Hi guys. Im just wondering about the proper way to update cm.
Im on fxp 210 and the latest is fxp11
Question. How cn i update it? Just flash tru cwm?? No wipe needed? No flashing og gapps ??
Wipe cache
Wipe dalvik cache
Install zip
Repeat 1 and 2 don't wipe data
Sent from my Xperia U using Tapatalk 2
Related
Hi Guys,I have got Paranoid Android ROM running on my Galaxy S II my question is,can I flash stock MIUI ICS 2.5.11(newest version) or I have to flash STOCK ICS before flashing MIUI?
Miui direct using cwm.
Don't forget to wipe though
you can flash with complete wipe ...
yes you can
yes you can flash but you need:
wipe data factory
wipe dalvik cahe
wipe cache partitions
I hope this helps you
Hi there! I have been searching in this forum on how to properly install CM based ROms by FXP, here are lots of posts there but of different methods that really bothers me and confuses me. Some says, do not wipe system, other says, make a full wipe first.
My question is, is the installation procedure on installing CM 7.2 the same as installing other custom ROMs such as Spartan and HASA?(Unlocked BL already) st15i
Is it just :
1.) Flash .62 official GB firmware from sony FTF
2.) Flash the provided kernel by FXP for cm 7.2(FXP 130 I guess is the most stable release, according to comments)
3.) boot to recovery and make a full wipe this way:
3.a Wipe data/Factory Reset
3.b Wipe cache/partition
3.c Go to mount/storage and format /system, /data, /cache
3.d Go to Advance and Wipe dalvik cache and Battery stats
4.) FLASH ROM
5.) Reboot
Is this the proper way of installing the ROM? To those who have already installed CM 7.2 there, please help. And also please refer me to the most stable build of cm 7.2 if fxp 130 is not the most stable.
Thanks and more power!
Flash kernel.
Wipe all cache
Flash the rom
Sent from my Xperia Mini Pro using XDA Premium HD app
sandy7 said:
Flash kernel.
Wipe all cache
Flash the rom
Sent from my Xperia Mini Pro using XDA Premium HD app
Click to expand...
Click to collapse
Thank you for answering. Do you mean wipe cache/partition and dalvik cache only? That's all? No need to format system?
Do I need to flash stck .62 first?
bosschona said:
Thank you for answering. Do you mean wipe cache/partition and dalvik cache only? That's all? No need to format system?
Do I need to flash stck .62 first?
Click to expand...
Click to collapse
yes no need to format system...which is told by fxp dev.
Hi guys, you can tell me how to install this rom? http://forum.xda-developers.com/showthread.php?t=2012666
What kernel should I use for better results?
I think like any other rom...
Put it into your sd-card, reboot to CWM and do the wipes(Factory reset, wipe cache, wipe dalvik cache, format system) and the install the .zip
But first of all you should flash the kernel which is given in the download(together with the rom)
AW: [Q] How to install this rom? xD
I think he better should not format system
Just wipe data/factory reset, wipe cache and advanced -> wipe dalvik cache!
Sent from my Nexus 7 running Android 4.2.1
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Any ICS kernel is compatible. I strongly recommend MESA Hybrid v3.5 or LuPuS v3. I also recommend to format system before flashing new ROM. I've done it over 100 times safely. You'll avoid a lot of problems.
malte180684 said:
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Click to expand...
Click to collapse
I think he should first do it without wiping system and incase it was required and he stuck in a bootloop, then he can simply do the process again with wiping system
Press THANKS if I helped,
Regards,
AJ
I tried the rom(with rage kernel 3.2), and always go in bootloop
make sure u already have ur ROM on sdcard and the others (wifi-fix.zip or whatever)
on CMW, u can safely wipe /system when u wanna flash new ROM, but REMEMBER not to reboot your phone AFTER u wipe /system. if u do this, u will see "new boot kernel animation" a.k.a BOOTLOOP.
after wipe /system,/cache,/dalvik,/data,/sd-ext then next thing is install ur ROM.
if u using TWRP, its not necessary to wipe /system bcoz TWRP will wiping /system by itself when u install new ROM.
yes, i sent from my phone using Xda Premium, so what?
Click to expand...
Click to collapse
Is there any difference between flashing CM 10.2 and installing CM 10.2? I wan 2 install 4.4 KitKat ROM. Does tiz mean:
I have to clean all my data n cache 1st. Thn install CM 10.2?
Thn clear data n cache again?
Thn install the Kit Kat ROM n GApps?
Sorry, I am a beginner.
meiyi2 said:
Is there any difference between flashing CM 10.2 and installing CM 10.2? I wan 2 install 4.4 KitKat ROM. Does tiz mean:
I have to clean all my data n cache 1st. Thn install CM 10.2?
Thn clear data n cache again?
Thn install the Kit Kat ROM n GApps?
Sorry, I am a beginner.
Click to expand...
Click to collapse
Yes.
Flashing/installing are same.
Boot into recovery
Wipe cache
Wipe dalvik
Wipe data/factory reset
Format system under mounts&storage
Install cm 10.2 rom
Then go to advance/reboot into recovery
Wipe cache
Wipe dalvik
Wipe data/factory reset
Install kitkat rom
Install 4.4 gapps
Install superuser.zip (if op has provided)
Reboot
Sent from my GT-I9100 using Tapatalk 2
Hi, I am using Redmi Note 3 Pro(Snapdragon). I flashed custom rom by flashing CM14.1 Frimware Kenzo 12.04.2017, Lazy flash tool, RR-N-v5.8.3-20170709-kenzo-Weekly and Gapps. Everything is working file. I got an update to RR-N-v5.8.3-20170716-kenzo-Weekly, downloaded it and tries to flash. Go to twrp recovery and go to wipe then advanced then wipe Dalvik/ART Cache and Cache. Then i install successfully latest ROM. After that, when i reboot my device, it stucks on mi logo and restating. I have changed the bootanimation. Hepl me to go for the latest update.. When I tried to Restore the older version of RR Rom, My device sensors wll not work and i cant hear while i am calling. Plz solve this too..
tomsonmathewv said:
Hi, I am using Redmi Note 3 Pro(Snapdragon). I flashed custom rom by flashing CM14.1 Frimware Kenzo 12.04.2017, Lazy flash tool, RR-N-v5.8.3-20170709-kenzo-Weekly and Gapps. Everything is working file. I got an update to RR-N-v5.8.3-20170716-kenzo-Weekly, downloaded it and tries to flash. Go to twrp recovery and go to wipe then advanced then wipe Dalvik/ART Cache and Cache. Then i install successfully latest ROM. After that, when i reboot my device, it stucks on mi logo and restating. I have changed the bootanimation. Hepl me to go for the latest update.. When I tried to Restore the older version of RR Rom, My device sensors wll not work and i cant hear while i am calling. Plz solve this too..
Click to expand...
Click to collapse
If you can clean flash do that or else wipe system , cache , dalvik cache flash new build n reboot
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
If you can clean flash do that or else wipe system , cache , dalvik cache flash new build n reboot
Click to expand...
Click to collapse
Is there anyway to update without loosing any data? Wipe system and other things will clean my all data and i need to start from the beginning. That was too bad. I hate this process. Tell me how did u flash? or Is there any other way to flash without loosing data?
Just wipe system , cache & dalvik cache you'll not lose any data
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
Also if you wanna mod system like changing bootanimation manually etc you may brick device if you update to latest build
Sent from my Redmi Note 3 using Tapatalk