I put a stock sammobile I9100 xwlse 4.1.2 jelly bean rom on my Galaxy s2 worked fine for 2 days now I have problems charging the phone saying after half an hour its charged when its not also windows 7 will not reconise the device anymore tried factory reset still no joy even when I unplug the charger or plug it in its go's slower to start charging or stop chargeing its annouying the hell out of me tried on windows to uninstall the drivers and reintsall to no avail any ideas
Ok first of all, punctuation - use it.
About the battery problem, it seems like it's out of "sync", you should let it from exactly 0 to exactly 100. That should fix it.
About the not recognizing, have you tried different USB port on the PC? Tried on another PC? Tried with another phone? Tried with a different USB cable?
You have many options, now go try them.
Kaldsud said:
Ok first of all, punctuation - use it.
About the battery problem, it seems like it's out of "sync", you should let it from exactly 0 to exactly 100. That should fix it.
About the not recognizing, have you tried different USB port on the PC? Tried on another PC? Tried with another phone? Tried with a different USB cable?
You have many options, now go try them.
Click to expand...
Click to collapse
I am having a similar issue, when I plug my phone into a windows PC through USB the MTP driver is buggy, have to reconnect and change to media device a few times until it installs, and then the issue afterwards will be the phone will seem as if it is being plugged and unplugged multiple times after its been disconnected (usually when I have media player running too) ... this issue was non-existant before the software update so I'm sure its gotta be an issue.
comas & latest kies.
Sent from the little guy
Tried what you said and no luck tried draining battery and recharging but still saying fully charged when its not also tried to conect to a diffrent computer still no luck there either and I did try a diffrent usb lead and still the computers say device not supported anything else to try
Genuine s2 cable?
Sent from the little guy
$2500 donlopr
yep its only started these problems since I put jell bean update on would like to go bak to ice cream sandwich but till I get my device to be reconise I am stuck
boro1876 said:
yep its only started these problems since I put jell bean update on would like to go bak to ice cream sandwich but till I get my device to be reconise I am stuck
Click to expand...
Click to collapse
The thing is that it doesn't make any sense
You are not rooted are you?
Your usb flex must be dusty/busted.
Nope not rooted tried uninstalling drivers and reinstalling even tried Keis not a thing I get error code 43 on my pc even though the drivers are there it says usb device not reconised so for some reason which is doing my head in I cannot get it to connect with my pc on windows 7 also tried it on another computer with XP on and get the same problem tried driffrent usb ports and usb leads as well
Error 43 is a start.
Disable the antivirus and don't install the drivers, install kies.
Try a laptop.
Sent from the little guy
Tried my galaxy 2 again tonight after I replaced the battery I suspected may have been faulty ie not holding its charge and low and behold it is also connecting fine to the pc now I do not know if this is related it could be but as of now for some reason I am puzzled its now working on my pc thanks for your help in trying to solve this problem will alway pop here from time to time to read about any problems I may get and for updates once again thanks for your help it great having a site like these for help:laugh::good:
batteries are evil, saw that? I put a coma there.
Glad it all worked out for you.
Sent from the little guy
Related
Hi all,
All up until a few days ago, my computer/s cannot recognise my Samsung Galaxy S2. Whenever I connect my phone to my computer, the phone believes I am plugging in the charger.
I have attempted to turn on/off USB debugger, attempted the USB mass storage connection method and also attempted to use Winamp's automount option.
I thought it could have been my cable and I have tried different cables and phones and it seems my phone is the only problematic one.
Before this issue, usb used to connect very easily, even used for my car headunit.
Yesterday I was running the 2.3.6 firmware and recently changed to 4.0.3 and neither allow the usb to be working.
Has anyone encountered this problem and does anyone have a solution for this problem?
nounderscore said:
Hi all,
Yesterday I was running the 2.3.6 firmware and recently changed to 4.0.3 and neither allow the usb to be working.
Has anyone encountered this problem and does anyone have a solution for this problem?
Click to expand...
Click to collapse
Did the USB work on previous firmware if so you have messed up the install revert to older stock rom firmware and test .
jje
It didnt stop working due to a firmware upgrade. It randomly stopped working when I was using 2.3.6 so i thought maybe upgrading would do the trick, which it did not.
