:
Code:
ro.cdma.home.operator.alpha = Sprint
to
Code:
ro.cdma.home.operator.alpha = MetroPCS
All this is, is a simple guide to get data and mms/sms working on "most" other note 3 variant 5.0 lollipop Roms. As an example, we will use darklord 2.2. This method has worked on most of the Roms that I have flashed that are not sprint based.
OK. You are going to need a few apps. APN manager and APN changer and root explorer. APN manager is a paid app, but worth it when flashing other variant's roms. When you do flash DarkLord 2.2, you will need to do so with philz recovery. It will not flash in TWRP. Once the phone boots, choose your language and when you get to the second screen asking about sharing your data usage. Check "no thanks". It should be the second option. Log in to Google play store and download those three apps. Open APN changer first. See if there is an APN already there named sprint. Even if there is or is not. You will either change a few things in it or if there is not one, you will create one. Either or, you APN should read as follows. . . . . .
NAME: APN LTE internet
APN: n.ispsn
PROXY: not set
PORT: not set
USERNAME: not set
PASSWORD: not set
SERVER: not set
MMSC: http://mms.sprintpcs.com
MULTIMEDIA MESSAGE PROXY: 68.28.31.7
MULTIMEDIA MESSAGE PORT: 80
MCC: 310
MNC: 120
AUTHENTICATION TYPE: none
APN TYPE: default,mms,dun
APN PROTOCOL: Ipv4/Ipv6
APN ROAMING PROTOCOL: Ipv4/Ipv6
TURN APN ON/OFF: should be checked but greyed out. Can not change this.
BEARER: LTE
MOBILE VIRTUAL NETWORK OPERATOR TYPE: none
MOBILE VIRTUAL NETWORK OPERATOR VALUE: not set (can't change this one either, greyed out)
https://mega.co.nz/#F!ZYoRXKYK!G8FGNN5eHXYZaNm6Mz0rSg
In this link, download all the files.
APN file
Lib file
Mms apk
Push the APN file to system/etc folder. Just replace the original file and set permissions.
Push the lib file to system/lib folder. Just replace the original file and set permissions.
Now take the mms apk and push it to system/private folder and place it in the mms folder. Just rename the original one with. bak at the end of the name. Set permissions. If you are not sure to what the permissions should be, pay attention to see what the permissions are for the file you are replacing. But I am pretty sure that all the permission settings should be as followed
RW-R--R--
Reboot. Now go back to the apn changer app and see if your apn is still there. Might be unchecked. Just tick it. Give it a few minutes and see if data starts up. If not, go to the apn manager app and scroll to the next screen to right. There will be a very long list of apn configurations of multiple carrier's. Scroll through and see if the APN2 LTE internet APN file you created is there. Should be in alphabetical order. Once you find it the vertical bar to the left of it should be green. If not, press or long press on it and you will see a heart at the top of the screen. Press it and it will save it as your preferred apn configuration. If LTE does not appear, just reboot, go back to apn changer and tick The apn that is now there and LTE will now be working. I have tried this method and shared this method with other members and it works. I am running darklord 2.2 now. Have been for a few days. Sorry There are no zips for this. If someone wants to make one, then by all means go for it.
Here is the frameworkres.apk that I modified for darklord 2.2 Push it and set permissions. It will display sprint instead of roaming indicator off. You might want to push it to the system folder first then set the permissions, then take it and push it and replace the original in the framework folder. Might put you in a boot loop if not done that way first. Thanks to @legalmoneygang for the winzip tip.
https://mega.co.nz/#!ZEZ3WRiQ!1XO-kxd6w5hwE6UqLGQhfWqsht3nssu4z3EbQvIx5qA
Must give thanks to @sac23 for being a silent teacher. I read everything that he has posted throughout all forums. He is the one that I learned about the lib file for mms. Plus I love every rom he puts out. I truly admire what he can do.
And thanks to the guys over in the international forum for the awesome darklord rom and the relentless work ethic they put forth. @nambavuong and @thereassaad and @filchi756.
Link for darklord rom
http://forum.xda-developers.com/showthread.php?p=58541391
Link for philz recovery
https://mega.co.nz/#!wBB2gYSY!cxG6rw_NWbcOIvUeo_42z1Et-zPopKE8caziiWoKjkc
These are my steps that I use, and I have flashed dang near every touchwiz rom for every note 3 variant. Once you get into the habit of this and have the needed files. This process only takes a few minutes.
Hope i have not left anything out of this lengthy so to say how to. Hope this helps. If it does, then awesome. Glad we could get it working. If it does not help. Sorry you couldn't get it to work.
Ill try your method on Sacs Ported V2 for now because when I flash DarkLord Rom I get the "no sim"
even after following OP. I cant even test your method because once it says "no sim" cant even
turn data on, says no sim, lol.
Ill report back with my results...thanks for the method though!!!
Hi,
The download files are gone? Does this work?
THanks,
Tango
Looks like lots of people are still having issues with T-Mobile Data and/or Outgoing SMS so I hope this helps. If I'm posting improperly I apologize.
