i am from india i bought samsung galaxy s2 GT-I9100 from Jeddah (Saudi Arabia).my phones details is attached bellow.i want to update my phone to jellybean.so i opened settings-about-software update found an update and downloaded the package of 407mb.Afted downloading it showed pop up to install of jellybean and seen please wait message and phone rebooted.after rebooting android simbol appeared.then shown firmware update failed try to connect through kies vs pc.what to i tried again its started downloaded 407mb again.please help me.i tried through kies latest version,its shows GT-I9100 deosn"t support initialising.please help me?which country i prefer india or Saudi Arabia.how to update after downloading firmware from sammobile.Is it end my warranty.PLEASE ANY BODY REPLY ME?
Mate go to sammobile.com download right ROM and flash by odin
Sent from my GT-I9100 using xda premium
---------- Post added at 03:02 PM ---------- Previous post was at 03:02 PM ----------
If u look here u find explanation how to use odin
Sent from my GT-I9100 using xda premium
Odin flashing takes hardly 5mins...very simple...
Sent from my GT-I9100 using my fingers...
fahimclm said:
i am from india i bought samsung galaxy s2 GT-I9100 from Jeddah (Saudi Arabia).my phones details is attached bellow.i want to update my phone to jellybean.so i opened settings-about-software update found an update and downloaded the package of 407mb.Afted downloading it showed pop up to install of jellybean and seen please wait message and phone rebooted.after rebooting android simbol appeared.then shown firmware update failed try to connect through kies vs pc.what to i tried again its started downloaded 407mb again.please help me.i tried through kies latest version,its shows GT-I9100 deosn"t support initialising.please help me?which country i prefer india or Saudi Arabia.how to update after downloading firmware from sammobile.Is it end my warranty.PLEASE ANY BODY REPLY ME?
Click to expand...
Click to collapse
Relax mate. I too had the same problem!
Sammobile.com contains all official firmwares released by Samsung in different countries. Flashing any of them using Odin will not void your warranty.
As for which country to choose, it doesn't really matter! U have been using Saudi version in India without any probs right?
Go to sammobile.com, search for 4.1.2 firmwares for GT I9100, and download any version (preferably European version).
Then simply flash it using Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
Related
Hello,
My 9100 is using 4.0.4, and I would like to upgrade it to 4.1.2 (I9100ZCLSH_I9100OZHLSH_CHN, it's a chinese version because I would like to have a chinese system). BUT FAILED!
I have already installed CWM with super user, and whenever I reboot the phone, there is a yellow triangle, so I BELIEVE it's been rooted successfully.
When I put the phone in download mode, plug it in Odin, the sign shows yellow with COM4 (or 5 or 6), so I believe there is no connection or driver problem.
However, when I load the PDA file I9100ZCLSH_I9100OZHLSH_CHN and start, Odin could not complete the flash. it shows FAIL....
Please see the picture. Could anyone help with this issue !!! Thank you so much !!
Details of my system:
4.0.4
baseband version I9100XXLQ5
Kernel: 3.0.15-I9100XXLPQ-CL223505
Build number IMM76D.XXLQ5
iambigman said:
Hello,
My 9100 is using 4.0.4, and I would like to upgrade it to 4.1.2 (I9100ZCLSH_I9100OZHLSH_CHN, it's a chinese version because I would like to have a chinese system). BUT FAILED!
I have already installed CWM with super user, and whenever I reboot the phone, there is a yellow triangle, so I BELIEVE it's been rooted successfully.
When I put the phone in download mode, plug it in Odin, the sign shows yellow with COM4 (or 5 or 6), so I believe there is no connection or driver problem.
However, when I load the PDA file I9100ZCLSH_I9100OZHLSH_CHN and start, Odin could not complete the flash. it shows FAIL....
Please see the picture. Could anyone help with this issue !!! Thank you so much !!
Details of my system:
4.0.4
baseband version I9100XXLQ5
Kernel: 3.0.15-I9100XXLPQ-CL223505
Build number IMM76D.XXLQ5
Click to expand...
