Related
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Sill4nt said:
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Click to expand...
Click to collapse
tried with reflash partition (pit) should help it boot again, or go into recovery mode and wipe factory/data
Sill4nt said:
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Click to expand...
Click to collapse
Which firmware you flashed through ODIN?
Sent from my GT-I9100 using Tapatalk 2
if your experiencing a boot loop after flashing go into recovery and wipe data see if that helps
Sent from my GT-I9300 using xda premium
post issues in the Q&A section not general
or read this bootloop thread
forum.xda-developers.com/showthread.php?t=1108499
bootloop happens when the Rom corrupts during installation or installing any other application. or some people using ROM Manager . Never use ROM Manager you will loose the cwm. Download any ROM which supports Odin. flash it you should be fine. Then you can switch back to your favorite ROM. this is a good rom you can flash via odin.
http://forum.xda-developers.com/showthread.php?t=1095274
PS : if you don't like to flash ROM just flash CWM via Odin which should give you access to CWM. you can restore you backup ROM if you have one or have any other ROM in your phone memory.
Sill4nt said:
Hello, I have bricked my Galaxy S2 and I can enter the Download Mode, so I got a firmware and installed it via Odin, however, the bootloader loops?
PLEASE HELP ME!
Click to expand...
Click to collapse
I was facing the same problem some days ago, but after surfing this forum, I realised that if you have Kies running in the background, Odin will behave oddly and will not flash the firmware by going into a bootloader loop.
I suggest that you re-install the drivers again and make sure that Kies is not running in the background when you are flashing through Odin (just fire up your Task Manager in Windows and terminate the Kies process).
Hope this helps you...
hey guys
My samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
5AL3H said:
hey guys
My samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
Click to expand...
Click to collapse
As long as you can get in downloadmode you`re oke. Look om www.sammobile.com/firmware for the stock rom you need (country or region you live in) and flash it with Odin. See item 3 in my signature for a detailled tutorial how to do that. You might need a jig however, but try getting in downloadmode manualy for now.
Stock firmware follow instructions .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
I have a similar problem
My S3 does not work after I root it, please give me a instruction link to recuse it. Thanks.
I tried flashing (Odin v3.04) the official 4.1.1 after trying the official 4.1.2 and now neither of them work. I am constantly stuck at the "SAMSUNG" logo boot stage.
I can enter download mode fine and also recovery mode but I am stumped on what to do to fix the problem.
Does anyone have a fix?
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
That' did the trick... thanks!!!
err....
Having the same problem, after flashing stuck at samsung logo...cant but into recovery to do dalvik or anything else but can access download fine.I need to use my phone so replies are apprecciated :l.
Edit: Found more updated version of stock firmware from sammobile, will try that tomorrow and post results.I hope this works, though the problem may be because I cant wipe the dalvik or data because I cant access recovery, I was previously running cm10.1 nightlies and trying to get back to stock.
same problem
aaronq48 said:
Having the same problem, after flashing stuck at samsung logo...cant but into recovery to do dalvik or anything else but can access download fine.I need to use my phone so replies are apprecciated :l.
Edit: Found more updated version of stock firmware from sammobile, will try that tomorrow and post results.I hope this works, though the problem may be because I cant wipe the dalvik or data because I cant access recovery, I was previously running cm10.1 nightlies and trying to get back to stock.
Click to expand...
Click to collapse
same thing happened to me, I was running AOKP, i've tried everything......
successful reboot.thanks mikep99.
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
my GT-I9300 cannot even boot into recovery mode,what shell i do?
GT-i9300 stuck at the startup logo
Hi Guys
My GS3 is stuck at the boot logo. I've read and done all but with no luck,
First problem:
EFS error:
"Fake IMEI (usually 004999010640000)
Not registered to network
Fake Serial Number (usually 0000000)"
Now: stuck on boot logo.
I followed the forum for GT-i9500 thinking this would resolve my efs error. http://forum.xda-developers.com/showthread.php?t=2392632
I did the following:
1. installed PhoeniX.ROM.EFS.Backup.S4
2. Extracted the efs backup tar file & created a folder in the root called efsbackup & copied all extracted files to it.
3. Used Root Explorer to copy all files to the efs main folder. overwriting all.
4. Used the terminal:
su
busybox chown 1001:1001 /efs/nv_data.bin
busybox chmod 06755 /efs/nv_data.bin
5. rebooted.
nothing happened I was still stuck with the efs error
Now I entered safe mode, and nothing i could do, used the hold power button + restart.
now I'm in my second problem, stuck at the boot logo.
I can go to recovery & download mode....
Please help, i really need it hey
Use the link in my signature to navigate to the sticky roll-up thread. Look for the imei thread. Read it.
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Tried it , and didn't work
KiDo3Konvict said:
Tried it , and didn't work
Click to expand...
Click to collapse
Service centre paid for repair then
JJEgan said:
Service centre paid for repair then
Click to expand...
