Hello,
My 9100 is using 4.0.4, and I would like to upgrade it to 4.1.2 (I9100ZCLSH_I9100OZHLSH_CHN, it's a chinese version because I would like to have a chinese system). BUT FAILED!
I have already installed CWM with super user, and whenever I reboot the phone, there is a yellow triangle, so I BELIEVE it's been rooted successfully.
When I put the phone in download mode, plug it in Odin, the sign shows yellow with COM4 (or 5 or 6), so I believe there is no connection or driver problem.
However, when I load the PDA file I9100ZCLSH_I9100OZHLSH_CHN and start, Odin could not complete the flash. it shows FAIL....
Please see the picture. Could anyone help with this issue !!! Thank you so much !!
Details of my system:
4.0.4
baseband version I9100XXLQ5
Kernel: 3.0.15-I9100XXLPQ-CL223505
Build number IMM76D.XXLQ5
iambigman said:
Hello,
My 9100 is using 4.0.4, and I would like to upgrade it to 4.1.2 (I9100ZCLSH_I9100OZHLSH_CHN, it's a chinese version because I would like to have a chinese system). BUT FAILED!
I have already installed CWM with super user, and whenever I reboot the phone, there is a yellow triangle, so I BELIEVE it's been rooted successfully.
When I put the phone in download mode, plug it in Odin, the sign shows yellow with COM4 (or 5 or 6), so I believe there is no connection or driver problem.
However, when I load the PDA file I9100ZCLSH_I9100OZHLSH_CHN and start, Odin could not complete the flash. it shows FAIL....
Please see the picture. Could anyone help with this issue !!! Thank you so much !!
Details of my system:
4.0.4
baseband version I9100XXLQ5
Kernel: 3.0.15-I9100XXLPQ-CL223505
Build number IMM76D.XXLQ5
Click to expand...
Click to collapse
Anyone can help, please ??!!
Try another odin version.
You can also flash siyah v5 and flash via mobile odin.
Sent from the little guy
Okay buddy u can also root from Cwm.. Use the other way. Search the threads for more information.. Use wanam..
Sent from my GT-I9100 using xda premium
mapps563 said:
Okay buddy u can also root from Cwm.. Use the other way. Search the threads for more information.. Use wanam..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi, Thank you very much.
I think I have already rooted, I flashed with CF-Root-SGS2-XX_OXA_LQ5-v5.6-CWM5, and I could get super user permission.
But the only problem is that I cannot flash a new stock firmwire....
be carefull with 4.0.4 kernel....
Sent from the little guy
gastonw said:
be carefull with 4.0.4 kernel....
Sent from the little guy
Click to expand...
Click to collapse
Hi thanks gastonw.
Yes, I have heard of the danger of 4.0.4 and I wonder if my system has been "soft bricked"... Luckily, it's still working on 4.0.4, though failed in flashing new stock firmwire. I just don't know the reason...
Download new Odin 3.07 version.
Are yu flashing right ROM version.
Maybe corrupted files.
Try redownload it. If you downloaded from SamFirmware maybe its bad download.
Something is wrong with SAM zip files. I downloaded today from SAM and ger ZIP damaged. Downloaded from annother link
Redownload the ROM and flash again with ODIN 3.07
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 07:32 PM ---------- Previous post was at 07:24 PM ----------
One question?
Why chinese JB. Are you chinese or? Dont understand
bihslk said:
Download new Odin 3.07 version.
Are yu flashing right ROM version.
Maybe corrupted files.
Try redownload it. If you downloaded from SamFirmware maybe its bad download.
Something is wrong with SAM zip files. I downloaded today from SAM and ger ZIP damaged. Downloaded from annother link
Redownload the ROM and flash again with ODIN 3.07
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 07:32 PM ---------- Previous post was at 07:24 PM ----------
One question?
Why chinese JB. Are you chinese or? Dont understand
Click to expand...
Click to collapse
Thanks bihslk.
Yes, I'm Chinese. I was using UK version and fine, but now I switched to S3 and I'm giving S2 to my mom. Chinese version will be easier for her
I tried a new version of Odin, the same failure ....
Do you think the firmwire that I downloaded has a problem ?? yes I downloaded it from samfirmwire, and actually I tired 3 different versions, including older ginger bread , none of them worked ... this problem is driving my a little crazy .
There is a way to solve "unflashable" S2, do you recommend I try it?
http://forum.xda-developers.com/showthread.php?t=1457458
iambigman said:
Thanks bihslk.
Yes, I'm Chinese. I was using UK version and fine, but now I switched to S3 and I'm giving S2 to my mom. Chinese version will be easier for her
I tried a new version of Odin, the same failure ....
Do you think the firmwire that I downloaded has a problem ?? yes I downloaded it from samfirmwire, and actually I tired 3 different versions, including older ginger bread , none of them worked ... this problem is driving my a little crazy .
There is a way to solve "unflashable" S2, do you recommend I try it?
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I think you have corrupted files.