Try doing a factory reset..
Yeah, did a factory reset when I changed from 2.3.6 to 4.0.3 and just tried again. No difference.
I did notice that this error may have occurred when I may have dropped the phone. Not too sure how this would affect anything but just putting it out there.
Did you drop it with the usb connected?
Sounds like its a hardware problem, just try flashing stock again to be 100%
Sent from my GT-I9100 using XDA App
Dropped whilst drunk unconnected to anything, did have a case on it however.
nounderscore said:
It didnt stop working due to a firmware upgrade. It randomly stopped working when I was using 2.3.6 so i thought maybe upgrading would do the trick, which it did not.
Click to expand...
Click to collapse
ICS is not an upgrade its an unstable beta rom not passed by Samsung for use .
Possible dirty USB ports .
jje
How would one proceed with cleaning the usb ports?
In the past I happened to have trouble connecting with the usb port and I solved unistalling and reinstalling Kies. Have you already tried?
I believe what I'm attempting to do is to even use the phone as a mass storage device. I used to be able to do this via straight windows to any computer and even my car headunit. However at the moment a cable is only recognised as a power source and not as a data connection.
http://forum.xda-developers.com/showthread.php?t=438400
just gave this a go, going to leave it overnight to dry. wish me luck
No luck but I have concluded that the USB port possibly could be broken. I'm wondering, does rooting the phone void warranty?
Unfortunatelly it does...
Wipe everything U can, flash back original firmware and do reset with factory JIG... Than U have chance to claim warranty. But its not 100%...
There is thred about reverting somewhere...
Sent from my GT-I9100 using XDA App
Try again but after restarting ur computer !
Does the computer see any external drives (whether you can connect to them or not)?
Does the computer make a noise when you connect or disconnect the phone?
Ok so I was previously running Hydr0g3n ICS ROM an older version and I had mount problems where only internal sd would mount, but it mounted at least. Occasionally I'd have to reboot my laptop because of no detection but that'd fix it.
Fast forward to a couple of days ago and I installed Resurrection Remix 04/05 but got really weird issues when connecting to my laptop e.g. installing device drivers, failing, usb sounds coming and going, device being recognised then disappearing again. Eventually no response. I reflashed, fully wiped, everything, experimented with drivers. Then plugged it into a mates (newer) laptop and it worked?
Back to mine, didn't work, installed Hydr0g3n ICS 05/05 which ran a lot smoother but still same issues, I repeated the steps above and even after device drivers actually successfully installed, it'd work and then next day no response or detection when plugging in USB. Since then I've gone through the drivers route again, trying all sorts of windows fixes, it still works fine when plugged into a newer laptop.
So after all my research etc I've realised that it seems to be some sort of power issue with the phone/ROM, perhaps the newer laptops have more USB hubs which aren't shared between many devices and so it works but mine is very intermittent if not non-existent. Oh, all other USB devices work, flash drives, external hard drives, I have never had any issues with any USB devices. Just this.
Also, I've tried toggling USB Debugging, and MTP UMS PTP, nothing. Read something about fast charge but have no notification that it's enabled on boot and no option to disable it in Kernel tweaks since I'm not on a supported kernel.
Hydr0g3n ICS ROM 2012 05 05 SGS2
3.0.29 Siyah v3.1.2
Any help would be much appreciated.
UPDATE:
I ordered a powered USB hub off eBay, it arrived today and did not work with the phone.
UPDATE 2:
So I recently stole my dads TouchPad and installed AOKP on it, my laptop detected it absolutely fine in MTP mode.
It uses the same cable so I figured, why not?
I plugged it in and hey presto, it popped up -_-
It's so strange the stock cable works on everyone elses laptops but mine, I don't know if it'll still work tomorrow though, I suppose if I don't re-comment then it still is working.
Bump?
FatPhysicsBoy said:
Ok so I was previously running Hydr0g3n ICS ROM an older version and I had mount problems where only internal sd would mount, but it mounted at least. Occasionally I'd have to reboot my laptop because of no detection but that'd fix it.