Click to collapse
that's the main problem , living in a 3rd world , means there's no service center here
gee2012 said:
As long as you can get in downloadmode you`re oke. Look om www.sammobile.com/firmware for the stock rom you need (country or region you live in) and flash it with Odin. See item 3 in my signature for a detailled tutorial how to do that. You might need a jig however, but try getting in downloadmode manualy for now.
Click to expand...
Click to collapse
I realize it's Saturday, July 26, 2014 - But I had this exact same problem a moment ago; I got out of it by flashing a different recovery with Odin v3.09. I've got soft bricked staring down "Recovery Booting" and that's it. I had download mode available, so went to CWM 6.0.4.5 from TWRP 2.7.1.0. I must admit I thought flashing my HTC Titan I via Goldcard was hard, but this is ridiculous which my SG3 has presented just to get something other than Android Recovery 3e. I got Knox disabled, the device rooted despite being 4.3, but it begs the question what's the point of updating to 4.4.x if going backwards becomes an act of God doing it. Update: Another attempt did not fix the booting problem; however it is a solution to get out of the recovery booting and boot into a normal startup and back to your phone being usable from whatever launcher you use (Nova in my case) It will return to normal startup once you do this if it becomes necessary to do so, which is a bit of a sigh of relief. I'm about at wit's end. One problem gets solved but the moment I ran Towelroot which really worked, new issues keep popping up. Is there a way to look at the bootloader or what OS update created this Knox monstrosity and made our lives much harder than it has to be. I don't mean to sound like I'm asking a stupid question but is there an apk or a procedure within whatever flavor recovery we use that will perform the equivalent of the Task29 we use to perform on the HD2, something that will wipe these devices down to their baby butts and start over; thanks?
Hey visit link sure it will work for you.
http://forum.xda-developers.com/showthread.php?t=1804117
Hit Thanks?
Sent from my GT-I9300 using XDA Free mobile app
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
:good::good::good::good:
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you son, God bless you. Sometimes, you simply forget about the simple tricks. Thanks again
Im new to site.i m using GALAXY TAB 10.1 P7500..I have stock ICS and rooted.
i tried to install CM 10,It shows error msg while installing.status 7.installation aborted.after that my tablet wont booting.it shows upto samsung Galaxy Tab 750.
I cant able to switch off the tab.if i continuously pressed the power buttons,it is restarting.
now,can i install stock ICS by odin to this tab???
or else there is other method to restore my tab
pls reply
procedure i did.
>transfer the downloaded file to sd card folder
>I entered into recovery mode and wipe data,then wiped cache and format/system folders
>then i clicked install from sd card option
>It shows error status 7-installation aborted.
akardr23 said:
Im new to site.i m using GALAXY TAB 10.1 P7500..I have stock ICS and rooted.
i tried to install CM 10,It shows error msg while installing.status 7.installation aborted.after that my tablet wont booting.it shows upto samsung Galaxy Tab 750.
I cant able to switch off the tab.if i continuously pressed the power buttons,it is restarting.
now,can i install stock ICS by odin to this tab???
or else there is other method to restore my tab
pls reply
procedure i did.
>transfer the downloaded file to sd card folder
>I entered into recovery mode and wipe data,then wiped cache and format/system folders
>then i clicked install from sd card option
>It shows error status 7-installation aborted.
Click to expand...
Click to collapse
What cwm and bootloader do you have installed?? you need the 6.1..... cwm and the ICS bootloader from http://droidbasement.com/db-blog/
And yes you can go back to stock ics by using odin, wipe data/cashe/dalvik and then flash the cwm in odin, the bootloader in odin, kernel isn't needed because it's a build-in kernel and then the ROM
Thanks 4 ur reply sir...i used CWM 5.8. and i didnt installed bootloader.sry i dont know sme technical terms.i updated official ics from samsung .and rooted by odin.
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off
DefQoN_BE said:
What cwm and bootloader do you have installed?? you need the 6.1..... cwm and the ICS bootloader from
And yes you can go back to stock ics by using odin, wipe data/cashe/dalvik and then flash the cwm in odin, the bootloader in odin, kernel isn't needed because it's a build-in kernel and then the ROM
Click to expand...
Click to collapse
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off..
can u tell how i use stock ICS by odin?where i get this?
akardr23 said:
Can u give/post the link for 6.1cwm????whether i install any kernel separately???
and also my tab not booting .It always shows Samsung galaxy Tab p750 neither start nor off..
can u tell how i use stock ICS by odin?where i get this?
Click to expand...
Click to collapse
http://droidbasement.com/galaxy/roms/cm10/p4wifi/
For cwm 6.1, download the recovery.tar and the bootloader4_0_4, flash it on odin on the PDA section, BUT ONLY USE CM10 with THIS!!!! Also download the ROM and also flzdh this under PDA
you can find stock ics firmware on http://www.sammobile.com/firmware/ stock firmware should revert everything, unroot/unbrick
DefQoN_BE said:
For cwm 6.1, download the recovery.tar and the bootloader4_0_4, flash it on odin on the PDA section, BUT ONLY USE CM10 with THIS!!!! Also download the ROM and also flzdh this under PDA
you can find stock ics firmware on stock firmware should revert everything, unroot/unbrick
Click to expand...
