[Q] Binatone appstar - Android Q&A, Help & Troubleshooting

Hallo I wont to root that tablet i push power and v+ and then only see broking android image and nathing else pleas help me i wont give this tablet to my son but i cant put in setup bicose he wonts a password and i dont now what ist that:crying: :crying:

No worries
woren said:
Hallo I wont to root that tablet i push power and v+ and then only see broking android image and nathing else pleas help me i wont give this tablet to my son but i cant put in setup bicose he wonts a password and i dont now what ist that:crying: :crying:
Click to expand...
Click to collapse
You have to reset it so find small hole marked RESET on the back of the device and whit thin object just type reset for a few seconds and then turn on the device then wait few minutes and will be well

Binatone appstar
Hi, my neighbour has asked if i could help with this binatone appstar 7 inch tablet. They have had it for sometime now but as the kids have now got proper android tablets they have all forgotten the pin number to access the tablet.
I have tried to reset the devise by pressing a pin into the reset hole on the back, holding it there or 10 seconds then letting it boot up as normal but it still requires a pin number to go further.
I tried to enter recovery mode so i could do a factory reset/wipe but thats a no go because...
I hold down vol + & power, as the appstar boot logo appears i let go of the power, after a short while the screen changes to an android upright with a blue hexagon behind it but then in an instant that changes to an android on its back with its belly open and a red triangle and exclamation mark. After that i am unable to do anything.
Hopefully someone might beable to help with this. So thank you in advance

A Solution for you all
I have a solution for this problem, if the parents password is lost/forgotten just enter into the password box exactly:
Code:
1orEnt=
This is tested and working on the AppStar 7" tablet from Binatone.
Say thanks if this helped you
PM

This only works on the settings not on parent mode and that is wha I'm locked out of ...any ideas ?

Related

[Q] Need help to reset passcode on Zophone i5

Hi all,
I need somebody help me to reset passcode lock on Zophone i5 clone. I was set up a passcode lockscreen and I forgot the password so Im stuck for couple of days. i tried to reset button still noting work even do recovery never get to recovery mode by power and + volume just apple logo come up and the boot itself up.Tried so many flash software can't find specific path.that come up.I can answer the phone call but cant get to the home screen. anybody how to sovle this ..Really appriciate. thanks in advance.
veeclement
Start flash new ROM with FlashTool. Press DOWNLOAD than plug your i5 with USB cable and reboot.

[Q] allwinner tech a13

ok so i have one of those cheapo android tablets no make or name on the case took the back of and the chip says allwinner tech 13.
it turns on fine but my daughter put a passcode on it and cant remember it. if i press power and volume down or up cant quite remember all i get is a android bot lying down with its internals open and a red triangle !. and pressing anything does not help it will then continue to boot normaly after some time. so i am unable to hard reset it. there are no reset hole etc can anyone please help me.
thanks callum

Pipo M6 pro donĀ“t start anymore

Hi,
my Pipo M6 per wifi hangs itself while starting, i.e. he gets stuck with the loading picture. Indeed, with the Reset he restarts, however, gets stuck also again. After he gets stuck, he can be also switched off no more, except by Reset.
And I also do not come to the Recovery mode, I thought, maybe helps a new firmware. However, sometimes he registers if I hold the keys while starting low-spirited, that Android little manes with open belly and warning sign. see below.
If I hang him by USB on my Win7 pc, a wrong driver's file is installed constantly, either Samsung or HTC, so that the Flashtools register that no suitable device is connected. With the USB driver of Pipo the pc says that that is no suitable driver's file.
What can I do?
And over again for stupid ones: I come to the Recovery fashion, nevertheless, dur volume press ESC and power at the same time, or?
Please, can anybody help me?
Nobody can help?
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Try one of the 2 methodes
gnom68 said:
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Click to expand...
Click to collapse
A This is the easiest way: Do a HARDRESET
Recovery Mode (for Factory Reset):
-----------------------------------------------------------
1. [Reset] (on the backside)
2. [Power] + [Vol-]
3. green Android shows up
4. press [Vol-] + [Vol+] + [ESC] together till Menu shows up (if it's not showing up try to press it a few once more)
OR
B For advanced users: Flash the original Firmware (download from here it is a very slow download )
and use the howto which is delivered within the downoad.
Maybe you can find some usefull information here
Hope i could help u. For me it was working fine.....

[Q] VivaX TPC-7151 factory reset and recovery help

Hey XDA, you did informed me and help me a lot when I would search for a solution and find it on your forums. But now I had to make account in order to find solution for particular one here (I suppose this is a correct topic, please move if I'm wrong):
I forgot to change a really bad pattern password back to regular slide lock, and I didn't know the combination. After trying few times most combinations that I ha din my head, it suddenly asked me a google account in order to unlock it. Well, I know it, I type it and as soon as I press "sign in", a message flashes that it is loading something (just for a split second) and..... nothing. Still there, at same lock screen. I tried those without @gmail.com and null password but nothing worked, none of combinations. I read somewhere that other solution is wipe data or factory reset. Well, I'm okay with that, but how do I enter recovery mode or boot menu where I can access that?? I don't have USB debugging on, I'm sure of that, and my tablet isn't rooted (it was rooted before, but it went on service once for data wiping and it came back un-rooted I suppose)
I don't have hard reset button, but I do have physical back button on side of tablet that I can click, but I never use it. I tried with holding power button and volume up. When it shows me that image of opened android with red triangle warning sign. I release power button and now I'm stuck with that image on my screen, not knowing what to do! I can press power + volume up again to turn off tablet. Power + volume down activates safe mode and turns on tablet, atleast I discovered that feature...
If you know how to get pass that lock screen that asks for google account, anything how to wipe data with locked out tablet I would be very pleased to hear it (technically see it on here). My tablet is still in its case, locked out, and turned off for now.
Note: If I manage to get to pattern lock screen again somehow, that will also work for me. I'm sure I know correct pattern.
instal moborobo and phoenixSuit go in recovery mode and pres volume ap and power and
Daxmarko said:
Hey XDA, you did informed me and help me a lot when I would search for a solution and find it on your forums. But now I had to make account in order to find solution for particular one here (I suppose this is a correct topic, please move if I'm wrong):
I forgot to change a really bad pattern password back to regular slide lock, and I didn't know the combination. After trying few times most combinations that I ha din my head, it suddenly asked me a google account in order to unlock it. Well, I know it, I type it and as soon as I press "sign in", a message flashes that it is loading something (just for a split second) and..... nothing. Still there, at same lock screen. I tried those without @gmail.com and null password but nothing worked, none of combinations. I read somewhere that other solution is wipe data or factory reset. Well, I'm okay with that, but how do I enter recovery mode or boot menu where I can access that?? I don't have USB debugging on, I'm sure of that, and my tablet isn't rooted (it was rooted before, but it went on service once for data wiping and it came back un-rooted I suppose)
I don't have hard reset button, but I do have physical back button on side of tablet that I can click, but I never use it. I tried with holding power button and volume up. When it shows me that image of opened android with red triangle warning sign. I release power button and now I'm stuck with that image on my screen, not knowing what to do! I can press power + volume up again to turn off tablet. Power + volume down activates safe mode and turns on tablet, atleast I discovered that feature...
If you know how to get pass that lock screen that asks for google account, anything how to wipe data with locked out tablet I would be very pleased to hear it (technically see it on here). My tablet is still in its case, locked out, and turned off for now.
Note: If I manage to get to pattern lock screen again somehow, that will also work for me. I'm sure I know correct pattern.
Click to expand...
Click to collapse
instal moborobo and phoenixSuit go in recovery mode and pres volume ap and power and kommt fabrick restore

Need Help with Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4

Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account

Categories

Resources