Quick question. I have the following I9100 model:
PDA: I9100XWLPW
Phone: I9100XXLQ6
CSC: I9100OXXLPU
I9100LKAAUT
Its Switzerland model, since JB is not out for this specific model, can I for example flash I9100XWLPW from India with Odin? Or does the CSC and Phone matter.
BTW its open/contract free phone.
Get uk or some euro countries from sammobile.com
Sent from my GT-I9100 using xda app-developers app
CeBits said:
Quick question. I have the following I9100 model:
PDA: I9100XWLPW
Phone: I9100XXLQ6
CSC: I9100OXXLPU
I9100LKAAUT
Its Switzerland model, since JB is not out for this specific model, can I for example flash I9100XWLPW from India with Odin? Or does the CSC and Phone matter.
BTW its open/contract free phone.
Click to expand...
Click to collapse
Where are you? Suisse or India?
If in India, you may have a problem with the modem (signal).
Sent from the little guy
gastonw said:
Where are you? Suisse or India?
If in India, you may have a problem with the modem (signal).
Sent from the little guy
Click to expand...
Click to collapse
Neither lol I am in Macedonia. We have GSM 900/1800 and 3G 1900/2100, but since the Swiss S2 is working just fine here I assumed other EU rom will match this radio. I will try later, i have the stock 4.04 just in case.
I will try Germany. I also have nandroid backup.
Successfully flashed the German open firmware, everything is fine since I am doing this as a favor to my friend, do you guys recommend factory reset after the update or only if there are problems? There were couple of FC's on the first boot, but it seems fine now.
Always do a factory reset, it can't never hurt.
Sent from the little guy
And please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II
Hmm, you seem to have sane chip for stock 4.0.4, very lucky considering you've already done nandroid backup
You are free to do wahtever you want, but read before acting
Kaldsud said:
Hmm, you seem to have sane chip for stock 4.0.4, very lucky considering you've already done nandroid backup
You are free to do wahtever you want, but read before acting
Click to expand...
Click to collapse
Nope, its the insane mmc i checked with the app. But restoring nandroid with CWM 5+ shouldn't trigger the bug afaik. Anyway its on JB kernel now and as I understood it doesn't suffer the superbrick bug with this kernel.
Related
Intratech said:
XWKE2
Firmware info
PDA:XWKE2
PHONE: XXKDJ
Build date: 06/05/2011
Generic XEU (UK): http://www.multiupload.com/1EFM4RBMGZ
Click to expand...
Click to collapse
I know there are a number of "Debranding" threads but I really don't want to brick my SGS2. I've not quite had my SGS2 for a week but am guessing I have an old firmware which is Vodafone branded, I want to debrand my SGS2 so I can get more recent updates but this is all new to me. I'm not new to Android as I had a Rooted and BL unlocked SE X10i but it's the differences in firmware etc of the SGS2 which confuses me.
This is my "About phone" info:
Model number
GT-I9100
Android version
2.3.3
Baseband version
I9100BUKG1
Kernel version
[email protected] #2
Build number
GINGERBREAD.BUKG2
Am I right in saying this is older firmware and if I flash it with Odin it will debrand my SGS2 and will I be able to get further updates either via OTA or Kies, is the above quoted firmware correct or should I use another??
Thanks for any help, Jason.
Anybody, please??
Swyped from my GT-I9100 using Tapatalk
Root the phone using CF Root and then flash one of the many custom ROMS available, i recommend 'CheckROM Revolution'.
Thanks for the reply fella, I might try a custom ROM at a later date as it's all I used in my Xperia X10i but for now I want to keep my SGS2 stock.
I have flashed a stock ROM.
PDA: I9100XWKI4
PHONE: I9100XXKI4
CSC: I9100XEUKH2
Now when I connect to Kies it says "Unable to update this version" and under CSC it says I9100XEUKH2(VOD) which I'm assuming means vodafone?
I even flashed a generic XEUKH2 CSC package hoping it would remove the VOD and Kies would be able to update my phone, still the same though.
Any advice please??
Swyped from my GT-I9100 using Tapatalk
So after more reading I think I've found the issue, it's my SGS2's product code? (I9100LKAVOD)
Pretty sure I know the answer to this but is there any way to change the product code??
Swyped from my GT-I9100 using Tapatalk
JayJ-1974 said:
So after more reading I think I've found the issue, it's my SGS2's product code? (I9100LKAVOD)
Pretty sure I know the answer to this but is there any way to change the product code??
Swyped from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
To change csc type *#272*IMEI# and it should allow you choose csc, please note this will wipe your phone, not 100% sure but I think it wipes your storage aswell so please check and back everything up
Thanks but will this remove the VOD product code so I can update via Kies??
Swyped from my GT-I9100 using Tapatalk
Solved it, once the ROM had been flashed with Odin you need to do a factory reset via recovery!
I'm now running XEU CSC and Kies recognises my phone and now does not say "cannot be updated".
WARNING- A FACTORY RESET WILL WIPE ALL USER DATA, BACK UP OR DO A NANDROID BACK UP. I did an advanced data restore via CWM, worked like a charm.
Swyped from my GT-I9100 using Tapatalk
Don't know why you unbranded, vodafone has the latest updated before unbranded phones, xeu is still waiting for 2.3.5
Sent from my GT-I9100 using xda premium
Not when I started this thread, I was on 2.3.3 and no update available. I'm happy with a debranded/unbranded phone, am running 2.3.4 atm and I'm sure Sammy will release 2.3.5 soon and if not I can either flash a Vodafone branded ROM or a Frankenstein ROM.
Typical though, I solve this and Vodafone comethrough. Sods law!! lol
I just did an eMMC check for my 2 weeks old S3 and found out that my chip type is VTU00M and FWRev is 0xF7 .
I know the affected version is VTU00M 0xF1 , but is my chip affected too? what are my options?
I'v never rooted before, just came into Android so I'm waiting till JB 4.1.2 is released to my region officially.
Thanks!
Hi,
I'd say your chip is affected and i'd reccomend rooting + flashing a custom ROM to be safe.
It's quite easy to root at the moment and i'd reccomend using this method (galaxy s3 toolkit):
http://forum.xda-developers.com/showthread.php?t=1703488
Just make sure you read and you'll be fine, it basically tells you what you need to do and what order to do it in.
The application does all the hard stuff for you.
you don't have to root or flash a custom ROM.
you can flash the latest stock firmware from sammobile.com
Glebun said:
you don't have to root or flash a custom ROM.
you can flash the latest stock firmware from sammobile.com
Click to expand...
Click to collapse
I decided to flash the latest stock firmware, but my country is not there when I checked for new firmware, My country is Qatar BTW, so what should I do now? Saudi Arabia is stated and have the newest version (XXELLB), what will happen if I downloaded it and flash it to my phone? and how should I flash a manually download firmware to my phone? I checked on Kies but 4.1.4 is still not available for me.
Another quick question, I'm currently in Sri Lanka but I brought my phone from Qatar, but still I would get updates from Qatar even-though my region is changed right?
Thanks!
Rikmk90 said:
Hi,
I'd say your chip is affected and i'd reccomend rooting + flashing a custom ROM to be safe.
It's quite easy to root at the moment and i'd reccomend using this method (galaxy s3 toolkit):
http://forum.xda-developers.com/showthread.php?t=1703488
Just make sure you read and you'll be fine, it basically tells you what you need to do and what order to do it in.
The application does all the hard stuff for you.
Click to expand...
Click to collapse
I'm sorry if I;m being rude, but how is my phone affected? would you please explain?
is the FWrev 0xF7 is affected too?
rockler said:
I decided to flash the latest stock firmware, but my country is not there when I checked for new firmware, My country is Qatar BTW, so what should I do now? Saudi Arabia is stated and have the newest version (XXELLB), what will happen if I downloaded it and flash it to my phone? and how should I flash a manually download firmware to my phone? I checked on Kies but 4.1.4 is still not available for me.
Another quick question, I'm currently in Sri Lanka but I brought my phone from Qatar, but still I would get updates from Qatar even-though my region is changed right?
Thanks!
Click to expand...
Click to collapse
the region doesn't really matter.
The latest one is ZSEMA1
Glebun said:
the region doesn't really matter.
The latest one is ZSEMA1
Click to expand...
Click to collapse
cannot find ZSEMA1......is it for International versions of the S3? would you post a link for this latest firmware please?
rockler said:
I'm sorry if I;m being rude, but how is my phone affected? would you please explain?
is the FWrev 0xF7 is affected too?
Click to expand...
Click to collapse
There is really no confirmation directly from samsung which EMMC are safe or not. It is said that only 0XF1 are affected by sds. To be honest I am also confused on all this safe or not safe thing. To be safe, let's assume that all EMMC are unsafe and just updated to latest firmware.
Sent from my Galaxy Nexus using Tapatalk 2
Hi everyone,
I’m new to this forum and not an expert in android but i really need your help so i’ll try to make this post the best i can. Last week I bought a galaxy s2 unlocked but unfortunately it was rooted and with a leaked rom of android 4.0.3 (XXLPH), I wanted to return it to stock so I followed this tutorial (http://forum.xda-developers.com/showthread.php?t=1650919) and also did this (http://forum.xda-developers.com/showthread.php?p=22669088#post22669088) because my lockscreen wasn’t working. But now I am having some troubles:
-Sometimes (today was the third time this week) I lose service and mi imei doesn’t appear when I type *#06#, also it says base band “unknown” in settings but it’s strange because if I remove the battery and put it back again everything works fine again. Does this have to do with my EFS folder? Is there a way to check if it’s corrupted?
-When I connect it to the pc and open kies, it says:
“Your device’s current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LPZ / PHONE:LPH /CSC:LP5 (XXX)”
I thought it was the csc but I checked using *#272*IMEI# and it says “Sales Code: ARO” which I think it’s correct because I’m in Argentina, I also used a code to check the PCode (not this one *2767*4387264636# because it didn’t work, I can’t remember which one) and it said “PCode: NOT ACTIVE” do you think that’s the problem?
Also in settings my serial number shows “00000000” I don’t know if this is related but I’m trying to give you all the information I can.
Sorry if my English is not the best but I speak Spanish, I’m trying to do my best. Any help will be really appreciated!
More details:
GT-I9100
Android 4.0.4
Baseband: I9100UHLPH
Kernel: 3.0.15-1133289 [email protected] #3 SMP PREEMPT
Build: IMM76D.UHLPZ
PDA: I9100UHLPZ
PHONE:I9100UHLPH
CSC:I9100AROLP5
Anyone? Please help!
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
gastonw said:
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
Click to expand...
Click to collapse
Thank you very much! I'll read everything and let you know.
All right i read everything now what should i do?
nahuedu said:
All right i read everything now what should i do?
Click to expand...
Click to collapse
you can start by checking if you got the brick bug, since you are on 4.0.4, with got brickbug app.
If you have an insane chip, flash siyah kernel via odin / mobile odin.
What ROM you wanna flash?
Download hc ktool from store, so you can back up EFS folder.
Sent from the little guy
Ok, so I installed the emmc brickbug app and it says I have an insane chip.
Now I have to root it like this http://forum.xda-developers.com/showthread.php?t=1501719 so I can backup my EFS folder with hc ktool, is this correct? I don’t want to do anything stupid.
Should I also check the memory blocks with the brick bug app?
I would like to flash this rom
I9100UHLPS
Base Firmware: I9100UHLPS (4.0.3)
Region: South America
Country Argentina
Carrier: Unbranded
Build Date: 12 June 2012
Modem: UHLPG
CSC: AROLP4
Change List: 709483
Is it necessary to flash siyah kernel? I would like it to be 100% stock.
You have to flash siyah in order to avoid the brick bug.
Once you flash it you'll be off the hook and flash anything you want.
Don't you wanna try official jelly bean? Don't worry about you being in argentina, it'll work just fine.
You could flash siyah via mobile odin, no brick risk involved.
Sent from the little guy
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
nahuedu said:
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
Click to expand...
Click to collapse
Siyah will get you rooted, then you can go backing things up, like EFS.
Watch some youtube vids first, just type i9100 siyah.
After that, get back here and read a thing or two about flashing and stuff at the Q&A section and the guides posted above.
One more thing, enter *#06# in the dialer and see if the imei number matches the imei number below the battery.
Sent from the little guy
Yes, I entered *#06# and the imei number is the same as the one on the back of the battery.
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
nahuedu said:
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
Click to expand...
Click to collapse
Yeap, triangle away will remove that and reset binary counter.
You can go on and flash JB now
Sent from the little guy
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
nahuedu said:
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
Click to expand...
Click to collapse
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
gastonw said:
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
Click to expand...
Click to collapse
Nah I'll just update it with kies when it comes out in my country.
nahuedu said:
Nah I'll just update it with kies when it comes out in my country.
Click to expand...
Click to collapse
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
gastonw said:
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
Click to expand...
Click to collapse
Unbranded!
nahuedu said:
Unbranded!
Click to expand...
Click to collapse
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
gastonw said:
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
Click to expand...
Click to collapse
But NO WIPING right?
Hi!
I have searched this forum and readed all FAQ-s, bus still can't figure what to do in my case. Hope You can help me
So, my phone is
PDA: I9100XWLP7
Phone: I9100XXLPS
CSC: I9100EPLLP5
with ICS 4.0.3 (now rooted with CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5).
My problem is buggy bluetooth stack. I have even didn't notice any problem with bluetooth until buing new car radio with bluetooth (Sony DSX-A50BT). After paring this whit my phone all works well .... but only for 10-15 minutes. After this connection is reset and music player on phone stops. After some searching on the web, I have found that this kind of problem are typical for ICS 4.0.3 and some users reports they resolved it by upgrade to 4.0.4. Ok, but my problem is, that there is no official upgrade available for my phone! (via Kies).
I think is due to strange PDA code "LP7". I thing it is strange because it first letter should code year of production (L means 2012) and second letter should code mount (A for January, B for February etc.) But what mount is for P? (last mouth, December is L )
So I need a little help in answering question: could I safely flash stock ROM with ICS 4.0.4 intended for other PDA?
Could I do the same with some custom ROM?
Or maybe there is another way for fixing my buggy bluetooth? (I have read that some user fixed this problem by replacing four bluetooth related files in his ICS 4.0.3 phone with files extracted from ICS 4.0.4. Unfortunately they didn't say how to extract those files and neither what files he replaced!)
Thanks in advance for any suggestions.
elk84 said:
Hi!
So I need a little help in answering question: could I safely flash stock ROM with ICS 4.0.4 intended for other PDA?
Could I do the same with some custom ROM?
Or maybe there is another way for fixing my buggy bluetooth?
Click to expand...
Click to collapse
You can find all official firmwares from sammobile.com.
Yes, you can flash any stock ICS 4.0.4 or custom ROM as long as you are sure its meant for ur device i9100 and there is no carrier branding.
But why go for ICS 4.0.4 when you can flash JB 4.1.2?
"To err is human, to forgive is divine"
Sent from my SGS II
yeah...you don't wanna go 4.0.4.....
Sent from the little guy
immortalneo said:
You can find all official firmwares from sammobile.com.
Yes, you can flash any stock ICS 4.0.4 or custom ROM as long as you are sure its meant for ur device i9100 and there is no carrier branding.
But why go for ICS 4.0.4 when you can flash JB 4.1.2?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thank you for your replay, but how could I be sure about this? I mean "there is no branding". I bought my phone over internet and it has no carrier software or logos, but I didn't know for sure.
BTW. Did JB 4.1.2 has reliable bluetooth?
elk84 said:
Thank you for your replay, but how could I be sure about this? I mean "there is no branding". I bought my phone over internet and it has no carrier software or logos, but I didn't know for sure.
BTW. Did JB 4.1.2 has reliable bluetooth?
Click to expand...
Click to collapse
That means ur phone is not carrier branded.
JB 4.1.2 has a lot more fixes and features than ICS 4.0.4. I suggest you give it a try first.
And some 4.0.4 kernels are affected by the 'brickbug', so u might wanna be careful too.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
That means ur phone is not carrier branded.
Click to expand...
Click to collapse
On sammobile web site I can find exact match for my phone as "Germany E-Plus". Did it means it is branded? (But on the phone itself I can't find any items from this particular carrier).
What can be consequences of flasing generic stock ROM on a branded phone? (I have risked and flashed my phone anyway - it seems all is ok, but I want do the same for my wife and my daugthers phones but they phones are definitively branded!)
UPDATE: Bluetooth problem seams to go away, but now I'm experiencing sleep of death.
Please Some one Guide What Firmware is Suitable for Following Galaxy S2 I9100GSMH ??
Under Battery Its Written :
Model : I9100
SSN : i9100GSMH
Made in Korea
Before 4.1.2 update phone was working but after i have flashed I9100XXLSJ_I9100OXXLS1_OXX.zip then Network is Gone and Now IMEI is converted to Samsung's Generic IMEI 004999010640000 i have tried Galaxy S2 Repair But its not working.
Can someone guide me What Firmware i should use According to My I91000GSMH Model ???
i have no idea about the country and region of phone.
Please Help.
That's the international version, plaine I9100.
Backed EFS folder up?
Sent from the little guy
gastonw said:
That's the international version, plaine I9100.
Backed EFS folder up?
Sent from the little guy
Click to expand...
Click to collapse
"Backed EFS folder up?"
i cant get above line..What you trying to say ??
Thanks.
If you made an EFS folder back up.
Sent from the little guy
The guides/tutorials are in the General section in one thread & easily found. Off you go, you have a lot of reading to do.
gastonw said:
That's the international version, plaine I9100.
Backed EFS folder up?
Sent from the little guy
Click to expand...
Click to collapse
gastonw said:
If you made an EFS folder back up.
Sent from the little guy
Click to expand...
Click to collapse
No i have not made any backup.
everything flashed out.
Can you suggest which ROM suits my version of galaxy s2 ??
currently i am onI9100XXLSJ_I9100OXXLS1_OXX.zip 4.1.2 version.