Fast forward to a couple of days ago and I installed Resurrection Remix 04/05 but got really weird issues when connecting to my laptop e.g. installing device drivers, failing, usb sounds coming and going, device being recognised then disappearing again. Eventually no response. I reflashed, fully wiped, everything, experimented with drivers. Then plugged it into a mates (newer) laptop and it worked?
Back to mine, didn't work, installed Hydr0g3n ICS 05/05 which ran a lot smoother but still same issues, I repeated the steps above and even after device drivers actually successfully installed, it'd work and then next day no response or detection when plugging in USB. Since then I've gone through the drivers route again, trying all sorts of windows fixes, it still works fine when plugged into a newer laptop.
So after all my research etc I've realised that it seems to be some sort of power issue with the phone/ROM, perhaps the newer laptops have more USB hubs which aren't shared between many devices and so it works but mine is very intermittent if not non-existent. Oh, all other USB devices work, flash drives, external hard drives, I have never had any issues with any USB devices. Just this.
Also, I've tried toggling USB Debugging, and MTP UMS PTP, nothing. Read something about fast charge but have no notification that it's enabled on boot and no option to disable it in Kernel tweaks since I'm not on a supported kernel.
Hydr0g3n ICS ROM 2012 05 05 SGS2
3.0.29 Siyah v3.1.2
Any help would be much appreciated.
Click to expand...
Click to collapse
just try 2 flash the latest siyah kernel and check
On Windows 7, after several USB connect-disconnect, I would experience Windows not responding to connection any more on that very USB port.
I usually have adb server running in background, so "Safely remove" feature is blocked, and I would simply remove after file operations are over.
I made a .bat file on desktop, that simply performs "adb kill-server", so that I can safely remove it, and have not experienced this problem since then.
Sun90 said:
just try 2 flash the latest siyah kernel and check
Click to expand...
Click to collapse
I've tried all of the kernels, Siyah, Thoravukk, NEAK, and multiple versions of Siyah too, including the latest one.
Also my powered USB hub arrived today and it did not remedy the issue.
mirbeksm said:
On Windows 7, after several USB connect-disconnect, I would experience Windows not responding to connection any more on that very USB port.
I usually have adb server running in background, so "Safely remove" feature is blocked, and I would simply remove after file operations are over.
I made a .bat file on desktop, that simply performs "adb kill-server", so that I can safely remove it, and have not experienced this problem since then.
Click to expand...
Click to collapse
Could you perhaps explain this a little more to me?
I plug it in and literally it charges but absolutely nothing else happens. Anything else works in the same port, just not the phone for some reason.
USB problems basics .
USB port should be mainboard port .
Usb Port on phone multiple USB problem posts say clean port .
Kies or Samsung USB drivers should be installed with Kies not running .
USB cable try Samsung cable or another .
Try USB debugging off and or on .
jje
JJEgan said:
USB problems basics .
USB port should be mainboard port .
Usb Port on phone multiple USB problem posts say clean port .
Kies or Samsung USB drivers should be installed with Kies not running .
USB cable try Samsung cable or another .
Try USB debugging off and or on .
jje
Click to expand...
Click to collapse
1) Yes they are all mainboard ports - No response.
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
3) Have also experimented with combinations of this. (All combinations) Nothing.
4) I have only tried the Samsung cable since it's all I have, and it works on all of my friends laptops.
Also, I plug it in, and it draws power (aka it charges) but nothing else. Not even a windows 'bong'. Even with the powered USB hub, it still only charges.
However the minute I plug it into a friends laptop it seems to work just fine.
@ op
goto device manager and uninstall the android devices you see there with the option "delete device drivers completely" and make a reboot.
now install the usb drivers and plug in the device.
FatPhysicsBoy said:
1) Yes they are all mainboard ports - No response.
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
3) Have also experimented with combinations of this. (All combinations) Nothing.
4) I have only tried the Samsung cable since it's all I have, and it works on all of my friends laptops.
Also, I plug it in, and it draws power (aka it charges) but nothing else. Not even a windows 'bong'. Even with the powered USB hub, it still only charges.