1. Obtain root!
2. Open your apn settings(settings-->more networks-->mobile networks-->apn settings) create a new apn with the following properties
Name: T-Mobile
APN: fast.t-mobile.com
Proxy: blank
Username: blank
Password: blank
Server: blank
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: blank
MMS Port: blank
MMC: 310
MNC: 260
Authentication type: not set
APN Type: Default,supl,mms
APN Protocol: IPV4/IPV6
(leave all other settings default)
3. Press the menu button to save, press back and select the new apn.
4. Open Advanced signal status app(linked below) and click additional info(if you get an error install the supersu.apk, also linked below) then try again.
5. Open phone information (option 1) and change the SMSC number to +12063130004 and change network mode to GSM auto(prl) click update.
6. Open the dialer(like you're going to make a call) tap the menu button and select "Call Settings", and then "Voicemail Settings". In the text field that pops up enter +18056377243.
https://drive.google.com/folderview?id=0B8y6bIVDNMfIYkRTMWp3WVA3ODA&usp=sharing
What ROM are you using? Some variant of stock?
I'm having calling issues in the various CM versions I've tried.
edit - the GSM version of the GPE ROM works fine though. Flashed it with Danvdh's VZ kernel.
Originally on stock of1 but just flashed stang5litre but the method worked on both.
So I have to root to get MMS on to get the VZW S4 to work on T-Mobile correct?
So if I follow this guide: http://forum.xda-developers.com/galaxy-s4-verizon/general/samsung-s4-i545-verizon-of1-root-t3254434
I should be able to jump right in to your guide?
Trying to get a phone for my Mother-in-law and don't want to spend a ton(and she won't)!
brandon21486 said:
So I have to root to get MMS on to get the VZW S4 to work on T-Mobile correct?
So if I follow this guide: http://forum.xda-developers.com/galaxy-s4-verizon/general/samsung-s4-i545-verizon-of1-root-t3254434
I should be able to jump right in to your guide?
Trying to get a phone for my Mother-in-law and don't want to spend a ton(and she won't)!
Click to expand...
Click to collapse
Yes sir!
I get a screen which says "Device Locked". the message goes on to explain this is likely because the phone has been locked down by manufacturer (carrier?) and even rooted devices can have problems due to SELinux restrictions.
yaj10 said:
I get a screen which says "Device Locked". the message goes on to explain this is likely because the phone has been locked down by manufacturer (carrier?) and even rooted devices can have problems due to SELinux restrictions.
Click to expand...
Click to collapse
If you see that message it's because the su binary is not high enough. Install the apk in the same folder that is linked in the OP, open supersu and update if needed then try again after rebooting.
Thanks. I got it to work. Looks like the SMSC number needs to be re-entered after each reboot and texting doesn't work in LTE mode, but looks easy enough to toggle back and forth when necessary.
yaj10 said:
Thanks. I got it to work. Looks like the SMSC number needs to be re-entered after each reboot and texting doesn't work in LTE mode, but looks easy enough to toggle back and forth when necessary.
Click to expand...
Click to collapse
Glad it's working for you. I haven't experienced the rebooting problem though. Do you have any other network apps that may be auto setting the smsc number at boot?
yaj10 said:
Thanks. I got it to work. Looks like the SMSC number needs to be re-entered after each reboot and texting doesn't work in LTE mode, but looks easy enough to toggle back and forth when necessary.
Click to expand...
Click to collapse
n3rdy13 said:
Glad it's working for you. I haven't experienced the rebooting problem though. Do you have any other network apps that may be auto setting the smsc number at boot?
Click to expand...
Click to collapse
Yeah I have the same problem of having to re-enter the SMSC number after every reboot too and I'm not sure of the culprit. Would love to know if there is a way to permanently change this so I don't have to fiddle with it every time
alexgm12 said:
Yeah I have the same problem of having to re-enter the SMSC number after every reboot too and I'm not sure of the culprit. Would love to know if there is a way to permanently change this so I don't have to fiddle with it every time
Click to expand...
Click to collapse
Check under your mobile network settings, make sure network mode isn't set to global. It should say gsm/umts. You may want to re apply settings after changing modes. I noticed the global setting screwed up my tmobile settings so hopefully it's related to your issues.(fingers crossed)
n3rdy13 said:
Looks like lots of people are still having issues with T-Mobile Data and/or Outgoing SMS so I hope this helps. If I'm posting improperly I apologize.
1. Obtain root!
2. Open your apn settings(settings-->more networks-->mobile networks-->apn settings) create a new apn with the following properties
Name: T-Mobile
APN: epc.tmobile.com or fast.t-mobile.com
Proxy: blank
Username: blank
Password: blank
Server: blank
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: blank
MMS Port:blank
MMC: 310
MNC: 260
Authentication type: not set
APN Type: Internet+MMS
APN Protocol: WAP 2.0
3. SAVE AND THEN SELECT THE APN YOU JUST CREATED, then
4. Open Advanced signal status app(linked below) and click additional info(if you get an error install the supersu.apk, also linked below) then try again.
