Hi guys,
I am trying to help a friend unlock his tablet.
He is using a Iconz 7 inch tablet (never heard of this manufacturer) on Android 4.0.3.
His problem is that his son played with it, probably with lock patterns, and now ICS is asking for his gmail acc to unlock the tablet.
He has no clue what gmail acc he registered on the device. I thougt to go in the boot mode and do a factroy reset, but I can not enter it, I have tried many combination of Power button and volume keys but nothing seems to work.
Help pls
Hallo I wont to root that tablet i push power and v+ and then only see broking android image and nathing else pleas help me i wont give this tablet to my son but i cant put in setup bicose he wonts a password and i dont now what ist that:crying: :crying:
No worries
woren said:
Hallo I wont to root that tablet i push power and v+ and then only see broking android image and nathing else pleas help me i wont give this tablet to my son but i cant put in setup bicose he wonts a password and i dont now what ist that:crying: :crying:
Click to expand...
Click to collapse
You have to reset it so find small hole marked RESET on the back of the device and whit thin object just type reset for a few seconds and then turn on the device then wait few minutes and will be well
Binatone appstar
Hi, my neighbour has asked if i could help with this binatone appstar 7 inch tablet. They have had it for sometime now but as the kids have now got proper android tablets they have all forgotten the pin number to access the tablet.
I have tried to reset the devise by pressing a pin into the reset hole on the back, holding it there or 10 seconds then letting it boot up as normal but it still requires a pin number to go further.
I tried to enter recovery mode so i could do a factory reset/wipe but thats a no go because...
I hold down vol + & power, as the appstar boot logo appears i let go of the power, after a short while the screen changes to an android upright with a blue hexagon behind it but then in an instant that changes to an android on its back with its belly open and a red triangle and exclamation mark. After that i am unable to do anything.
Hopefully someone might beable to help with this. So thank you in advance
A Solution for you all
I have a solution for this problem, if the parents password is lost/forgotten just enter into the password box exactly:
Code:
1orEnt=
This is tested and working on the AppStar 7" tablet from Binatone.
Say thanks if this helped you
PM
This only works on the settings not on parent mode and that is wha I'm locked out of ...any ideas ?
hey guys.
i have a tablet and its Gmail lock becuse i forgot the password and tried too many times.. now i want to delete all from recovery[Wipe All].
but the tablet have ONLY POWER BUTTON AND RESET BUTTON and i dont know how to get into recovery...!!!
i serched the all internet and didn't found a way to get in recovery.
all i can get is the "Mass Storage Mode" for transfer files and thats it {its gose in this mode after i plug and unplug many time in gmail lock screen}!!
any one here know how to get into recovery???
i dont know what to do...LEASE HELP!!!!!
Tablet: CROWN CR7A10-RK Tablet PC Android 4.1 8GB SH: H2013057A10RK
????
still have that problem... help??
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account
I've spent hours trying to figure out how to get out of the boot loop but nothing works. I just get the logo on the screen. I wanted to flash a new os image to the rom, but now my computer cannot find the device at all. As an FYI, it has no volume button for doing a hard reset, it has a power button, an esc button and a reset pinhole. I have not found a combination that will get me out of this loop! HELP! (ps not a complete noob when it comes to computers but not far from it)
thanks in advance for any help/advice you can give me
Need a bit more info to try and be helpful
gunnsgalore said:
I've spent hours trying to figure out how to get out of the boot loop but nothing works. I just get the logo on the screen. I wanted to flash a new os image to the rom, but now my computer cannot find the device at all. As an FYI, it has no volume button for doing a hard reset, it has a power button, an esc button and a reset pinhole. I have not found a combination that will get me out of this loop! HELP! (ps not a complete noob when it comes to computers but not far from it)
thanks in advance for any help/advice you can give me
Click to expand...
Click to collapse
What tool(s) did you use to try and flash it (presume PhoenixSuite) ?
Where did the image(s) come from and for what device(s) were they originally targeted?
Do you by ANY chance have the stock recovery image? If so, you could try to re-flash IT and at least get back to a device that will BOOT.