Hi Guys.
I uninstalled some apps on my rooted I9300 and went to bed. When i woke up, the boot logo was stuck.
The only thing i can access is Download-mode (Volume-down + Home + Power).
I think the only way to get my phone up and running again, is through Odin (please correct me if I'm wrong)
What i have tried to resolve the issue:
- Tried downloading stock firmware from Sammobile.com and adding it in Odin v1.85, v3.04 and v3.07: Result: There is no PIT partition. v3.07 stopped at "SetupConnection.."
- Tried downloading rescue firmware here: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6. The package included Bootloader, PDA, PHONE and CSC files. Tried running them through Odin, first with "Re-Partition" unticked - Failed. Then i tried with "Re-partition" ticked, and got this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
- I tried downloading KIES, to check if my phone connected, but it doesn't.
I just need to access CWM recovery so i can install a ROM, but when I hold Volume Up + Power, it shows the boot logo after a while and it stays there..
Im fairly new to Android, but I hope you guys have some tips for me.
This thread looks like a similar problem
http://forum.xda-developers.com/showthread.php?t=1785481
maatsby said:
This thread looks like a similar problem
http://forum.xda-developers.com/showthread.php?t=1785481
Click to expand...
Click to collapse
I can't find a solution in this thead. The firmware i downloaded from Sammobile.com did not include a .pit file, just one large tar.md5 file.
When using this in Odin i get the "There is no PIT partition" error.
nubz2k said:
I can't find a solution in this thead. The firmware i downloaded from Sammobile.com did not include a .pit file, just one large tar.md5 file.
When using this in Odin i get the "There is no PIT partition" error.
Click to expand...
Click to collapse
What's inside the tar file? Can you extract it and put each of the separate bits in to their own boxes in odin?
---------- Post added at 10:44 PM ---------- Previous post was at 10:41 PM ----------
You said you're keen to just get in to recovery, can u flash a recovery in odin and then use adb commands to get there? adb reboot recovery
http://forum.xda-developers.com/showthread.php?t=1796062
maatsby said:
What's inside the tar file? Can you extract it and put each of the separate bits in to their own boxes in odin?
You said you're keen to just get in to recovery, can u flash a recovery in odin and then use adb commands to get there? adb reboot recovery
Click to expand...
Click to collapse
Tried flashing Recovery-clockwoork...-i9300.tar now, but it keeps saying that there is no PIT partition
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
As far as I know, there is no point to adb without a recovery to boot?
What's inside the tar file? Can you extract it and put each of the separate bits in to their own boxes in odin?
Click to expand...
Click to collapse
Just a bunch of folders. Nothing looks like something i can put in Odin's boxes.
JJEGAN:
Can't extract the PIT file with Heimdall
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
Click to expand...
Click to collapse
nubz2k said:
Just a bunch of folders. Nothing looks like something i can put in Odin's boxes.
JJEGAN:
Can't extract the PIT file with Heimdall
Click to expand...
Click to collapse
Probably supposed to flash the three parts dont know i steer clear of Pits .
jje
JJEgan said:
Probably supposed to flash the three parts dont know i steer clear of Pits .
jje
Click to expand...
Click to collapse
The rescue firmware i downloaded included 3 parts + PIT file, but when i try to flash just the 3 parts, without the PIT, it fails.
Giving up! I've read through countless forums, and no one has a solution as long as the "Re-Partition operation failed." error shows in Odin.
RMA'ing the phone tomorrow.:crying:
Try firmware initialzation within KIES. You will be prompted for the model and serial number and voilá!!!! New
Flashing going under it's way!!!
Sent from my GT-I9300 using xda premium
worf_1977 said:
Try firmware initialzation within KIES. You will be prompted for the model and serial number and voilá!!!! New
Flashing going under it's way!!!
Click to expand...
Click to collapse
My device isn't recognized by KIES while in downloading mode. Is it supposed to? I've tried downloading the drivers, different cables and pc's.