Phone is running but IMEI is samsung's generic imei and Facing "Not Registered on Network" Problem.
That's the thing......ALWAYS make an EFS folder back up.
You never unlocked it?
Get s2_repair and see if you can get it to work.
No ROM back up either?
Sent from the little guy
gastonw said:
That's the thing......ALWAYS make an EFS folder back up.
You never unlocked it?
Get s2_repair and see if you can get it to work.
No ROM back up either?
Sent from the little guy
Click to expand...
Click to collapse
i was on 2.3.6 when i received that phone and i was unlocked and working very well.
but after i have updated the phone then all things gone !!!
Because i don't know which ROM is suitable for my i9100 version.
i have downloaded 4.1.2 and flashed blindly without knowing prerequisites.
Just get that app I mentioned.
Sent from the little guy
gastonw said:
Just get that app I mentioned.
Sent from the little guy
Click to expand...
Click to collapse
Yes i have tried s2_repair but its not working.
can you please suggest Correct Firmware,CSC and Kernel that can be flashed on i9100GSMH ??
Thanks.
It's not about the firmware, it's about tge EFS folder.
Where did you get your phone (country)?
Branded? if yes what carrier?
Sent from the little guy
gastonw said:
It's not about the firmware, it's about tge EFS folder.
Where did you get your phone (country)?
Branded? if yes what carrier?
Sent from the little guy
Click to expand...
Click to collapse
its from hongkong
unlocked?
I'm drunk right now so I won't be able to get the right ROM for you so go to sammobile.com and look for a hong kong based ROM, GB.
Sent from the little guy
Start rooting i9100, with wierd kernel
[SOLVED]
Hey, I have read a few articles, but im worried about bricking my phone.
_____________________________
My phone is stock, I only updated the firmware with Samsung Kies
In the back of my phone says:
Model: GT-i9100
SSN: i9100GSMH
On the about phone menu says:
Model number: GT-i9100
Android version: 4.0.4
Baseband version: i9100BULP8
Kernel version:
3.0.15-1056084
[email protected] #3
SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Build number: IMM76D.BULPG
_________________________________________
I whant to do this properly, but I don't know how...
Questions:
1- Is my phone the International version one?
2- The LPG (in bold) is what matters to the CFRoot, or what does matter?
3- The "CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.zip" doesn't fit my phone because of the sgs2 and LPQ?
4- Can you find me a suitable CFRoot?
5- If I put the Siyah insted, what shoul be the version?
6- Do I need to use ODIN with Siyah?
Please answer all of my questions
Sorry if my English isn't the best, im not a native speaker.
Yes, international version it is.
Try ExynosAbuse app from chainfire for rooting.
If you perform any wipes, you might brick you phone because of the brickbug. You can check your chip with Got Brickbug app from playstore.
If you wanna flash siyah, yes, get the tar version and flash with odin.
Sent from the little guy
Hitman07 said:
Questions:
1- Is my phone the International version one?
2- The LPG (in bold) is what matters to the CFRoot, or what does matter?
3- The "CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.zip" doesn't fit my phone because of the sgs2 and LPQ?
4- Can you find me a suitable CFRoot?
5- If I put the Siyah insted, what shoul be the version?
6- Do I need to use ODIN with Siyah?
Please answer all of my questions
Sorry if my English isn't the best, im not a native speaker.
Click to expand...
Click to collapse
I shall answer what remains...
2. Yes, that is what matters.
3. It doesn't fit ur phone because of LPQ. You should be looking for something like "CF-Root-SGS2_BU_***_LPG-*.zip". SGS2 is short for the I9100.
4. You're kidding right?
5. Siyah kernels are based on ur android version. For 4.0.4, you should go for v5.0.1.
Also read about eMMC Brickbug issue on 4.0.4.
Personally, I say u forget about CF kernels, because on 4.0.4 they have a high risk of the brickbug. Either flash siyah or go for exynosabuse.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
I shall answer what remains...
4. You're kidding right?
Sent from my SGS II
Click to expand...
Click to collapse
about that... I dind't express myself correctly, what I meant was: If you can find me a CFRoot suitable for my phone (not for me ).
but it is no longer necessary, I already put the siyah, and it is working properly.
Well, thank you so much, your help was much apreciated.
Great support
Hitman07 said:
about that... I dind't express myself correctly, what I meant was: If you can find me a CFRoot suitable for my phone (not for me ).
but it is no longer necessary, I already put the siyah, and it is working properly.
Well, thank you so much, your help was much apreciated.
Great support
Click to expand...
Click to collapse
Lol..
Good to hear that!
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II