My phone system e-mails me my voicemails as WAV file attachments (doesn't support anything else). Apparently WP8 does not natively support playback of these files. I have installed an app that will play them but it doesn't seem to be accessible from within the e-mail app. Anyone have a suggestion on how to playback WAV received in an e-mail?
I can directly play them from the email attachment.. No need for additional apps..
Just tap it once to download the *.wav attachment and when the download finished tap it again to play the *.wav file...
Evidently there are a few different WAV encoding or encapsulations. Not every voicemail system uses the same one. In fact, Windows Phone 7 used to play a friend of mine's voicemail system's WAV files just fine, but his new Windows Phone 8 won't.
If you find a WAV that works, and one that doesn't, opening it in something like Audacity can tell you if there is something funky like a bit rate or some other audio compression CODEC that might render it unplayable. Doesn't help unless they can convert to MP3 or something...
There are tons of threads about this over here:
http://answers.microsoft.com/en-us/...42-3298-4b2e-8be4-db3dc2cbc53f?page=~pagenum~
Great...I'm NEVER going to get my users off iPhone as long as I have to hunt down workarounds for simple things like this.
Voice mails on WAVE?
That is such a waste of bandwidth, when the same could've been done on mp3 or amr format.
But seriously, why all this limitations with file formats on Windows Phone 8? It is ridiculous.
Same issue here. Really shameful and makes me wonder why I trusted MS and WP8 in the first place.
WAV is just a container format, like AVI. Most of the time, WAV is used for uncompressed PCM data, but it's possible to shove pretty much anything in there, including MP3 and various oddball formats. Saying that a given piece of software doesn't play back WAV is an invalid complaint. Figure out what's inside the WAV file, and then complain about that.
Related
Hi
I wonder if anyone can tell me... how to play mp3 files and movie files say avi , mpg etc with the new windows media 8.5? I don't seem to be able to use the xda to play a simple mp3 file after I use activesync to transfer the file into the xda. It may a be simple software problem or do I need special codecs for these files to be played?
Sorry if it is a silly question.
Cheers
Hi, if you have the pocket pc 2002, and windows media player 8.5, you should be able to play mp3 files without any issue.
Try downloading a small mp3 file from the net to check. sometimes, if you dont have an SD card, and only a limited memory, and you try and copy a large mp3 to your xda, it cuts off half way when you run out of storage memory. This leaves your file corrupted, and hence you cant play it.
Close all your running apps. Adjust your memory settings, to increase storage area. Choose an mp3 file that is much smaller than available space (eg. ringtone from some website) and copy that to your xda.
Thanks
Hi
Thanks very much for your reply. Thot nobody is interested to answer a silly question like that. Indeed I think the mp3 file I tried to play is corrupted. Got windows media player to play other smaller mp3 files after your advice. However, can windows media player play mpg files at all? Always seem to get message that the movie file cannot be played.
Thanks again.
Smaslift
Hi
cant remember if media player 8.5 can play mpgs. However if you install pocket divx player, you should be able to play most file formats. Ofcourse it wont play all mpgs, or all avis, it depends on the codecs used, however common ones, especially divx are playable.
http://www.projectmayo.com/projects/detail.php?projectId=9
Just to let you know, Media player 8.5 can't play mpeg.
PocketTV is another alternative.
movie file size
HI
Thanks for info. Installed both pocket tv and divx and both are great. Only thing is size of movie files are too big. I have tried using VirtualDub to play around with movie compression but still hasn't found the optimal size to reduce a movie to be sensible for use in pdas. What is the screen size and how else besides the screen size can one use to reduce movie file size?
Cheers
Some good guides here:
http://www.pocketmatrix.com/guides/
Hi
In virtual dub, you need to ensure that you are specifying a codec for video compression AND audio compression.By default virtualdub does not compress the audio, hence the file tends to be quite large.
You may want to install some more audio codecs to give you a better compression. Try installing the WMA codecs, or get Windows Media player 9 on your system.
WMA codes
Hi
Thanks for replies. I have Windows Media 9 on my system; how to use it to get the audio compression with Virtual Dub?
Cheers
Vic
in the audio menu on virtuadub, you need to select Full Processing Mode. Then the compression option will become selectable. You can then pick an audio codec. Be aware not all audio codecs will be available on your xda. Use Windows Media Audio codecs, have a look at:
http://www.dbpoweramp.com/codec-central-wma.htm
does anyone know how to use mp3 files as ring tones? is it possible?
you need to use Mp3 to wav converter and convert the mp3 to a wav file, then put the wav file under \Windows\Rings and it will work...but take note, its pretty big after conversion to wav
hence why i wanted to use mp3s as ringtones rather than wavs in the first place
Is there no way that you can trick the software into accepting the mp3 file as a wav?! Ive tried using a .wav extention, but that doenst seem to work either.
