Hi Everyone..
I really need some help here..
(sorry if I am posting this at the wrong place. If so please guide me where to do so.)
I have been using Samsung Galaxy S II (i9100G) with CM 10.1 M2 for more than a week now. Was using CM monthly releases Prior to that since 4-5 months along with CWM recovery.
My set of problems started today when while using play store when my phone suddenly restarted. then it was stuck at the CM boot loader for long.
so i restarted and then the phone was stuck at the Samsung logo despite repeated boots.
then i booted into CWM recovery and it gave me an error saying E: Can't mount /cache/recovery/log and four other errors similar to this.
I didn't want to flash the ROM again as i had this one tweaked just the way i wanted it.
So i did a mounts and storage -> Format /cache x 3 then advanced -> reboot recovery
later the phone did not display the Samsung logo but showed a message logo,jpg draw failed and then did boot into recovery.
but it showed the same error.
so i reboot the phone.
this time it just would not display anything. Wont even boot into recovery or download mode.
it did not even display anything after plugging in the charger. Did get warm after a while though.
i am totally clueless to what to do now.
can someone please tell me what went wrong and how to cure it??
i know i can use a usb jig but would need some time to get it. please tell me the optimum way to get around this.
Please someone help me revive my precious phone!!
docZ12 said:
Hi Everyone..
I really need some help here..
(sorry if I am posting this at the wrong place. If so please guide me where to do so.)
I have been using Samsung Galaxy S II (i9100G) with CM 10.1 M2 for more than a week now. Was using CM monthly releases Prior to that since 4-5 months along with CWM recovery.
My set of problems started today when while using play store when my phone suddenly restarted. then it was stuck at the CWM boot loader for long.
so i restarted and then the phone was stuck at the Samsung logo despite repeated boots.
then i booted into CWM recovery and it gave me an error saying E: Can't mount /cache/recovery/log and four other errors similar to this.
I didn't want to flash the ROM again as i had this one tweaked just the way i wanted it.
So i did a mounts and storage -> Format /cache x 3 then advanced -> reboot recovery
later the phone did not display the Samsung logo but showed a message logo,jpg draw failed and then did boot into recovery.
but it showed the same error.
so i reboot the phone.
this time it just would not display anything. Wont even boot into recovery or download mode.
it did not even display anything after plugging in the charger. Did get warm after a while though.
i am totally clueless to what to do now.
can someone please tell me what went wrong and how to cure it??
i know i can use a usb jig but would need some time to get it. please tell me the optimum way to get around this.
Please someone help me revive my precious phone!!
Click to expand...
Click to collapse
If you can't boot into download or recovery than i think you need to wait for that usb jig.
You can always try, pull out battery, hold power for 10 second, put battery back in and try to boot.
any clue whats wrong?
Christiaan91 said:
If you can't boot into download or recovery than i think you need to wait for that usb jig.
You can always try, pull out battery, hold power for 10 second, put battery back in and try to boot.
Click to expand...
Click to collapse
Thanks a lot. i tried it but did not help. Can you please tell me what may have gone wrong?
Re: [Q] Please HELP!! Phone Bricked
usb jig man.
I've seen a couple of these cwm tempering, didn't end well.
Warranty? if the jig doesn't work then claim it.
What went wrong?
Seems that those wipes & mounting didn't help.
Could also be hardware.
Sent from the little guy
Re: [Q] Please HELP!! Phone Bricked
use download mode then flash a firmware
Sent from my GT-I9100 using xda app-developers app
Um, pretty sure the OP said the phone won't properly boot at all (I.E no download mode). Oh, look. They did. In their OP
OP - Jig probably won't work but you may as well try it. If it doesn't possibly JTAG repair (if it can be JTAG'd) or motherboard replacement by service centre or 2nd hand board from broken/'donor' phone.
MistahBungle said:
Um, pretty sure the OP said the phone won't properly boot at all (I.E no download mode). Oh, look. They did. In their OP
OP - Jig probably won't work but you may as well try it. If it doesn't possibly JTAG repair (if it can be JTAG'd) or motherboard replacement by service centre or 2nd hand board from broken/'donor' phone.
Click to expand...
Click to collapse
Thanks a lot.
I think its time to visit the service centre. Cant think of anything else.
There's a thread in General where people have listed themselves & offer to lend people their jigs. Have a look, there might be someone near you who can lend you theirs, will save you waiting for one if you buy it online. Definitely try one before you give up tho, you never know - it might just work.
