Related
I didn't want to post this until I thoroughly tested it, but I've not been able to install any new roms. Here's what I've tried:
liquid
slimbean 2.9
eclipse
cookies and cream
and jelly beer
My process is as follows:
Backup
Wipe system 3 times
Wipe dalvic 3 times
Wipe cache 3 times
Format system 3 times
Install rom, gaaps, kernel
Wipe dalvic & cache
Reboot system
My results have all been the same:
2 vibrations
2 Samsung splash screens
Boot animation
Black screen with soft keys lit.
I have verified the downloads on each rom that I've tried and I'm stumped as to why my process is rendering me with a black screen.
Any suggestions are welcome, but please keep in mind that I have verified ALL of the downloads (usually by download them several times).
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Try flashing without the kernel. What happens? It may be the kernel bricking the phone
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
All right ill give that a shot thanks.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Can you verify you still have root?
Right rom for the right phone (i717 vs N7000)?
Try removing the SD card when flashing, for some reason this works on others phones.
Ok only installing the rom and gaaps didn't work, I tried it on slimbean 2.9 and liquid (yes I know these roms are all from the same dev)
Yes I verified that I was installing I717 roms and not n7000 roms, but I don't know how to verify that I'm still rooted?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Update your recovery. TWRP is best IMO.
Gubment Cheeze
---------- Post added at 11:53 AM ---------- Previous post was at 11:43 AM ----------
http://teamw.in/project/twrp2/96
Give this a shot. I downloaded also and about to flash. Hope this helped.
Gubment Cheeze
---------- Post added at 12:12 PM ---------- Previous post was at 11:53 AM ----------
This version of TWRP working like a champ. Happy flashing!
Gubment Cheeze
What roostercruiser said. Cwm is a thing of the past. Twrp will get the job done.
Sent from cheezeney land.
Ok I'm gonna try the updated TWRP though I'm pretty sure I'm on the latest version. I'll report back and thanks for all the suggestions.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Ok I updated the TWRP and did a clean install of 2.9 with just the rom and the gaaps and it did load successfully, I'm about to load the oc kernel and see if that goes well.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Ok I'm able to install all of the above mentioned roms without the oc kernels suggested in the thread by the OP, but as soon as I try to install the kernel I end right back up at two splah screens, a boot ani, and the black screen with sofkeys lit. Any other suggestions?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Try this, start from scratch. Do factory reset, 3x, Wipe cache and dalvik then Flash ROM. Do a full reboot. Before you flash gapps wipe cache and dalvik again, then flash gapps. Do another full reboot. Go back to recovery and wipe cache and dalvik again, then flash oc kernal and then reboot.
Gubment Cheeze
Ok rooster, I'm gonna give that a try now, thanks!
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
If that doesn't work, I would check the oc kernel MD5. If you're able to flash ROM and Gapps but the kernel makes it haywire- maybe you got a bad download on the kernel.
Gubment Cheeze
Yeah I verified the md5 and my downloads are known good as they work on other roms, but I'll give them another download just to be thorough.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Just out of curiosity, what kernel are u flashing?
Sent from cheezeney land. Gotham style.
Flapjaxx-JB-Kernelv1.1
And
KingKangersOne v1.1
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Theres ur problem bro. Update that kernal. U update kernel, no more black screen.
Sent from cheezeney land. Gotham style.
---------- Post added at 07:17 PM ---------- Previous post was at 07:15 PM ----------
http://forum.xda-developers.com/showthread.php?t=1870835
Sent from cheezeney land. Gotham style.
---------- Post added at 07:20 PM ---------- Previous post was at 07:17 PM ----------
Here flappys. http://goo.im/devs/flappjaxxx/i717/kernel/JB/h0tcakez-JB-Kernel-v2.3.5.zip
Sent from cheezeney land. Gotham style.
Yep that was it, thanks everyone for your help!
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
What is there to format when installing roms? I have never formatted anything but my external sd card a times or two and then outside of the phone..
Hello Guys,
my s2 GT-19100 is rooted with original 4.1.2 and CRW. Everything works fine...then I found an update from SUSuperUser App in PlayStore to upgrade from 0.99 to 1.25. After I downloaded and installed this update, su asks me to install in NORMAL or CRW mode...so I choose CRW.
Phone rebooted but no nothing happens...I tried everything VOL-UP+Power+Main-Button...no reaction...put battery out and in...no reaction :
Please help me...what do I have to do now?
Why update in Cwm mide when you can update in android.
Pull out battery 5 min
Then try to charge for a while.
Then try again
Sent from my GT-I9100 using Tapatalk 2
After I opened the app, it first asks me to update binaries...i clicked YES. After that there comes another install/update procedure...not the update procedure from play store...to install SU and there were 2 options (NORMAL OR CWM)...I remembered I uses CWM while rooting my phone so I took that option...and SU reboots my phone and now nothing works...
