Hello, I'm new.............sorry for my bad english!
Some days ago I bought an OTG cable to connect a pendrive to my phone.
It doesn't work.
I think that 5380i doesn't support this type of connection.
Is there a program or a workaround to make it possible??
I downloaded this file from the forum, but I'm not sure that it works, and I don't want to damage my phone.
kernel_usbhost_build3_jvugalaxys.zip
Thank you for any answers
post your questions in right section..there is a q&a section for our acei and also there is help thread in the stickies..!
anyways, since u have asked, our phone doesn't support otg. .
-HellRaiser- said:
and OTG has been tried before at galaxy y thread but no sucess till now.....the power supplied to the usb port is not suffient to run usb devices without external power source.....
Click to expand...
Click to collapse
srt99 said:
post your questions in right section..there is a q&a section for our acei and also there is help thread in the stickies..!
anyways, since u have asked, our phone doesn't support otg. .
Click to expand...
Click to collapse
Sorry for the bad "section" but you are using, in this forum, is a very difficoult "slang" for me and I understand only a little.
Anyway I see, my phone can't support this feature.
Thank You
Related
Hi every one ,
In Android we have every thing were impossible in any other headset .
but there is some thing I can't do using Android , I want to use the internet from the pc on the mobile using the usb cable because i don't have wireless in the current time right here .
If any one could do this , please help me and tell me why .
thanks for your attention ,
bye
ELRAKAWY said:
Hi every one ,
In Android we have every thing were impossible in any other headset .
but there is some thing I can't do using Android , I want to use the internet from the pc on the mobile using the usb cable because i don't have wireless in the current time right here .
If any one could do this , please help me and tell me why .
thanks for your attention ,
bye
Click to expand...
Click to collapse
Yes, this is possible - It is called Reverse Tethering. See here: http://forum.xda-developers.com/showthread.php?t=1371345.
If you're using Windows system on your PC, you can see my post:
http://forum.xda-developers.com/showthread.php?t=1429734 , you need root your phone first.
however, some applications does not work (or work well) with USB net.
It was fast to surf the net when you use the USB cable.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
lovetide said:
If you're using Windows system on your PC, you can see my post:
http://forum.xda-developers.com/showthread.php?t=1429734 , you need root your phone first.
however, some applications does not work (or work well) with USB net.
Click to expand...
Click to collapse
thanks man it might help but not now maybe tomorrow I can apply that solution , at all thannks very much .
Does the SGA support USB OTG ?? any hacks or workarounds??
1.Try to search before asking such questions which are answered several times.
2. Answer : Currently no support for OTG.
Currently not. Need to patch kernel with modified driver. Nexus one and ZTE blade got the driver, but i've failed miserably to apply it, got nasty error in kernel headers
Sent from your phone
amit, i didn't find any prior posts...thank you
an0nym0us_ thanks buddy....
jonathanpeter said:
amit, i didn't find any prior posts...thank you
Click to expand...
Click to collapse
got something
never the less you got your answer from one who was trying...
don't have otg cable personally to try out
"Sorry - no matches. Please try some different terms." got that ...haha!!
guys I brought a usb otg cable yesterday. I tried to connect pen drive it is not working but mouse and keyboard are working fine can somebody tell me how connect flash drive and what are the requirements and which kernel supports otg feature.....thanks
Try to download USB OTG Helper, then connect your flash drive, open the app and hit the mount button. It's working for me with Rage kernel and ICS
yeah, u need a app for that. Search in the market or as k.joco said
I tried but it is saying that drivers not found
MustaqAhmed said:
I tried but it is saying that drivers not found
Click to expand...
Click to collapse
Help me.guys
MustaqAhmed said:
I tried but it is saying that drivers not found
Click to expand...
Click to collapse
That happend with me too... It looks like not all flash drives are compatible. Try testing with other flash disks n see..
Sent from my SK17i using xda app-developers app
Hardware problem
I think your problem is a hardware problem.
I bought a cable with mini at one end and female usb on the other end, i guess is the same as you got.
It wasnt working at first and I had to strip open the mini tip of the cable to short pin 4 and 5 so the phone would recognize host mode.
Search for how to do a otg cable on the forum.
*****NOT SURE IF THATS YOUR PROBLEM****** but it happened to me so....
Good luck.
mousemeat said:
I think your problem is a hardware problem.
I bought a cable with mini at one end and female usb on the other end, i guess is the same as you got.
