Okey been trying to figure this out for days. I rooted my infuse with odin. So i have superuser. Now i am trying to install Clockwork recovery and cant get it to work. i am running on gingerbread.uclb3,firmware 2.3.6. I am using the rom manager and root explorer to install the recovery file into system/bin folder and its not working. I always get this....
installing package....
finding update package....
opening update package....
verifying update package
E:failed to verify whole -file signature
E:signature verification failed
installation aborted
I did everything step by step. One thing that was odd to me is when i placed the recovery file into the system/bin folder, there wasn't a original recovery file there. Does this mean it boots up from a different folder?
i am pretty retarted at this so plz if anybody can explain this because i see many people have problems with the same thing.
Related
everytime i run the RUU program it gets almost through then an error pops up and says
error 130 model ID incorrect.
ive followed this guide to downgrading and doesnt seem to be working
http://theunlockr.com/2009/10/18/how-to-downgrade-your-htc-hero-so-it-can-be-rooted/
any help would be greatly appreciated
When does that come up? Is it the goldcard method your using? Did you check if your goldcard had worked?.... Use BTDAGs guide linked in my signature.
ok so it got past the goldcard and worked from there.. went thru the root procedure and got to the custom ROM. started to load villainROM and installation aborted.
this is what i see
install from sdcard...
finding update package...
opening update package...
E:can't open /sdcard/villainROM10.2-Full-signed.zip
(bad)
Installation aborted.
silver2kgti said:
ok so it got past the goldcard and worked from there.. went thru the root procedure and got to the custom ROM. started to load villainROM and installation aborted.
this is what i see
install from sdcard...
finding update package...
opening update package...
E:can't open /sdcard/villainROM10.2-Full-signed.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
Probably just a bad download. Do it again
did it again... same thing. when i went to wipe the sd:ext partition i get
error : Run 'wipe ext' via adb.
WTF!? should i find another ROM? or is there an underlying problem?
New su.zip. Just changed updater-script and update binary to work with mount.wrapper we are using on our custom kernels. Will work from stock phone as well. Script is edify but will work with cwm2.5 as well.
Directions
Download su-2.3.6.1.x.zip and place on your sdcard.
Odin cwm if you do not have it.
Boot into cwm recovery.
Flash zip
Reboot
Profit
Fantastic and easy!
Stellar! Thank you Nemesis, very handy to have atm.
Nemesis2all - worked perfectly.. Thanks man for this and the help in IRC..
Murd0ck
How would I install this on a stock phone?
DirgeExtinction said:
How would I install this on a stock phone?
Click to expand...
Click to collapse
By following directions. Place zip on sdcard, odin cwm recovery, boot to cwm recovery, flash zip in cwm recovery.
nemesis2all said:
By following directions. Place zip on sdcard, odin cwm recovery, boot to cwm recovery, flash zip in cwm recovery.
Click to expand...
Click to collapse
I finally got it. Thanks for this new su.
I must be blind
Can someone point me to an Odin package for CWM3? or is 2.5 all I can use? want to flash this after OTAu. Thanks.
xvoorheesx said:
Can someone point me to an Odin package for CWM3? or is 2.5 all I can use? want to flash this after OTAu. Thanks.
Click to expand...
Click to collapse
As far as I know there is no ODIN package for CWM3. I have seen instructions in other threads on how to get it through rom manager, but I am drawing a blank at which specific thread.
nemesis2all said:
New su.zip. Just changed updater-script and update binary to work with mount.wrapper we are using on our custom kernels. Will work from stock phone as well. Script is edify but will work with cwm2.5 as well.
Directions
Download su-2.3.6.1.x.zip and place on your sdcard.
Odin cwm if you do not have it.
Boot into cwm recovery.
Flash zip
Reboot
Profit
Click to expand...
Click to collapse
So I did all the above and then when I try to boot in recovery using CWM I get the below message...
-- Install from package...
Finding update package...
Opening update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
It brings me back to the blue recovery screen.
jimmy2179428 said:
So I did all the above and then when I try to boot in recovery using CWM I get the below message...
-- Install from package...
Finding update package...
Opening update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
It brings me back to the blue recovery screen.
Click to expand...
Click to collapse
Odin cwm 3-30 fix all with battery pulled
After odin is completed insert battery and give phone three finger salute to make it cwm.
Flash su zip I provided above.
jimmy2179428 said:
So I did all the above and then when I try to boot in recovery using CWM I get the below message...
-- Install from package...
Finding update package...
Opening update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
It brings me back to the blue recovery screen.
Click to expand...