Try to download the same ROM again but from annother LINK. NOT Hotfile
If it doesnt work neither. Then try to install ICS Chinese for you REGION and try update via OTA or KIES
It it doesnt work 2 then try the link you posted ABOVE
One more thing. I saw you have COM6 or something. It sounds like USB HUB ports.
Try to connect phone to the original PC USB in front of the PC or MotherBoard USB not in the HUBS.
Make ONE PC reboot 2
---------- Post added at 08:02 PM ---------- Previous post was at 07:48 PM ----------
Find your Firmware here
http://samsung-updates.com/device/?id=GT-I9100
Here it is
http://hotfile.com/dl/193280116/4d4...m-GT-I9100-CHZ-I9100ZCLSH-1359021326.zip.html
Have you tried mobile odin?
You can flash LSJ and after that any chinese stock ROM.
Sent from the little guy
Problem solved !!!
gastonw said:
Have you tried mobile odin?
You can flash LSJ and after that any chinese stock ROM.
Sent from the little guy
Click to expand...
Click to collapse
Hello guys,
Thank you soooo much for all your advises ! Without your suggestions, I would not be able to solve this problem.
In the end, I think its the firmware V.S. phone format problem.
I9100OZHLSH_CHN, is the official firmware to chinese S2 users. Mine is actually Canadian i9100 M, but I flashed it with UK version so it shows I9100. I read a thread in chinese, saying that Bootloader is needed, which use .pit to format the partition from eur to chn. Thus, I guess no matter how many times I try, without Bootloader, the flash would be failed. (I did not really try the bootloader, seems to be risky, if anyone in the future needs it, pls follow this link in chinese though.... http://bbs.anzhi.com/forum.php?mod=viewthread&tid=6347421&reltid=6324097&pre_pos=2&ext= ).
I follow this instruction to recover my system to 4.0.3, which I have better control ..
http://forum.xda-developers.com/show....php?t=1457458
Then I found this "Official Android 4.1.2 ZSLSH Jelly Bean Firmware", which they say it's released in China but can also be install in EU international phones, I succeeded ! This firmware has both english and Chinese language packages. :fingers-crossed:
http://www.ibtimes.co.uk/articles/4...icial-android412-zslsh-jellybean-firmware.htm
So overall, ZSLSH works on my phone, but ZHLSH will never I guess.
Thank you all again, and hope this may help others who may encounter this issue in the future !!!!!
I9100 & i9100M has got the same hardware so it should work.
Sent from the little guy
Related
New European Firmware
http://hotfile.com/dl/130667828/158868e/S5830XWKPW_S5830OXXKPC_S5830XWKP7.rar.html
Build Date: August 22, 2011
CSC:OXX (Portugal?)
password for archive: samfirmware.com
No new Radio Firmware S5830XWKP7 maybe this is the last radio firmware. This was included in KPO, KPT
Flash via ODIN
It is a One Package file so make sure you are on a 2.3.3 Base
If you are CM7 2.3.5 this is unrelated the Base you installed e.g KPO, KPO is 2.3.3 so you are ok to install this otherwise install a full package 2.3.3 release then flash KPW.
WINDOWS XP USERS BEWARE! ODIN 4.42 HAS ISSUES WITH XP PLEASE USE OLDER ODIN OR USE WINDOWS 7 TO FLASH!
This was released via KIES in portugal. I guess CSC = Portugal
Cheers
Tried flashing in Windows XP with ODIN 4.42 and won't flash stuck on mibib. Luckily when I unplugged it and took the battery out for 10 secs I went back into Download Mode and still wouldn't do anything.
EDIT: Used Windows 7 and flashed it ok. All drivers for galaxy ace in Windows xp where correct. (Kies)
ODIN 4.42 must not like windows xp.
Jekle_Ace said:
Tried flashing in Windows XP with ODIN 4.42 and won't flash stuck on mibib. Luckily when I unplugged it and took the battery out for 10 secs I went back into Download Mode and still wouldn't do anything.
EDIT: Used Windows 7 and flashed it ok. All drivers for galaxy ace in Windows xp where correct. (Kies)
ODIN 4.42 must not like windows xp.
Click to expand...
Click to collapse
You seem to try every single ROM
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
You seem to try every single ROM
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
I know, Right? BTW it's the fastest stock rom yet. Just install Juwe's ram script and it's flying!
Jekle_Ace said:
I know, Right? BTW it's the fastest stock rom yet. Just install Juwe's ram script and it's flying!
Click to expand...
Click to collapse
Did you try that new chinese rom too? Any review? (Sorry for being offtopic)
Btw shouldn't this be in the General Section ?
Forever living in my Galaxy Ace using XDA App
Yea, 99% of times mods have to move it there
redlag said:
Yea, 99% of times mods have to move it there
Click to expand...
Click to collapse
Because some users don't read the stickies, and some users want everything stickied... =P
Cheers
Zecanilis said:
Because some users don't read the stickies, and some users want everything stickied... =P
Cheers
Click to expand...