It wasnt working at first and I had to strip open the mini tip of the cable to short pin 4 and 5 so the phone would recognize host mode.
Search for how to do a otg cable on the forum.
*****NOT SURE IF THATS YOUR PROBLEM****** but it happened to me so....
Good luck.
Click to expand...
Click to collapse
I have Nokia ca 157 cable do I need to do the same. and which file system.should be there fat32 or ntfs
MustaqAhmed said:
guys I brought a usb otg cable yesterday. I tried to connect pen drive it is not working but mouse and keyboard are working fine can somebody tell me how connect flash drive and what are the requirements and which kernel supports otg feature.....thanks
Click to expand...
Click to collapse
You need to root your phone:good:
and the attached file.
mousemeat said:
I think your problem is a hardware problem.
I bought a cable with mini at one end and female usb on the other end, i guess is the same as you got.
It wasnt working at first and I had to strip open the mini tip of the cable to short pin 4 and 5 so the phone would recognize host mode.
Search for how to do a otg cable on the forum.
*****NOT SURE IF THATS YOUR PROBLEM****** but it happened to me so....
Good luck.
Click to expand...
Click to collapse
[email protected] said:
You need to root your phone:good:
and the attached file.
Click to expand...
Click to collapse
my.phone is already rooted. I tried this app.not working
MustaqAhmed said:
my.phone is already rooted. I tried this app.not working
Click to expand...
Click to collapse
(ROOT+BUSYBOX)
FXP kernels don't support USB OTG by the way. And high memory (power-consuming)
flash drives cannot be detected. So if you hadn't, better try a 2 or 4gb drive.
If that doesn't work then I'm curious to know your phone model, ROM and kernel combo.
[email protected] said:
(ROOT+BUSYBOX)
FXP kernels don't support USB OTG by the way. And high memory (power-consuming)
flash drives cannot be detected. So if you hadn't, better try a 2 or 4gb drive.
If that doesn't work then I'm curious to know your phone model, ROM and kernel combo.
Click to expand...
Click to collapse
I have lww, real ics 6, rage kernel. I.have seen many tutorials they say that I need to short pin 4 and 5 of my otg cable is that true...
MustaqAhmed said:
I have lww, real ics 6, rage kernel. I.have seen many tutorials they say that I need to short pin 4 and 5 of my otg cable is that true...
Click to expand...
Click to collapse
They should work. Sorry, i don't know anything about shorting pins 'cause i bought sony's cable and it works without shorting anything.
XMP here
Hi
Did you install proper kernel modules?
What do your log say?
requeriments:
You need:
- ROOT
- Busybox
-one of these two
- USB Mass Storage Watcher OTG (com.skidmrk.umswatcherotg) <--- in google play
- Usb Host Controller
or you can try this http://forum.xda-developers.com/showthread.php?t=1588940
mousemeat said:
I think your problem is a hardware problem.
I bought a cable with mini at one end and female usb on the other end, i guess is the same as you got.
It wasnt working at first and I had to strip open the mini tip of the cable to short pin 4 and 5 so the phone would recognize host mode.
Search for how to do a otg cable on the forum.
*****NOT SURE IF THATS YOUR PROBLEM****** but it happened to me so....
Good luck.
Click to expand...
Click to collapse
No root is required , I have gingerbread stock rom and not rooted ....like I said.....your cable is not shorted.....
---------- Post added at 11:51 PM ---------- Previous post was at 11:43 PM ----------
MustaqAhmed said:
I have Nokia ca 157 cable do I need to do the same. and which file system.should be there fat32 or ntfs
Click to expand...
Click to collapse
Dude, the only thing I know is that the cable I use is for xperia and is the same as samsung right..I dont know about nokia cables....
I know that the cable I use for the xperia is a 5 pin cable...
Try it out dude...its not gonna kill you...how much is a cable anyway...5 bucks????
Open that sh*t up and do it! dont be afraid! lol
mousemeat said:
No root is required , I have gingerbread stock rom and not rooted ....like I said.....your cable is not shorted.....
Click to expand...
Click to collapse
No root? Strange
Jus check with another flash disk first!!
Sent from my SK17i using xda app-developers app
thanks I'll try whatever u all said
mousemeat said:
No root is required , I have gingerbread stock rom and not rooted ....like I said.....your cable is not shorted.....
---------- Post added at 11:51 PM ---------- Previous post was at 11:43 PM ----------
Dude, the only thing I know is that the cable I use is for xperia and is the same as samsung right..I dont know about nokia cables....