Click to collapse
nem's post above this one is exactly correct on how to fix the problem, but in case you (or others reading this) aren't clear as to the WHY...
It's the "blue recovery screen" above. Stock recovery is blue. It requires signatures and non-test keys, and is therefore useless for us. Our standard Clockwork is red, and is what you Odin in with the 3-30 package. This is what you want, and need to put on the phone before anything else. There's also orange, which ROM Manager installs -- it's still buggy, so don't flash it.
If im not being lazy later today i'll go ahead and create an odin package for the latest CWM 3.x with voodoo options.
Sent from my SCH-I500 using XDA App
Originally Posted by jimmy2179428
So I did all the above and then when I try to boot in recovery using CWM I get the below message...
-- Install from package...
Finding update package...
Opening update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
It brings me back to the blue recovery screen.
had the same thing happen to me,all i did was odin cwr again and it worked
If anyone wants to take the time and use the settings I changed for mounting system and create a signed zip to alleviate issues people have on stock recovery feel free to do so. If not I might get around to it Monday. I am not sure if the mount options will work on stock recovery tho so please make sure you test before hand. I suppose sometimes I think for the most part almost everyone will be using a custom kernel or cwm. Sorry that when I did the zip I didn't take into account all possible situations.
I cannot get busy box to stick. Any ideas?
Bump.
10chars
xvoorheesx said:
Can someone point me to an Odin package for CWM3? or is 2.5 all I can use? want to flash this after OTAu. Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1046905
(yeah I know this is old news, but the thread might as well have this link)
joe_knowitall said:
I cannot get busy box to stick. Any ideas?
Click to expand...
Click to collapse
Rumor is stock rom our kernel wipes root. Stock kernel definitely wipes CWM, but there is a patched stock kernel here on XDA.
If you are desperate, you could try doing it manually?
http://forum.xda-developers.com/showthread.php?t=1045615
joe_knowitall said:
I cannot get busy box to stick. Any ideas?
Click to expand...
Click to collapse
I'm currently on stock ED03 and I was only able to get busybox to stick by using adb to push busybox to /system/xbin while in CWM 3.x. I forgot the link, but there was a download that had the rage.bin, Superuser.apk, su and busybox files with the instructions to manually root. I ignored all that.. used this Superuser zip in CWM and pushed busybox manually.
So I'm trying to use ROM Manager to flash ROM's onto my Galaxy S 2. Tried to boot the phone into recovery mode using the ROM Manager and I get the message:
-- Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
After doing some reading, some mentioned trying to completely uninstall ROM Manager and reinstalling it. Tried that and got the same thing.
Android Version: 2.3.3
Kernel: 2.6.35.7-I9100JPGK20CL342890root at DELL104 #2
Build Number: GINGERBREAD.UGKG2
Anyone got any ideas?
there are plenty of instructions of how to do it in the developers section..
http://forum.xda-developers.com/showthread.php?t=1103399
then flash your desired ROM via Clockword Mod
Edit: it does mention incompatability with Rom Manager.. so flash the ROM you want from CWM (enter CWM by pressing Up on the Volume Key/Power Button/Home key on boot..
If you have already copied your ROM to the SD then go to "install ZIP from SD card", "choose ZIP from SD card" .. then choose the ZIP file of the ROM you want to install and it SHOULD work..
Do Not Use Rom Manager on the SGS2!
You can turn off signature verification, but I suggest downloading your rom again from where you got it and flash it by firstly getting into CWM as described above.
@OP- Signature related error due to unavailable of the Zimage from your rooted kernel. So flash the Zimage from your rooted kernel via CWM.
Regards.
Hi there,
recently got my S2 and was looking to put the Cyanogen mod on it. I found the thread to install it but when I get to "step 2, reboot your phone to get into recovery"
I get the text
ClockworkMod Recovery v4.0.0.2
Finding update package...
Opening update package...
Verifying update package...
E:failed to veriy whole-file signature
E:signature verification failed
Installation aborted.
Any ideas whats wrong? I googled it and found...
The famous ROM Manager that is usually used to install ClockworkMod Recovery tool is not compatible with the updated Galaxy S due to new kernel Recovery 3e that needs signature verification for flashing external files.
The solution is to replace the kernel based on Recovery 2e that permits installing unverified signature files. Thanks to developer of XDA ‘Chainfire’ who has come up with working tools that lets you install ClockworkMod Recovery on the Samsung Galaxy S I9000 running the Android 2.3.3 Gingerbread (XXJVK) ROM.