Thanks.. have tried contacting a few people in my region. lets c what happens.
for anyone looking for a USB jig, here is the link to the thread which lists people around the world from whom you can borrow one.
http://forum.xda-developers.com/showthread.php?t=1891197
For info on how to use the Jig.
http://forum.xda-developers.com/showthread.php?t=1402286
docZ12 said:
Thanks.. have tried contacting a few people in my region. lets c what happens.
for anyone looking for a USB jig, here is the link to the thread which lists people around the world from whom you can borrow one.
http://forum.xda-developers.com/showthread.php?t=1891197
For info on how to use the Jig.
http://forum.xda-developers.com/showthread.php?t=1402286
Click to expand...
Click to collapse
usb jig doesnt work on JB boot loaders
we can still try it if u wish
if u live in mumbai u could come over n we could have a look.. (sent a pm)
if its still in warranty id recommend trying to get it replaced rather than JTAG ... make sure u dont say anything about a custom flash
it first looked like a soft brick ...switch off ur phone n keep for sometime (battery removed)
then insert but dont let it boot ... and charge ur battery
after that try booting into recovery or download
Solved
hey guys.. I gave my phone to the Samsung service center to claim my warranty. After making sure that there was no liquid or physical damage they kept my phone for 2 days. Got it back in a perfect working condition. They changed the motherboard.. Lucky Me.
Thanks to all of u for ur help.:good:
docZ12 said:
hey guys.. I gave my phone to the Samsung service center to claim my warranty. After making sure that there was no liquid or physical damage they kept my phone for 2 days. Got it back in a perfect working condition. They changed the motherboard.. Lucky Me.
Thanks to all of u for ur help.:good:
Click to expand...
Click to collapse
Good for u!
Please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II
Related
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
This is Dev section , please post in general section !!
Sent from my LG-P500
Sorry - Can a mod please move this to the correct place.
Don't u have warranty???
Sent from my LG-P500 using Tapatalk
I bricked my phone the same way.
I was trying to flash the original russian Gingerbread with LGMDP and there was a cable connection problem... I chose to erase all data before flashing (EFS Erase ALL). If only mobile devices had BIOS...
No hope, unfortunately. You have to connect your chipset to a computer and manually write all data... Or send to LG Service Center. Just hope they'll fix it for free... (They can't detect how you wiped device's boot loader if all the flash memory is empty)
paulrgod said:
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
Click to expand...
Click to collapse
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
shhbz said:
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
Click to expand...
Click to collapse
Thanks for the links - i was working my way through the second one at 3am this morning.. Yes - i've even tried Shaking it
The P500 community has produced some wonderful guides and looking at it seems like the device is almost impossible to Brick completely, just how this happened i havn't a clue, seems ive managed the almost impossible..
I'd more than likely be able to ressurect it if it responded to anything at all - but no power, and nothing when the USB is inserted, no vibration, no lights, no signs of life...
the phone may be under warranty, but ive got to dig out the reciept - and i cant even begin to think where that is..
Well anyway i've had to buy her a replacement today - ended up with a Samsung Galaxy Mini as they dont stock the Optimus one anymore. Closest thing i could find.
Cheers for the help guys - i guess next effort will be warranty repair.
dude pls try uninstallin all the lg drivers usb etc etc and then try it again...it happend to me but ive still managed to ressurect it so try this and after send it to warranty
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
Ok guys so basically I bricked my phone again. Please read through the whole thing before replying anything.
So basically this is what happened:
-I had XperiaTized v7 patched rom flashed, everything working fine
-I tried legend 7 or something and flashed. It was pretty buggy.
-So I flashed this: http://forum.xda-developers.com/showthread.php?t=1437426&highlight=recovery I flashed the GB one first
-I booted and guess what I still had legend 7.
-So I flashed Froyo recovery which was attached on the same post to see how it was; I was curious and never tried froyo before I heard battery life was quite okay.
-So I booted to find that legend 7 was STILL there. In case you dunno, the recovery zips actually overide CWM so I'm left with the stock recovery.
-So I was like ah wth and I used the file manager provided by legend 7 to delete some useless files on the sd card.
-So I rebooted and to try to flash CWM but it got stuck on the samsung screen. (I actually pressed reboot to recovery on the power menu)
-I panicked and I pressed the home button nothing happened.
-I held the power button to try to restart but same thing happened.
-I removed the batt and went to charge cuz I realised it was quite low after flashing the last 3.
-When I plugged it in the the screen lit up but I was not greeted with the usual power icon.
-I unplugged after a few minutes and tried to boot. The screen lit up a bit but nothing happened. I'm really panicking now. It's quite a new phone. Please help I'm like pulling my hair out now.
PS I know there's a way to get to download using the keys but I don't have cooper.ops cuz all the download links are dodgy. If anyone has the file please let me have it all the roms I have I flashed through CWM.
Help will be greatly appreceated!
when u turn ur fone on, got the 'Samsung GT-S5830' ?
Check [TUTORIAL] How to upgrade, root, flash Recovery & Custom ROM Samsung Galaxy Ace S5830
xHackell said:
when u turn ur fone on, got the 'Samsung GT-S5830' ?
Click to expand...
Click to collapse
No. Now it's just blank screen. It lights up but no words on it
Sharief said:
Check [TUTORIAL] How to upgrade, root, flash Recovery & Custom ROM Samsung Galaxy Ace S5830
Click to expand...
Click to collapse
As I've already mentioned I can't get the cooper.ops file and although I have kies enabled I turn on/off USB debugging as my phone cant even turn on.
jleonnn said:
As I've already mentioned I can't get the cooper.ops file and although I have kies enabled I turn on/off USB debugging as my phone cant even turn on.
Click to expand...
Click to collapse
Check the PM!
now after unplug I get the samsung screen, the one that you see before entering recovery but it freezes there
Just a quick question. If I do send it to the Samsung Service Centre to get the board replaced, how much will it cost and how long will it take? Sentrax is helping me out with the unbricking but if I really can't do it I'll send it to the service centre
jleonnn said:
Just a quick question. If I do send it to the Samsung Service Centre to get the board replaced, how much will it cost and how long will it take? Sentrax is helping me out with the unbricking but if I really can't do it I'll send it to the service centre
Click to expand...
Click to collapse
Maybe you will be billed for repair maximum the same price of new ace , if you honest to samsung officer. Or free if you said,bla-bla, sudenly my phone stop working (at the end you get oscar, become movie actor, kidding ).
What? Billed the price of a new ace just to replace the board? Might as well just get a new one!
jleonnn said:
What? Billed the price of a new ace just to replace the board? Might as well just get a new one!
Click to expand...
Click to collapse
As I said, if you honest to samsung service center officer that you bricked your phones because installing custom rom make your waranty void.
Imho, price of board wont far from new ace price, because main components phone assembly are lcd, board, battery and casing. You can weight cost of these component.
Hint
Can you enter dowmload mode?Maybe you can use odin and repair it.
Yup that's what I'm couting on.
Unbricked it
Sent from my GT-S5830 using XDA
ODIN - our mobile GOD.
sorry for stupid question...did u ever wipe ur ace..?
My Galaxy S2 won't turn on.....!!!!
Yesterday I tried to flash new android version using Odin 3.7. It got stuck on half way and the phone restarted, which never turned on again... No download mode n recovery mode either....
Please help me guys...
There is no Warranty.. I really appreciate if someone can explain the steps, so that I can do it myself.
Thanks in Advance....
Please don't reply with Jtag n USB jig because I don't have these devices.... And I don't think I can get one here in Qatar. I had mailed skander who own a jig in Qatar but no reply... :/ :/ :/
Hello,
Are you sure that it's charged? Leave it in charge fore 10 mins and then try recovery or download mode.
You know, you can create a jig by yourself if you have a proper working USB-cable. Look for guides for this
Other things i don't know, then only a motherboard replacement can fix it.
If you hadn't flashed anything unofficial, would you still have warranty? Cause i "had" warranty when i hardbricked my (rooted) gt-i9100 and they still fixed it...
Thanks for the reply.
TheMasterOfToast said:
Hello,
Are you sure that it's charged? Leave it in charge fore 10 mins and then try recovery or download mode.
You know, you can create a jig by yourself if you have a proper working USB-cable. Look for guides for this
Other things i don't know, then only a motherboard replacement can fix it.
If you hadn't flashed anything unofficial, would you still have warranty? Cause i "had" warranty when i hardbricked my (rooted) gt-i9100 and they still fixed it...
Click to expand...
Click to collapse
I really appreciate your reply. I had charged it for more than 3 hours.. but still not turning on... Can you give me a good guide on making the USB jig....
mhh.... but I think I need to get a soldering iron too....
Here is the guide: http://forum.xda-developers.com/showthread.php?p=24974232
I saw that you still need some other stuff for this to work, like a resistor etc.. Don't know if you have access to this stuff but..