I know that the cable I use for the xperia is a 5 pin cable...
Try it out dude...its not gonna kill you...how much is a cable anyway...5 bucks????
Open that sh*t up and do it! dont be afraid! lol
Click to expand...
Click to collapse
dude u should have root privilege.
Does X10 mini support usb host ? Can I connent 5V to for example a flash or mouse and D+,D- to my device?
No
AW: USB host in x10 mini
reza1376 said:
Does X10 mini support usb host ? Can I connent 5V to for example a flash or mouse and D+,D- to my device?
Click to expand...
Click to collapse
I think all minicm7-based ROMs support usb hosting... Of course, before being able to use minicm7, you will have to unlock your bootloader, flash a new kernel, etc.
If you don't understand what I just said, search the x10 mini forums, there are many tutorials regarding this...
Please press thanks if I helped .
Kilroy. said:
I think all minicm7-based ROMs support usb hosting... Of course, before being able to use minicm7, you will have to unlock your bootloader, flash a new kernel, etc.
If you don't understand what I just said, search the x10 mini forums, there are many tutorials regarding this...
Please press thanks if I helped .
Click to expand...
Click to collapse
What is the circuit for the cable ?
reza1376 said:
What is the circuit for the cable ?
Click to expand...
Click to collapse
There is a thread in the x10mini pro dev section for usb-host, with circuitry for the cable, but it won't work, it's not android related, it's just that our phones don't have a usb-host controller. They were trying to work around it but i think they've given up. Our phones don't have power-out on the usb-port for certain, so you would have to use an external power-source, but even then i doubt it works.
reza1376 said:
What is the circuit for the cable ?
Click to expand...
Click to collapse
Oh, sorry.
I just read the thread SmG67 was talking about, and it didn´t work, afterall . Sorry again.
Can´t you use WIFI tethering? I know that definitely works.
SmG67 said:
There is a thread in the x10mini pro dev section for usb-host, with circuitry for the cable, but it won't work, it's not android related, it's just that our phones don't have a usb-host controller. They were trying to work around it but i think they've given up. Our phones don't have power-out on the usb-port for certain, so you would have to use an external power-source, but even then i doubt it works.
Click to expand...
Click to collapse
What is the circuit with external power?
reza1376 said:
Does X10 mini support usb host ? Can I connent 5V to for example a flash or mouse and D+,D- to my device?
Click to expand...
Click to collapse
nope.. i already made usb otg with power supply from computer but this is not work.
i think hardware limitation
does the otg work after root?
Githu said:
does the otg work after root?
Click to expand...
Click to collapse
Please don't create new thread for every question. There's already Moto E : Questions will be answered thread in General section. Ask there and your question shall be answered by anyone.
Githu said:
does the otg work after root?
Click to expand...
Click to collapse
Haven't tested. But its unlikely that it will work with just root. There might be some modifications needed. Provided the port on Moto E can deliver sufficient power, if it doesn't additional power and a y-cable might be required.
Just traversing possibilities.
Mrtoxicgamer10 said:
Please don't create new thread for every question. There's already Moto E : Questions will be answered thread in General section. Ask there and your question shall be answered by anyone.
Click to expand...
Click to collapse
Well, I think asking a question in the Q&A section is preferable. That's what this sub-forum is for. Also, having a thread for question is better for indexing and search results than a misc question thread.
So, unless the question is been in FAQs, or one of the pinned guides, this is where it belongs.
Mrtoxicgamer10 said:
Please don't create new thread for every question. There's already Moto E : Questions will be answered thread in General section. Ask there and your question shall be answered by anyone.
Click to expand...
Click to collapse
Brother the section title says Q&A he posted at the right place!
---------- Post added at 08:59 PM ---------- Previous post was at 08:57 PM ----------
Githu said:
does the otg work after root?
Click to expand...
Click to collapse
EDIT:Read it the first time as OTA
lol
Sorry bro
But I also think you will need some more tweak to make OTG work!
OTG not working after root
My phone is rooted. I tried to connect external drive through OTG cable, but not working.
kramkumar said:
My phone is rooted. I tried to connect external drive through OTG cable, but not working.
Click to expand...
Click to collapse
But External Hard Drives require more power than the nomal pen drives .. So it won't run !
I also own a MOTO E (1st Gen.)
kramkumar said:
My phone is rooted. I tried to connect external drive through OTG cable, but not working.
Click to expand...
Click to collapse
try using stick mount etc and connect a PENDRIVE