5. Open phone information (option 1) and change the SMSC number to +12063130004 and change network mode to GSM auto(prl) click update and BOOOM! You have full service....
Would you happen to know how I can get my S4 to work with Cricket?
Click to expand...
Click to collapse
blackra1n said:
n3rdy13 said:
Looks like lots of people are still having issues with T-Mobile Data and/or Outgoing SMS so I hope this helps. If I'm posting improperly I apologize.
1. Obtain root!
2. Open your apn settings(settings-->more networks-->mobile networks-->apn settings) create a new apn with the following properties
Name: T-Mobile
APN: epc.tmobile.com or fast.t-mobile.com
Proxy: blank
Username: blank
Password: blank
Server: blank
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: blank
MMS Port:blank
MMC: 310
MNC: 260
Authentication type: not set
APN Type: Internet+MMS
APN Protocol: WAP 2.0
3. SAVE AND THEN SELECT THE APN YOU JUST CREATED, then
4. Open Advanced signal status app(linked below) and click additional info(if you get an error install the supersu.apk, also linked below) then try again.
5. Open phone information (option 1) and change the SMSC number to +12063130004 and change network mode to GSM auto(prl) click update and BOOOM! You have full service....
Would you happen to know how I can get my S4 to work with Cricket?
Click to expand...
Click to collapse
Does it recognize a tmobile sim? If so what network functions, if any, can you use?
Click to expand...
Click to collapse
I followed your guide for my dad's verizon s4 but I am running into some problems.
I rooted it following the root guide linked earlier in this thread and root is successful. SuperSu is installed and root checker verified.
However, in my APN settings, under APN Type, i have to manually type in "Internet+MMS", and the under APN Protocol, the only choices are ipv4, ipv6, ipv4/ipv6.
Also, when I open the advanced signal status app, do i select the LTE/GSM (PRL), is that what you meant?
edit: even just selecting GSM auto (prl), i still cant get 3g, 4g, or LTE. Only edge.
shutfu said:
I followed your guide for my dad's verizon s4 but I am running into some problems.
I rooted it following the root guide linked earlier in this thread and root is successful. SuperSu is installed and root checker verified.
However, in my APN settings, under APN Type, i have to manually type in "Internet+MMS", and the under APN Protocol, the only choices are ipv4, ipv6, ipv4/ipv6.
Also, when I open the advanced signal status app, do i select the LTE/GSM (PRL), is that what you meant?
edit: even just selecting GSM auto (prl), i still cant get 3g, 4g, or LTE. Only edge.
Click to expand...
Click to collapse
Having to manually enter your apn type is normal. I have "internet, mms, supl" typed into mine. The problem you are having with the app being locked is because your version of the su binary isn't correct. Install the supersu app that is included in the OP. Before doing anything else you will need to open the newly installed supersu app and allow the binary to update. After it has updated immediately reboot and it should no longer be locked. Also back under the APN settings, don't mess with the ipv4/ipv6 settings. Just leave them at default.
When I get to APN protocol, it's not giving me the option "WAP 2.0".... Only IPv4, IPv6, and then IPv4/IPv6.
Also not giving me the option to save the newly created APN. What to do next?
imboutthat said:
When I get to APN protocol, it's not giving me the option "WAP 2.0".... Only IPv4, IPv6, and then IPv4/IPv6.
Also not giving me the option to save the newly created APN. What to do next?
Click to expand...
Click to collapse
Sorry about the APN, I copied it but didn't proof read.
I have mine set to IPV4/IPV6. To save the APN you need to press the menu key then select save.
n3rdy13 said:
If you see that message it's because the su binary is not high enough. Install the apk in the same folder that is linked in the OP, open supersu and update if needed then try again after rebooting.
Click to expand...
Click to collapse
I've also received this error about the device being locked. but to be honest, I don't understand what you mean by install the APK in same folder as the link you posted. I'm a lost noob out here folks lol. Help. I hella wanna get this thing to work properly.
imboutthat said:
I've also received this error about the device being locked. but to be honest, I don't understand what you mean by install the APK in same folder as the link you posted. I'm a lost noob out here folks lol. Help. I hella wanna get this thing to work properly.
Click to expand...
Click to collapse
At the bottom of the tutorial is a link to a google drive folder with two apk files. Download them and open them on your phone to start the install. After installing "supersu.apk" click open and accept the upgrade, click normal when asked what method to use then reboot when it prompts. The lock will be gone.
n3rdy13 said:
At the bottom of the tutorial is a link to a google drive folder with two apk files. Download them and open them on your phone to start the install. After installing "supersu.apk" click open and accept the upgrade, click normal when asked what method to use then reboot when it prompts. The lock will be gone.
Click to expand...
Click to collapse
Great, thanks alot man that actually worked perfectly. Another question though... so in order to do what we just did, You have to have absolute root access to your phone right? i opened a terminal emulator app and notice that i still have the dollar sign on the command line. But when i run "su", it has the hash symbol which i'm assuming means i'm root now or at least have root privileges. Shouldn't i have had the hash symbol as soon as i started the emulator? does this mean my su binary is still not high enough?