GOOD LUCK!
Hi there,
Firstly sorry if I have posted in the wrong place, i'm not too good with forums and or technology. About two weeks ago, my sister had passed me down her old Samsung Galaxy S2 which she had been using for more than a year. She's had no problems with it what so ever. Up until today, I was browsing the internet, when the internet 'app' crashed and gave me a pop up saying 'internet browser has stopped responding' or something to that affect. It then followed by a black screen where I was not able to do nothing apart from stare at the screen. I popped out the battery, waited a couple of minutes and put it back in. The screen came on with the Samsung logo, but nothing happened from there on, it was frozen. So I repeated the process one more, and now the phone does not turn on at all! I really hope someone can help me out here.
The phone has never been rooted/flashed or had anything done with it.
I have tried leaving the battery out for a couple of hours, still nothing.
I've also swapped batteries and nothing happened.
Tried booting in recovery/download mode and nothing happened either.
I've also tried connecting it to my PC where nothing happens.
I'm hoping someone can help me here, I've only had the phone for two weeks and it's already broken! My sister had it for a year and no problems! Bump.
Thanks in advance,
So can you boot into recovery or download mode? Without either of those two there's nothing you can do apart from take it to a service centre. If you have download mode then you can flash a stock ROM using Odin.
Else, do you have warranty still as it's a year old? If you do, take it to the service centre under warranty.
Sent from a galaxy far, far away
Tried a Jig to see if it enters Download mode?
"To err is human, to forgive is divine."
Sent from my SGS II
make sure ur battery points are not loose .. recently a user tried everything and lastly came to know that the 3 points were loose...
Man calm down try d combi 1st
Keep power home n vol up pressed it'll switch on then off then wil boot in recovery keep it pressed til it boots in rcvry.
Try dis n post will b helpful for helping
Hit thanks if I helped u
A click for u but rep for me
Sent from my Rooted LT26i using xda premium
Hopper8 said:
So can you boot into recovery or download mode? Without either of those two there's nothing you can do apart from take it to a service centre. If you have download mode then you can flash a stock ROM using Odin.
Else, do you have warranty still as it's a year old? If you do, take it to the service centre under warranty.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Hi, no I can't boot in to download more or recovery mode, and the phone is out of warranty.
Thanks anyway.
immortalneo said:
Tried a Jig to see if it enters Download mode?
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
Sorry if I sound like a noob, but what is a jig?
Thanks
Are you sure it's out of warranty? Samsung offers a 2 year warranty in some countries (afaik everywhere in the EU)
My Wife says I'm a phone geek.....
I'd have to agree.....
Click the link in my signature and look at the section for 'no download mode'.. Try that section. Some users report being able to boot into download mode after trying those things.
Edit: And look on eBay for 'i9100 usb jig'. Its a way of attempting to force into download mode
Sent from a galaxy far, far away
Hopper8 said:
Click the link in my signature and look at the section for 'no download mode'.. Try that section. Some users report being able to boot into download mode after trying those things.
Edit: And look on eBay for 'i9100 usb jig'. Its a way of attempting to force into download mode
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Thanks for the quick reply, unfortunately none of those methods worked for me, i'll try the USB jig and report back. If that doesn't work i'm guessing the motherboard is the problem right? Is Samsung able to repair the phone for me even if its out of warranty but with a cost? If so, how much do you think it will cost?
Thanks
You tried all of them in 15 minutes? Give them another go, it can take a few goes sometimes if you don't get it quite right. Otherwise, yes try the jig, but don't pin your hopes on it. Yes, they can repair it. The other (cheaper) option is to buy a handset with broken screen off eBay or similar and switch your motherboard. I'm sorry, I don't know the costs :/
Sent from a galaxy far, far away
Hopper8 said:
You tried all of them in 15 minutes? Give them another go, it can take a few goes sometimes if you don't get it quite right. Otherwise, yes try the jig, but don't pin your hopes on it. Yes, they can repair it. The other (cheaper) option is to buy a handset with broken screen off eBay or similar and switch your motherboard. I'm sorry, I don't know the costs :/
Sent from a galaxy far, far away
Click to expand...
Click to collapse
A little solution
Plug in ur usb to the PC as the device is off....it should remain off for this...
Plug in and see if its charging via pc.....As for it to charge..it has to go through the repair which happens internally without you need to do anything...
A triangle should appear before charging icon appears..As it appears,, just right after that flash ur rom via odin disconnect dont boot now wait n again do the usb charging trick.....
Then boot it should probably be working up again..Well it worths for a try.......
Do it n post it.
Tried rooting my s2 using odin. went into download mode then connected the phone. and clicked start. according to the instructions for rooting from youtube , it said the phone would restart after it said PASS on Odin. After it showed PASS it didnt restart even after a very longtime. so i disconnected.
Now i get the samsung logo with a triangle below. I m able to go to download mode.
Pls help guys
vixter991 said:
Tried rooting my s2 using odin. went into download mode then connected the phone. and clicked start. according to the instructions for rooting from youtube , it said the phone would restart after it said PASS on Odin. After it showed PASS it didnt restart even after a very longtime. so i disconnected.
Now i get the samsung logo with a triangle below. I m able to go to download mode.
Pls help guys
Click to expand...
Click to collapse
Did you check the AUTO REBOOT option in Odin? Did you try to remove the battery for a couple of minutes and reboot?
Yellow triangle is normal
PLEASE READ THE FAQ said:
Q4: When I turn my phone on, I see a yellow triangle. What is it and how can I get rid of it?
It will appear if you have flashed a non-official kernel from download mode. If you flash kernels using CWM recovery, Mobile Odin etc. you won't get this yellow triangle.
The easiest ways to remove it are to use the app Triangle Away OR use a USB Jig.
Click to expand...
Click to collapse
Aello said:
Did you check the AUTO REBOOT option in Odin? Did you try to remove the battery for a couple of minutes and reboot?
Yellow triangle is normal
Click to expand...
Click to collapse
yes auto reboot was checked. and i did remove the battery. What else can i do ?
ADDICT.ANK said:
Man calm down try d combi 1st
Keep power home n vol up pressed it'll switch on then off then wil boot in recovery keep it pressed til it boots in rcvry.
Try dis n post will b helpful for helping
Hit thanks if I helped u
A click for u but rep for me
Sent from my Rooted LT26i using xda premium
Click to expand...
Click to collapse
Hi there:
I had bought the device in June 2011
I had the same problem about 7 months back and did as you suggested, was able to recover the firmware.
Now, I am facing the same problem today, my device started and was stuck on the Samsung Galaxy S2 logo.
Did the same thing again, the animated android logo appeared, and after some time the device was off.
I have been trying to get the device to switch on , but to no avail, the device is not even powering ON.
Device info: Unrooted , OS: 4.1.2
Please advice. Kindly treat this as urgent.
Many thanks in advance.
Best regards,
Siddharth
sharma_sid said:
I have been trying to get the device to switch on , but to no avail, the device is not even coming to (switched off)
charging mode
Click to expand...
Click to collapse
Phone not booting at all/charging/no signs of life = Samsung service centre or local mobile repair shop for diagnosis. Nothing anyone here can suggest beyond that if the phone won't even bootloop or be in a state where it's 'user fixable'.
sharma_sid said:
Hi there:
I had bought the device in June 2011
I had the same problem about 7 months back and did as you suggested, was able to recover the firmware.
Now, I am facing the same problem today, my device started and was stuck on the Samsung Galaxy S2 logo.
Did the same thing again, the animated android logo appeared, and after some time the device was off.
I have been trying to get the device to switch on , but to no avail, the device is not even powering ON.
Device info: Unrooted , OS: 4.1.2
Please advice. Kindly treat this as urgent.
Many thanks in advance.
Best regards,
Siddharth
Click to expand...
Click to collapse
Sorry For the late reply.
I guess, you need to boot in recovery
with home + power+vol up
and clear data and reboot
if that doesnt help.
try booting in download mode again and flash the firmware.
but let it charge first.
and post here
ADDICT.ANK said:
Sorry For the late reply.
I guess, you need to boot in recovery
with home + power+vol up
and clear data and reboot
if that doesnt help.
try booting in download mode again and flash the firmware.
but let it charge first.
and post here
Click to expand...
Click to collapse
Tried everything , the phone is not even powering ON.
I checked with service center , they are asking INR 8000 to replace the motherboard.
I'm instead thing of buying S4, should I ?
please advice guys.
My phone is dead too...
I left it on (functioning normally) and went for a bath, when I got out it was dead...
From functioning ok to nothing in a few minutes, I don't have any idea why. Is it really the motherboard?
Fact: Electronics breaks. All the time. All electronics.
MJDdeLacerda - Take it to a local mobile repair shop for diagnosis, unless you're experienced with this type of electronics, nothing you can do.