Click to collapse
Lol , is that a hint to me ? XD
Forever living in my Galaxy Ace using XDA App
OXX is Portugal alright - but I can't get this update (or any other) on my Portuguese Galaxy Ace through Kies at all:-
PDA: S5830XWKB4
PHONE: S5830XXKA6
CSC: S5830OXXKB3
Can anyone offer any clue as to why Kies won't update? I've read elsewhere that its due to a mismatched product code/CSC but my product code is right for an unlocked Portuguese Ace as far as I can tell.
I guess, because I'm stuck on 2.2.1, I can't flash this single-package firmware via Odin
davew said:
OXX is Portugal alright - but I can't get this update (or any other) on my Portuguese Galaxy Ace through Kies at all:-
PDA: S5830XWKB4
PHONE: S5830XXKA6
CSC: S5830OXXKB3
Can anyone offer any clue as to why Kies won't update? I've read elsewhere that its due to a mismatched product code/CSC but my product code is right for an unlocked Portuguese Ace as far as I can tell.
I guess, because I'm stuck on 2.2.1, I can't flash this single-package firmware via Odin
Click to expand...
Click to collapse
If your Kies won't update , ODIN is your friend
Forever living in my Galaxy Ace using XDA App
If your Kies won't update , ODIN is your friend
Click to expand...
Click to collapse
This I have been told
Reinstalled Kies, it updated with a hotfix and now I get a much clearer error message:-
The current firmware version is not an official release
Firmware upgrade service for unofficial versions is not supported
So how does a new phone, fresh out of the box on Saturday, end up in this kind of state I wonder?
davew said:
This I have been told
Reinstalled Kies, it updated with a hotfix and now I get a much clearer error message:-
The current firmware version is not an official release
Firmware upgrade service for unofficial versions is not supported
So how does a new phone, fresh out of the box on Saturday, end up in this kind of state I wonder?
Click to expand...
Click to collapse
Wow .
Sorry but I've ditched Kies a godly long time ago so I can't help you
Forever living in my Galaxy Ace using XDA App
davew said:
So how does a new phone, fresh out of the box on Saturday, end up in this kind of state I wonder?
Click to expand...
Click to collapse
That is the question you should be asking from the shop you bought the phone from. Never heard of an error like that...
That is the question you should be asking from the shop you bought the phone from. Never heard of an error like that...
Click to expand...
Click to collapse
Quite likely they're complete divs who don't even know what firmware is.
Really not sure what to do now.
---------- Post added at 01:21 PM ---------- Previous post was at 12:35 PM ----------
OK, I have a plan now.
I've downloaded the firmware this thread is about having done enough searching around to satisfy myself that this is a portuguese operator-unlocked firmware for the Ace. Now since I have a portuguese, operator-unlocked Ace (GT-S5830OKATPH) by flashing this I should be able to get further updates through Kies.
So if I root, flash Clockworkmod recovery, and take a backup before flashing this firmware, I should be able to go back to a stock state in case I screw things up or the firmware isn't what I think it is.
Does that sound like a reasonable plan? can I unroot and remove Clockworkmod Recovery in case I need to go back to a complete "as-delivered" state for warranty purposes?
Any tips much appreciated.
davew said:
Quite likely they're complete divs who don't even know what firmware is.
Really not sure what to do now.
---------- Post added at 01:21 PM ---------- Previous post was at 12:35 PM ----------
OK, I have a plan now.
I've downloaded the firmware this thread is about having done enough searching around to satisfy myself that this is a portuguese operator-unlocked firmware for the Ace. Now since I have a portuguese, operator-unlocked Ace (GT-S5830OKATPH) by flashing this I should be able to get further updates through Kies.
So if I root, flash Clockworkmod recovery, and take a backup before flashing this firmware, I should be able to go back to a stock state in case I screw things up or the firmware isn't what I think it is.
Does that sound like a reasonable plan? can I unroot and remove Clockworkmod Recovery in case I need to go back to a complete "as-delivered" state for warranty purposes?
Any tips much appreciated.
Click to expand...
Click to collapse
To remove root + get back stock recovery , just flash a stock firmware and you're all set
Forever living in my Galaxy Ace using XDA App
To remove root + get back stock recovery , just flash a stock firmware and you're all set
Click to expand...
Click to collapse
OK - flashing a stock firmware also changes the recovery partition, got it.
Is there anything else I should know before I try this?
davew said:
OK - flashing a stock firmware also changes the recovery partition, got it.
Is there anything else I should know before I try this?
Click to expand...
Click to collapse
If you do get an SoD at Gingerbread , wipe everything in CWM and restore to Froyo
Forever living in my Galaxy Ace using XDA App
I installed KPW just to see how it works. I installed cf-root b82, converted to ext4, changed some things with uot and it's all ok. The only problem is the lag when unlocking. When I press the power button it takes a long time for the screen to turn on. This also happens when I finish a call and move the phone away from my ear. Is there any way to speed things up a bit? Can I deodex it and what good will it bring?
p.s. I also installed Checks V4 ram script.
Hi!
I currently have my s2 rooted and on CM9. My phone is/was the european version GT I9100. I know that region is getting the ICS update on 3/10. Can some one direct me to copies of a stock rom that will be receiving the update?
Thanks in advance!
Since you have already flsahed your phone with CM9 why not just flash the official ICS when it comes out?