Ok I will try
Some kind of a brick... try that if doesnt work you need an USB jig to force it to download mode
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:30 AM ---------- Previous post was at 09:24 AM ----------
Or make your own
https://www.google.com/url?sa=t&sou...kA-nVqunjl9Fi1Uzw&sig2=txwptMrTjFzSkt4A1ihDuA
Sent from my GT-I9100 using Tapatalk 2
Charging does not work...but I can get in download mode with VOLDOWN+POWER+MAINBUTTON...that works and show me
Code:
ODIN MODE
PRODUCT NAME: GT-i9100
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: CUSTOM
Downloading...
Do not turn off target !!
Re--Flash the kernel via ODIN ?
Flash siyah v6 beta5 tar från siyah homepage
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:43 AM ---------- Previous post was at 09:43 AM ----------
Then just restart
Sent from my GT-I9100 using Tapatalk 2
But I have original 4.1.2 JB and it works? and where is it? Yesterday at rooting I used another kernel... i am confused
Omg listen to what i say. Just use kernel that i told you. Its Jelly Bean compatible.
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:54 AM ---------- Previous post was at 09:53 AM ----------
Search siyah kernel google and you will see a link called gorkhanmoral i think
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Downloaf TAR file its for odin. Dont unzip.
Choose pda in odin and flash
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
You can use either Siyah, Dorimanx or Philz kernel
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:00 AM ---------- Previous post was at 09:58 AM ----------
You previous root was wrong thats why you softbricked
Sent from my GT-I9100 using Tapatalk 2
ok I will do that now...
I uses jeboo kernel
OK its done...now it opens:
Android system recovery (3e)
options:
- reboot system now
- apply update from external storage
- wipe data/factory reset
- wipe cache partition
- apply update from cache
- test redbend fota[FS]
E:bad option "fs_options=loop"
can't unmount /system (no such file or directory)
What are you do in cwm?
Just restart phone when flashed kernel
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:14 AM ---------- Previous post was at 10:14 AM ----------
I dont realy understand what you are doing
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:17 AM ---------- Previous post was at 10:14 AM ----------
I dont think you listening carefully.
You said that you updated your SUPERSU and choose for some reason CWM and you bricked it.
Then you said you can use Downloadmode. Fine its not hardbrick.
Then you said youre on stock JB 4.1.2 and rooted with annother kernel. OK
Now you flashed siyah and then you get into Recovery? Why do you do that.
Why dont you just restart the phone and it will boot into android. Why WIPE?
These options come automatically after flashing siyah and reboot by odin. Now my phone loads again...yeeeeeeah it works
Do I have to remove/uninstall the old jeboo kernel? And if yes, HOW ?
Thank you so much
nordlicht85 said:
These options come automatically after flashing siyah and reboot by odin. Now my phone loads again...yeeeeeeah it works
Do I have to remove/uninstall the old jeboo kernel? And if yes, HOW ?
Thank you so much
Click to expand...
Click to collapse
No you dont need to uninstall. You kernel is removed automaticly by kernel you just flashed. And in that case Siyah or wich one you choose.
Glad that it works
What is the cm10.1 stuff on the same post on siyah homepage? Do I need this also ?
nordlicht85 said:
What is the cm10.1 stuff on the same post on siyah homepage? Do I need this also ?
Click to expand...
Click to collapse
NO. CM10 is Custom Rom version. Its compatible with Siyah. So CM10 is not a kernel its a ROM
Siyah , Dorimanx and Philz is KERNELS you just flashed to get root acess and Clockworkmod recovery to flash custom ROMS
But now you have yellow triangle when you start you S2 dont you?
Remove it with app called Triangle Away.
Yes I have this triangel...but is this bad or just a picture?
nordlicht85 said:
Yes I have this triangel...but is this bad or just a picture?
Click to expand...
Click to collapse
No not bad. It just showing you that phone is flashed with something CUSTOM like CUSTOM ROM or Custom Kernel.
Do you have MSN or Something. I can give you Triangle Away app and you can reset the counter
I'm stock at firmware upgrade encounter and i'm trying to unroot and bring it back to stock. tried flashing stock images and still no luck. Can someone please help me
Soldi3rxx said:
I'm stock at firmware upgrade encounter and i'm trying to unroot and bring it back to stock. tried flashing stock images and still no luck. Can someone please help me
Click to expand...
Click to collapse
A little more info may help.. but I'm assuming your phone was possibly MK2 build? Where did you get the stock file from and is it the full wipe?
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
What have you done to get to this point? "Unroot" and using Odin are two different things
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
---------- Post added at 09:26 PM ---------- Previous post was at 09:05 PM ----------
Alright. Go here for the MK2 stock image.
http://forum.xda-developers.com/showthread.php?t=2578209
Make sure you have the correct USB Drivers and preferably use the USB cable that came with the S4.
If the no wipe doesn't work.. Try the full wipe..