However the minute I plug it into a friends laptop it seems to work just fine.
Click to expand...
Click to collapse
This last point tells me there are possibly some registry settings on your computer that are keeping the drivers from loading properly.
I've never had to do this, so I don't know what to look for EXACTLY, but you may need to get a registry cleaner and try to eradicate all traces of Kies and Samsung drivers from your computer, then re-install either Kies (to get the drivers) or the stand-alone USB drivers.
I remember reading another post some time back about some other guy who actually totally re-installed Windows... which is a bit like using explosives to kill a mosquito, if you ask me.
However, try bala_gamer's suggestion first. That may be all that is needed.
FatPhysicsBoy said:
1)
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
NO its the phone USB port .
Agree that if all fails try reinstall of Kies and drivers after a delete .
Delete registry kies .
[HKEY_CURRENT_USER\Software\Samsung]
[HKEY_LOCAL_MACHINE\SOFTWARE\SAMSUNG]
jje
Click to expand...
Click to collapse
bala_gamer said:
@ op
goto device manager and uninstall the android devices you see there with the option "delete device drivers completely" and make a reboot.
now install the usb drivers and plug in the device.
Click to expand...
Click to collapse
So believe it or not I didn't actually go into detail in the op! But a few more things to note are that the device does not show up in device manager at all. Even with shadow device detection enabled. I have used all manner of driver software available to clear out all old usb drivers/any drivers which may be conflicting etc. I have also removed and reinstalled the usb host controllers and root hubs many times
ctomgee said:
This last point tells me there are possibly some registry settings on your computer that are keeping the drivers from loading properly.
I've never had to do this, so I don't know what to look for EXACTLY, but you may need to get a registry cleaner and try to eradicate all traces of Kies and Samsung drivers from your computer, then re-install either Kies (to get the drivers) or the stand-alone USB drivers.
I remember reading another post some time back about some other guy who actually totally re-installed Windows... which is a bit like using explosives to kill a mosquito, if you ask me.
However, try bala_gamer's suggestion first. That may be all that is needed.
Click to expand...
Click to collapse
Yes, indeed I also believed it to be some sort of registry problem, I have also used tune up utlities, registry mechanic and ccleaner (I think thats all there was!) and run registry scans/cleans/fixes/defrags. To no avail. I was actually considering reinstalling windows or something.
JJEgan said:
FatPhysicsBoy said:
1)
2) Have cleaned USB ports on mainboard many times. This seems irrelevant too since all other devices are recognized.
NO its the phone USB port .
Agree that if all fails try reinstall of Kies and drivers after a delete .
Delete registry kies .
[HKEY_CURRENT_USER\Software\Samsung]
[HKEY_LOCAL_MACHINE\SOFTWARE\SAMSUNG]
jje
Click to expand...
Click to collapse
Yes, my bad, I have also cleaned that too. Also I didn't think it could be that since it seems to work on everyone elses laptop.
Just deleted those registry entries, rebooted. Nothing. Deleted a few more from old software which seemed to still be floating around, rebooted. Nothing.
:'(
Click to expand...
Click to collapse
I had the same problem with AOKP ROMs
I had the same problem with AOKP ROMs and then I installed MIUI and it worked again, I guess you can try any other ROM (not AOKP) and check if it solves your problem.
So I recently stole my dads TouchPad and installed AOKP on it, my laptop detected it absolutely fine in MTP mode.
It uses the same cable so I figured, why not?
I plugged it in and hey presto, it popped up -_-
It's so strange the stock cable works on everyone elses laptops but mine, I don't know if it'll still work tomorrow though, I suppose if I don't re-comment then it still is working.
Hi,
I have a galaxy s II i bought about 8 months ago in germany, It worked great with 0 issues, ive moved sevrel roms and never had a single issue.
last week I updated to the JB preview CM10, MTP worked fine when I connected it to my PC and I had no issues other then the occasional reset.
anyway, this Friday I was using it as a modem, USB tethering, when suddenly it stopped working, I unplugged it, tried another port and I get unknown USB device, I thought maybe it was just a temp issue, but I reset, re-installed drivers, and still nothing, my PC runs windows 7 64 bit, I tried at work with multiple cables and windows xp on multiple PC's, also tried ubuntu, nothing...