Got any tips on how to get KIES to detect my phone?
Try re installing USB Drivers for samsung phones...
Sent from my GT-I9300 using xda premium
worf_1977 said:
Try re installing USB Drivers for samsung phones...
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tried it. The drivers are installed. Odin and Heimdall detects it, but KIES doesn't.
Then try to follow firmware initialization steps, and then, and only then, connect the phone... It will look for your terminal in download mode and update it.
Sent from my GT-I9300 using xda premium
worf_1977 said:
Then try to follow firmware initialization steps, and then, and only then, connect the phone... It will look for your terminal in download mode and update it.
Click to expand...
Click to collapse
Tried it. KIES downloads the firmware and fails at apx 69% telling me that "firmware initialization failed".
send it in
Already packed and ready for shipment.
Update:
The service department stated that they had to replace the mainboard on my phone.
I don't know if they noticed that the device was rooted and had a custom ROM, but it was covered by warranty and they are sending it back with no charge
How lucky you are then!!! Congrats and enjoy the new phone, whenever arrives
Sent from my GT-I9300 using xda premium
Related
Odin fails with a ROM offical or custom... A Kernal flashes with a pass. Is this bricked? I can enter download mode ok, but not upload to recovery?
The Odin log:
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice would be greatly recieved!
Thanks
Interesting... When flashing the ROM, do you have a .PIT file + ticked Re-partition in ODIN? If not, try that.
Here's the download for stock firmware, straight from SamFirmware (XXKI3, Open Europe, 2.3.5) : http://hotfile.com/dl/130600047/b70801e/I9100XXKI3.rar.html
Phistachio said:
Interesting... When flashing the ROM, do you have a .PIT file + ticked Re-partition in ODIN? If not, try that.
Click to expand...
Click to collapse
I have found a PIT file ~ u1_02_20110310_emmc_EXT4.pit I don't know where it came from though? it exists in a folder on my desktop where Odin is placed. Do you think that will be safe?
I've never flashed with Re-partition ticked in odin. I've read that is dangerous. Is this defo safe to do?
Thanks
mwatson said:
I have found a PIT file ~ u1_02_20110310_emmc_EXT4.pit I don't know where it came from though? it exists in a folder on my desktop where Odin is placed. Do you think that will be safe?
I've never flashed with Re-partition ticked in odin. I've read that is dangerous. Is this defo safe to do?
Thanks
Click to expand...
Click to collapse
Yes, it is dangerous when you don't know what you're doing. Be VERY careful when around .PITs.
But I have soft bricked my GSII 3 times, and I have flashed KH3 recovery package thrice, WITH the .PIT. The .PIT is just to be as fresh and stock as possible.
Download the package I gave you. But also, what are you trying to flash?
Just to be safe, don't use the .PIT that you "found". The name's the same as in the pack I gave you, but better than than sorry
Phistachio said:
Yes, it is dangerous when you don't know what you're doing. Be VERY careful when around .PITs.
But I have soft bricked my GSII 3 times, and I have flashed KH3 recovery package thrice, WITH the .PIT. The .PIT is just to be as fresh and stock as possible.
Download the package I gave you. But also, what are you trying to flash?
Click to expand...
Click to collapse
I was trying to flash stock
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1.TAR in PDA
I'm just downloading the file you posted. Will this package include the PIT?
Thanks for your help!
mwatson said:
I was trying to flash stock
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1.TAR in PDA
I'm just downloading the file you posted. Will this package include the PIT?
Thanks for your help!
Click to expand...
Click to collapse
Anytime
Yes, it will include the .PIT, aswel as MODEM, CODE and CSC (which should be multi).
Also, just to make sure, uninstall KIES. It may interfere on the flashing process + it's useless
Phistachio said:
Anytime
Yes, it will include the .PIT, aswel as MODEM, CODE and CSC (which should be multi).
Click to expand...
Click to collapse
9 mins to go till the file has downloaded...