Click to collapse
Anyone can help, please ??!!
Try another odin version.
You can also flash siyah v5 and flash via mobile odin.
Sent from the little guy
Okay buddy u can also root from Cwm.. Use the other way. Search the threads for more information.. Use wanam..
Sent from my GT-I9100 using xda premium
mapps563 said:
Okay buddy u can also root from Cwm.. Use the other way. Search the threads for more information.. Use wanam..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi, Thank you very much.
I think I have already rooted, I flashed with CF-Root-SGS2-XX_OXA_LQ5-v5.6-CWM5, and I could get super user permission.
But the only problem is that I cannot flash a new stock firmwire....
be carefull with 4.0.4 kernel....
Sent from the little guy
gastonw said:
be carefull with 4.0.4 kernel....
Sent from the little guy
Click to expand...
Click to collapse
Hi thanks gastonw.
Yes, I have heard of the danger of 4.0.4 and I wonder if my system has been "soft bricked"... Luckily, it's still working on 4.0.4, though failed in flashing new stock firmwire. I just don't know the reason...
Download new Odin 3.07 version.
Are yu flashing right ROM version.
Maybe corrupted files.
Try redownload it. If you downloaded from SamFirmware maybe its bad download.
Something is wrong with SAM zip files. I downloaded today from SAM and ger ZIP damaged. Downloaded from annother link
Redownload the ROM and flash again with ODIN 3.07
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 07:32 PM ---------- Previous post was at 07:24 PM ----------
One question?
Why chinese JB. Are you chinese or? Dont understand
bihslk said:
Download new Odin 3.07 version.
Are yu flashing right ROM version.
Maybe corrupted files.
Try redownload it. If you downloaded from SamFirmware maybe its bad download.
Something is wrong with SAM zip files. I downloaded today from SAM and ger ZIP damaged. Downloaded from annother link
Redownload the ROM and flash again with ODIN 3.07
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 07:32 PM ---------- Previous post was at 07:24 PM ----------
One question?
Why chinese JB. Are you chinese or? Dont understand
Click to expand...
Click to collapse
Thanks bihslk.
Yes, I'm Chinese. I was using UK version and fine, but now I switched to S3 and I'm giving S2 to my mom. Chinese version will be easier for her
I tried a new version of Odin, the same failure ....
Do you think the firmwire that I downloaded has a problem ?? yes I downloaded it from samfirmwire, and actually I tired 3 different versions, including older ginger bread , none of them worked ... this problem is driving my a little crazy .
There is a way to solve "unflashable" S2, do you recommend I try it?
http://forum.xda-developers.com/showthread.php?t=1457458
iambigman said:
Thanks bihslk.
Yes, I'm Chinese. I was using UK version and fine, but now I switched to S3 and I'm giving S2 to my mom. Chinese version will be easier for her
I tried a new version of Odin, the same failure ....
Do you think the firmwire that I downloaded has a problem ?? yes I downloaded it from samfirmwire, and actually I tired 3 different versions, including older ginger bread , none of them worked ... this problem is driving my a little crazy .
There is a way to solve "unflashable" S2, do you recommend I try it?
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I think you have corrupted files.
Try to download the same ROM again but from annother LINK. NOT Hotfile
If it doesnt work neither. Then try to install ICS Chinese for you REGION and try update via OTA or KIES
It it doesnt work 2 then try the link you posted ABOVE
One more thing. I saw you have COM6 or something. It sounds like USB HUB ports.
Try to connect phone to the original PC USB in front of the PC or MotherBoard USB not in the HUBS.
Make ONE PC reboot 2
---------- Post added at 08:02 PM ---------- Previous post was at 07:48 PM ----------
Find your Firmware here
http://samsung-updates.com/device/?id=GT-I9100
Here it is
http://hotfile.com/dl/193280116/4d4...m-GT-I9100-CHZ-I9100ZCLSH-1359021326.zip.html
Have you tried mobile odin?
You can flash LSJ and after that any chinese stock ROM.
Sent from the little guy
Problem solved !!!
gastonw said:
Have you tried mobile odin?