I tried that USB code thing i think its *#2738# something like that to switch between modem mode to USB and still nothing...
weird thing is it charges fine, the connection seems to be good and its not loose... im starting to think it got static or something cuz in my days as a PC tech I saw this happen many times with USB Flash drives, the contacts would get static and they would go...
any ideas?
P.S I tried re-installing kies, and nothing...
any help would be great! thanks!
sooti said:
Hi,
I have a galaxy s II i bought about 8 months ago in germany, It worked great with 0 issues, ive moved sevrel roms and never had a single issue.
last week I updated to the JB preview CM10, MTP worked fine when I connected it to my PC and I had no issues other then the occasional reset.
anyway, this Friday I was using it as a modem, USB tethering, when suddenly it stopped working, I unplugged it, tried another port and I get unknown USB device, I thought maybe it was just a temp issue, but I reset, re-installed drivers, and still nothing, my PC runs windows 7 64 bit, I tried at work with multiple cables and windows xp on multiple PC's, also tried ubuntu, nothing...
I tried that USB code thing i think its *#2738# something like that to switch between modem mode to USB and still nothing...
weird thing is it charges fine, the connection seems to be good and its not loose... im starting to think it got static or something cuz in my days as a PC tech I saw this happen many times with USB Flash drives, the contacts would get static and they would go...
any ideas?
P.S I tried re-installing kies, and nothing...
any help would be great! thanks!
Click to expand...
Click to collapse
I would try on another PC first. If it works, the phone is fine so far and there is something wrong with the PC.
I have same problem. I almost tried everything (uninstall and reinstall usb drivers and kies, uncheck usb debug, different pc or cable, reinstalled firmware...) but none of them worked
shaq1907 said:
I have same problem. I almost tried everything (uninstall and reinstall usb drivers and kies, uncheck usb debug, different pc or cable, reinstalled firmware...) but none of them worked
Click to expand...
Click to collapse
tried 4 def PC's, with windows XP. 7, ubuntu 8, ubuntu 10.10... nothing.
tried cleaning the contacts, still nothing, charges fine but no USB
hello guys ! 1st: try to connect the phone into a computer with kies installed (last version prefered ) 2nd , you will see in the right part of the screen : Instaling Drivers , wait for the instalation and after this will be show a window with autorun GT i9100 !
How bout trying a different usb cable..
1: Try Different Pc
2: Try Different Usb Port
3: Try Different Usb Cable
4: Uninstall kies and all othe pc suites and also drivers reboot and install these drivers and check if it connects
DRIVERS
If these dosin resolve then i dobt its a prob with with ur Motherboard or the Usb port
Put your phone into download mode.. Flash a official ROM by using Odin..
Sent from my GT-I9100 using xda app-developers app
I've tried all the above suggestions, 4 cables, 4 PC's, 4 OS's, Uninstalling and reinstalling on varoius computers (drivers and kies), samsung codes on the phone to switch from pda to modem and back to pda, flashing stock rom, formatting all cache and data... Im looking if there is some advance trick im missing, I think we can all agree that this is not an external factor like cable or computer, its like my data contacts on the socket are dead and only the charging is working.... has anyone ever heard of this? or maybe there is something on the phone that I can flash that i havent that doesnt get flashed during wipe, stock format?
the annoying thing is this phone was bought in germany and i live in israel and there is no warrenty here, it means I have to wait for someone to go there to fix it...
I mean for now I can copy stuff using a micro-sd adapter but its super annoying!
if anyone has an advanced trick that worked for them it would be amazing! if not ill just have to accept my fate
...
sooti said:
I've tried all the above suggestions, 4 cables, 4 PC's, 4 OS's, Uninstalling and reinstalling on varoius computers (drivers and kies), samsung codes on the phone to switch from pda to modem and back to pda, flashing stock rom, formatting all cache and data... Im looking if there is some advance trick im missing, I think we can all agree that this is not an external factor like cable or computer, its like my data contacts on the socket are dead and only the charging is working.... has anyone ever heard of this? or maybe there is something on the phone that I can flash that i havent that doesnt get flashed during wipe, stock format?
the annoying thing is this phone was bought in germany and i live in israel and there is no warrenty here, it means I have to wait for someone to go there to fix it...