So just to be sure i need to flash the PIT, Modem, Code and CSC all together with re-partition ticked?
mwatson said:
9 mins to go till the file has downloaded...
So just to be sure i need to flash the PIT, Modem, Code and CSC all together with re-partition ticked?
Click to expand...
Click to collapse
Yes Do you know where to place each one of them? Let's hope it doesn't end up hard bricked
But before you do ANYTHING, can you go into recovery mode (vol. up+home+power)? If so try to wipe user data and cache.
If that doesn't work, try to normally turn on, and if it bootloops, remove the battery.
PS : I am not liable to any damage that may occur Although I've tested myself and all went OK (With KH3, but it's mainly the same thing )
yeah i know where to put them. I can't enter recovery though. It just loops on boot screen. Will this be a problem if i can't wipe data?
Downloaded file asking for a password?
mwatson said:
yeah i know where to put them. I can't enter recovery though. It just loops on boot screen. Will this be a problem if i can't wipe data?
Click to expand...
Click to collapse
Nope, because the .PIT + Re partition will do the job
ok.. neraly there.. Downloaded file asking for a password?
mwatson said:
ok.. neraly there.. Downloaded file asking for a password?
Click to expand...
Click to collapse
I believe it is samfirmware.com
Good luck!
Bugger failed again!
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> cache.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I guess this is just good for spare now... or a paperweight!
mwatson said:
Bugger failed again!
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> cache.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I guess this is just good for spare now... or a paperweight!
Click to expand...
Click to collapse
Now this is weird... I have never seen a flash failed when using a .PIT...
I'm sorry to say this, but I think your GSII is hard bricked... Try to flash another 2 times, the same thing.
What it seems is that the NAND got corrupted somehow... And isn't letting ODIN flash properly...
Just tried another couple of times and still no good.
Obrigado pela vossa ajuda. Feliz Ano Novo!
mwatson said:
Just tried another couple of times and still no good.
Obrigado pela vossa ajuda. Feliz Ano Novo!
Click to expand...
Click to collapse
The last thing that comes to mind is... To flash a stock kernel (preferably KI3 Stock Kernel) from Intratech's thread. If successful, flash the the recovery package again. If unsuccessful, as a last resort, flash the old bootloader provided in his thread aswell (follow his instructions!), and if successful, flash the KI3 package I gave you again. That may screw up the GSII's mind and make it work
As it is unfortunately hard bricked, I'm giving out all options that come to my mind
De nada ! I wish you a joyful new year aswell
In a less confusing manner :
1. Flash KI3 Stock Kernel from Intratech'a thread.
2. Flash Recovery package
3. If recovery package is not flashed, re flash the stock kernel
4. Flash old bootloader provided in the same thread
5. If it boots, then yay. If not :
6. Re flash the recovery package.
With that "guide", I want to exploit the fact that you can root a kernel, so if you root a stock kernel, you get lucky...
Also, are you sure you put the stuff in the right place? .PIT -> PIT, Code -> PDA, Modem -> Phone, CSC -> CSC and ticked Re-partition, Auto Reset and F.Timer reset (irst 3)
Yep.. thats what i did.. Screen shot for you in case you can spot anything? Defo kies not running as you can see from the screen shot.
The phone still goes into download mode though?
Use a different USB port on your PC. Try to use one of the Ports on the rear of your case and not the ones on the front or top of the case.
Sleepycat3 said:
Use a different USB port on your PC. Try to use one of the Ports on the rear of your case and not the ones on the front or top of the case.
Click to expand...
Click to collapse
Tried different ports. Still no luck.. During the flash process is tries to boot the goes to fail.
It not like i can send this back as it has a count of 7 custom downloads.
thanks
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
so you tried to flash a pit file?
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
sleepingsword said:
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
Click to expand...
Click to collapse
I just manged to help others over this soft brick problem, by flashing one of Darkys roms !!