You can flash LSJ and after that any chinese stock ROM.
Sent from the little guy
Click to expand...
Click to collapse
Hello guys,
Thank you soooo much for all your advises ! Without your suggestions, I would not be able to solve this problem.
In the end, I think its the firmware V.S. phone format problem.
I9100OZHLSH_CHN, is the official firmware to chinese S2 users. Mine is actually Canadian i9100 M, but I flashed it with UK version so it shows I9100. I read a thread in chinese, saying that Bootloader is needed, which use .pit to format the partition from eur to chn. Thus, I guess no matter how many times I try, without Bootloader, the flash would be failed. (I did not really try the bootloader, seems to be risky, if anyone in the future needs it, pls follow this link in chinese though.... http://bbs.anzhi.com/forum.php?mod=viewthread&tid=6347421&reltid=6324097&pre_pos=2&ext= ).
I follow this instruction to recover my system to 4.0.3, which I have better control ..
http://forum.xda-developers.com/show....php?t=1457458
Then I found this "Official Android 4.1.2 ZSLSH Jelly Bean Firmware", which they say it's released in China but can also be install in EU international phones, I succeeded ! This firmware has both english and Chinese language packages. :fingers-crossed:
http://www.ibtimes.co.uk/articles/4...icial-android412-zslsh-jellybean-firmware.htm
So overall, ZSLSH works on my phone, but ZHLSH will never I guess.
Thank you all again, and hope this may help others who may encounter this issue in the future !!!!!
I9100 & i9100M has got the same hardware so it should work.
Sent from the little guy
Hi im from the UK and basically i couldnt wait for JB so i upgraded to the official test firmware using odin from here
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
What i want to know is when the official JB is released will i be able to update using Kies. Currently when i plug my phone into kies it says the current firmware version isnt supported for update.
How can i revert to make a ota/ kies update possible?
adam7862 said:
What i want to know is when the official JB is released will i be able to update using Kies. Currently when i plug my phone into kies it says the current firmware version isnt supported for update.
Click to expand...
Click to collapse
Since you are already on JB 4.1.2, you will not be able to update to the official version when it gets released.
Sent from my SGS II
---------- Post added at 03:12 AM ---------- Previous post was at 03:09 AM ----------
adam7862 said:
How can i revert to make a ota/ kies update possible?
Click to expand...
Click to collapse
Just like you flashed the test JB firmware, you can download the stock ICS 4.0.3/4.0.4 firmware for your region, and flash it using Odin. That way, your phone can get the update via Kies.
Or better yet, when the update is released, you can download that firmware manually and flash using Odin!
Sent from my SGS II
immortalneo said:
Since you are already on JB 4.1.2, you will not be able to update to the official version when it gets released.
Sent from my SGS II
---------- Post added at 03:12 AM ---------- Previous post was at 03:09 AM ----------
Just like you flashed the test JB firmware, you can download the stock ICS 4.0.3/4.0.4 firmware for your region, and flash it using Odin. That way, your phone can get the update via Kies.
Or better yet, when the update is released, you can download that firmware manually and flash using Odin!
Sent from my SGS II
Click to expand...
Click to collapse
Hi thanks for your reply. Like i said im from the UK and my phone is unlocked. But im not sure if it was factory unlocked or if it was unlocked from a specific network. Which region firmware should i use?
adam7862 said:
Hi thanks for your reply. Like i said im from the UK and my phone is unlocked. But im not sure if it was factory unlocked or if it was unlocked from a specific network. Which region firmware should i use?
Click to expand...
Click to collapse
Any region's should work fine. But check for the European version. This thread will help you choose:
http://forum.xda-developers.com/showthread.php?t=1075278
You can dowload official firmwares from sammobile.com.
Sent from my SGS II
immortalneo said:
Any region's should work fine. But check for the European version. This thread will help you choose:
http://forum.xda-developers.com/showthread.php?t=1075278
You can dowload official firmwares from sammobile.com.
Sent from my SGS II
Click to expand...