I'm going out on a limb since you haven't replied back yet. But if you're on a Verizon S4 with SafeStrap then really you can't go wrong with using the MK2 file.
If you need anymore help let me know
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
Unfortunatly I Wipe my SYSTEM in Recovery mode(cwm). And now my device only stuck with Bootanimation. I was not enable USB DEBUGGING before wipe my System. My Nan'backup won't Restore due to cwm5.x.(& key combination isn't working). I don't want to download StockFrameware of 400-700 mb's. How can I recover my Brick device. Guyz, have you any solution.???
Flashthisfirst.zip is the sol.
Sent from my GT-S5282 using Tapatalk
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
Its available in gernal section
Sent from my GT-S5282 using Tapatalk
Plz help more
akshaygalaxystarmod said:
Flashthisfirst.zip is the sol.
Sent from my GT-S5282 using Tapatalk
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
Its available in gernal section
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
hey bro, I'm not able to flash flashthisfirst.zip., because I can't turn my phone in Recovery mode. My device only stuck with Bootani and nothing. I've nan'backup. Is this Helpful to me.!!! And I think, inside my device(os) there is no STOCK FILEs, is it possible.!!! Please bro, do something for me.
Rooted ?
Sent from my GT-S5282 using Tapatalk
---------- Post added at 11:33 AM ---------- Previous post was at 11:33 AM ----------
If rooted download rom manegar fron play store and open app and go to recovery mod
Sent from my GT-S5282 using Tapatalk
Hungryhacker said:
Unfortunatly I Wipe my SYSTEM in Recovery mode(cwm). And now my device only stuck with Bootanimation. I was not enable USB DEBUGGING before wipe my System. My Nan'backup won't Restore due to cwm5.x.(& key combination isn't working). I don't want to download StockFrameware of 400-700 mb's. How can I recover my Brick device. Guyz, have you any solution.???
Click to expand...
Click to collapse
this myt help u
http://forum.xda-developers.com/showthread.php?t=2669771
the method above will require downloading stock
u will have to download stock
if u r worried about losing data
u can use titanium backup to restore data from the cwm backup
after flashing stock
flash cwm 6.x to reduce future problems
Sent from my GT-S5282 using Tapatalk
---------- Post added at 05:29 PM ---------- Previous post was at 05:28 PM ----------
also u got bootloop because factory reset in cwm 5.x is buggy
the best way to fix bootloop is
flash stock recovery and then clear data
Sent from my GT-S5282 using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:29 PM ----------
Hungryhacker said:
Unfortunatly I Wipe my SYSTEM in Recovery mode(cwm). And now my device only stuck with Bootanimation. I was not enable USB DEBUGGING before wipe my System. My Nan'backup won't Restore due to cwm5.x.(& key combination isn't working). I don't want to download StockFrameware of 400-700 mb's. How can I recover my Brick device. Guyz, have you any solution.???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2760647
get stock recovery (4mb) from here
and flash it
then go to stock recovery and factory reset
Sent from my GT-S5282 using Tapatalk
So here's the story..
I recently decided to root my Galaxy s6 Edge 6.0.1. The root worked fine.
However, I found out that it caused the default phone app to not work properly. I could call and receive calls, but neither of us could hear each other.
I downloaded this one app that can modify system apps. I went to the phone app, backed it up, deleted, and tried to re install. However.. It failed me. It would not let me use the backup I had created, and just let me to the google play store.
After trying so many things to fix it, I ended up just removing the root, and factory reset my phone. Now I have a new problem. It wont even let me call anyone. It tells me "Unfortunately com.android.phone has stopped working". Now I tested it to see if it was the actual phone. I downloaded WhatsApp and tried calling from there. It worked fine, and I could hear the other person and they could hear me. Which lead me to believe that it was a problem with the systems phone.
Is there anyway to get that back? What can I do? Please help, I literally just voided my warranty 24 hours ago and now it's about to bite me in the ass....
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
pickles523 said:
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
1. Reflash entire stock rom via odin
Sent from my SM-G925P using Tapatalk
pickles523 said:
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Which are? I'm prepared to do anything lol. This is really pissing me off.
pickles523 said:
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
1. Reflash entire stock rom via odin
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
2. Or someone creates a flashable zip that can reinstall the stock phone dialer.
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
I will make a flashable zip of mine for you to flash via twrp if you want to try that first
Sent from my SM-G925P using Tapatalk
pickles523 said:
2. Or someone creates a flashable zip that can reinstall the stock phone dialer.
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
I will make a flashable zip of mine for you to flash via twrp if you want to try that first
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Well Currently installing the stock firmware. Have a bit of time before that's downloaded, But I found this: (Except with my model instead of OP's) http://thedroidguy.com/2015/08/flas...sung-galaxy-s6-to-fix-rebooting-issue-1048633
Is this what you're talking about?
You just need sammobile to get your firmware
Sent from my SM-G925P using Tapatalk