Hi everyone,
I'm trying to flash CM7 on my Dell Venue. The problem i'm running into is getting into fast boot mode so I can install CWM.
I slide the phone up (to show the keyboard) held down the volume and power but that just showed the dell logo and then booted up.
I tried camera & power but that showed a usb cable going to a computer..
Is there something I am doing wrong?
Can I put dell venue roms on the dell venue pro
Thanks in advanced!
Indian
lol u must read procedure again.
It mentions pressing vol up + vol down buttom togather right when dell logo flashes, to boot in recovery.
Can I install dell venue roms on dell venue pro?
Sent from my SGH-T989 using Tapatalk
Indian9990 said:
Can I install dell venue roms on dell venue pro?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
No, you can not. You might want to visit the xda thread for the Dell Venue Pro and see if there are any custom ROMs available.
Indian9990 said:
Hi everyone,
I'm trying to flash CM7 on my Dell Venue. The problem i'm running into is getting into fast boot mode so I can install CWM.
I slide the phone up (to show the keyboard) held down the volume and power but that just showed the dell logo and then booted up.
I tried camera & power but that showed a usb cable going to a computer..
Is there something I am doing wrong?
Can I put dell venue roms on the dell venue pro
Thanks in advanced!
Indian
Click to expand...
Click to collapse
Some mistake here mate.
Yours is a Windows Mobile
You are in wrong place
Indian9990 said:
Hi everyone,
I slide the phone up (to show the keyboard) held down the volume and power but that just showed the dell logo and then booted up.
Indian
Click to expand...
Click to collapse
I was wondering about this, but I figured it was a bad Google Translate job, especially with the newer members of the forum that are from Thailand, Vietnam, Korea, etc. and English is probably not the primary language. I know when I am on the Vietnamese forum, the English translation I see from Google Chrome is pretty bad, but I can usually follow what the intent is.
As much time as I have spent in countries other than the US, I am always impressed to find people everywhere that can speak several languages. I wish I had paid more attention to my German classes many years ago.
Hi all,
I just got hold of another faulty streak only this one is partially working so im hoping to fix it. One issue im having is in the recovery menu of this particular streak there is no 'screen calibration' option, you know the white screen you get before you go into fastboot (camera + power). The calibration option is simply not there. I've seen a few streaks lately and they've all had this option so why does this one not have it, any ideas ?
Thanks
drkdeath5000 said:
Hi all,
I just got hold of another faulty streak only this one is partially working so im hoping to fix it. One issue im having is in the recovery menu of this particular streak there is no 'screen calibration' option, you know the white screen you get before you go into fastboot (camera + power). The calibration option is simply not there. I've seen a few streaks lately and they've all had this option so why does this one not have it, any ideas ?
Thanks
Click to expand...
Click to collapse
another way to show the screen calibration option is ... press power button until panel lights on... release it... when the dell logo shows up... press up + down volume button until it goes into recovery menu...
# 3 menu option should show screen calibration :good:
deysmacro said:
another way to show the screen calibration option is ... press power button until panel lights on... release it... when the dell logo shows up... press up + down volume button until it goes into recovery menu...
# 3 menu option should show screen calibration :good:
Click to expand...
Click to collapse
Thanks i found that option via recovery and the streak touch is working again now ... i just wondered why it wasnt in the bootloader menu (power + camera) as its the first streak i've found without the option, perhaps its an older streak model ?
The only older models I know of for the Streak are engineering units with purple cases and pre-release units in Android green.
Well i just updated another streak to the 407 rom and suprise suprise the touch calibration is gone from the bootloader screen. I'm certain it was there before flashing 407 so it must be something to do with the 407 update which is removing it. In other words it should be nothing to worry about .
drkdeath5000 said:
Well i just updated another streak to the 407 rom and suprise suprise the touch calibration is gone from the bootloader screen. I'm certain it was there before flashing 407 so it must be something to do with the 407 update which is removing it. In other words it should be nothing to worry about .
Click to expand...
Click to collapse
have you tried to flash custom rom such as dsc or longhorn and see if the option comes back?
because i am at longhorn 2.7 and can see the screen calibration option....
oh.. forgot to mention... it does not use word screen calibration.. it use word touch calibration instead...
deysmacro said:
have you tried to flash custom rom such as dsc or longhorn and see if the option comes back?
because i am at longhorn 2.7 and can see the screen calibration option....
oh.. forgot to mention... it does not use word screen calibration.. it use word touch calibration instead...
Click to expand...
Click to collapse
Its running DSC v1.3 and the option isnt there. Will have to give longhorn a try to see if it comes back but im guessing its something to do with the official 407 updating the bootloader. Presumably i could flash an earlier stock rom and that would bring it back.
drkdeath5000 said:
Its running DSC v1.3 and the option isnt there. Will have to give longhorn a try to see if it comes back but im guessing its something to do with the official 407 updating the bootloader. Presumably i could flash an earlier stock rom and that would bring it back.
Click to expand...
Click to collapse
no way touch calibration is not there.. i use dsc as well... i have it both at white letter recovery menu and before selecting fastboot mode...
deysmacro said:
no way touch calibration is not there.. i use dsc as well... i have it both at white letter recovery menu and before selecting fastboot mode...
Click to expand...
Click to collapse
How odd. So its definately there on yours, in the white bootloader menu ? Did you flash 406 or 407 before DSC ?
My main streak is running an older DSC version, presuming DSC 1.0 and the calibration option is still there in the bootloader menu so im almost certain 406 / 407 are the culprits. Anyone willing to give it a try ?
drkdeath5000 said:
How odd. So its definately there on yours, in the white bootloader menu ? Did you flash 406 or 407 before DSC ?
My main streak is running an older DSC version, presuming DSC 1.0 and the calibration option is still there in the bootloader menu so im almost certain 406 / 407 are the culprits. Anyone willing to give it a try ?
Click to expand...
Click to collapse
i dont remember which one... it is quite long time ago... i think i am on 406 and then goes straight to custom rom...
My Dell Streak 5 Fastboot is missing "Touch calibration" too
deysmacro said:
i dont remember which one... it is quite long time ago... i think i am on 406 and then goes straight to custom rom...
Click to expand...
Click to collapse
I have the same problem too, when I go to Fastboot via pressing power+camera button simultaneously these days, I do not see the words "Touch calibration" anymore. It is missing now. I only realize it recently. I am concern that this might be due to some corrupt system files on my Streak 5, that might spread to other functions too, soon... will it? Does anyone knows about this? Or how to fix it?
Here my story. I apologies, sorry if it is a long one...
I only realize the missing "Touch calibration" words recently.
My Streak was recently stuck at Dell Logo on boot due to an app I install. I was trying to use this app that enable me to install ROM directly from the SD without going into the Recovery Mode (i.e. turn off phone, press up+down volume buttons and power on button simultaneously). Just click on this app menu to update to latest CWM and then click another menu to load a ROM to flash. That ended in disaster, really made my Streak to just stuck at Dell logo instead of flashing the intended ROM. When I remove the battery and put it back, I go to recovery mode. The CWM recovery mode was corrupted. If I am not mistaken, I was not able to go into Fastboot either. At that time, I was using 16GB innerSD when this happened. I replaced back my original innerSD 2GB, flash it with CWM and Longhorn 2.9.3. I was lucky it worked.
Next, I was searching for a way to update the baseband to 407 (GAUSB1A1406214-EU). My streak was on 347. As I understood, my Dell Streak suppose to use baseband 407 if I choose Longhorn 2.9.3 {{ Please correct me if I am wrong, I am still new at doing all these mod }} It took me almost a month to upgrade the baseband to 407, all end up with failure to upgrade/no change. I even accidentally downgraded my Streak to 305 after I flash AMSS and DSP1 which were in QDL folders I downloaded from XDA (Nobody's fault but mine). But I finally manage to do it, after reading someone feedback (sorry can't remember) that says, to go flash 350 ROM first since it region 14, before using auto-update menu on the Dell Streak to get to ROM 407 installed. I use 407 ROM for just a short while and then I flashed to Longhorn 2.9.3 using CWM recovery.