Click to collapse
okay thanks last question, if i wait for the official jb and flash using odin, after that will i be able to use kies and ota for future updates?
adam7862 said:
okay thanks last question, if i wait for the official jb and flash using odin, after that will i be able to use kies and ota for future updates?
Click to expand...
Click to collapse
Yes, you can..
Sent from my SGS II
I install I9100ZSLSH_I9100OZSLSH_TGY to my sgs2
it not show the csc .... it show csc is unknown
and I cant connect my phone to kies
and for csc *#272*imei# is also not work
and I was buy my phone from china and after that I changed it to hongkong rom and 2 days before I get update by ota and I update it
but after it update I again install rom by odin and I download rom from sammobile rom name is I9100ZSLSH_I9100OZSLSH_TGY
and now my phone cant connect to kies and not show the csc
so plese help me to slw it
I want my phone work all like genuine
and I want to use the official rom for get further updates from Samsung
so pleaseeeeeeeeeeeeee helep me please ..........................
thaks a lot ...................................
That is...the longest sentence I've ever read.....
Flash Chiba unbranded and that's that.
Sent from the little guy
Lol That's like a world record or something!
gastonw said:
That is...the longest sentence I've ever read.....
Click to expand...
Click to collapse
+1 :thumbup:
"To err is human, to forgive is divine"
Sent from my SGS II
i have flashed official ics 4.0.4 in samsung galaxy s ii . since i m unable to download the firmware via samobile. i have to update it using kies now. so is there any way to show up my samsung galaxy s ii samsung kies . it shows up in kies but the update shows firmware not recognised like it shows up XXX in firmware name.plz any one knows how to solve thiis problem
suhag said:
i have flashed official ics 4.0.4 in samsung galaxy s ii . since i m unable to download the firmware via samobile. i have to update it using kies now. so is there any way to show up my samsung galaxy s ii samsung kies . it shows up in kies but the update shows firmware not recognised like it shows up XXX in firmware name.plz any one knows how to solve thiis problem
Click to expand...
Click to collapse
If you have flashed a firmware of your country than only kies can show u official updates
Rom : MIUI V5
Kernel : HIROX V5 INTENSIVE
Modem : NELP2
click THANKS if you think my post was HELPFUL
Shahan_mik3 said:
If you have flashed a firmware of your country than only kies can show u official updates
Rom : MIUI V5
Kernel : HIROX V5 INTENSIVE
Modem : NELP2
click THANKS if you think my post was HELPFUL
Click to expand...
Click to collapse
i know buddy but it shows ur firmware is not upgradible
And is there any way to solve it
y not download from torrent ???
suhag said:
And is there any way to solve it
Click to expand...
Click to collapse
once you flashed a firmware via odin, kies will not be able to update your device until you go back to the firmware that was last
recognized by kies. To achieve this there are several steps necessary.
So the onliest thing you can do is to go back or find another way to download your desired firmware.
You can also get most firmwares from here. .....
http://samsung-updates.com/
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
suhag said:
i have flashed official ics 4.0.4 in samsung galaxy s ii . since i m unable to download the firmware via samobile. i have to update it using kies now. so is there any way to show up my samsung galaxy s ii samsung kies . it shows up in kies but the update shows firmware not recognised like it shows up XXX in firmware name.plz any one knows how to solve thiis problem
Click to expand...
Click to collapse
Try downloading your desired firmware from http://www.sammobile.com and flash it via odin. Hope i helpt
Christonio said:
Try downloading your desired firmware from http://www.sammobile.com and flash it via odin. Hope i helpt
Click to expand...
Click to collapse
Seriously read the post again :banghead::what::thumbdown:
Rom : MIUI V5
Kernel : HIROX V5 INTENSIVE
Modem : NELP2
click THANKS if you think my post was HELPFUL
Grettings everyone,
As the title says I want to update my Galaxy S2 i9100 via ODIN which is currently running on Gingerbread 2.3.5 to Jelly bean 4.1.2 officially.
As I'm a kind of person who dont want to mess up my device with rooting or mostly dont care about rooting.
I'm on complete stock Gingerbead 2.3.5 with no root apply.