Jeenious said:
hence why i wanted to use mp3s as ringtones rather than wavs in the first place
Is there no way that you can trick the software into accepting the mp3 file as a wav?! Ive tried using a .wav extention, but that doenst seem to work either.
Click to expand...
Click to collapse
not possible at all...you must put the wav into Windows\Rings directory then go to select the ring tone as your default ringing tone..it should work just fine
Ofcourse it wouldn't be that hard for someone like the maker of PhonExt to create a program that wil let you run whatever you want when someone calls...
you can convert them to WMA which it makes the files smaller than MP3 and they sound just as good. that is of course if you have WM2003
You can use dbpowerAmp.com to convert the wav files into smaller bitrate, mono channels etc. This will make the file sizes much smaller... however, quality will start to suffer.
Yorch said:
you can convert them to WMA which it makes the files smaller than MP3 and they sound just as good. that is of course if you have WM2003
Click to expand...
Click to collapse
Yorch, what program do you use to convert the mp3 files to wma??
brilliant then! problem solved. i can just use WMA.
I convert mp3s to WMA via "Windows Movie Maker". Simply drag the mp3 onto the timeline, then save the "movie" as a WMA.
dbpowerAmp is an excellent solution (and FREE) and super easier to use. Now if you happen to have the XP Plus Media Edition, it comes with a little prog that lets you convert audio back and forth, very easy.
By the way anything that you convert to 64Kbps on a WMA will come with excellent quality as a ringtone.
You can also use the free Windows Media Encoder to convert Mp3 to wma.
With this great utility you can also directly convert all your movies ,divx etc to wmv pocket pc format!!!
http://www.microsoft.com/windows/windowsmedia/9series/encoder/default.aspx
Jeenious said:
does anyone know how to use mp3 files as ring tones? is it possible?
Click to expand...
Click to collapse
There is not a piece of software for ppc2002 that does is job good.
Simply convert them to wav with this great tool
:lol: 8)
Wow!
three years later
:lol:
hello all i got my phone today.
How can i put my own ringtones on it.
I am not sure of the file types i need or anything. I dont even know where to go to select what tone i want. please help
if you want to use ringtones for specific contacts (e.g. a sound will play and when you hear it you'll know it's from your friend joe) then you'll need third party software such as ringtonex (mtux). ain't free though; i forgot how much i paid for it but i've been using the app back when i started with my xda1. still using it up to now. like the ringtone i use for my boss is the pacman sound when he dies...
for ringtone types; wav files are the ones you need...however you can also use midi and wma if i remember. if your unit is on activesync with your pc; simply copy and paste the wav file you want into the xda's windows folder. this will allow the ringtone to be used by other apps such as alarms or sms notification. or you can also paste it in the window's "rings" folder where the phone will automatically recognize the file as being a ring tone option. then just go to settings for the phone and click on that file you want to use.
hope that helps.
thanx a million worked like a charm
hey its not finding wma files though
i read somewhere in the forum that you can use wma files as ringtones...just don't know how to do them and never really tried. not sure about this but most wma files i know are associated with mp3s as well. wma is a lower quality sound alternative to mp3s; i have wma files for songs and they range from 800-900kb as oposed to 3+ meg mp3 song files. so the way i see it (and i could be wrong about this) to use a wma file the xda would have to be able to get it from the memory or the storage card (?). but that would mean having a wma ring tone which is around 900kb in size...something that you don't really need coz eventually you will answer the phone after like 10 seconds. so no point in having the whole song as a ringtone really since you won't get to hear it to the end. that is if the other chaps in the forum are doing something different that is wayyyy easier than i really think it is
what i did was record bits of a song i have on storage; then use that as my ringtone. example; i have an mp3 of fernanda porto and i like the opening sequence. what i did was use my notes app; ran the song through media player and when the part i liked came i then recorded it. the file is in wav so it was easy to use it as a ringtone....
cheers
it need to be 2003 before it can use wma
they need to be put in windows\rings
you then add them with the program called add ringtones
in settings
ahh i dont have 2003, i was told 2003 is better not to have cause it messes up alot or something i dunno.