Like I said, I only realize it recently. So, in my case, it is either the 407 Recovery+ROM update or the Corrupted Flashing method that lead to the lost of the "Touch calibration" on Fastboot screen. Should I get this fixed?
EDITED:
After many times using QDL Tools, and upgrade to Stock ROM 407, I have CONFIRMED the "Touch Calibration" will disappear. No cause for alarm. It seems Dell removed the option from the Fastboot Mode screen on 407.
Razak RK said:
I have the same problem too, when I go to Fastboot via pressing power+camera button simultaneously these days, I do not see the words "Touch calibration" anymore. It is missing now. I only realize it recently. I am concern that this might be due to some corrupt system files on my Streak 5, that might spread to other functions too, soon... will it? Does anyone knows about this? Or how to fix it?
Here my story. I apologies, sorry if it is a long one...
I only realize the missing "Touch calibration" words recently.
My Streak was recently stuck at Dell Logo on boot due to an app I install. I was trying to use this app that enable me to install ROM directly from the SD without going into the Recovery Mode (i.e. turn off phone, press up+down volume buttons and power on button simultaneously). Just click on this app menu to update to latest CWM and then click another menu to load a ROM to flash. That ended in disaster, really made my Streak to just stuck at Dell logo instead of flashing the intended ROM. When I remove the battery and put it back, I go to recovery mode. The CWM recovery mode was corrupted. If I am not mistaken, I was not able to go into Fastboot either. At that time, I was using 16GB innerSD when this happened. I replaced back my original innerSD 2GB, flash it with CWM and Longhorn 2.9.3. I was lucky it worked.
Next, I was searching for a way to update the baseband to 407 (GAUSB1A1406214-EU). My streak was on 347. As I understood, my Dell Streak suppose to use baseband 407 if I choose Longhorn 2.9.3 {{ Please correct me if I am wrong, I am still new at doing all these mod }} It took me almost a month to upgrade the baseband to 407, all end up with failure to upgrade/no change. I even accidentally downgraded my Streak to 305 after I flash AMSS and DSP1 which were in QDL folders I downloaded from XDA (Nobody's fault but mine). But I finally manage to do it, after reading someone feedback (sorry can't remember) that says, to go flash 350 ROM first since it region 14, before using auto-update menu on the Dell Streak to get to ROM 407 installed. I use 407 ROM for just a short while and then I flashed to Longhorn 2.9.3 using CWM recovery.
Like I said, I only realize it recently. So, in my case, it is either the 407 Recovery+ROM update or the Corrupted Flashing method that lead to the lost of the "Touch calibration" on Fastboot screen. Should I get this fixed?
Click to expand...
Click to collapse
I too have the same problem, recently upgraded with 2.3 from 2.2.2 but after a week my screen is not responding and did thrice screen calibration but no use . After that I roll backed with my previous version 2.2.2. Even though no change still my screen is not responding.But I can able to touch few things on my screen but not fully
Could you please help on this
drkdeath5000 said:
Well i just updated another streak to the 407 rom and suprise suprise the touch calibration is gone from the bootloader screen. I'm certain it was there before flashing 407 so it must be something to do with the 407 update which is removing it. In other words it should be nothing to worry about .
Click to expand...
Click to collapse
nsrpani said:
I too have the same problem, recently upgraded with 2.3 from 2.2.2 but after a week my screen is not responding and did thrice screen calibration but no use . After that I roll backed with my previous version 2.2.2. Even though no change still my screen is not responding.But I can able to touch few things on my screen but not fully
Could you please help on this
Click to expand...
Click to collapse
Did you try screen calibration in Recovery Mode? I read somewhere in xda-dev. about this, if my memory is correct... And I can't remember where I found it. Do it at your own risk...
Turn off your phone.
Clean your screen with just slightly wet tissue or cloth, ensure to wipe it clean and dry.
Don't turn on your phone.
Press volume up, volume down, power on button simultaneously together. Don't let go until the Recovery Mode i.e. Black Screen with 4 options comes out.
Select Screen Calibration, and let it run, don't touch anything at all.
