I have a AT&T I717, but don't like the AT&T ICS since I cannot use tethering with Bell network. I am not sure if there is any chance to install Bell official ICS on it. I tried Kies on download mode, but if I input my sn and model number SGH-I717M, it always pops up an error message. I am not sure if the OTA works. Do you guys have similar experiences? Thanks.
shaodx said:
I have a AT&T I717, but don't like the AT&T ICS since I cannot use tethering with Bell network. I am not sure if there is any chance to install Bell official ICS on it. I tried Kies on download mode, but if I input my sn and model number SGH-I717M, it always pops up an error message. I am not sure if the OTA works. Do you guys have similar experiences? Thanks.
Click to expand...
Click to collapse
If you have a AT&T i717 chances are you will not get office Bell ICS. There are a few way of getting tethering to work, BTW.
1) Flash official AT&T ICS, use tethering app like FoxFi
2) Flash official AT&T ICS, root it, use hacks such as Ultracfg trick
3) obviously, flash custom ROMs
4) Wait until devs use Canadian ROMs as base*
* P.S. Not seeing that happen soon though since folks already on LF5 or LF6 but Canadian ROMs (at least for Bell) is only on LF4.
You can use TELUS Stock ICS;
http://forum.xda-developers.com/showthread.php?t=1771979
There is NO carrier bloat at all on TELUS ICS.
Much appreciated, guys. I will try the Telus ROM first.
After using odlin to flash boot and system, system halts on Telus LTE page.
No idea if it's caused by AT&T modem because I did not flash it yet.
Anyway, go back to AT&T official ROM and use FoxFi now.
Hello everybody,
My Rogers Lumia 920 (unlocked and pentaband beforehand) was bricked mysteriously overnight and I came across the instructions to unbrick the phone. In my NaviFirm search, I noticed that the Rogers ROMs (releases 1232.2109.1242.1002 i believe) for the RM-820 have disappeared as there are many screenshots of them which were posted a few weeks ago. As a last resort, I flashed the AT&T ROM onto my 920 and I have lost the ability to use my phone on Wind mobile and all other AWS networks. Does anybody by chance have an already downloaded Rogers ROM they could share with me? Are there any other roms for the 920 that don't have the AWS bands disabled?
Thanks in advanced!
TheElse said:
Hello everybody,
My Rogers Lumia 920 (unlocked and pentaband beforehand) was bricked mysteriously overnight and I came across the instructions to unbrick the phone. In my NaviFirm search, I noticed that the Rogers ROMs (releases 1232.2109.1242.1002 i believe) for the RM-820 have disappeared as there are many screenshots of them which were posted a few weeks ago. As a last resort, I flashed the AT&T ROM onto my 920 and I have lost the ability to use my phone on Wind mobile and all other AWS networks. Does anybody by chance have an already downloaded Rogers ROM they could share with me? Are there any other roms for the 920 that don't have the AWS bands disabled?
Thanks in advanced!
Click to expand...
Click to collapse
I just posted links to the Rogers firmware at http://forum.xda-developers.com/showpost.php?p=36686433&postcount=8 .
However, I hate to be the bearer of bad news, but there are reports of the AT&T firmware fully disabling the AWS bands, even if you re-flash the Rogers ROM afterwards. Maybe the posts I've seen are wrong, so by all means give it a try and please let us know the result. :fingers-crossed:
Good Luck!
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
TheElse said:
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
Click to expand...
Click to collapse
After reflashing the rogers rom did you do a factory reset? I really doubt that flashing an at&t rom permanently disables the aws band even after the original rogers rom has been flashed again. That would mean the at&t rom changes a very secure low level area of the phone and it just doesn't seem that likely or anything I've heard of happening before...
TheElse said:
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
Click to expand...
Click to collapse
yea man , same here had a bricked developer phone which I flashed with ATT Rom and now flashed it to Rogers Rom. I am still stuck with Edge on Tmobile :crying:. If only there is a method for a clean installation !
patrick92260 said:
After reflashing the rogers rom did you do a factory reset? I really doubt that flashing an at&t rom permanently disables the aws band even after the original rogers rom has been flashed again. That would mean the at&t rom changes a very secure low level area of the phone and it just doesn't seem that likely or anything I've heard of happening before...
Click to expand...
Click to collapse
By factory reset, do you mean going into about and reset my phone? If so, yep, I tried it and it didn't help recover the aws band. Is there any way to access the system root of the phone, or am I dreaming at this point? Thanks!
TheElse said:
By factory reset, do you mean going into about and reset my phone? If so, yep, I tried it and it didn't help recover the aws band. Is there any way to access the system root of the phone, or am I dreaming at this point? Thanks!
Click to expand...
Click to collapse
Yeah that's what I meant for a reset. The only other way I can even think of getting the AWS back is possibly finding a dialer code that would let you select radio bands. I want to figure this out too b/c I have a sim unlocked at&t lumia that I want to flash the rogers rom to so I can get the AWS band.
patrick92260 said:
Yeah that's what I meant for a reset. The only other way I can even think of getting the AWS back is possibly finding a dialer code that would let you select radio bands. I want to figure this out too b/c I have a sim unlocked at&t lumia that I want to flash the rogers rom to so I can get the AWS band.
Click to expand...
Click to collapse
##3282# (Or ##3282 call) will present you with a thing that lets you change the bands used for 3g and lte, but it doesn't have the aws band (band IV) for selection under 3g D:
TheElse said:
##3282# (Or ##3282 call) will present you with a thing that lets you change the bands used for 3g and lte, but it doesn't have the aws band (band IV) for selection under 3g D:
Click to expand...
Click to collapse
I really have no idea then... But I'm 99% sure after flashing dozens of phones from different companies that the AWS band is not permanently disabled. We just need to find a way to get it back on. Problem is it's probably going to take someone with more technical skills about windows phone 8 (probably searching thru the root directory) to re-enable it.
someone would need to post the baseband of the rogers model and then you can flash the baseband and get your aws band back.
I read somewhere that all the lumias 920 are the same on hardware side, that they only have different softwares and firmware on the inside; rumor has it that if you could get the firmware and baseband that nokia flashes into the dev phones, you could convert any lumia 920 into a dev phone with anything unlocked.
ellokomen said:
someone would need to post the baseband of the rogers model and then you can flash the baseband and get your aws band back.
I read somewhere that all the lumias 920 are the same on hardware side, that they only have different softwares and firmware on the inside; rumor has it that if you could get the firmware and baseband that nokia flashes into the dev phones, you could convert any lumia 920 into a dev phone with anything unlocked.
Click to expand...
Click to collapse
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
patrick92260 said:
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
Click to expand...
Click to collapse
The AT&T baseband seems to stick though, maybe the AT&T rom has another file that has no equivalent in the rogers ROM that's sole purpose it to lock out the AWS band. Hopefully we can get this fixed soon, I'd love to love the Lumia 920, but at this rate, my eyes are starting to turn to the 8x.
patrick92260 said:
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
Click to expand...
Click to collapse
I don't think the rogers firmware includes the rogers baseband, as the baseband is the one that controls the radios and frequencies of the handset.
One can install a firmware without a baseband and viceversa
ellokomen said:
I don't think the rogers firmware includes the rogers baseband, as the baseband is the one that controls the radios and frequencies of the handset.
One can install a firmware without a baseband and viceversa
Click to expand...
Click to collapse
Hmm, I guess we're basically just hunting for the Rogers baseband then. If only there was a way to browse the system root of a windows phone device D:
TheElse said:
Hmm, I guess we're basically just hunting for the Rogers baseband then. If only there was a way to browse the system root of a windows phone device D:
Click to expand...
Click to collapse
The baseband for my stock at&t 920 with the portico ota is 1.0.202075.3. Someone who has a stock rogers 920 that didn't flash the att rom what is your baseband version? (about - more info) Then we need to compare and see what the baseband is on a rogers phone that has lost the AWS band.
patrick92260 said:
The baseband for my stock at&t 920 with the portico ota is 1.0.202075.3. Someone who has a stock rogers 920 that didn't flash the att rom what is your baseband version? (about - more info) Then we need to compare and see what the baseband is on a rogers phone that has lost the AWS band.
Click to expand...
Click to collapse
I just updated my phone to portico and it seems that I've got the same baseband as you. Can anybody with a stock Rogers ROM post their baseband? After updating, my phone popped up with a new message when I put in my wind sim. It said "Phone mode changes. Your phone is now in GSM mode." I have no idea if you can change modes or anything like that.
Hey guys, I just wanted to jump in here and say that I'm having the same issues. I have a BUILD Dev phone that was bricked -> flashed AT&T -> flashed Rogers and the AWS band is disabled / vanished.
I've contacted Nokia Experts and was told the only option at the moment was to get me a new phone... and I've been waiting for months, lol. I'm thinking that they're going to send me a standard unlocked L920 without AWS bands but that's a bridge I'll cross when or if I get there... I was also told that the repair center did not have the ability to fix this problem and when I asked for the original firmware I was told they (Nokia Experts) did not have it.
Someone HAS to know what's going on here and how to fix it!
If anyone finds a way to get the AWS band back I'm willing to PayPal them $100. Maybe those with more skill will help if we offer financial incentive?
I'm in the US on T-Mobile for reference.
What we need to figure out first is what the baseband is on a stock rogers 920 that has never had the att firmware flashed on it. If it is different then it looks like you'll have to wait this out until nokia comes out with new firmware that has an upgraded baseband and hopefully that brings back the AWS
What about the base band from a Dev device like mine? If the Rogers would work as a reference point then I'd imagine the Dev base band would work too.
There are several users here with them. I can't provide mine because It's been flashed as I mentioned, but I'm currently running 1.0.202075.3 as well as others in this thread.
Onyx Z32 said:
What about the base band from a Dev device like mine? If the Rogers would work as a reference point then I'd imagine the Dev base band would work too.
There are several users here with them. I can't provide mine because It's been flashed as I mentioned, but I'm currently running 1.0.202075.3 as well as others in this thread.
Click to expand...
Click to collapse
Is there a way to port TouchXPlorer to WP8? I think it has access to the system directory on WP7 but I've never actually used it before. That might help us extract the correct baseband.
Hi all,
So, following snickler's excellent instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=2401226
I was able to get my AT&T Lumia 920 up and running on the Rogers official GDR2/Amber ROM with no trouble. Everything's great.
I'm curious (as I'm sure many others are) whether or not anyone has had any luck with moving from the official Rogers GDR2/Amber ROM to the official AT&T GDR2/Amber ROM that was released yesterday.
I've tried flashing the AT&T GDR2/Amber ROM directly over the Rogers ROM I'm running (using NCS), but no luck (invalid product/FFU), and I've also tried flashing back to the AT&T Pre-Portico ROM, but also no luck there (same product/FFU error).
The official Rogers GDR2/Amber ROM is still RM-820, same as AT&T.
Not a huge deal, since the Rogers ROM is great, but it would be nice to know if someone was able to find a way to get back on the AT&T ROM.
Cheers
tamabar said:
Hi all,
So, following snickler's excellent instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=2401226
I was able to get my AT&T Lumia 920 up and running on the Rogers official GDR2/Amber ROM with no trouble. Everything's great.
I'm curious (as I'm sure many others are) whether or not anyone has had any luck with moving from the official Rogers GDR2/Amber ROM to the official AT&T GDR2/Amber ROM that was released yesterday.
I've tried flashing the AT&T GDR2/Amber ROM directly over the Rogers ROM I'm running (using NCS), but no luck (invalid product/FFU), and I've also tried flashing back to the AT&T Pre-Portico ROM, but also no luck there (same product/FFU error).
The official Rogers GDR2/Amber ROM is still RM-820, same as AT&T.
Not a huge deal, since the Rogers ROM is great, but it would be nice to know if someone was able to find a way to get back on the AT&T ROM.
Cheers
Click to expand...
Click to collapse
I'm currently on the ATT Dev Rom, which is great, but was looking to go back to the ATT standard ROM, but have not been able to. My phone won't detect any available update, and NCS gives me the FFU error when trying to flash to it from the DEV ROM.
From the other threads, it was impossible to go back to an ATT standard ROM pre-amber. I got a feeling this may still be the case. I'm not sure if or what I'm missing on the DEV ROM other than some of the "official ATT" apps, but I think I can download those from the store anyways.
I do have data sense, at a glance, and most of the other amber upgrades.
tamabar said:
Hi all,
So, following snickler's excellent instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=2401226
I was able to get my AT&T Lumia 920 up and running on the Rogers official GDR2/Amber ROM with no trouble. Everything's great.
I'm curious (as I'm sure many others are) whether or not anyone has had any luck with moving from the official Rogers GDR2/Amber ROM to the official AT&T GDR2/Amber ROM that was released yesterday.
I've tried flashing the AT&T GDR2/Amber ROM directly over the Rogers ROM I'm running (using NCS), but no luck (invalid product/FFU), and I've also tried flashing back to the AT&T Pre-Portico ROM, but also no luck there (same product/FFU error).
The official Rogers GDR2/Amber ROM is still RM-820, same as AT&T.
Not a huge deal, since the Rogers ROM is great, but it would be nice to know if someone was able to find a way to get back on the AT&T ROM.
Cheers
Click to expand...
Click to collapse
I've tried multiple ways and can't go back to stock ATT. Oh well, the Rogers ROM works great with only one exception, I can't get tethering to work. It tells me there is no data connection available when I DO have data, strange.
deletedeletedeletedelete
are you booting to the recovery mode? if not, this could get you past the product ID check
of course the the firmware should have at least the version that you've installed atm. or higher...
HELP!!!
636_Castle said:
So a while back I downloaded a ROM to get GDR2 on to my AT&T Lumia 920 (RM-820). It rebranded my device to an RM-821. Now I'm unable to flash the stock RM-820 ROM in NCS obviously, because it tells me the ROM I'm trying to flash is for a different kind of device.
Is it now impossible to revert to the stock RM-820 firmware?
Edit:
It seems the problem only occurs when trying to flash to the AT&T firmware, but other RM-820 firmwares work fine. Solved.
Edit 2: It STILL seems it failed some sort of a product ID check when going from the Rogers ROM to the AT&T ROM despite them both being RM-820. That sucks.
Click to expand...
Click to collapse
Hi Mate, I was wondering if you could show me the thread where you can learn to Change the ROM from the 920. I want to flash my local carier's ROM over the AT&T, cus eventhough my AT&T 920 is unlocked, LTE doesn't work at all, only once did, but when I go back to USA, LTE works fine either on AT&T or T-Mobile. So my logic is that if I change the ROM, LTE will work because somehow, this ROM is blocking it and I know RM-820 works with LTE bands 1900 and AWS.
Thank you for your help in advance.
Cheers.
I'm still able to go to recovery mode. So because of this, I can't go back to rm-820? Is there any other way around this?
what happened?
So what happened? i have the same issue went to rm821 and have issues with returning to RM820