Hey everyone,
I am new to these forums. I have an issue and I have searched everywhere for the solution.
I have a SGS2 and I rooted it with Lite'ning Rom v4.2.
I followed the instruction on this thread and my phone loaded the ROM successfully.
I have an issue, since I installed this rom my WiFi is not working.
Everytime I got to wifi settings, I see the available networks, however when trying to connect it just attempts to connect then disconnects.
I saw on this thread that another user had to flash the kernel to get his WiFi working.
I download the XXKG3 kernel for my S2 and flashed however still not working.
I am asking for some help with this as where I live I have no 3G reception so have to use Wifi in order to use internet on my S2.
Any help is greatly appreciated.
Guys, i just rooted my galaxy s2 using ODIN, however, my GPS is no more locking my position (it used to lock in just 10s), is there anyway i can fix this? can i get back my original kernel? i know there are lots of links in this forum but most of it are multiuploads which is no more working....
android version - 2.3.6
baseband - I9100DXKL1
Kernel - [email protected]#2 (Im not sure about my kernel before rooting)
Hi guys, this really makes me crazy and I'm not able to find a solution for this problem. I've tried to search a lot on various forums but without success. I like MIUI based roms but I facing a problem with manual selection of network operators. This just doesn't work and everytime I try to search for a operator I get a "error while searching for networks" error and I can not manually select the network. I've noticed this happen on all 2.x MIUI roms with FXP based kernel. With roms based on stock kernel everything works OK. Does anybody have an idea what's the problem here and how to fix it ? I'm not sure if this is rom or kernel based issue.
My current os:
Baseband: 2.1.71
Kernel: 2.6.29-zdzihu-mod4.05
Rom: MIUI-2.3.2_Cobrato (Android 2.3.7)
Any help appreciated!
Dial *#*#4636#*#* and go to phone information, wcdma prefered, turn on radio button and check apn settings.
It may also be your SIM card. Try it in another phone. May be broken.
Sent from my LT26i using xda premium
Sikiduck said:
Dial *#*#4636#*#* and go to phone information, wcdma prefered, turn on radio button and check apn settings.
It may also be your SIM card. Try it in another phone. May be broken.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Hi, thanks for reply. I'm affraid problem is not in the phone nor simcard as on stock firmware this works fine. Also I'm able to register into a network as strongest network is selected automatically but I'cant select the network manually after pressing the search network button. So I can use the phone, I just can't tell the phone to select network manually. So this is annoying especially if you live on borders with another country or in roming since you are note able to select your preffered network. I mean if you go to Settings ---> Mobile network settings ---> Network operators ---> Search for networks. If you click on it, you should get the error.
Error while searching for networks
I am facing similar kind of issue on my Venue.
I have installed MIUI with 408(update.pkg)
Venue is not attaching to mobile network at all, I have tried Manual and Automatic modes, its giving Error while searching for networks
Wifi and other features are working fine.
I will really appreciate any help ion this!!!
Thanks and regards,
HNM
Also having the same problema, but with TyphooN_CM7_v3.8.5-MAGLDR ROM and HTC HD2.
Do any body have any clue?
mizuuu said:
Hi guys, this really makes me crazy and I'm not able to find a solution for this problem. I've tried to search a lot on various forums but without success. I like MIUI based roms but I facing a problem with manual selection of network operators. This just doesn't work and everytime I try to search for a operator I get a "error while searching for networks" error and I can not manually select the network. I've noticed this happen on all 2.x MIUI roms with FXP based kernel. With roms based on stock kernel everything works OK. Does anybody have an idea what's the problem here and how to fix it ? I'm not sure if this is rom or kernel based issue.
My current os:
Baseband: 2.1.71
Kernel: 2.6.29-zdzihu-mod4.05
Rom: MIUI-2.3.2_Cobrato (Android 2.3.7)
Any help appreciated!
Click to expand...
Click to collapse
bzene said:
Also having the same problema, but with TyphooN_CM7_v3.8.5-MAGLDR ROM and HTC HD2.
Do any body have any clue?
Click to expand...
Click to collapse
Hey mizuuu & bzene, sorry to persist, just to discard operators company side by troubleshooting, did you try introducing another SIM of the same company to check if the issue remains from operator company side or OS side?
Repeat, just to discard big point of view about troubleshooting
Regards
I have an Xperia GO and have the same problem with the MIUI for Sony Xperia Go bassed on CM9 FXP and with the CM9 FXP205.
The latest roms than I have tested are :
Unofficial_MIUI_LOTUS_1359919519.zip and
FXP205-cm-9-20130201-UNOFFICIAL-lotus.zip
5020T
I've got an Alcatel 5020T which has the same problem, unfortunately I cannot find the stock or AOSP ROM for it, so I am stuck with MIUI. I've messed around with the Engineering Mode settings royally messing those up as well in efforts to reset it. This is a daily phone and I do not have another at my disposal at present so it would be VERY helpful if anyone can help.
I've installed ClockworkMod, and running Miui_Alcatel-OT5020E_4.4.4 with the 4.5.23 update. AT one point it did work at the beginning but I believe since the Engineering mode settings are below rom level they have stuck and are sticking every time I am resetting the ROM to 4.4.4 and 4.5.3 and the original port 4.3.28.
I would like to build AOSP or Cyan for it, but I do not currently have access to a Ubuntu or linux computer to do so.
Asking for one (or more) of the following from anyone:
1) Stock or any other rom for the 5020T (any of the 5020W 5020D 5020E roms should work, or are close enough I'd try them)
2) Default settings for everything in the engineering mode for the 5020 under the "Telephony" tab
3) A guide to somehow magically reset the engineering mode settings to some sort of default which most likely does not exist.
Thank you all in advance for your support, and apologies for being a grave digger.
Hello all,
As you can tell I´m new in the forums as well in the custom ROM scene, I´m having some issues with my S3 after applying the ROM below
[ROM] AOKP & MORE (4.2.1) /01.01.13/Resurrection Remix JB V3.1.4
phone SGS3 GT I9300
carrier Claro / Costa Rica
old ROM ICS 4.0.4 stock
I did some search on the forums but was unable to find much about my issues
after placing a successful call to my local carrier to get the steps on reconfiguring the internet APN again, now I have no sound at all for phone calls, they provided the instructions and asked me to restart the phone, after the restart the issue with the sound came up and the internet did not work...
the no audio problem is what concerns me the most (obviously)
all other audio apps, ringtones etc work fine
not sure what other information I can provide for the moment, but surely appreciate some help/recommendations
UPDATE: after some restarts the phone started working but new issues came up
seems this ROM has many bugs, at least for me
currently using foxhound 1.7... so far so good
I'm no sure if this goes here but anyway, since yesterday I've been trying to upload my Custom ROM from my Galaxy S3, but everytime i change it the connectivity (2G/3G) doesn't works but the rest is ok. I've been on Omega Rom in android 4.1.1 and in this one the Data Conectivity works, but when I tried with the new versions of Omega Rom and Carbon Rom, 2G/3G just dissapear, and I don't know why this is happening . I hope someone can help me, or is it a problem from Android 4.2.2 ? PS: I can write in any of those official threads of the Roms because it doesn't allow me. Thanks so much
In setting on network pages find these
Mobile data = on
Network mode = auto
Make sure use 2g is disabled