Seems he want to install ics via kies
Sent from my GT-I9100 using xda premium
Have you seen this? http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup.jsp?seq=422548&cdsite=ph
bala_gamer said:
Seems he want to install ics via kies
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Correct sir
Scared27 said:
Since you have already flsahed your phone with CM9 why not just flash the official ICS when it comes out?
Click to expand...
Click to collapse
Think there will be a stock ICS rom released on xda the 10th?
xmoo said:
Have you seen this? http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup.jsp?seq=422548&cdsite=ph
Click to expand...
Click to collapse
If your referring to
"(4) Customized firmware
If unofficial or customized firmware is installed in the mobile, unexpected problem can happen during upgrading"
Thats why I want to go back to stock.
They don't expect you to flash the firmware via CWM or Odin. I don't think it will be necessary to flash a stock rom first
ccab said:
They don't expect you to flash the firmware via CWM or Odin. I don't think it will be necessary to flash a stock rom first
Click to expand...
Click to collapse
Yeah but Kies does not recognize my phone with CM9 on it
http://forum.xda-developers.com/showthread.php?t=1075278
Found it, if anyone else needs.
shadhman said:
http://forum.xda-developers.com/showthread.php?t=1075278
Found it, if anyone else needs.
Click to expand...
Click to collapse
wouldn't it be best to wait before flashing the official one through kies mate. cause you are only going to after a few days when all the custom official ones be released going to root your phone again. i was thinking the same but i am going to hold off for a while
Good luck getting official firmware updates via Kies if you're running non-stock firmware
ccab said:
They don't expect you to flash the firmware via CWM or Odin. I don't think it will be necessary to flash a stock rom first
Click to expand...
Click to collapse
Did I say you shall update it via KIES? No!
Sent from my GT-I9100 using Tapatalk
Dear All,
I have flashed with a stock rom from below mentioned article
http://forum.xda-developers.com/showthread.php?t=1075278
Still my Samsung S2 is not recognized by Kies.
Kindly help.
Thanks
Pavan
I can think of 2 possibilities why it might not work.
-wrong CSC: find your country's CSC and change yours to match. Here and Here
your ROM must have your CSC or a Multi-CSC where your CSC is included.
-"Zombie"-ROM: A ROM patched together from different originals, e.g. a good stock kernel from one ROM with a good modem from another ROM. This shouldn't be, because you took an original from intratech's Thread. But if you want, you can also try this.
I hope this helps.
If I am Orange UK stock do I just find the UK Stock XEU and put it on?
---------- Post added at 10:58 AM ---------- Previous post was at 10:35 AM ----------
At the moment I have
PDA: I9100BVKJ4
CSC I9100ORAKJ4
Would
I9100XWKE1
MULTIXEUKD1
Work ok?
It looks like you already have an ORANGE-ROM. what exactly are you trying to do? If you want to get rid of the orange branding, what you have there looks good.
shadhman said:
http://forum.xda-developers.com/showthread.php?t=1075278
Found it, if anyone else needs.
Click to expand...
Click to collapse
Don't you feel kinda stupid after beginning a thread with an OLD question and then having to post on that thread that you found your answer within that same forum from a thread that is stickied and out there for everybody to use
Hi all, I have a brand new galaxy SII bought in Belgium. I wanted to root it but something went wrong. I used this guide:
http://galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/
Now I think I know what went wrong, the guide is only for a device already on ICS (i think) which was not the case. Trouble is that I do not know which kernel version was on the device before the flash and now he doesn't boot anymore. I just see the galaxy S2 logo with triangle and that's it.
Can you please help me? I'm sorry, I know I was really not careful enough...
If you can get into download mode, follow the guide here to root your phone & consider yourself lucky.
If you can't get into download or recovery mode, you're probably boned. Try a jig before you send it to a service center or have it JTAG repaired by a 3rd party.
MistahBungle said:
If you can get into download mode, follow the guide here to root your phone & consider yourself lucky.
If you can't get into download or recovery mode, you're probably boned. Try a jig before you send it to a service center or have it JTAG repaired by a 3rd party.
Click to expand...
Click to collapse
Thank you for the very quick answer I can get to the download mode without a problem so I think its repairable. Also thank you for the link, problem is that I do not know which version of the insecure kernel i need since the phone doen't boot anymore and I can't see the about phone page... Any tips on that? Or will it be a trial and error game to see with which kernel the phone boots?
Thank you very much for your help!
OK. Being able to get into download mode is good. Now, finding the kernel that came with the phone...
I probably wouldn't go down the trial & error route, have a look at this thread . Don't worry about the links, what you need to do is find the matching kernel for your carrier & country. Then you can look for the matching insecure kernel in the CFRoot thread I linked you to in the previous post.
Edit to add - Linked to wrong thread in first instance, OP, make sure the link you click on takes you to 'Official I9100 Carrier Branded Firmwares'.
Thank you very much. You really are a great help I will try it tommorow morning when I have a bit more time (I don't want to screw it up again ).