If I am not mistaken, the phone will booth up after that.
Best way is to use the search function in xda-dev, to find solutions given by Senior Members on this matter.
Goodluck.
Razak RK said:
Did you try screen calibration in Recovery Mode? I read somewhere in xda-dev. about this, if my memory is correct... And I can't remember where I found it. Do it at your own risk...
Turn off your phone.
Clean your screen with just slightly wet tissue or cloth, ensure to wipe it clean and dry.
Don't turn on your phone.
Press volume up, volume down, power on button simultaneously together. Don't let go until the Recovery Mode i.e. Black Screen with 4 options comes out.
Select Screen Calibration, and let it run, don't touch anything at all.
If I am not mistaken, the phone will booth up after that.
Best way is to use the search function in xda-dev, to find solutions given by Senior Members on this matter.
Goodluck.
Click to expand...
Click to collapse
Thank you for your reply. Tried Screen Calibration in Recovery mode thrice but no use. Any other solution?
Other instructions on the user manual :~
~ factory reset if device can't boot up
~ flash recovery & matching ROM if system is currupted
~ recalibrate screen (obviously you've done enough, but worth checking if your steps correct - see picture taken from User manual in DS5 SD folder)
Sent from my Dell Streak using xda app-developers app
@nsrpani,
Have you solve your problem? If you have, please share your solution here, so that if other have the same problem, they will know how to solve it.
If you have not solve it, have a look at this page on how to Repair or Reset your DS5:
Unbrick/Repair/Reset your Streak- QDL Tool and ADB
Hi Razak, Sorry for the late reply. I will try this process and let u know soon.
---------- Post added at 02:12 PM ---------- Previous post was at 02:01 PM ----------
HI Razak, Tried again screen calibration as per your screen shot attached. But still issue was there...I will try your second option that is with QDL tool I will try and let you know soon.
nsrpani said:
Hi Razak, Sorry for the late reply. I will try this process and let u know soon.
---------- Post added at 02:12 PM ---------- Previous post was at 02:01 PM ----------
HI Razak, Tried again screen calibration as per your screen shot attached. But still issue was there...I will try your second option that is with QDL tool I will try and let you know soon.
Click to expand...
Click to collapse
Hi Razak, I am trying to repair my DS with QDLTool but the drivers provided is for other than Windows 7. I am using Windows 7, 64 bit. I have tried with win 32 but its not working for me.
nsrpani said:
Hi Razak, I am trying to repair my DS with QDLTool but the drivers provided is for other than Windows 7. I am using Windows 7, 64 bit. I have tried with win 32 but its not working for me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=42807697
Sent from my Dell Streak 5
Powered by INDOSAT
nsrpani said:
Hi Razak, I am trying to repair my DS with QDLTool but the drivers provided is for other than Windows 7. I am using Windows 7, 64 bit. I have tried with win 32 but its not working for me.
Click to expand...
Click to collapse
I am using Window XP, so, I don't know about Win7. I am sorry, I cannot help you more. Perhaps senior members could help on this matter.
Other things that I can comment are:
When I use the QDLTool.exe from the QDL Tool folder, it did not work, i.e. it Failed.
So, I run the QDLTool.exe from the streakflash folder first. I get it pass.
Then, I run the QDLTool.exe from the QDL Tool folder. Then only it can pass.
At one time, my innerSD is so corrupted that I have to remove it and erase everything on it, then I put it back in and run both QDLTool.exe as I mention above. I erase the innerSD using USB Image Tool 1.59, which I get from this post: http://forum.xda-developers.com/showpost.php?p=31067359&postcount=2
hello, guys. I hope smbd can help me with my problem here.
NT bnt250A 8GB
i tried to restore the factory settings of my rooted NT through the menu (soft reset)
what kind of root I'm completely unaware (it belonged to another guy before)
in the process of booting the picture with a carton box on a white background stucked and began flickering the photo attached)
I tried many time to bring NT to live but unfortunately nothing helped: I turned off/on 8 times witn Home button and without...
the battery is ok - more than 50%
Pls advice me the way to bring my dead nook to live.
many thanks in advance
cooper.spb said:
hello, guys. I hope smbd can help me with my problem here.
NT bnt250A 8GB
i tried to restore the factory settings of my rooted NT through the menu (soft reset)
what kind of root I'm completely unaware (it belonged to another guy before)
in the process of booting the picture with a carton box on a white background stucked and began flickering the photo attached)
I tried many time to bring NT to live but unfortunately nothing helped: I turned off/on 8 times witn Home button and without...
the battery is ok - more than 50%
Pls advice me the way to bring my dead nook to live.
many thanks in advance
Click to expand...
Click to collapse
The carton image is the recovery splash screen. But since it doesn't load recovery, something must be wrong.
You can try unbricking methods, but I think you should make sdcard bootable cwm recovery and flash a cyanogen mod Rom.
Look for guides, links, etc in development section.
Sent from my ST27i
cooper.spb said:
hello, guys. I hope smbd can help me with my problem here.
NT bnt250A 8GB
i tried to restore the factory settings of my rooted NT through the menu (soft reset)
what kind of root I'm completely unaware (it belonged to another guy before)
in the process of booting the picture with a carton box on a white background stucked and began flickering the photo attached)
I tried many time to bring NT to live but unfortunately nothing helped: I turned off/on 8 times witn Home button and without...
the battery is ok - more than 50%
Pls advice me the way to bring my dead nook to live.
many thanks in advance
Click to expand...
Click to collapse
If you'd like to restore to stock, some info/tools can be found at https://github.com/succulent/acclaim_recovery_sdcard.
Before you consider using any of the so-called "unbrick" tools/methods, see http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.
Pretty much the last 6 months of 2012 my Dell has been rebooting when I've tried to use it. It can stay on for a minute if I'm lucky, but then it reboots, sometimes gets stuck on Dell logo. Doesn't seem to be a battery cover issue. I installed Olleh on it to hopefully fix it, but that didn't fix it, I tried replacing the internal SD, which also didn't fix it. I'm at a loss. Was an expensive contract, and I didn't get much use out of it, so it would be a shame to not be able to use it again, but it happens. At least I know not to use a Dell product again.
streak 5
android 2.3.3
baseband GAUSB1A1406214-EU
kernel 2.6.35.7-perf
OEM GAUSB1A140714
Johnny Grunge said:
Pretty much the last 6 months of 2012 my Dell has been rebooting when I've tried to use it. It can stay on for a minute if I'm lucky, but then it reboots, sometimes gets stuck on Dell logo. Doesn't seem to be a battery cover issue. I installed Olleh on it to hopefully fix it, but that didn't fix it, I tried replacing the internal SD, which also didn't fix it. I'm at a loss. Was an expensive contract, and I didn't get much use out of it, so it would be a shame to not be able to use it again, but it happens. At least I know not to use a Dell product again.
streak 5
android 2.3.3
baseband GAUSB1A1406214-EU
kernel 2.6.35.7-perf
OEM GAUSB1A140714
Click to expand...
Click to collapse
i have the same problem excatly like you are, and i search the net & not got the answer i tried streak flash & Qdltool but nothing happend the problem keep remain..and i'm still not able to get the fastboot mode...is there any one can help this situation?? here need help here
Johnny Grunge said:
Pretty much the last 6 months of 2012 my Dell has been rebooting when I've tried to use it. It can stay on for a minute if I'm lucky, but then it reboots, sometimes gets stuck on Dell logo. Doesn't seem to be a battery cover issue. I installed Olleh on it to hopefully fix it, but that didn't fix it, I tried replacing the internal SD, which also didn't fix it. I'm at a loss. Was an expensive contract, and I didn't get much use out of it, so it would be a shame to not be able to use it again, but it happens. At least I know not to use a Dell product again.
streak 5
android 2.3.3
baseband GAUSB1A1406214-EU
kernel 2.6.35.7-perf
OEM GAUSB1A140714
Click to expand...
Click to collapse
You are on 5treak XDA place, why u not try on Dell Streak 5 Android Development, if u like Stock Style u can try install DSC 2.3 ROM from master n0p. If u want to try another style u can try install MIUI 2.4.20 from nitin1978 or PCM7-Streak from nom051205. I use MIUI 2.4.20 from nitin1978 with n0p kernel phoenix U30 for MIUI n never get reboot when i use it.
---------- Post added at 05:10 AM ---------- Previous post was at 05:05 AM ----------
nedinoval said:
i have the same problem excatly like you are, and i search the net & not got the answer i tried streak flash & Qdltool but nothing happend the problem keep remain..and i'm still not able to get the fastboot mode...is there any one can help this situation?? here need help here
Click to expand...
Click to collapse
try search carefully on Streak 5 Android Development, it's all explain clearly. If u want to go to FASTBOOT mode push POWER + CAMERA button together until display white n then u on FASTBOOT mode.
I search and read all the problem carefully on this dell forum and the all tell about how to fastboot by pressing the power+cam button..well my problem is the dell get dumb!! When i press those two button the phone has no respone at all..but when i press the two volume i got my recovery mode..that the problem how can you get into fastboot while the phone is dumb and no respone at all while pressing power and cam button
Hi All,
Since 3 years I had upgraded my Android 2.1 Flytouch 10.1 Tablet into Flytouch 2.2. #3245 version, without any major problems.
My only problem was that I was not able to use Titanium back up and some other apps unless I was rooted, so after many attempts
I succeeded to root it and to be able to use it. Until the time I decided to upgrade my BusyBox to the latest version. After that I rebooted
my tablet with success but only for once because since then it freezes at start up.
How can I recover my system please.??
Thanks.
AA
altkon said:
Hi All,
Since 3 years I had upgraded my Android 2.1 Flytouch 10.1 Tablet into Flytouch 2.2. #3245 version, without any major problems.
My only problem was that I was not able to use Titanium back up and some other apps unless I was rooted, so after many attempts
I succeeded to root it and to be able to use it. Until the time I decided to upgrade my BusyBox to the latest version. After that I rebooted
my tablet with success but only for once because since then it freezes at start up.
How can I recover my system please.??
Thanks.
AA
Click to expand...
Click to collapse
Flash this in recovery --> UPDATE-SuperSU-v1.93.zip
delete cache/dalvik in recovery
Can you further elaborate as to how I shall do it since I cannot initialize the Recovery Utility on my Tablet.
The only think I can do is I can connect it to my WXP desktop with a male to male USB cable and get it
to be recognized by the WXP.
I would rather prefer to get it to boot from a SD card to update or recover my Tablet.
Sorry for my ignorance as I am only a newbee..
Thanks a lot.
Cant You enter Recovery mode??
Gesendet von meinem One S mit Tapatalk
Sorry but I dont understand your language...
Anyway I would rather prefer a more detailful guideance.
Thanks .
AA
altkon said:
Sorry but I dont understand your language...
Anyway I would rather prefer a more detailful guideance.
Thanks .
AA
Click to expand...
Click to collapse
Because I have tried several times to reset or recover by pressing Power + Home bottons etc
and a notification came that there is " no image " to recover from, would you or someone
else explain to me how to flash it to the old version Android 2.2. #3245 or later.
Thanks a lot.
AA
Adrian Gannon: how stupid is this cant saee what button she is pressing on third................mad!!!!!!!!!!!
John Stancliff: this helped a lot, except my pad won't time out.... it stops at 1 second and freezes. unit shows unable to recover try from SD....that doesn't even work....
Tamás Markó: Thank you!
Gonzalo Martinez: @mrharleydog1 power home center squere
anolane205: I sooooo need some help...i press the three and get the press the required keys screen but as I hold it still boots up.... I downloaded a lock screen application and can't open my tablet maybe cause I have the superpad 3 2.3... did someone tell me please what I'm doing wrong
paulaboyd: @fapobee!! Thanks!!!! I didn't Knew that for Super Pad 3 I have to press menu button instead! It Worked!!!
paul beccio boulds MOT: at first press start ,menu and home buttons together untill reboot comes on
fiatmareaturbo: Hi tryed change language from china to english done some misstake it not start anymoore how to restart android 2.3