The office I work at uses IP Office for voice mail and sends emails thru our Exchange server. I can't play the voice mail message when it arrives on my phone (Droid X2, Android 2.2.2). The file attached is in .wav format.
Properties of the .wav file generated are: Bit Rate 128 kbps, Audio Sample Size 16 bit, Channels 1 (mono), Audio Sample Rate 8kHz, Audio Format PCM.
I'd also like to use some .mid files as ringtones/alert sounds but the system won't play them.
I am using the stock player and WinAmp.
I've read on other forums that this might be a Froyo specific problem but I don't know. Any ideas if Gingerbread will fix this?
wav files are generally not supported on Andorid as the codec requires licensing fees. For best compatibility use OGG files or MP3s.
cvmaas said:
wav files are generally not supported on Andorid as the codec requires licensing fees. For best compatibility use OGG files or MP3s.
Click to expand...
Click to collapse
I was reading some comments elsewhere this morning and that it is a Froyo problem. 2.1 worked as did previous builds. The ability to play .wavs was broken in 2.2. I did find a workaround with Remote Wave Free in Market. But regardless of licensing fees, the ability to play .wavs is needed in the corporate sector with the various voice mail systems. In many cases, voice mails are received by users as an attachment to an email generated from the office and people rely on getting them. If they can't play them, then they will migrate to a Blackberry or an iPhone which is a loss of Android market share.
wav file attachments
zeb carter said:
The office I work at uses IP Office for voice mail and sends emails thru our Exchange server. I can't play the voice mail message when it arrives on my phone (Droid X2, Android 2.2.2). The file attached is in .wav format.
Properties of the .wav file generated are: Bit Rate 128 kbps, Audio Sample Size 16 bit, Channels 1 (mono), Audio Sample Rate 8kHz, Audio Format PCM.
I'd also like to use some .mid files as ringtones/alert sounds but the system won't play them.
I am using the stock player and WinAmp.
I've read on other forums that this might be a Froyo specific problem but I don't know. Any ideas if Gingerbread will fix this?
Click to expand...
Click to collapse
Have you tried to save the file first and then play it? Try it.
bowhunter said:
Have you tried to save the file first and then play it? Try it.
Click to expand...
Click to collapse
I did that initially. That did not work.
playing wav files
zeb carter said:
I did that initially. That did not work.
Click to expand...
Click to collapse
Zeb, did you use the media player to play or try to play it in gmail? The Gmail app does have a problem playing wav files as attachments.
I don't use gmail in a corporate setting. Synced directly with our Exchange server. Stock play and Winamp can't play them. But Remote wave free did.
Evening everyone, I have spent the last 20 hours of my life confused and beyond angry at Google Music. Missing Tags repeat albums and don't even get me started on the album art work missing. I am OCD about my music library, always have been that's why (when I used that god awful software) during my iTunes years I meticulously spent hours fixing genres adding art work and capitalizing the correct letters in titles artists and albums, spent hours downloading HQ album covers and all was well. Unfortunately for me none of that corrected info actually gets tagged in the actual file the metadata remains unedited and no artwork actually becomes embedded Tunes just simply says OK that's what you want to see for that song but only of course on Apple's devices. So I was left with all these files from which were jumbled up in Mp4 and Mp3 and WAV some with artwork some without.
So Yesterday I began the process of figuring out how to finally organize all of my music once and for all so that Google Music would show album art correct names yada yada yada. I then thought to myself I am sure of it that many others would like to see how I did it so that they too could enjoy a perfect Library on Google's wonderful streaming service, or off the SD card. I will say this is extraordinarily time consuming but since I am making this guide it should at least allow you to cut an hour or two digging for software and generally wanting to tear your hair out in frustration over figuring out why the hell the metadata editor wont edit the files or show up in the directory. So gentlemen and ladies alike here are my efforts in order to finally have a perfect music library forever.
Software you will need
ID3 - This is the program that allows you to edit the metadata and provide proper naming and artwork
http://www.nch.com.au/tageditor/index.html
Mp4 - Mp3 Converter - As Itunes and Apple are stupid and use a stupid file codec the Mp4 metadata cannot be directly edited The Tag editor can only edit when the files are Mp3( if you never used itunes you may be able to skip this) .
http://download.cnet.com/Free-M4a-t...7723.html?tag=dropDownForm;productListing;pop
1.) First will want to convert all non Mp3 formatted files into Mp3. You can either edit and convert together ( I would not recommend this) or you can queue everything that needs to be converted first. That is what I would do.