Link to this example is: http://www.dkszone.net/install-clockworkmod-recovery-on-samsung-galaxy-s-running-android-2.3.3-gingerbread-xxjvk
Anyone know if this is the ONLY way to install CWM properly or is there another fix?
Signature related error appears when you haven't flashed the zImage of your rooted kernel via CWM. Flash it and it will disappear.
Regards.
how would I accomplish this? I flashed my ROM at the moment by using Odin tools
Your rom lite-ning rom 6.1 should have the proper cwm built in, sounds almost impossible that you're getting this error. Are you booting into cwm through rom manager? Or with Vol up+home+power?
I was trying both methods to get into CWM and got these errors everytime.
Hi Guys,
Need a bit of help here.
I bought the clockworkmod touch yesterday, I flashed it, but when I went into recovery it wasn't touch, so I wiped cache, dalvik cache etc...and then isntalled the update.zip to no avail it said "E: failed to verify whole-signature", I tweeted @clockworkmod, and he said it was because I was using SpeedMod Kernel.
So I moved over to Siyah kernel, installed that fine and restored my data/cache using CWM when it booted. I then try to flash ClockworkMod Touch through ROM Manager, the green bar fills, and then says "Succesfully downloaded ClockworkMod recovery!"
I click ok, and then go to "reboot into recovery" I'm presented with red text that says:
E:missing bitmap password_highlight (code-1),
E: missing bitmap password_confirm_45 (code-1),
E: Missing Bitmap password_retry_45 (code-1)..."
I'm then presented with:
Installing Package...
Opening Update Package
Verifying Update Package...
E:Failed to verify whole-file signature
E:Signature Verification failed.
Installation aborted
I've then gone into three button method, and tried to apply, /sdcard/update.zip and it comes up:
Finding update package
Opening update package
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
I'm running the following setup:
Model:GT-I9100
Android: 2.3.5
Baseband version: I9100XXK14
Kernel Version: [email protected] #294
Build number: Gingerbread.XWKJ1
I would like it if I could get this fixed without using Odin, as i'm at work most of the time and because of some stupid drive encrytion I can't put my phone in without encrypting it, BSkyB's rules apparently. I have tomorrow off, so I can if neccesary boot my laptop up and fiddle with odin.
Just wanna get this sorted, I purchased this and wanna use it.
Any help is much appreciated.
You have to wait until devs add this to their kernels/ roms
Sent from my sgs2 running cm9 using xda app
Is there no kernel that can support it?
I actually don't really care which kernel I use, aslong as it 's Stock rom for now, then I may look at new 4.0 roms/kernels when they've been out a good few more months, and when obviously clockwork mod touch is more commonly added to kernels/roms.
A guess its Rom Manager as SGS2 does not like it .
As this is an app their is a thread in the applications section .
jje
richfreestone said:
Hi Guys,
Need a bit of help here.
I bought the clockworkmod touch yesterday, I flashed it, but when I went into recovery it wasn't touch, so I wiped cache, dalvik cache etc...and then isntalled the update.zip to no avail it said "E: failed to verify whole-signature", I tweeted @clockworkmod, and he said it was because I was using SpeedMod Kernel.
So I moved over to Siyah kernel, installed that fine and restored my data/cache using CWM when it booted. I then try to flash ClockworkMod Touch through ROM Manager, the green bar fills, and then says "Succesfully downloaded ClockworkMod recovery!"
I click ok, and then go to "reboot into recovery" I'm presented with red text that says:
E:missing bitmap password_highlight (code-1),
E: missing bitmap password_confirm_45 (code-1),
E: Missing Bitmap password_retry_45 (code-1)..."
I'm then presented with:
Installing Package...
Opening Update Package
Verifying Update Package...
E:Failed to verify whole-file signature
E:Signature Verification failed.
Installation aborted
I've then gone into three button method, and tried to apply, /sdcard/update.zip and it comes up:
Finding update package
Opening update package
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
I'm running the following setup:
Model:GT-I9100
Android: 2.3.5
Baseband version: I9100XXK14
Kernel Version: [email protected] #294
Build number: Gingerbread.XWKJ1
I would like it if I could get this fixed without using Odin, as i'm at work most of the time and because of some stupid drive encrytion I can't put my phone in without encrypting it, BSkyB's rules apparently. I have tomorrow off, so I can if neccesary boot my laptop up and fiddle with odin.
Just wanna get this sorted, I purchased this and wanna use it.
Any help is much appreciated.
Click to expand...
Click to collapse
I am also waiting for a fix for your problem, I was about do the same steps you have done, to install the CWM touch from my SGS2, my kernel vesrion is Siyah-V2.6.12 instead.
lets wait for a solution,