Click to collapse
thank you sir.i flashed correctly now.but after reboot the load screen with the Cyanogen Mod 1o boot screen. It will loop the load screen for 20min..whether i should wait or any wrong???
I update my s3 to 4.2 but the human features r not working. Plz suggest what. To do?
Sent from my GT-I9300 using XDA Premium App
akardr23 said:
thank you sir.i flashed correctly now.but after reboot the load screen with the Cyanogen Mod 1o boot screen. It will loop the load screen for 20min..whether i should wait or any wrong???
Click to expand...
Click to collapse
try to wipe data/factory reset and wipe cache after the you flash the CM rom
bearwards said:
try to wipe data/factory reset and wipe cache after the you flash the CM rom
Click to expand...
Click to collapse
thank you so much..it s working...jb s so smooth and quick ,but cant able to make voice call..so restore back to ICS.
I installed cm10 p4 experimental along with bootloader,recovery and modem.If i installed that modem,i cant make voice call in galaxy tab 10.1 3G.
If i followed the procedures in this link http://forum.xda-developers.com/showthread.php?t=1875024 ..they told to install another modem.when i installed that modem,boot loop problem occuring .
what to do???
Whether it is necessary to install modem[given with CM10 rom]?
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response
1) This isn't urgent. We get people 'crying wolf' on here all the time. Having a thread title like this is a good way to have people ignore your thread.
2) Also, using a title like [URGENT] HELP please !!! is another good way to have people ignore your thread. If you want help, you need to use a descriptive thread title
3) Unless you use sentencing/paragraphing, your OP is impossible to read. I certainly didn't read past the first line & many other people here won't unless you fix it.
MistahBungle said:
1) This isn't urgent. We get people 'crying wolf' on here all the time. Having a thread title like this is a good way to have people ignore your thread.
2) Also, using a title like [URGENT] HELP please !!! is another good way to have people ignore your thread. If you want help, you need to use a descriptive thread title
3) Unless you use sentencing/paragraphing, your OP is impossible to read. I certainly didn't read past the first line & many other people here won't unless you fix it.
Click to expand...
Click to collapse
I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits.
I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen.
So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard.
It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package
can u help me now please?? anything i can do with odin?? Thank you.
machokingjim said:
I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits.
I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen.
So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard.
It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package
can u help me now please?? anything i can do with odin?? Thank you.
Click to expand...
Click to collapse
Can u enter download mode/recovery? Do a factory reset,and see if you can boot.
GamingDj said:
Can u enter download mode/recovery? Do a factory reset,and see if you can boot.
Click to expand...
Click to collapse
I can enter recovery mode. I tried it but of no use. Wat else can i do??
I also tried flashing paranoid rom but it returned signature verification failed.
machokingjim said:
I can enter recovery mode. I tried it but of no use. Wat else can i do??
I also tried flashing paranoid rom but it returned signature verification failed.
Click to expand...
Click to collapse
Flash Siyah Kernel via Odin
GamingDj said:
Flash Siyah Kernel via Odin
Click to expand...
Click to collapse
In recovery mode odin does not detect my phone but in boot screen, where the phone is stuck, it detects. So the flashing process failed stating couldnt open COM port.
What should i do to make my phone get detected in the recovery mode via odin? I had installed clock work mod recovery manually.
Thank you vry much.
Search for Hopper8's thread Troubleshoot a failed odin flash
GamingDj said:
Search for Hopper8's thread Troubleshoot a failed odin flash
Click to expand...
Click to collapse
Thank you finally got my phone back... Thank u vry much
Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
DANNY_DANIEL said:
Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Click to expand...
Click to collapse
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Dakura said:
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Click to expand...
Click to collapse
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
MistahBungle said:
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100"
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Dakura said:
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
DANNY_DANIEL said:
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
Click to expand...
Click to collapse
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
yes can. give me 12 hours for try this. thanks for help! :good:
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
DANNY_DANIEL said:
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
Click to expand...
Click to collapse
Are u sure u are doing everthing correctly? You need to download stock from your region, check if you stock firmware is correct, you can search your development forums for stock firmware mirrors or you can download from samfirmware.com , you need to put it on PDA, and then just flash.
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
dinoredfield said:
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Before i update SuperSU, My WeChat Can't open moment, i know it problem in WeChat apps. Btw my SdCard not detect. And my gallery can't open and show the text "Not enough space. Delete unnecessary items such as ... pictures, videos..." that why i exchange to revolutionROm. It like Samsung note 3/Galaxy s4. Then SuperSU command update a SuperSU in CWM and i have a problem. -_- . now my phone back to normal, just gallery can't open. I remove the SdCard. it same.
As the message said, delete unnecessary items, if that doesn't work, format sd card (internal and external both) and if that doesn't work, use nuke script, re-install rom.