Sub Step a.) While it is converting go to Google and Image search all the album covers you will need and put the cover art .jpg into the folder for the album to which it belongs 500 x 500 pixels is perfect size for album covers and is the most widely used size for these images.
2.) While it is converting go to Google Music and delete your Library( NOTE that you better only delete things that you have the file for) I take no responsibility for you deleting music and then never getting it back that's on you. I have all my music in a specific folder and knew I could delete it. Also take note that DRM music from ITunes cannot be edited or uploaded. ( I paid well over a hundred bucks to Apple to get what I could DRM free) Once you have a clean slate you can allow the converting process to finish.
3.) Once you have your converted files you can go into your music folder location and see that you will now have duplicates of the files that were converted(One being Mp4 and the new Mp3 file). Create a new folder for your new files. What I mean by this is take all the Mp4 files( don't delete them just in case you still need it) and separate the Mp4 Files and Mp3 Files into new folders for example:
Folder 1 ( band Name: Mp4)
Folder 2 ( Band Name: Mp3)
THIS IS HUGELY IMPORTANT
if you do not separate the files you will upload duplicates to Google Music and it will default to the previous file leading you back to where you started (I did this and almost threw my computer out the window from frustration) Also leave the Cover art you downloaded in the Mp3 folder not the mp4 which will make adding the cover art much quicker
4.) Now that you have your library converted and separated the new and old files you will have an Mp3 Library and an Mp4 library( I know it blows to have identical folders but its just how it is and will make sure your library is as organized as possible and keep you from loosing your tunes.)
5.) Open the Stamp editor and you should now be able to edit all the Metadata you want using the program.
I am about to start Homework check back here later tonight or tomorrow for screenshots and tips to make this easier.
Quick Tip - this is how my Music Directory is organized
folder Named after artist
Sub folder contains Albums
Each Album is a sub folder containing the Google Image we downloaded earlier and the Mp3 Files to which will be edited ( I HIGH SUGGEST FOLLOWING THIS)
Very nice guide! im ocd about my music library too. I wish i could've just hired somebody to fix my whole library instead of wasting 20+ hours trying to. :crying:
I thought about it yesterday when I was doing all of this, A company that would organize music would probably be very profitable. Im not sure how you would structure paying but it would be a smart idea.
Thanks for the guide! Here's some things I found useful when dealing with my own library: (unfortunately I can't post links because I'm a new user, but all of these can be found as the top link when you google them)
mp3tag is a very powerful tag editor, and very easy to use for batch operations.
id3remover can completely remove all metadata from a file. I found this useful because sometimes files have tags that editing programs can't read but will mess up library sorting in Google Music or your music player.
Album Art Exchange is a great website for very high quality and high resolution album art.
Thanks for the guide - I've been meaning to do this for a while (I also fell victim to iTunes not editing the actual metadata but remembering the tags in its own devious way), and I may actually do it now.
However, I was wondering - is the conversion from mp4 or from m4a to mp3 entirely lossless? If not, is there an easy way to edit the metadata on m4a files?
Also, my music is about two thirds flac (my classical music) and the rest mostly m4a and some mp3. Will the tag editor work for flac files? (I of course cannot convert them to mp3).
Also, another slightly related question: I have been looking since I first got a phone for a music player in which I can set up the library the way I want.
That would be like this: first, I select a genre (Classical, Joshua Bell, Русские песни (Russian songs), Chansons françaises (French songs), or Other.
If I select Classical, I can choose to go to composers and then to albums, to artists and then to albums, or directly to albums.
If I select Joshua Bell, I can choose to go to composers and then to albums or directly to albums.
If I select Русские песни or Chansons françaises, it will go to artists and then to albums.
If I select Other, it will go directly to a list of albums.
So far, I have always just used folder players, but I will thank immensely anyone who finds a player that I can set up like this, that can also play flac files and is generally usable.
(Really - I will thank all of the posts you've made, or at least all that I can thank in 15 minutes of uninterrupted thanking).
Max725 said:
Thanks for the guide - I've been meaning to do this for a while (I also fell victim to iTunes not editing the actual metadata but remembering the tags in its own devious way), and I may actually do it now.
However, I was wondering - is the conversion from mp4 or from m4a to mp3 entirely lossless? If not, is there an easy way to edit the metadata on m4a files?
Also, my music is about two thirds flac (my classical music) and the rest mostly m4a and some mp3. Will the tag editor work for flac files? (I of course cannot convert them to mp3).
Also, another slightly related question: I have been looking since I first got a phone for a music player in which I can set up the library the way I want.
That would be like this: first, I select a genre (Classical, Joshua Bell, Русские песни (Russian songs), Chansons françaises (French songs), or Other.
If I select Classical, I can choose to go to composers and then to albums, to artists and then to albums, or directly to albums.
If I select Joshua Bell, I can choose to go to composers and then to albums or directly to albums.
If I select Русские песни or Chansons françaises, it will go to artists and then to albums.
If I select Other, it will go directly to a list of albums.
So far, I have always just used folder players, but I will thank immensely anyone who finds a player that I can set up like this, that can also play flac files and is generally usable.
(Really - I will thank all of the posts you've made, or at least all that I can thank in 15 minutes of uninterrupted thanking).
Click to expand...
Click to collapse
I did not find anything that allowed for editing mp4 metadata(the DRM was to blame I believe). If I did it wasn't free which is why I ended up doing this in such a backwards way(spent an hour or so trying to find the software I used). There are flac to mp3 converters which I believe I saw on CNET. So you could in theory do this still but you would need to convert two different file types so it will just take longer.
As for You're second question I think "I think" poweramp allows for the kind of hierarchy control you are looking for. It also has the most options, auto album art work updater, and the best eq.
Sent from my Rezound using xda app-developers app
zkrp5108 said:
I did not find anything that allowed for editing mp4 metadata(the DRM was to blame I believe). If I did it wasn't free which is why I ended up doing this in such a backwards way(spent an hour or so trying to find the software I used). There are flac to mp3 converters which I believe I saw on CNET. So you could in theory do this still but you would need to convert two different file types so it will just take longer.
As for You're second question I think "I think" poweramp allows for the kind of hierarchy control you are looking for. It also has the most options, auto album art work updater, and the best eq.
Click to expand...
Click to collapse
What about m4a? And the reason I don't want to convert flac files is that flac is lossless. It has all the same information as a native wav file, but it somehow takes up a little less space, although much more than mp3. The flac codec is open source and all, so I don't see why there should be problems editing metadata in flac files, I just haven't looked which specific programs can do it.
And I tried Poweramp, but didn't see any settings for genre-specific hierarchy - you can choose to have it show genres-artists-albums or genre-albums or anything like that, but you can't make it different for each genre. By the way, I really don't care about options or eq - I believe that classical music should be heard exactly as in the natural performance, and I trust the professional sound editors whose job it is to optimize all the different instruments and ranges in the other songs I have. In fact, I have currently settled on EZ Folder Player, which just opens to a specified folder, from which I can navigate through the folders I set up to any album or song and play it. I believe it has no eq or sound settings at all.
I'm pretty sure that the mp4 and m4a files are both convertable using the program but I'm not sure lol. This was specifically to aid those that used iTunes in the past but switched to android and Google music' and how to add tags to mp3 files that people download from the internet. As for the hierarchy your looking for power amp allows folder browsing add well. But not in a custom way like your looking for. Sorry I couldn't be more helpful on that subject if I come across something I'll be sure to put an answer here for you.
As for your distaste to EQ all headphones are different because they produce different ohms and the studio quality sound the engineers get in the studio are on headphones that are studio quality I used to work in a f film department and trust me consumer grade headphones don't even compare. The eq just allows me to tailor my music b based on the pair of headphones I'm using on a given day.
Sent from my Nexus 7 using xda app-developers app
redwaldo said:
Thanks for the guide! Here's some things I found useful when dealing with my own library: (unfortunately I can't post links because I'm a new user, but all of these can be found as the top link when you google them)
mp3tag is a very powerful tag editor, and very easy to use for batch operations.
id3remover can completely remove all metadata from a file. I found this useful because sometimes files have tags that editing programs can't read but will mess up library sorting in Google Music or your music player.
Album Art Exchange is a great website for very high quality and high resolution album art.
Click to expand...
Click to collapse
+1 on mp3tag, I use it all the time on my collection. You can drag a folder over it and it just loads all the tags for you for updating/reviewing/modification. You can mass update tags like album, artist, etc. You can also use the tags to rename the files.
dBpoweramp - Swiss army knife of file conversion, it integrates into the windows right click menu, highlight your tracks, right click, convert to, pick your format and settings and go. It's multithreaded and will use all your cores to convert also. http://www.dbpoweramp.com/dmc.htm It's a little pricey but it makes things so easy. It is fully functional for trial use if you want to test it beforehand.
Did this awhile ago, ended up up just using media monkey to organize and found a lot of the meta data myself.
Sent from my ADR6425LVW using Tapatalk 2