Just find your country/region dl it and flash following his instructions
http://www.darkyrom.com/index.php?forum/#rom-darkyrom-iii-i9300.122
---------- Post added at 09:11 AM ---------- Previous post was at 09:07 AM ----------
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Sammy rom wont solve the problem - Darkyrom will :laugh:
Glebun said:
so you tried to flash a pit file?
Click to expand...
Click to collapse
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
sleepingsword said:
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
Click to expand...
Click to collapse
Are you blind ??
Stock wont do, Darky will!
Get CWM again do this>
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Now you successfully installed CWM + Super User + CWM Manager.
spoonymoon said:
Are you blind ??
Stock wont do, Darky will!
Click to expand...
Click to collapse
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
sleepingsword said:
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
Click to expand...
Click to collapse
Look one post above
spoonymoon said:
Look one post above
Click to expand...
Click to collapse
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
sleepingsword said:
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
Click to expand...
Click to collapse
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whitout reparation) thats all
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
spoonymoon said:
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whiteout reparation) thats all
Link>http://speedy.sh/kcqvD/
Click to expand...
Click to collapse
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
sleepingsword said:
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
spoonymoon said:
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
Click to expand...
Click to collapse
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
EDIT:
tried this PIT file: GT-I9300_mx_20120329
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sleepingsword said:
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
Click to expand...
Click to collapse
Try Odin v.3.07
dont work
Not sure but think , its possible a corrupted emmc !
But flashing a wrong pit file could make things even worse - lets investigate a bit more ?
Try latest odin 3.07
Btw: its a long shot but try flashing whitout external sd - remove it first
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Damm sorry to hear br0
And you're welcome
TRY THIS COULD WORK
http://www.androidauthority.com/galaxy-s3-gt-i9300-clockworkmod-recovery-6-0-1-0-install-103347/
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
painterceessie said:
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
Click to expand...
Click to collapse
with what excuse did they tell you no warrenty?
even if you flashed it they cant say no warrenty, a ok phone dosent burn emmc because of a flash, actually in eu theres a eu statement proven at court that says they cant say so, ill find the page for you, print that and throw that in their faces!
Searching is not really painful....have you tried it?
Follow the screenshots and use the Odin version included.
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
KizzleKat said:
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
Click to expand...
Click to collapse
Get the official firmware needed on Sammobile.com, you need an account on there. Don't worry it's free. Flash it as PDA on Odin. Make sure your phone is in download mode (volume up+volume down+power). If it boots, the boot animation might start looping. From theres you can access recovery (volume up+power+home). In recovery you wipe data and wipe cache and select reboot. It should work.
Sent from my GT-I8190N using Tapatalk
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Galaxy_Ace_Love said:
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Click to expand...
Click to collapse
Odin 3.07 supports one file package
Humm...
iamareebjamal said:
Odin 3.07 supports one file package
Click to expand...
Click to collapse
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
KizzleKat said:
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
Click to expand...
Click to collapse
Format the data
Put the pit file and tick Repartition. And then flash with Odin.
And you have to use Cooperve pit, not Totoro, it's for SGY
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
KizzleKat said:
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
Click to expand...
Click to collapse
Follow these Guidehttp://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
John90uk said:
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
haiderijaz said:
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
Click to expand...
Click to collapse
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
JJEgan said:
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
The problem started when i plugged my phone on charge, when i unplugged it the phone turned off and continued to restart after samsung logo screen. I then tried kies to upgrade and initiliase but when that reached 4% it would say an error occured. This happens constantly. I then closed kies and tried flashing a Stock rom with ODIN but it keeps saying FAIL in red.
Also afrer kies recovery it now says firmware upgrade encountered an error.
John90uk said:
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
Click to expand...
Click to collapse
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
haiderijaz said:
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
Click to expand...
Click to collapse
I am not using both softwares at the same time. Its a GT-I9300.
John90uk said:
I am not using both softwares at the same time. Its a GT-I9300.
Click to expand...
Click to collapse
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
haiderijaz said:
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
Click to expand...
Click to collapse
I can only get into download mode. When i try entering recovery mode i get a screen which says firmware upgrade encountered an error an issue. Where do i go from here?
Product code in download mode if blank its SDS .
JJEgan said:
Product code in download mode if blank its SDS .
Click to expand...
Click to collapse
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
John90uk said:
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
Click to expand...
Click to collapse
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
haiderijaz said:
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
Click to expand...
Click to collapse
It was from the UK. And i have tried to flash a T-mobile Uk firmware as it was on t-mobile. Thanks guys
Recovery mode and rooting are irrelevant to your issue. Try flashing the rescue firmware from the general forum, if that fails then you'll probably need a new motherboard.
Sent from my GT-I9300 using Tapatalk
First of all sorry for bad english
I cannot flash anything because of this error and also when i press the power button it says: ''Firmware upgrade encountered an issue.Please select recovery mode in kies and try again'' i think pit partition is also problem. I was using custom ROM and i cannot open recovery mode neither help me guys it is the error log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
SOLUTION:
I solve the problem i just simply renew the phone's root and then flashed a firmware now there is no problem and thanks for the reply
If you have "re-partition" ticked in odin, untick it.
Are you absolutely sure that the firmware you're flashing is correct for that variant?. Have you tried recovery via kies?.
If yes to all then you might have to find a pit file and flash it because it is trying to re-partition the nand, could be corrupt.
shivadow said:
If you have "re-partition" ticked in odin, untick it.
Are you absolutely sure that the firmware you're flashing is correct for that variant?. Have you tried recovery via kies?.
If yes to all then you might have to find a pit file and flash it because it is trying to re-partition the nand, could be corrupt.
Click to expand...
Click to collapse
Yes i tried to untick it but then it couldnt find pit file.
I'm certain that i downloaded the right firmware. And i tried with 3 other firmware as well.
I tried kies but i couldnt do it because it couldnt connect the phone.
And lastly i tried 4 other pit files but result is same where can i find the right pit file i think it is the problem. By the way last night i could flashed twrp recovery but i couldnt open it. When i tried to it open twrp it opened download mode. And it is the important part: i could not FLASHED AGAIN just happened once odin always keep stuck at "set partition" with "GET MAPPING FOR PIT..." step.
Try a pit file WITH the firmware in odin and see how far that gets..
Read post #1 here: https://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
shivadow said:
Try a pit file WITH the firmware in odin and see how far that gets..
Read post #1 here: https://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Click to expand...
Click to collapse
Thank you but i solved it.
Guillotine35 said:
SOLUTION:
I solve the problem i just simply renew the phone's root and then flashed a firmware now there is no problem and thanks for the reply
Click to expand...
Click to collapse
Hai, can you tell me how to renew phone root?
iki_sure said:
Hai, can you tell me how to renew phone root?
Click to expand...
Click to collapse
You just have to root phone here it's explanation:
https://forum.xda-developers.com/showthread.php?t=2499904
Guillotine35 said:
Thank you but i solved it.
Click to expand...
Click to collapse
How did you solve it?
aki001 said:
How did you solve it?
Click to expand...
Click to collapse
hi Brother i am getting same issue can you tell me how you fix this issue partitino error
masu222 said:
hi Brother i am getting same issue can you tell me how you fix this issue partitino error
Click to expand...
Click to collapse
same error - Tab A 2016 - SM-T580.
I would be grateful for any help here .. i unticked & ticked the re-partition but same result
samsung sm-T580 pit partition error in odin
I try to update my sm-t580 to android 9.0 by using firmwere . I was did with odin flash. After that my tab is not start normaly. I plug my charger and my tab show boot screen and say invailed kernel length. There is no recovery mode only download mode is ok. But when i try to flash any firm were like 6.0 ,7.0 or 8.0 odin failed with massage there is no pit partition.:crying: Help me out plz .
bornoamit said:
I try to update my sm-t580 to android 9.0 by using firmwere . I was did with odin flash. After that my tab is not start normaly. I plug my charger and my tab show boot screen and say invailed kernel length. There is no recovery mode only download mode is ok. But when i try to flash any firm were like 6.0 ,7.0 or 8.0 odin failed with massage there is no pit partition.:crying: Help me out plz .
Click to expand...
Click to collapse
wrong thread, search in the section for your device
I have this problem too!
guillotine35 said:
first of all sorry for bad english
i cannot flash anything because of this error and also when i press the power button it says: ''firmware upgrade encountered an issue.please select recovery mode in kies and try again'' i think pit partition is also problem. I was using custom rom and i cannot open recovery mode neither help me guys it is the error log:
<id:0/004> added!!
<osm> enter cs for md5..
<osm> check md5.. Do not unplug the cable..
<osm> please wait..
<osm> i9300xxellb_i9300ojvell3_i9300xxella_home.tar.md5 is valid.
<osm> checking md5 finished sucessfully..
<osm> leave cs..
<id:0/004> odin v.3 engine (id:4)..
<id:0/004> file analysis..
<id:0/004> setupconnection..
<id:0/004> initialzation..
<id:0/004> set pit file..
<id:0/004> do not turn off target!!
<id:0/004>
<id:0/004> re-partition operation failed.
<id:0/004> added!!
<osm> all threads completed. (succeed 0 / failed 1)
<id:0/004> removed!!
<id:0/004> added!!
solution:
i solve the problem i just simply renew the phone's root and then flashed a firmware now there is no problem and thanks for the reply
Click to expand...
Click to collapse
hey i have this problem i used so many firmwares but its says every time re-partition faild!
And sometimes says pit faild! There is no pit partition... I want to know how did u do renew root?
My phone just stucked in downloading do not turn off target!
I just had that ODIN Re-Partition Error, when this happens you are flashing with the wrong country file for your device. You need to reboot into your recovery mode & check those 13 Letter & Numbers above in Recovery Mode eg:
1: The Model Of The Device = Samsung SM-A217M
2: A217MUBU5BUA3 is the Baseband Version number & letters found above in
Recovery mode or in Settings = About = BaseBand Version.
3: Type that same number A217MUBU5BUA3 in Google Search & you will get
the correct country from the result to go to either links to download the
correct country firmware, the one with samfw is the better link to use.
4: Download & apply each file as usual & START. You will see it applying the
firmware with no Re-Partition Errors. It reboots & all is good now. Let me
know if it worked for you, it did for me.
http://www.sammobile.com or http://samfw.com
Nakaiman said:
I just had that ODIN Re-Partition Error, when this happens you are flashing with the wrong country file for your device. You need to reboot into your recovery mode & check those 13 Letter & Numbers above in Recovery Mode eg:
1: The Model Of The Device = Samsung SM-A217M
2: A217MUBU5BUA3 is the Baseband Version number & letters found above in
Recovery mode or in Settings = About = BaseBand Version.
3: Type that same number A217MUBU5BUA3 in Google Search & you will get
the correct country from the result to go to either links to download the
correct country firmware, the one with samfw is the better link to use.
4: Download & apply each file as usual & START. You will see it applying the
firmware with no Re-Partition Errors. It reboots & all is good now. Let me
know if it worked for you, it did for me.
http://www.sammobile.com or http://samfw.com
Click to expand...
Click to collapse
This solution worked for me. I had the re-partition error with four different stock firmwares. Finally I used device info app to check my baseband and bootloader number. I then used those numbers to search for my exact firmware. Flashing this new firmware worked for the very first attempt. A big thanks.
Guillotine35 said:
Thank you but i solved it.
Click to expand...
Click to collapse
how did you solved can you write solution here please it would help others
awais786327 said:
how did you solved can you write solution here please it would help others
Click to expand...
Click to collapse
I updated the thread long time ago man , you can read my solution under this topic's first message.