I didn't want to post this until I thoroughly tested it, but I've not been able to install any new roms. Here's what I've tried:
liquid
slimbean 2.9
eclipse
cookies and cream
and jelly beer
My process is as follows:
Backup
Wipe system 3 times
Wipe dalvic 3 times
Wipe cache 3 times
Format system 3 times
Install rom, gaaps, kernel
Wipe dalvic & cache
Reboot system
My results have all been the same:
2 vibrations
2 Samsung splash screens
Boot animation
Black screen with soft keys lit.
I have verified the downloads on each rom that I've tried and I'm stumped as to why my process is rendering me with a black screen.
Any suggestions are welcome, but please keep in mind that I have verified ALL of the downloads (usually by download them several times).
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Try flashing without the kernel. What happens? It may be the kernel bricking the phone
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
All right ill give that a shot thanks.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Can you verify you still have root?
Right rom for the right phone (i717 vs N7000)?
Try removing the SD card when flashing, for some reason this works on others phones.
Ok only installing the rom and gaaps didn't work, I tried it on slimbean 2.9 and liquid (yes I know these roms are all from the same dev)
Yes I verified that I was installing I717 roms and not n7000 roms, but I don't know how to verify that I'm still rooted?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Update your recovery. TWRP is best IMO.
Gubment Cheeze
---------- Post added at 11:53 AM ---------- Previous post was at 11:43 AM ----------
http://teamw.in/project/twrp2/96
Give this a shot. I downloaded also and about to flash. Hope this helped.
Gubment Cheeze
---------- Post added at 12:12 PM ---------- Previous post was at 11:53 AM ----------
This version of TWRP working like a champ. Happy flashing!
Gubment Cheeze
What roostercruiser said. Cwm is a thing of the past. Twrp will get the job done.
Sent from cheezeney land.
Ok I'm gonna try the updated TWRP though I'm pretty sure I'm on the latest version. I'll report back and thanks for all the suggestions.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Ok I updated the TWRP and did a clean install of 2.9 with just the rom and the gaaps and it did load successfully, I'm about to load the oc kernel and see if that goes well.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Ok I'm able to install all of the above mentioned roms without the oc kernels suggested in the thread by the OP, but as soon as I try to install the kernel I end right back up at two splah screens, a boot ani, and the black screen with sofkeys lit. Any other suggestions?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Try this, start from scratch. Do factory reset, 3x, Wipe cache and dalvik then Flash ROM. Do a full reboot. Before you flash gapps wipe cache and dalvik again, then flash gapps. Do another full reboot. Go back to recovery and wipe cache and dalvik again, then flash oc kernal and then reboot.
Gubment Cheeze
Ok rooster, I'm gonna give that a try now, thanks!
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
If that doesn't work, I would check the oc kernel MD5. If you're able to flash ROM and Gapps but the kernel makes it haywire- maybe you got a bad download on the kernel.
Gubment Cheeze
Yeah I verified the md5 and my downloads are known good as they work on other roms, but I'll give them another download just to be thorough.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Just out of curiosity, what kernel are u flashing?
Sent from cheezeney land. Gotham style.
Flapjaxx-JB-Kernelv1.1
And
KingKangersOne v1.1
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Theres ur problem bro. Update that kernal. U update kernel, no more black screen.
Sent from cheezeney land. Gotham style.
---------- Post added at 07:17 PM ---------- Previous post was at 07:15 PM ----------
http://forum.xda-developers.com/showthread.php?t=1870835
Sent from cheezeney land. Gotham style.
---------- Post added at 07:20 PM ---------- Previous post was at 07:17 PM ----------
Here flappys. http://goo.im/devs/flappjaxxx/i717/kernel/JB/h0tcakez-JB-Kernel-v2.3.5.zip
Sent from cheezeney land. Gotham style.
Yep that was it, thanks everyone for your help!
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
What is there to format when installing roms? I have never formatted anything but my external sd card a times or two and then outside of the phone..
Related
When you install this room:
http://forum.xda-developers.com/showthread.php?t=1767916&page=45
Remains hanging on the phone logo remics-ux
ameer96 said:
When you install this room:
http://forum.xda-developers.com/showthread.php?t=1767916&page=45
Remains hanging on the phone logo remics-ux
Click to expand...
Click to collapse
Have You flashed the kernel?
It has been proved the kernelIt has been proved the kernel
??????????????????????????????
Have you flashed the appropriate kernel provided in the rom topic? This is the kernel you need to flash for this rom http://forum.xda-developers.com/showpost.php?p=26601669&postcount=15
Sent from my Flying MM X10 using xda premium
---------- Post added at 11:06 PM ---------- Previous post was at 11:02 PM ----------
Also you could try amins cm7&9 kernel here's the link http://forum.xda-developers.com/showthread.php?p=31060706 this might work on this rom not 100% sure
Sent from my Flying MM X10 using xda premium
ameer96 said:
It has been proved the kernelIt has been proved the kernel
Click to expand...
Click to collapse
Hehe, now everybody understands you
Sent from my X10i using xda app-developers app
installed the kernel, but did not change thing
Did you do a full wipe in recovery before installing rom?
Sent from my Flying MM X10 using xda premium
Yes I did
Lets start from the beginning - reflash kernel supplied in rom topic then boot into recovery then do factory reset/full wipe then wipe cache then go into advanced and wipe dalvik cache then go into mounts and storage and format system and cache and data then mount cache data and system then install the rom let it finish then reboot back into recovery and flash the fix aswell then reboot phone and try that leave for at least 20 minutes if not booting just to make sure if it still isn't booting then take battery out and leave for 1minute put back in then boot back into recovery and wipe dalvik cache again and cache then reboot phone and try if not then I say your phone doesn't like the rom at all and try a different rom
Sent from my Flying MM X10 using xda premium
There is no problem in installing the kernel, but when you install the room remains hanging on the phone logo remics-ux
Like I said start from the beginning and do all the steps I said in previous post and reply with the outcome
Sent from my Flying MM X10 using xda premium
---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------
Also don't flash any addons apart from fix after rebooting phone after rom install because this can cause bootloop
Sent from my Flying MM X10 using xda premium
I have downloaded the ROM successfully but another problem emerged, which is that the usb does not function
Another problem is that the wifi does not function
The problem is resolved usb but not left into solve the problem of the wifi
Read 3rd post in rom topic wifi fix is there might fix USB aswell not sure but please when flashing a rom make sure you read everything in the topic that the developer states that's how alot of these topics come up as instructions and extra info has not been followed
Sent from my Flying MM X10 using xda premium
Can you give me a wifi fix
Knowing I carried the file in this link, but did not solve the problem:http://forum.xda-developers.com/showpost.php?p=26601669&postcount=15
http://forum.xda-developers.com/attachment.php?attachmentid=1168653&d=1341125320 wifi fix for rom TAKEN FROM 3RD POST of topic as I originally stated flash that kernel should fix it if not use a different rom
Download that file and extract it to find the kernel ftf file put in firmware folder on flashtools and flash it ok
Sent from my Flying MM X10 using xda premium
---------- Post added at 07:58 PM ---------- Previous post was at 07:56 PM ----------
Original quote from myself
dunc4n88 said:
Read 3rd post in rom topic wifi fix is there might fix USB aswell not sure but please when flashing a rom make sure you read everything in the topic that the developer states that's how alot of these topics come up as instructions and extra info has not been followed
Sent from my Flying MM X10 using xda premium
Click to expand...
Click to collapse
not succeeded the way
Hello Guys,
my s2 GT-19100 is rooted with original 4.1.2 and CRW. Everything works fine...then I found an update from SUSuperUser App in PlayStore to upgrade from 0.99 to 1.25. After I downloaded and installed this update, su asks me to install in NORMAL or CRW mode...so I choose CRW.
Phone rebooted but no nothing happens...I tried everything VOL-UP+Power+Main-Button...no reaction...put battery out and in...no reaction :
Please help me...what do I have to do now?
Why update in Cwm mide when you can update in android.
Pull out battery 5 min
Then try to charge for a while.
Then try again
Sent from my GT-I9100 using Tapatalk 2
After I opened the app, it first asks me to update binaries...i clicked YES. After that there comes another install/update procedure...not the update procedure from play store...to install SU and there were 2 options (NORMAL OR CWM)...I remembered I uses CWM while rooting my phone so I took that option...and SU reboots my phone and now nothing works...
Ok I will try
Some kind of a brick... try that if doesnt work you need an USB jig to force it to download mode
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:30 AM ---------- Previous post was at 09:24 AM ----------
Or make your own
https://www.google.com/url?sa=t&sou...kA-nVqunjl9Fi1Uzw&sig2=txwptMrTjFzSkt4A1ihDuA
Sent from my GT-I9100 using Tapatalk 2
Charging does not work...but I can get in download mode with VOLDOWN+POWER+MAINBUTTON...that works and show me
Code:
ODIN MODE
PRODUCT NAME: GT-i9100
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: CUSTOM
Downloading...
Do not turn off target !!
Re--Flash the kernel via ODIN ?
Flash siyah v6 beta5 tar från siyah homepage
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:43 AM ---------- Previous post was at 09:43 AM ----------
Then just restart
Sent from my GT-I9100 using Tapatalk 2
But I have original 4.1.2 JB and it works? and where is it? Yesterday at rooting I used another kernel... i am confused
Omg listen to what i say. Just use kernel that i told you. Its Jelly Bean compatible.
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:54 AM ---------- Previous post was at 09:53 AM ----------
Search siyah kernel google and you will see a link called gorkhanmoral i think
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Downloaf TAR file its for odin. Dont unzip.
Choose pda in odin and flash
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
You can use either Siyah, Dorimanx or Philz kernel
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:00 AM ---------- Previous post was at 09:58 AM ----------
You previous root was wrong thats why you softbricked
Sent from my GT-I9100 using Tapatalk 2
ok I will do that now...
I uses jeboo kernel
OK its done...now it opens:
Android system recovery (3e)
options:
- reboot system now
- apply update from external storage
- wipe data/factory reset
- wipe cache partition
- apply update from cache
- test redbend fota[FS]
E:bad option "fs_options=loop"
can't unmount /system (no such file or directory)
What are you do in cwm?
Just restart phone when flashed kernel
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:14 AM ---------- Previous post was at 10:14 AM ----------
I dont realy understand what you are doing
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:17 AM ---------- Previous post was at 10:14 AM ----------
I dont think you listening carefully.
You said that you updated your SUPERSU and choose for some reason CWM and you bricked it.
Then you said you can use Downloadmode. Fine its not hardbrick.
Then you said youre on stock JB 4.1.2 and rooted with annother kernel. OK
Now you flashed siyah and then you get into Recovery? Why do you do that.
Why dont you just restart the phone and it will boot into android. Why WIPE?
These options come automatically after flashing siyah and reboot by odin. Now my phone loads again...yeeeeeeah it works
Do I have to remove/uninstall the old jeboo kernel? And if yes, HOW ?
Thank you so much
nordlicht85 said:
These options come automatically after flashing siyah and reboot by odin. Now my phone loads again...yeeeeeeah it works
Do I have to remove/uninstall the old jeboo kernel? And if yes, HOW ?
Thank you so much
Click to expand...
Click to collapse
No you dont need to uninstall. You kernel is removed automaticly by kernel you just flashed. And in that case Siyah or wich one you choose.
Glad that it works
What is the cm10.1 stuff on the same post on siyah homepage? Do I need this also ?
nordlicht85 said:
What is the cm10.1 stuff on the same post on siyah homepage? Do I need this also ?
Click to expand...
Click to collapse
NO. CM10 is Custom Rom version. Its compatible with Siyah. So CM10 is not a kernel its a ROM
Siyah , Dorimanx and Philz is KERNELS you just flashed to get root acess and Clockworkmod recovery to flash custom ROMS
But now you have yellow triangle when you start you S2 dont you?
Remove it with app called Triangle Away.
Yes I have this triangel...but is this bad or just a picture?
nordlicht85 said:
Yes I have this triangel...but is this bad or just a picture?
Click to expand...
Click to collapse
No not bad. It just showing you that phone is flashed with something CUSTOM like CUSTOM ROM or Custom Kernel.
Do you have MSN or Something. I can give you Triangle Away app and you can reset the counter
So phone froze today while using Eclipse ROM - did a battery pull and now phone just boot loops.
I am able to get into recover/flash new zip/reboot --- but no matter what ROM i flash it just boot loops.
Any help would be appreciated.
Thanks.
Factory reset or restore a backup
Sent from my SCH-I605 using Tapatalk 2
---------- Post added at 03:03 AM ---------- Previous post was at 02:54 AM ----------
Maybe try a new kernel. I'm on the latest saber and Eclipse is flawless
Sent from my SCH-I605 using Tapatalk 2
I'm stock at firmware upgrade encounter and i'm trying to unroot and bring it back to stock. tried flashing stock images and still no luck. Can someone please help me
Soldi3rxx said:
I'm stock at firmware upgrade encounter and i'm trying to unroot and bring it back to stock. tried flashing stock images and still no luck. Can someone please help me
Click to expand...
Click to collapse
A little more info may help.. but I'm assuming your phone was possibly MK2 build? Where did you get the stock file from and is it the full wipe?
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
What have you done to get to this point? "Unroot" and using Odin are two different things
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
---------- Post added at 09:26 PM ---------- Previous post was at 09:05 PM ----------
Alright. Go here for the MK2 stock image.
http://forum.xda-developers.com/showthread.php?t=2578209
Make sure you have the correct USB Drivers and preferably use the USB cable that came with the S4.
If the no wipe doesn't work.. Try the full wipe..
I'm going out on a limb since you haven't replied back yet. But if you're on a Verizon S4 with SafeStrap then really you can't go wrong with using the MK2 file.
If you need anymore help let me know
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
For people that needs / wants to go back to so you can send in your tablet in for repair, or just for fun, I had made these stock PA1 flashable .zip's I have 2, one is ROOTED and one isn't ROOTED.
Non-ROOTED: https://drive.google.com/file/d/0B5EVF8f93NAlajVzRnVkWF9TcUk/view?usp=sharing
Stock recovery.img: https://drive.google.com/file/d/0B5EVF8f93NAlc3NIZ3o4c2tnUjQ/view?usp=sharing
ROOTED: https://drive.google.com/file/d/0B5EVF8f93NAleU1JcGFfaFltUUE/view?usp=sharing
Could you give a log and some details about your rom, please? Is it a beta or can be used as a daily driver?
Thanks
maxray said:
Could you give a log and some details about your rom, please? Is it a beta or can be used as a daily driver?
Thanks
Click to expand...
Click to collapse
Daily driver.
I downloaded the zip and tried to flash it. In TWRP it starts to extract files with the progress bar only a 1/4 of the way over and after about 10 seconds it reboots back into recovery as if it crashed. I figured it was a bad download so I downloaded it again and tried a second time and same thing. not sure if it a bad upload or what I am doing wrong. I am using rooted version. Thanks
JonSCSL said:
I downloaded the zip and tried to flash it. In TWRP it starts to extract files with the progress bar only a 1/4 of the way over and after about 10 seconds it reboots back into recovery as if it crashed. I figured it was a bad download so I downloaded it again and tried a second time and same thing. not sure if it a bad upload or what I am doing wrong. I am using rooted version. Thanks
Click to expand...
Click to collapse
Hmm, strange I downloaded it, and flashed it a couple of days ago.... And it booted for me. Make sure you are using the latest TWRP. I used this recovery to flash mine... https://drive.google.com/file/u/1/d/0B5EVF8f93NAlWUFWeHRjdXFXMkE/view?usp=drive_web
secretwolf98 said:
Hmm, strange I downloaded it, and flashed it a couple of days ago.... And it booted for me. Make sure you are using the latest TWRP. I used this recovery to flash mine... https://drive.google.com/file/u/1/d/0B5EVF8f93NAlWUFWeHRjdXFXMkE/view?usp=drive_web
Click to expand...
Click to collapse
It might not be the latest TWRP. It was installed like a year ago. I will check tonight when I get home. Thanks
Sent from my SM-N950U using Tapatalk
JonSCSL said:
It might not be the latest TWRP. It was installed like a year ago. I will check tonight when I get home. Thanks
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Ok, your welcome
I tried with the same TWRP like yours and I encounter the same problem like JonSCSL, maybe it is a broken download after all
maxray said:
I tried with the same TWRP like yours and I encounter the same problem like JonSCSL, maybe it is a broken download after all
Click to expand...
Click to collapse
I ended up using samsung smart switch for Windows and installed stock update then installed twrp then flashed supersu.zip.
Sent from my SM-N950U using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
JonSCSL said:
I ended up using samsung smart switch for Windows and installed stock update then installed twrp then flashed supersu.zip.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
No data loss at all.
Sent from my SM-N950U using Tapatalk
JonSCSL said:
I ended up using samsung smart switch for Windows and installed stock update then installed twrp then flashed supersu.zip.
Sent from my SM-N950U using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
No data loss at all.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
So you didn't manage to flash it either after all and you're just samsung stock
---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------
I am curious if this build is based on 4.4 or newer android version
maxray said:
So you didn't manage to flash it either after all and you're just samsung stock
---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------
I am curious if this build is based on 4.4 or newer android version
Click to expand...
Click to collapse
4.4 I do not notice any difference between the previous build.
Sent from my SM-N950U using Tapatalk
maxray said:
So you didn't manage to flash it either after all and you're just samsung stock
---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------
I am curious if this build is based on 4.4 or newer android version
Click to expand...
Click to collapse
It's stock.
This post is obsolete. All links are no longer available