The problem is that I cant update my GT-I9100 via KIES or via OTA (Over The Air).
Here are the basic which info. which I can provide,
"Model No. (GT-I9100)
Android version (2.3.5)
Baseband version (I9100XXKI4)
Kernel Version (2.6.35.7-I9100JPKj2-CL655700 root @dell143 #2
Build No. GINGERBREAD.JPKJ2
and here is the error which KIES shows.
"Your device's current firmware version is not supported to update firmware via Kies.
* Current firmware version DA:KJ2/ PHONE:KI4/ CSC:KID(XXX)"
Sorry for my bad English and also if I am posting this on a wrong section.
And I also can anyone also tell me the procedure whether to check my phone is locked or not to just make sure everything go perfect during the update process.
Thanks In Advance !
This has already been covered many times mate! Please use search before posting.
Simply download the appropriate firmware for ur region/carrier (if any) from sammobile.com. Extract it and flash it using Odin. Then do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
This has already been covered many times mate! Please use search before posting.
Simply download the appropriate firmware for ur region/carrier (if any) from sammobile.com. Extract it and flash it using Odin. Then do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks mate.
Just 1 more thing is it safe to download any of the jelly bean 4.1.2 of any country? For example India, Pakistan and update it via odin?
Yes it's safe (altough you should back EFS folder up first).
Sent from the little guy
I think, you could find some answer here ---> http://forum.xda-developers.com/showthread.php?t=2156592
midskool said:
Grettings everyone,
As the title says I want to update my Galaxy S2 i9100 via ODIN which is currently running on Gingerbread 2.3.5 to Jelly bean 4.1.2 officially.
As I'm a kind of person who dont want to mess up my device with rooting or mostly dont care about rooting.
I'm on complete stock Gingerbead 2.3.5 with no root apply.
The problem is that I cant update my GT-I9100 via KIES or via OTA (Over The Air).
Here are the basic which info. which I can provide,
"Model No. (GT-I9100)
Android version (2.3.5)
Baseband version (I9100XXKI4)
Kernel Version (2.6.35.7-I9100JPKj2-CL655700 root @dell143 #2
Build No. GINGERBREAD.JPKJ2
and here is the error which KIES shows.
"Your device's current firmware version is not supported to update firmware via Kies.
* Current firmware version DA:KJ2/ PHONE:KI4/ CSC:KID(XXX)"
Sorry for my bad English and also if I am posting this on a wrong section.
And I also can anyone also tell me the procedure whether to check my phone is locked or not to just make sure everything go perfect during the update process.
Thanks In Advance !
Click to expand...
Click to collapse
Have you managed to resolve the problem if so how?
You download from sammobile flash with Odin factory reset in recovery and your done. If you read this thread you would no how to upgrade. On this thread is about efs Bk up too.
MistRee said:
Have you managed to resolve the problem if so how?
Click to expand...
Click to collapse
Yes I have finally updated my i9100 To official 4.1.2... I downloaded the firmware from sammobile and flash it with odin.
1 thing to keep in mind, my lock key was'nt working after the update and the device just not seems to get lock after the update, even when I press and holded the lock button, it reboots.. I had found the solution on this forum.
Facing Same issue of Lockscreen when upgraded to 4.1.2
Hi, Can you please tell me where you find the solution for lockscreen issue?
Even I upgraded my S2 GT-I9100 jellybean 2.3.5 to Android 4.1.2 via ODIN, but lockscreen isn't working.
Please need your help.
Lock screen issue !
amk19 said:
Hi, Can you please tell me where you find the solution for lockscreen issue?
Even I upgraded my S2 GT-I9100 jellybean 2.3.5 to Android 4.1.2 via ODIN, but lockscreen isn't working.
Please need your help.
Click to expand...
Click to collapse
I found the solution here on xda forums. I don't have the correct link of the thread, because I have sold my i9100 about 9-10 months ago.
But you can search here. I hope you will find it.
Try searching "Galaxy S2 i9100 Lock screen issue after jellybean/4.1.2" .