I mean for now I can copy stuff using a micro-sd adapter but its super annoying!
if anyone has an advanced trick that worked for them it would be amazing! if not ill just have to accept my fate
Click to expand...
Click to collapse
then it can b a hardware issue .. either usb port issue or a motherboard issue
u can try changin ur usb port ... u can order 1 from ebay and fix it urself ..
I've had the same issue but because of water damage
on another note, Try cleaning your port with a soft tooth brush.
YES!!!
Fixed it! it was so stupid yet no way of knowing,
so i almost ordered the flex cable but said I'd clean the inside first to make sure its not the issue, I opened the back case and while cleaning I noticed a ribben was loose, lol, i just popped it back into place and walla, worked like new!
thanks for all your help, my phone is back to working great
sooti said:
YES!!!
Fixed it! it was so stupid yet no way of knowing,
so i almost ordered the flex cable but said I'd clean the inside first to make sure its not the issue, I opened the back case and while cleaning I noticed a ribben was loose, lol, i just popped it back into place and walla, worked like new!
thanks for all your help, my phone is back to working great
Click to expand...
Click to collapse
lol
glad it works now
Hi everyone, sorry I have read and tried so many different things on this forum I'm in need of more advanced help... someone that can spare a little time... (I burned out the mother board in my vibrant, got a new one out of another vibrant that was working) it is on Froyo v2.2 android no root... cant get it to connect to the computer says "new device not recognized" goes into installing and everything fails... I have my own USB ports downloaded I have installed both 64bit and 32bit... I'm on Windows 7 home premium 64bit OS I have uninstalled and reinstalled several times and tried to let windows update install the driver... can someone else help me with this I would like to odin back to stock.. Thanks and hope to hear back soon!
PS
i have been flashing roms on my phone since 2010 i somewhat know what im doing but never had this problem occur before...
Hi,
Hope you have the correct drivers installed. Please check another USB cable and/or different port if possible
tc
haarsh said:
Hi,
Hope you have the correct drivers installed. Please check another USB cable and/or different port if possible
tc
Click to expand...
Click to collapse
I have the correct drivers... i finally got it into download mode and connected to computer... but this didn't solve my deli-ma... now it keeps hanging on modem and factoryffs....is there a way to fix this?or work around this...?
Btw i have tried 5 differnt odins, one click java file, and heimdal nothing is freaking working all just keeps freezing up... and i have redownloaded all my files so many times that i might lose my mind if i have too again....
MysticAoh said:
I have my own USB ports downloaded
Click to expand...
Click to collapse
Just to clarify, a usb port is the slot on your pc that you actually plug your usb cable into. Usb drivers are what you downloaded.Try running odin as administrator and use a different usb port on your pc. Odin can be tricky sometimes, give it a couple more tries.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Just to clarify, a usb port is the slot on your pc that you actually plug your usb cable into. Usb drivers are what you downloaded.Try running odin as administrator and use a different usb port on your pc. Odin can be tricky sometimes, give it a couple more tries.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
lmao ic ic but i have reinstalled both drivers work all good it connects inless i switch usb ports... the ports (i reinstalled them today) along with the drivers... i can get almost 90% of the flash done... it is freezing at the end of FactoryFS the last little quarter freezes up and makes my phone screen change colors... i have seen all the colors i think now... blue, yellow, red, green, purple, grey, and pixeled
MysticAoh said:
I have the correct drivers... i finally got it into download mode and connected to computer... but this didn't solve my deli-ma... now it keeps hanging on modem and factoryffs....is there a way to fix this?or work around this...?
Btw i have tried 5 differnt odins, one click java file, and heimdal nothing is freaking working all just keeps freezing up... and i have redownloaded all my files so many times that i might lose my mind if i have too again....
Click to expand...
Click to collapse
try running ODIN as an administrator if u r using windows 7
thread that I found : http://forum.xda-developers.com/showthread.php?t=798020
Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying: