Please Some one Guide What Firmware is Suitable for Following Galaxy S2 I9100GSMH ??
Under Battery Its Written :
Model : I9100
SSN : i9100GSMH
Made in Korea
Before 4.1.2 update phone was working but after i have flashed I9100XXLSJ_I9100OXXLS1_OXX.zip then Network is Gone and Now IMEI is converted to Samsung's Generic IMEI 004999010640000 i have tried Galaxy S2 Repair But its not working.
Can someone guide me What Firmware i should use According to My I91000GSMH Model ???
i have no idea about the country and region of phone.
Please Help.
That's the international version, plaine I9100.
Backed EFS folder up?
Sent from the little guy
gastonw said:
That's the international version, plaine I9100.
Backed EFS folder up?
Sent from the little guy
Click to expand...
Click to collapse
"Backed EFS folder up?"
i cant get above line..What you trying to say ??
Thanks.
If you made an EFS folder back up.
Sent from the little guy
The guides/tutorials are in the General section in one thread & easily found. Off you go, you have a lot of reading to do.
gastonw said:
That's the international version, plaine I9100.
Backed EFS folder up?
Sent from the little guy
Click to expand...
Click to collapse
gastonw said:
If you made an EFS folder back up.
Sent from the little guy
Click to expand...
Click to collapse
No i have not made any backup.
everything flashed out.
Can you suggest which ROM suits my version of galaxy s2 ??
currently i am onI9100XXLSJ_I9100OXXLS1_OXX.zip 4.1.2 version.
Phone is running but IMEI is samsung's generic imei and Facing "Not Registered on Network" Problem.
That's the thing......ALWAYS make an EFS folder back up.
You never unlocked it?
Get s2_repair and see if you can get it to work.
No ROM back up either?
Sent from the little guy
gastonw said:
That's the thing......ALWAYS make an EFS folder back up.
You never unlocked it?
Get s2_repair and see if you can get it to work.
No ROM back up either?
Sent from the little guy
Click to expand...
Click to collapse
i was on 2.3.6 when i received that phone and i was unlocked and working very well.
but after i have updated the phone then all things gone !!!
Because i don't know which ROM is suitable for my i9100 version.
i have downloaded 4.1.2 and flashed blindly without knowing prerequisites.
Just get that app I mentioned.
Sent from the little guy
gastonw said:
Just get that app I mentioned.
Sent from the little guy
Click to expand...
Click to collapse
Yes i have tried s2_repair but its not working.
can you please suggest Correct Firmware,CSC and Kernel that can be flashed on i9100GSMH ??
Thanks.
It's not about the firmware, it's about tge EFS folder.
Where did you get your phone (country)?
Branded? if yes what carrier?
Sent from the little guy
gastonw said:
It's not about the firmware, it's about tge EFS folder.
Where did you get your phone (country)?
Branded? if yes what carrier?
Sent from the little guy
Click to expand...
Click to collapse
its from hongkong
unlocked?
I'm drunk right now so I won't be able to get the right ROM for you so go to sammobile.com and look for a hong kong based ROM, GB.
Sent from the little guy
Start rooting i9100, with wierd kernel
[SOLVED]
Hey, I have read a few articles, but im worried about bricking my phone.
_____________________________
My phone is stock, I only updated the firmware with Samsung Kies
In the back of my phone says:
Model: GT-i9100
SSN: i9100GSMH
On the about phone menu says:
Model number: GT-i9100
Android version: 4.0.4
Baseband version: i9100BULP8
Kernel version:
3.0.15-1056084
[email protected] #3
SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Build number: IMM76D.BULPG
_________________________________________
I whant to do this properly, but I don't know how...
Questions:
1- Is my phone the International version one?
2- The LPG (in bold) is what matters to the CFRoot, or what does matter?
3- The "CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.zip" doesn't fit my phone because of the sgs2 and LPQ?
4- Can you find me a suitable CFRoot?
5- If I put the Siyah insted, what shoul be the version?
6- Do I need to use ODIN with Siyah?
Please answer all of my questions
Sorry if my English isn't the best, im not a native speaker.
Yes, international version it is.
Try ExynosAbuse app from chainfire for rooting.
If you perform any wipes, you might brick you phone because of the brickbug. You can check your chip with Got Brickbug app from playstore.
If you wanna flash siyah, yes, get the tar version and flash with odin.
Sent from the little guy
Hitman07 said:
Questions:
1- Is my phone the International version one?
2- The LPG (in bold) is what matters to the CFRoot, or what does matter?
3- The "CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.zip" doesn't fit my phone because of the sgs2 and LPQ?
4- Can you find me a suitable CFRoot?
5- If I put the Siyah insted, what shoul be the version?
6- Do I need to use ODIN with Siyah?
Please answer all of my questions
Sorry if my English isn't the best, im not a native speaker.
Click to expand...
Click to collapse
I shall answer what remains...
2. Yes, that is what matters.
3. It doesn't fit ur phone because of LPQ. You should be looking for something like "CF-Root-SGS2_BU_***_LPG-*.zip". SGS2 is short for the I9100.
4. You're kidding right?
5. Siyah kernels are based on ur android version. For 4.0.4, you should go for v5.0.1.
Also read about eMMC Brickbug issue on 4.0.4.
Personally, I say u forget about CF kernels, because on 4.0.4 they have a high risk of the brickbug. Either flash siyah or go for exynosabuse.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
I shall answer what remains...
4. You're kidding right?
Sent from my SGS II
Click to expand...
Click to collapse
about that... I dind't express myself correctly, what I meant was: If you can find me a CFRoot suitable for my phone (not for me ).
but it is no longer necessary, I already put the siyah, and it is working properly.
Well, thank you so much, your help was much apreciated.
Great support
Hitman07 said:
about that... I dind't express myself correctly, what I meant was: If you can find me a CFRoot suitable for my phone (not for me ).
but it is no longer necessary, I already put the siyah, and it is working properly.
Well, thank you so much, your help was much apreciated.
Great support
Click to expand...
Click to collapse
Lol..
Good to hear that!
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Related
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
daxgirl said:
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
wargrafix said:
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
Click to expand...
Click to collapse
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
slimlo said:
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
Click to expand...
Click to collapse
Essentially flashing using a 4.04 firmware will brick the phone? or is it when I flash, it will be bad to flash using a 4.04 firmware? Sooo confused.
If anyone has the steps what I should do, please tell me. I am worried about bricking.
If I root the phone, when official JB comes out, will I be able to update?
any help guys? The thread isn't very clear what do I do if I have this kernal. Do I downgrade before rooting?
Insted of flashing that Cf root kernel with Odin or Cwm, flash Siyah 4.1.5.
www.gokhanmoral.com
Sent from my GT-I9100
The link, do I root with those? if I do, what will it change?
wargrafix said:
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
Click to expand...
Click to collapse
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
ZDQ said:
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
Click to expand...
Click to collapse
If GotBrickbug app by CF said your chip is safe than it shouldn't matter what kernel you use. Safe hardware.
Personally I always prefer rooting with CF kernels that match my FW version. Then if you're still unsure about the chip... flash siyah, go to advanced (while still in recovery) > reboot recovery. Then wipe data with siyah kernel just to be on the safe side. I always keep siyah 3.5.2 (the first transisiontl ics/jb kernel) for those purposes. CM10 built in kernels are all considered safe so that's the last time you'll ever be worried about it.
Best of luck, man
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
wargrafix said:
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
Click to expand...
Click to collapse
your phone will be rooted and u can then choose to install a custom kernel like Siyah v 4.1.5 on ur phone which gives u the latest CWM recovery thro which u can install any custom rom of ur choice(meant for i9100 though) on ur phone
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
wargrafix said:
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
Click to expand...
Click to collapse
Samsung releases firmware in various regions and with varied carriers. So I bet that till it is officially released it will take time but when it does you will get OTA if your are on 'STOCK' ROM. but if you move away to custom rom then you will have to update manually.
Sent from my GT I-9100 with CM10 JellyBean L.O.V.E. via Tapatalk 2
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
wargrafix said:
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
Click to expand...
Click to collapse
To revert back assuming you didn't do backup before, download 4.0.4 firmware for your region on sammobile and flash it using odin.. Then to upgrade it when official update are up just hit OTA, kies, or flash it via odin the same way like you flash 4.0.4..
If you don't have idea how to flash then google it, theres plenty much tutorials out there.. hope it helps
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
wargrafix said:
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
Click to expand...
Click to collapse
Actually I get confused myself hehe, by "Flash using CF, or CM 10" you mean flash what? The rest are ok..
Well, let's put this simple, Flash the CF-Root for your phone then you're rooted now, if you want to flash custom rom such as cm10 then flash it (the cm10 zip file to be flashed on recovery mode and don't forget to read the cm10 instruction before & after flashing), if you want to get rid of the triangle then do it with triangle away, finally to unroot and revert to stock, just flash stock firmware via odin..
Hi everyone! I just rooted my phone and it was sooo easy.
Thank you so much. Your advice and help definitely made it much easier than I though.
Yeah, welcome to the rooted world where you can explore more with your phone
Sent from my GT-I9100
Hi everyone,
I’m new to this forum and not an expert in android but i really need your help so i’ll try to make this post the best i can. Last week I bought a galaxy s2 unlocked but unfortunately it was rooted and with a leaked rom of android 4.0.3 (XXLPH), I wanted to return it to stock so I followed this tutorial (http://forum.xda-developers.com/showthread.php?t=1650919) and also did this (http://forum.xda-developers.com/showthread.php?p=22669088#post22669088) because my lockscreen wasn’t working. But now I am having some troubles:
-Sometimes (today was the third time this week) I lose service and mi imei doesn’t appear when I type *#06#, also it says base band “unknown” in settings but it’s strange because if I remove the battery and put it back again everything works fine again. Does this have to do with my EFS folder? Is there a way to check if it’s corrupted?
-When I connect it to the pc and open kies, it says:
“Your device’s current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LPZ / PHONE:LPH /CSC:LP5 (XXX)”
I thought it was the csc but I checked using *#272*IMEI# and it says “Sales Code: ARO” which I think it’s correct because I’m in Argentina, I also used a code to check the PCode (not this one *2767*4387264636# because it didn’t work, I can’t remember which one) and it said “PCode: NOT ACTIVE” do you think that’s the problem?
Also in settings my serial number shows “00000000” I don’t know if this is related but I’m trying to give you all the information I can.
Sorry if my English is not the best but I speak Spanish, I’m trying to do my best. Any help will be really appreciated!
More details:
GT-I9100
Android 4.0.4
Baseband: I9100UHLPH
Kernel: 3.0.15-1133289 [email protected] #3 SMP PREEMPT
Build: IMM76D.UHLPZ
PDA: I9100UHLPZ
PHONE:I9100UHLPH
CSC:I9100AROLP5
Anyone? Please help!
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
gastonw said:
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
Click to expand...
Click to collapse
Thank you very much! I'll read everything and let you know.
All right i read everything now what should i do?
nahuedu said:
All right i read everything now what should i do?
Click to expand...
Click to collapse
you can start by checking if you got the brick bug, since you are on 4.0.4, with got brickbug app.
If you have an insane chip, flash siyah kernel via odin / mobile odin.
What ROM you wanna flash?
Download hc ktool from store, so you can back up EFS folder.
Sent from the little guy
Ok, so I installed the emmc brickbug app and it says I have an insane chip.
Now I have to root it like this http://forum.xda-developers.com/showthread.php?t=1501719 so I can backup my EFS folder with hc ktool, is this correct? I don’t want to do anything stupid.
Should I also check the memory blocks with the brick bug app?
I would like to flash this rom
I9100UHLPS
Base Firmware: I9100UHLPS (4.0.3)
Region: South America
Country Argentina
Carrier: Unbranded
Build Date: 12 June 2012
Modem: UHLPG
CSC: AROLP4
Change List: 709483
Is it necessary to flash siyah kernel? I would like it to be 100% stock.
You have to flash siyah in order to avoid the brick bug.
Once you flash it you'll be off the hook and flash anything you want.
Don't you wanna try official jelly bean? Don't worry about you being in argentina, it'll work just fine.
You could flash siyah via mobile odin, no brick risk involved.
Sent from the little guy
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
nahuedu said:
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
Click to expand...
Click to collapse
Siyah will get you rooted, then you can go backing things up, like EFS.
Watch some youtube vids first, just type i9100 siyah.
After that, get back here and read a thing or two about flashing and stuff at the Q&A section and the guides posted above.
One more thing, enter *#06# in the dialer and see if the imei number matches the imei number below the battery.
Sent from the little guy
Yes, I entered *#06# and the imei number is the same as the one on the back of the battery.
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
nahuedu said:
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
Click to expand...
Click to collapse
Yeap, triangle away will remove that and reset binary counter.
You can go on and flash JB now
Sent from the little guy
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
nahuedu said:
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
Click to expand...
Click to collapse
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
gastonw said:
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
Click to expand...
Click to collapse
Nah I'll just update it with kies when it comes out in my country.
nahuedu said:
Nah I'll just update it with kies when it comes out in my country.
Click to expand...
Click to collapse
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
gastonw said:
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
Click to expand...
Click to collapse
Unbranded!
nahuedu said:
Unbranded!
Click to expand...
Click to collapse
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
gastonw said:
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
Click to expand...
Click to collapse
But NO WIPING right?
Quick question. I have the following I9100 model:
PDA: I9100XWLPW
Phone: I9100XXLQ6
CSC: I9100OXXLPU
I9100LKAAUT
Its Switzerland model, since JB is not out for this specific model, can I for example flash I9100XWLPW from India with Odin? Or does the CSC and Phone matter.
BTW its open/contract free phone.
Get uk or some euro countries from sammobile.com
Sent from my GT-I9100 using xda app-developers app
CeBits said:
Quick question. I have the following I9100 model:
PDA: I9100XWLPW
Phone: I9100XXLQ6
CSC: I9100OXXLPU
I9100LKAAUT
Its Switzerland model, since JB is not out for this specific model, can I for example flash I9100XWLPW from India with Odin? Or does the CSC and Phone matter.
BTW its open/contract free phone.
Click to expand...
Click to collapse
Where are you? Suisse or India?
If in India, you may have a problem with the modem (signal).
Sent from the little guy
gastonw said:
Where are you? Suisse or India?
If in India, you may have a problem with the modem (signal).
Sent from the little guy
Click to expand...
Click to collapse
Neither lol I am in Macedonia. We have GSM 900/1800 and 3G 1900/2100, but since the Swiss S2 is working just fine here I assumed other EU rom will match this radio. I will try later, i have the stock 4.04 just in case.
I will try Germany. I also have nandroid backup.
Successfully flashed the German open firmware, everything is fine since I am doing this as a favor to my friend, do you guys recommend factory reset after the update or only if there are problems? There were couple of FC's on the first boot, but it seems fine now.
Always do a factory reset, it can't never hurt.
Sent from the little guy
And please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II
Hmm, you seem to have sane chip for stock 4.0.4, very lucky considering you've already done nandroid backup
You are free to do wahtever you want, but read before acting
Kaldsud said:
Hmm, you seem to have sane chip for stock 4.0.4, very lucky considering you've already done nandroid backup
You are free to do wahtever you want, but read before acting
Click to expand...
Click to collapse
Nope, its the insane mmc i checked with the app. But restoring nandroid with CWM 5+ shouldn't trigger the bug afaik. Anyway its on JB kernel now and as I understood it doesn't suffer the superbrick bug with this kernel.
Hi, I have given my wife my old white S2 after deciding to get a black one for myself (from Amazon UK). I had managed to root it and put on an aokp 4.2.2 rom (aokp_i9100_jb-mr1_build6 )which works great although I can't remember which site I used for the instructions. So I get my new black one and start thinking about doing the same...
I thought it would be a good idea to update it to latest stock version to start with but OTA update says my phone is up to date.
KIES finds new firmware but it hangs at 100% complete and goes nowhere.
Here are some numbers:-
Version 4.0.4
Baseband Version i900 BULP8
Build No. IMM76D.BULPG
This BULP8 version looks a bit odd.
I would appreciate some advice on how to proceed...is this a "funny" version?
Here's hoping, alfie
alfienoakes63 said:
Hi, I have given my wife my old white S2 after deciding to get a black one for myself (from Amazon UK). I had managed to root it and put on an aokp 4.2.2 rom (aokp_i9100_jb-mr1_build6 )which works great although I can't remember which site I used for the instructions. So I get my new black one and start thinking about doing the same...
I thought it would be a good idea to update it to latest stock version to start with but OTA update says my phone is up to date.
KIES finds new firmware but it hangs at 100% complete and goes nowhere.
Here are some numbers:-
Version 4.0.4
Baseband Version i900 BULP8
Build No. IMM76D.BULPG
This BULP8 version looks a bit odd.
I would appreciate some advice on how to proceed...is this a "funny" version?
Here's hoping, alfie
Click to expand...
Click to collapse
What do you want to do ?
Sorry, perhaps I wasn't clear.
I want to root it and install aokp 4.2.2 rom.
alfienoakes63 said:
Sorry, perhaps I wasn't clear.
I want to root it and install aokp 4.2.2 rom.
Click to expand...
Click to collapse
To Root you device, flash one of these Custom Kernels: CF-Root (the best) - PhilZ - SpeedMod
To install AOKP 4.2.2 ROM: Flash Omega v12 or Android Open Kang Project or JellyBAM
To install AOSP 4.2.2 ROM: Flash CyanogenMod 10.1
And don't forget to hit the thanks button
Also....while you're running 4.0.4, DO NOT wipe data, cache or dalvik....
Search "emmc brickbug" for why....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Yeah, you csn run gotbrick bug from playstore to check your chip. If it's sane you're good, if it's not I advice you to flash a safe kernel (siyah v5).
And then you'll be good to go for flashing CM and s#!t.
Also, stick to xda, not other sites.
Sent from the little guy
thanks everyone I'll check it all out later today and report back. (My chip is "sane")
alfienoakes63 said:
thanks everyone I'll check it all out later today and report back. (My chip is "sane")
Click to expand...
Click to collapse
At times even the so called 'Sane' becomes 'Insane', so flash a brick bug free kernel like 'Siyah v5.0.1" from 'ODIN' to ensure safety on recovery wipes
I'm feeling a bit confused and dim...I've read so many threads...
I found these Philz files
PhilZ-cwm6-BULPG-ATL-3.99-signed.zip
PhilZ-cwm6-BULPG-ATL-3.99.tar.md5
The BULPG seems to match my phone - but which one do I use?
Or, if I going to use siyah I need more detailed instructions... argrrh..please help
First is for recovery second for odin
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
alfienoakes63 said:
I'm feeling a bit confused and dim...I've read so many threads...
I found these Philz files
PhilZ-cwm6-BULPG-ATL-3.99-signed.zip
PhilZ-cwm6-BULPG-ATL-3.99.tar.md5
The BULPG seems to match my phone - but which one do I use?
Or, if I going to use siyah I need more detailed instructions... argrrh..please help
Click to expand...
Click to collapse
May be its time for u to do some Reading in the first place ( since ur confused for now to choose a kernel properly to flash )
Head to the link below and start reading the same for now
http://forum.xda-developers.com/showthread.php?t=1125282
Good luck !
hmm reading I've done, it's understanding that is the problem.
I thought I'd managed it, I had it rooted with the Philz file and tried installing the aokp 4.2.2 rom but now it won't boot at all... I fear I've done something terrible.
I can boot to the "Philz Touch 3" recovery screen.
EDIT : Update Re-installed the ROM and now I'm up and running thanks everyone, alfie
alfienoakes63 said:
EDIT : Update Re-installed the ROM and now I'm up and running thanks everyone, alfie
Click to expand...
Click to collapse
Good for u!
Please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II
Hello
i test to rooter my samsung galaxy S2, JHA browsed several forum to read the various tutorials, I think as including JHA steps a do, crashes just on the choice of files!
1 / what cfroot take? that of the pasante band which is: i9100 XXKF1 or that of the version number is : 2.6.35.7 - I9100JPKF3
2 / How can I pass has the android 4.1.2 version? without kies because kies does not give me the hand to do!
3 / information question: can i change gingerbread TO ics?
miles thanks you for your help
A +
mobra31 said:
Hello
i test to rooter my samsung galaxy S2, JHA browsed several forum to read the various tutorials, I think as including JHA steps a do, crashes just on the choice of files!
1 / what cfroot take? that of the pasante band which is: i9100 XXKF1 or that of the version number is : 2.6.35.7 - I9100JPKF3
2 / How can I pass has the android 4.1.2 version? without kies because kies does not give me the hand to do!
3 / information question: can i change gingerbread TO ics?
miles thanks you for your help
A +
Click to expand...
Click to collapse
Am guessing u want to know how to root ur phone, right?
And as for ur questions:
1. Which CF root to choose for JPKF3?
2. How to flash 4.1.2?
3. Can u change from GB to ICS?
Right?
If that's the case, please tell us if u want GB, ICS or JB 4.1.2?
To flash 4.1.2, or to update GB to ICS, download a stock firmware from sammobile.com and flash it using Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
Neo, you're starting to sound like me.
And you don't wanna be me
Sent from the little guy
gastonw said:
Neo, you're starting to sound like me.
And you don't wanna be me
Sent from the little guy
Click to expand...
Click to collapse
Hello
I want to keep GB and pass a version 4.1.2 of ANDROID
and also my samsung S 2 rooter
If it is possible to tell me to download files
Thank you
Well, let's see.
You're on GB and you wanna go JB.
You also wanna root it.
Now, do you want the fast & safe way?
If not, you're gonna have to do some reading.
Well, you should do some reading anywat, starting with doomslord one-click root.
Sent from the little guy
gastonw said:
Well, let's see.
You're on GB and you wanna go JB.
You also wanna root it.
Now, do you want the fast & safe way?
If not, you're gonna have to do some reading.
Well, you should do some reading anywat, starting with doomslord one-click root.
Sent from the little guy
Click to expand...
Click to collapse
Hello
the reading I do since at least d them weeks, but as I'm new, so I preferred not to risk!
Start for the root if you will allow me:
you correct me if I slip next:
my phone version is the JPKF3
so I must take the insecure version or original located on this link?
http://Forum.xda-developers.com/showthread.php?t=1101671
This is for rooter and have more option in admin I guess
Once the root perform, will be the jeely bean android 4.1.2 version
thanks from me enlighten
Kind regards
A +
As I said, start reading about doomslord one click root.
Being new doesn't cut it, we can guide you but you gotta have, at least, a slighest idea of what you are doing.
Sent from the little guy
gastonw said:
As I said, start reading about doomslord one click root.
Being new doesn't cut it, we can guide you but you gotta have, at least, a slighest idea of what you are doing.
Sent from the little guy
Click to expand...
Click to collapse
hi
thanks , i have rooted my phonne with doomslord , the is very simple , lot of thanks for you !
i dont know where the room for passing in android 4.1.2
see you
Get Mobile odin from play store. If you want that app to root your device while flashing it, get the pro version.
Visit sammobile.com for 4.1.2 ROMs or the official jelly bean thread sticked in the general forum.
Sent from the little guy
It's not too clear for me, I am a novice in the field
you have been of great help to me, it will be good to continue (thank you)
I'll Flash jellly bean version 4.1.2
1 / once the flash set, file cfroot take to the rooter again, since after a 4.1.2 I lose the root I do yesterday!
2 / esct can I recover my data with a backup that I do with kies before when I was with the 2.3.3?
or so it will take any reinstall to recover my data
Thanks for your help
Why don't you do it as I suggested?
It's easier.
Anyway, don't use kies to back up, use titanium back up pro.
Sent from the little guy
evening
its ok i have now flashing my phonne and update to jelly bean version 4.1.2 by rom with one files md5 EXTENSION
i am happy because a have found all my data after flash !
now i go to root the smatphone !
all my thnaks for you
:good:
Here: http://forum.xda-developers.com/showthread.php?t=2116549
Sent from the little guy
hi
just few minutes and the pass root its ok !
i have root by siyahkernel for s2 and its ok now, just organized the widjet and other appliquations
100000 thanks for you
see you
:laugh: