A friend brought me a 9100G device after he tried to install on it a room for the 9100T device , so the device got stuck.
I will not expand on all the things I tried. but for now I re-installed the old bootloader of GB. and can get to download mode but beyond that all the rooms I'm trying to install nether got stuck in the middle .. or it installs but does not work.
If someone can explain from the beginning step by step how I install a good version, I would appreciate it very much.
Thank you.
You should post this in the correct section, because the i777 is not the correct section, which is where this is currently posted.....
Your first step should be to learn to navigate XDA
Thread moved
anyone?
please?
Related
I'm still fairly New here, and don't know anything about flashing and all that other stuff. Getting to the point I got the T-Mobile OTA update today and when installing it "Bricked" my Vibrant. I've been doing a lot of reading on these forums and I got to the point where I go into "Download Mode" It says install ODIN. I searched for that, I did find one file however I don't think it's the correct version because some of the direction I've read mentioned something about PIT and I don't see that so can someone PLEASE provide me a link to the right version as well as the the stock Vibrant Rom and Instructions help is GREATLY APPRECIATED. THANKS IN ADVANCE!!!!
gridironbear said:
I'm still fairly New here, and don't know anything about flashing and all that other stuff. Getting to the point I got the T-Mobile OTA update today and when installing it "Bricked" my Vibrant. I've been doing a lot of reading on these forums and I got to the point where I go into "Download Mode" It says install ODIN. I searched for that, I did find one file however I don't think it's the correct version because some of the direction I've read mentioned something about PIT and I don't see that so can someone PLEASE provide me a link to the right version as well as the the stock Vibrant Rom and Instructions help is GREATLY APPRECIATED. THANKS IN ADVANCE!!!!
Click to expand...
Click to collapse
Go to the Vibrant Development Forum and look at the Vibrant Bible, it will answer all of your questions and give you everything you need.
http://forum.xda-developers.com/showthread.php?t=771111
Hi everyone,
can someone tell me where i can find a detailed instruction, how to put onother rom on my Galaxy Tab 10.1v?
I am absolut new to this and i need an instruction how to flash from the beginning (preperation) till the end (finished flashed device).
I find the roms and everything, but nowhere an instruction.
Please help me
Thanks a lot!
chris
Hem...don't you see the stickies ?
However, on advice : use Ubuntu to work things out...
I dont want ubuntu, i want, 3.1 witz touchwiz...
You don't get it : using Ubuntu as an OS allows you to flash the Recovery (needed to flash ROMS) more easily than Windows.
Again : check the stickies ! Unlock your bootloader and get root is all you need.
Okay, got this, but then, when i have the 3.1 files, what then? There is noch instruction, sorry, but i am new to this, everyone startet once for the first time like me. So please be paitent
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
BambergerTyp said:
Okay, got this, but then, when i have the 3.1 files, what then? There is noch instruction, sorry, but i am new to this, everyone startet once for the first time like me. So please be paitent
Click to expand...
Click to collapse
Check this. You have steps as well as video tutorial
http://galaxytabhacks.com/category/galaxy-tab-10-1-hacks/
Hello everyone , Can anyone plz help Me , I been reading forums from a week now and read all the topics but i m still not understanding how to install StreakMod Recovery
I m Currently Running android 2.2.2 Stock on 351
I Managed to Root My Device Now Can anyone Plz Guide me on how to install StreakMod , i m Afraid of Bricking my Device , SO plz
Step by step guide would b appricated thnx in advance plz help
Sent from my Dell Streak using xda premium
[REF]Everything you wanted to know about the streak, but were too busy bricking it
1. That link is a sticky at the top of the General forum and is pretty damn hard to miss. The fact that you somehow missed said sticky thread shows me that you didn't bother searching at all for information that has been posted more times than I care to count.
Searching before you post is the number one rule on this site. You'll find the search button on the right side of the screen, across from the yellow "Post Reply/New Thread" button at the top of the page.
2. Something tells me you used one of the one-click rooting methods to root your Streak. Well, the one click methods aren't recommended. The recommended method is to install StreakMod Recovery then install Superuser.zip using StreakMod. The aforementioned link gives you what you need to know. So go read up.
hi i flashed my xperia ray with the ST18i_Official_4.0.4_Stock_ROM_RAY_jjdoctor i was on gingerbread 2.3.4 before and now i cant get past the cwm recovery screen it just keeps coming up and wont boot into the phone mode , any help wood be appreciated guys on what i have done wrong and hopefully i can rectify it
Can you please tell us in detail the steps you followed and what tools you used?
"I flashed it and it broke" is a bit hard to diagnose
1) I unlocked by bootloader by doing <thing you did>
2) I loaded flashtool and flashed <file X> I found <where'd you get file X>
3) Then I etc etc etc.
Then we can see if you missed a step, or did a step the wrong way around etc.
Cheers,
Tim
sorry lol was in a rush when typing this my bootloader was unlocked with the 2 probe method and wire and loaded the ST18i_Official_4.0.4_Stock_ROM_RAY_jjdoctor into the flashtool and just flashed , i got the file from the forums here i know i prob just done a stupid thing by flashing straight away but could really do with a step by step guide as im a noob at this kind of stuff or directed to a good guide , i also just restored the phone back to stock and its working again thanks to wotan client so i cant try again hopefully getting it right this time
right got it up and running with some messing about i managed to flash the xray kernel first then install the custom rom and works perfect only thing that didnt work was the phone data but will be sorting that out now or if anyone knows or had the same prob give me a hand lol
You have to add a new apn (Access point name) google for your correct provider. Ie Giffgaff apn
Sent from my Xperia Ray using xda premium
Nexttimepleasereadthetutorialsanddoyourownresearchsoyouwon'tgetlostok?
thanks for the help guys everything sorted and working a treat and yes i did read the tutorials but its something new to me doing this so was asking for advice and help isnt that what the forums for if your stuck
andyc240 said:
thanks for the help guys everything sorted and working a treat and yes i did read the tutorials but its something new to me doing this so was asking for advice and help isnt that what the forums for if your stuck
Click to expand...
Click to collapse
I got stuck a lot of times but i haven't asked about it... because I researched...
then when I get stuck, I repeat, get stuck again, revert then look for another process
It always pays to be prepared
Yeah yeah, everyone is new when we start modding their phones... but due to the age(relative) of the thread, there were already exchanges of questions and answers.
I bet you haven't heard or seen the help thread
Here's what I do EVERYTIME I do mods on my phone:
research (what files, how to do it, expected results)
research (fallback methods, including what others have done, read the threads/conversations/posts etc...)
yeah they do take a long time (2 weeks to 1 month)... then...
I executed the processes on my own, and boom! they WORKED
It pays to be prepared...
could you please ask you question at the Q&A thread and not open up a new thread every time you stumble upon a problem where your question may or may not be answered already?
Hi Guys I have Samsung GT-I8552. I am trying to install CWM. But it's just not getting installed. Now the binary update counter is on 18. Pl advise.
I tried Odin3_v3.09 but no luck. Pl help.
Sir,
Please wait until mods will move this thread to the device specific forum.
For reply or more questions please register an account on XDA forums.
Stand by
Good luck
Common scenario after this is flashing Stock ROM, ofc in case if you are having any issues with the recovery or flash got corrupt somehow...
Or, you may have one of the newer devices which seem to be a bit different:
http://forum.xda-developers.com/gra...-i8552-july-2014-series-meeds-update-t2977978
http://forum.xda-developers.com/grand-quattro/help/recovery-grand-quattro-manufactured-t2960032