No probs ;-) If you have any dramas, post in this thread again. Important thing is to make sure you find the right kernel in that carrier branded firmware thread in the 2nd post, then in the CFRoot kernel thread find the closest match.
For example, if your original kernel is --KF2, you would try and find a matching CFRoot kernel. If there is a KF2 CFRoot kernel, good. You use that. But, if there wasn't a KF2 CFRoot kernel but there was a KF1 or KF3, you could use either of those. Again, this is just an example but should give you an idea of what to look for.
I just booted succesfully. No data lost, everything just fine I did exactly what you said and it worked like a charm. I cannot thank you enough Just wanted to let you know
Really ? Got the phone rooted & all working well ? Very good No probs, glad it worked out well for you/no data loss & most importantly no borked phone
Yep all working fine now. I even put ressurection ics on it without a single problem very glad you were so helpful!
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Flash a stock rom via Odin. That will give you a 'clean slate'. Search Intratech's firmware thread, if the links don't work search Samfirmware.com for the stock firmware you need.
Alternatively, you can get the latest firmware for the phone model/carrier/country with the PC version of Checkfus (search for it on here/Google). The firmware package you download can be flashed in Odin following the instructions in Intratech's thread.
you were the one who solved OP problems n now here you are again to help me out. Seriously, thanks.. I'll definitely will give it a try soon when i got back n I'll report back.
Thanks man.
ethanmars said:
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Click to expand...
Click to collapse
1. Don't panic!!
Well if your unsure which version it is you may have to try them all
download them here from chainfires post .. i'd probably start at lpq ??
http://forum.xda-developers.com/showpost.php?p=20075898&postcount=8
---------- Post added at 09:38 PM ---------- Previous post was at 09:34 PM ----------
MistahBungle said:
Flash a stock rom via Odin. That will give you a 'clean slate'. Search Intratech's firmware thread, if the links don't work search Samfirmware.com for the stock firmware you need.
Alternatively, you can get the latest firmware for the phone model/carrier/country with the PC version of Checkfus (search for it on here/Google). The firmware package you download can be flashed in Odin following the instructions in Intratech's thread.
Click to expand...
Click to collapse
I seem to be following you around lol not on purpose
I'd wouldn't flash a stock rom "straight off the bat" .. Only I would do that as a last resort!
Flashing the correct kernel will make the phone boot up with NO LOSS of data and all will be back to normal
Flashing a stock ROM will mean you have to start all over again.. (like we do anyway when we flash different custom roms)
So I'm not saying your wrong, just saying try a different kernel first!
Thanks Eudemony, I'll try kernel first. So it seems like there are 2 LPBs and 2 LPQs and all of them about 17 different kernels for ICS. Alright, I'll try LPQ first. But, is it okay to keep on flashing/Odin-ing each and every single of it? Any bad consequences of that? Or side effects? hehe, sounded like i'm trying out new drugs.
ethanmars said:
Thanks Eudemony, I'll try kernel first. So it seems like there are 2 LPBs and 2 LPQs and all of them about 17 different kernels for ICS. Alright, I'll try LPQ first. But, is it okay to keep on flashing/Odin-ing each and every single of it? Any bad consequences of that? Or side effects? hehe, sounded like i'm trying out new drugs.
Click to expand...
Click to collapse
If it is the wrong kernel .. you know the result as you have just done that..
and thats what you are trying to fix
If its the right kernel .. everything should "magically" load back up
ethanmars said:
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Click to expand...
Click to collapse
Seems like you're 'downgrade' your friend's S2... If AP unit then take a look at your friend's S2 box any IMEI or Warranty Card which can identified the phone origin region.. My phone AP unit no problem flashing latest open europe firmware from samfirmware website... Already rooted and no annoying yellow triangle... flash counter zero... thanks triangle away.. In your case once your friend's phone region is identified then download accordingly.. flash the correct firmware via odin... deal with triangle later.. most important ensure your friend's phone working and please avoid softbrick..
IMEI will identify aprox build date and area of release .
Try this checker
http://www.numberingplans.com/?page=analysis&sub=imeinr
jje
Lol.. succeed on the first try.. its LPQ.. phew!! thanks a bunch to both of you for helping me out of this panic attack mode. hehe
ethanmars said:
Lol.. succeed on the first try.. its LPQ.. phew!! thanks a bunch to both of you for helping me out of this panic attack mode. hehe
Click to expand...
Click to collapse
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Eudemony said:
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Click to expand...
Click to collapse
Seriously? I didnt know that. Actually, before upgrading his phone (lets call him Z), Y asked me to flash CM9 but then since his phone wasn't yet rooted with 2.3.4 on top, I decided to update using kies to see whats it like to have an official ics (youtube isnt enough, hehe) but to no avail. Kies told me the phones having the latest firmware even though I've updated kies to latest version.. hmmm..
Eudemony said:
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Click to expand...
Click to collapse
That, yes, that's what I thought too. =)
Hello,
I recently got a gift from a friend in the form of a Samsung Galaxy S2.
Last time I've owned a samsung phone was before the smartphone era, however I am familiar with other smartphones running android.
This phone, has the following info:
Android Version: 2.3.5.
Baseband Version: I9100XXKI4
Kernel Version: 2.6.35.7-I9100XWKI8-CL616395 [email protected] #2
Build Number: GINGERBREAD.XWKI8
Kies Info --> PDA:KI8 / PHONE:KI4 / CSC:KI2 (ODK)
If I try to update with Kies it says that my device's current firmware is not supported to update via Kies.
From what I've researched, the region code at the end (ODK) means that the phone was originally purchased in Sweden. Will that be a problem?
As far as I know the phone was not locked when I got it since I'm using a different carrier in a different country.
I tried to look up codes for Galaxy S2 that can tell me if the phone has a locked bootloader, if it can be unlocked, etc, but without any success.
So my questions are the following:
1. How can I update the phone to the most recent samsung firmware?
2. I know that official firmware comes with a lot of bloatware and I wish to get rid of it, and for that I need root, how do you do it on a samsung?
(i have no idea where to begin since my last phone's software/steps followed seem to be completely different)
3. Is there a way to change the firmware/region code or whatever to the country I'm currently residing in?
and last but not least, any suggestions on what I should do?
Cheers and thanks.
justinhd said:
1. How can I update the phone to the most recent samsung firmware?
2. I know that official firmware comes with a lot of bloatware and I wish to get rid of it, and for that I need root, how do you do it on a samsung?
(i have no idea where to begin since my last phone's software/steps followed seem to be completely different)
3. Is there a way to change the firmware/region code or whatever to the country I'm currently residing in?
and last but not least, any suggestions on what I should do?
Cheers and thanks.
Click to expand...
Click to collapse
1. Afaik Kies will only update if you are using the stock firmware from the country you are connecting from. Custom firmwares will not work. The easiest way to flash the latest stock firmware is via Odin.
2. Install a kernel that roots your phone like Siyah or Dorimanx.
3. Search for threads in XDA about how to change your CRC.
Hello Megaritis,
Thank you for your reply.
Regarding the CRC, I need to change it to the country i'm residing in only if I plan on updating my phone via Kies, right?
I'm not planning on flashin JB just yet because i think it still needs some polishing. I want to flash an official ICS ROM on Siyah's Kernel.
My current to do is:
1. Get Odin, and flash the new kernel.
2. Get an official ICS ROM and flash it.
3. Get Titanium Backup and remove the bloatware if any.
4. Use the phone.
Anything else I should do / know?
Soo...here is where I am so far:
1. Downloaded SiyahKernel v5.0.1.
2. Downloaded PDA and CSC firmware for the country I reside in (from SamMobile.com).
Whats next? Stick them all into Odin and hope for the best?
PDA -> PDA
CSC -> CSC
PHONE -> SiyahKernel
???
justinhd said:
Soo...here is where I am so far:
1. Downloaded SiyahKernel v5.0.1.
2. Downloaded PDA and CSC firmware for the country I reside in (from SamMobile.com).
Whats next? Stick them all into Odin and hope for the best?
PDA -> PDA
CSC -> CSC
PHONE -> SiyahKernel
???
Click to expand...
Click to collapse
Instead of doing all this together I suggest you just flash neat rom Lite (ics version, the latest v4 is JB) its the stock firmware with every bloatware removed and it is pre-rooted. Even v4 is pretty much stable and cool too as it is based on the leaked stock JB.
And several flashable addon are also available for it.
And If you are going to proceed with what you downloaded, flash Siyah after flashing the stock firmware.
Also before you proceed I suggest you check for brick bug, which can potentially superbrick your phone, Stock ICS 4.0.4 Kernel contains the problematic command, if you are effected, never perform any wipe or erase or reset with the stock kernel, just flash Siyah before doing all that.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Could you post a small walkthrough on how I do that?
EDIT: My current android version is 2.3.5. and I plan to flash 4.0.3. stock and then remove bloatware.
This is the link to the post with detailed instructions
http://forum.xda-developers.com/showthread.php?t=1569686
Remember "neat rom Lite" is suggested not just "neat rom" , and read the forum and instructions carefully.
NeatROM v3 is ICS I guess. And it contains v3 Siyah just flash the newest (which you downloaded) one if you feel like it(it's pretty much better)
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
This is the link to the post with detailed instructions
http://forum.xda-developers.com/showthread.php?t=1569686
Remember "neat rom Lite" is suggested not just "neat rom" , and read the forum and instructions carefully.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 07:51 AM ---------- Previous post was at 07:50 AM ----------
NeatROM v3 is ICS I guess.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
And how do i check for that brick bug?
justinhd said:
And how do i check for that brick bug?
Click to expand...
Click to collapse
There is an app called eMMc check in play store, but you don't need to worry if you're flashing a custom rom only the stock 4.0.4 has it.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
There is an app called eMMc check in play store, but you don't need to worry if you're flashing a custom rom only the stock 4.0.4 has it.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Right.
I flashed CF-Root in order to root the current os.
Now, I wanna flash to 4.0.3. first. I downloaded an archive with a tar from sammobile.com from a carrier in my country.
How do I aproach this?
I put the .tar i downloaded in PDA in ODIN, and flash that first, and then put the Siyah tar in the PHONE field in ODIN and flash that second?
So long story short if you want to perform a factory reset,wipe do it from a kernel that is deemed safe like Siyah latest (v5.0.1 I guess).
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:07 AM ---------- Previous post was at 08:03 AM ----------
justinhd said:
Right.
I flashed CF-Root in order to root the current os.
Now, I wanna flash to 4.0.3. first. I downloaded an archive with a tar from sammobile.com from a carrier in my country.
How do I aproach this?
I put the .tar i downloaded in PDA in ODIN, and flash that first, and then put the Siyah tar in the PHONE field in ODIN and flash that second?
Click to expand...
Click to collapse
Siyah must be flashed later again via PDA.
Edit : Don't flash it via phone, it should be done via PDA.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
So long story short if you want to perform a factory reset,wipe do it from a kernel that is deemed safe like Siyah latest (v5.0.1 I guess).
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:07 AM ---------- Previous post was at 08:03 AM ----------
Siyah must be flashed later again via PDA.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
I get what you're saying, both files go into PDA and they get flashed separatly, Siyah being the second in line.
But I have the following problem, or do i?
My current kernel is XWKI8 and as far as I know you can't flash different CSC/FIRMWARE if its not compatible with the kernel.
justinhd said:
I get what you're saying, both files go into PDA and they get flashed separatly, Siyah being the second in line.
But I have the following problem, or do i?
My current kernel is XWKI8 and as far as I know you can't flash different CSC/FIRMWARE if its not compatible with the kernel.
Click to expand...
Click to collapse
Yes, so flash Siyah first, then the rest.
When I was referring to flashing Siyah I meant updating it, but if you have an incompatible kernel you must flash siyah first.
But if you are flashing a stock firmware (not tampered with) the kernel doesn't matter as the PDA file contains it and will overwrite the existing one with a compatible one.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Yes, so flash Siyah first, then the rest.
When I was referring to flashing Siyah I meant updating it, but if you have an incompatible kernel you must flash siyah first.
But if you are flashing a stock firmware (not tampered with) the kernel doesn't matter as the PDA file contains it and will overwrite the existing one with a compatible one.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Agreed, I raised the problem only because sammobile.com's info on the file i downloaded doesn't list a kernel and I assumed that it only contains the PDA and CSC.
So if you are flashing with tar files you most probably don't need to worry about kernel, for example in neat rom Lite v3 it includes Siyah v3, but in case of flashing zip files you need a compatible kernel before hand.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:22 AM ---------- Previous post was at 08:20 AM ----------
In some cases PDA file won't contain kernel in such a package the kernel will be given separately, like the CSC file.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
---------- Post added at 08:30 AM ---------- Previous post was at 08:22 AM ----------
Bro just make sure what kind of file do you have? A zip or a tar? Flashing a zip(it's done via CWM) - - >compatible kernel required
Flashing a tar(via Odin) - - >if kernel included nothing to worry just flash.
peace
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Hmm, I think the .tar file does contain everything needed, even though i flashed siyah first....
I guess i'll have to re-flash it after its done.
By the way, any idea how I remove those flash counts?
justinhd said:
Hmm, I think the .tar file does contain everything needed, even though i flashed siyah first....
I guess i'll have to re-flash it after its done.
By the way, any idea how I remove those flash counts?
Click to expand...
Click to collapse
Usb jig is your hardware and easiest option you can get it from eBay, or since you are using ICS, triangle away by chainfire will do the trick you can get it for free from his forum or you can buy him a beer and buy it from the play store.
Triangle Away is pretty easy too... Lol
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Okay so its done. For some reason the android version is indeed 4.0.4 but the phone is okay, i downloaded that app and it states that the chip is ok and again, for some other reason, its still rooted, i don't know if the tar i had contained a kernel or not, but its all good now. I HOPE.
EDIT: Wops....spoke too soon, i saw the superuser app on my home screen and I assumed its rooted, but its not. Gotta re-flash siyah's kernel now.
justinhd said:
Okay so its done. For some reason the android version is indeed 4.0.4 but the phone is okay, i downloaded that app and it states that the chip is ok and again, for some other reason, its still rooted, i don't know if the tar i had contained a kernel or not, but its all good now. I HOPE.
EDIT: Wops....spoke too soon, i saw the superuser app on my home screen and I assumed its rooted, but its not. Gotta re-flash siyah's kernel now.
Click to expand...
Click to collapse
Good work.. And lol.. Many has done that mistake and the cry about it in the forums.. Lol..
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Good work.. And lol.. Many has done that mistake and the cry about it in the forums.. Lol..
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
Well, I flashed the kernel but now titanium backup is stuck at Searching Application Data, but it did prompt me for root priviledges... :|
EDIT: Meh...it was probably stuck because it was trying to access the SD card but my cable was still plugged in....fixed.
Now, i have one last question for the night: now i have 2 "root" apps in my homescreen, one is superuser and the other is supersu, judging by the fact that the "superuser" one was there when I first booted, I suspect that its useless and the supersu is the one with the root. How do I remove it?
I was busy trying to flash cm10.2 RC for my i9100 and ended up soft-bricking my phone. Not sure what happened, probably just me doing something stupid. If I recall the correct way to handle this is:
1)Find stock rom+kernel
2) install KIES on pc
3) flashing using ODIN in download mode
The problem is that I have no idea where to get the 4.1.1 stock rom and kernel from for my phone. I'm from Canada and using Virgin/Bell Mobile, so I tried looking up the CSC code and stuff. I stumbled upon http ://samsung-updates. com/device/?id=GT-I9100 (needed 10 posts and didnt want to just make random posts) but I have no idea which rom is the correct one. Would really appreciate some help with this (resources for stock roms+kernel) Could I use philz safe stock as a kernel? Christ I swear I used to know how to do all this.
Thanks in advance.
Which model number?
Akar007 said:
Which model number?
Click to expand...
Click to collapse
gt-i9100M
please verify that your model number is GT-I9300 by going to Settings->About->Model Number
Akar007 said:
please verify that your model number is GT-I9300 by going to Settings->About->Model Number
Click to expand...
Click to collapse
Ah.... I soft-bricked my phone meaning I cant get past the boot screen. Can't get to recovery mode or boot, only download mode. And my phone is not a glaxay s3 (i9300) its a i9100/i9100m, a galaxy s2 international edition.
Check out this thread, I am pretty sure you find answer here
http://forum.xda-developers.com/showthread.php?t=1193695
CAUTION: This thread is only for Canadian version.
---------- Post added at 09:50 AM ---------- Previous post was at 09:26 AM ----------
If you find answer , tell me
1kon said:
I was busy trying to flash cm10.2 RC for my i9100 and ended up soft-bricking my phone. Not sure what happened, probably just me doing something stupid. If I recall the correct way to handle this is:
1)Find stock rom+kernel
2) install KIES on pc
3) flashing using ODIN in download mode
The problem is that I have no idea where to get the 4.1.1 stock rom and kernel from for my phone. I'm from Canada and using Virgin/Bell Mobile, so I tried looking up the CSC code and stuff. I stumbled upon http ://samsung-updates. com/device/?id=GT-I9100 (needed 10 posts and didnt want to just make random posts) but I have no idea which rom is the correct one. Would really appreciate some help with this (resources for stock roms+kernel) Could I use philz safe stock as a kernel? Christ I swear I used to know how to do all this.
Thanks in advance.
Click to expand...
Click to collapse
I'm not sure what you flashed because the international Galaxy S2 hasn't received any CM10.2 RC builds
Bleeding-Edge-Armour said:
I'm not sure what you flashed because the international Galaxy S2 hasn't received any CM10.2 RC builds
Click to expand...
Click to collapse
yeah, my bad it turned out to be a nighty. I didnt read the list properly. lol
Akar007 said:
Check out this thread, I am pretty sure you find answer here
http://forum.xda-developers.com/showthread.php?t=1193695
CAUTION: This thread is only for Canadian version.
---------- Post added at 09:50 AM ---------- Previous post was at 09:26 AM ----------
If you find answer , tell me
Click to expand...
Click to collapse
So I used the link you gave me to get it to GB stock rom+kernel (since I read intratechs stuff might not work). Then using KIES I got to 4.1.2. AT that point my firmware info changed from PDA:KG2/PHONE:KG2/CSC:KG2 (BMC) to PDA:MA5/PHONE:MA5/CSC:MA5(BMC). No idea what that means. Went to http://forum.xda-developers. com/showthread.php?t=1103399 to grab a rooted kernel with cwm. Then my phone just gets stuck in a boot loop or fails to launch. Tried siyah kernels v2 and v3, they fail (boot loops). Dorimanx just causes my phone to freeze midway between the samsung screen animation and the warning triangle.
Basically, Im stuck right now only being able to boot successfully to stock 4.1.2 un rooted. Any idea where to head from there?
1kon said:
So I used the link you gave me to get it to GB stock rom+kernel (since I read intratechs stuff might not work). Then using KIES I got to 4.1.2. AT that point my firmware info changed from PDA:KG2/PHONE:KG2/CSC:KG2 (BMC) to PDA:MA5/PHONE:MA5/CSC:MA5(BMC). No idea what that means. Went to http://forum.xda-developers. com/showthread.php?t=1103399 to grab a rooted kernel with cwm. Then my phone just gets stuck in a boot loop or fails to launch. Tried siyah kernels v2 and v3, they fail (boot loops). Dorimanx just causes my phone to freeze midway between the samsung screen animation and the warning triangle.
Basically, Im stuck right now only being able to boot successfully to stock 4.1.2 un rooted. Any idea where to head from there?
Click to expand...
Click to collapse
So i would guess you want to get back onto a custom rom like CM? Just flash this version of dorimanx on your phone via odin and it should boot, 8.43 for samsung based roms you must use those that start with 8, e.g. 8.43 or 8.41 etc... Once you flash it you can now boot into CWM recovery and install CM as you always had.
NVm, kinda got it working on SlimBean with a CWM 6.0 kernel. Thanks for all the help from the XDA community.