I just flashed CM10.1 (23/03/2013) using CWM v6.0.3.0, followed trough every step of the tutorial, the ROM runs just fine but I just can't install gapps. (Trying gapps-jb-20130301-signed.zp)
Here's what i get:
- Finding update package...
- Opening update package...
- Installing update...
- Installing Google Apps for Android 4.2.2..
- Mouting system...
- Copying files...
- Fixing Permissions...
- Unmounting system...
- Installation complete!
Install from sdcard complete.
Then I wipe Dalvik cache, wipe data/factory reset and reboot.
And then... Nothing! It's just not showing up. Can anyone help me out? Am I doing something wrong?
PS.: I also getting that yellow warning sign once i downgraded to CWM v6.0.2.9, as CM10.1 tutorial asked. Any thoughts?
fbodra said:
I just flashed CM10.1 (23/03/2013) using CWM v6.0.3.0, followed trough every step of the tutorial, the ROM runs just fine but I just can't install gapps. (Trying gapps-jb-20130301-signed.zp)
Here's what i get:
- Finding update package...
- Opening update package...
- Installing update...
- Installing Google Apps for Android 4.2.2..
- Mouting system...
- Copying files...
- Fixing Permissions...
- Unmounting system...
- Installation complete!
Install from sdcard complete.
Then I wipe Dalvik cache, wipe data/factory reset and reboot.
And then... Nothing! It's just not showing up. Can anyone help me out? Am I doing something wrong?
PS.: I also getting that yellow warning sign once i downgraded to CWM v6.0.2.9, as CM10.1 tutorial asked. Any thoughts?
Click to expand...
Click to collapse
after installing the Gapps package do not wipe data/factory reset ma8, just wipe Cache/dalvik and then reboot phone
Got an improvement but not quite there yet. Tried to install an older version of gapps (for 4.0 android) and got a message when rebooting ("Unfortuantely, the process com.google.process.gapps has stopped)
Then it got locked on that messagind (it kept looping it around).
So then I went back to CWM and reinstalled updated gapps. Now I got the same message, but the phone booted. I successfully logged in to google account, but every time I reboot my phone I get that same message again.
One more thing. CWM 10.1 don't roll down status bar with updates and I just don't have a lock screen.
Any thoughts?
fbodra said:
Got an improvement but not quite there yet. Tried to install an older version of gapps (for 4.0 android) and got a message when rebooting ("Unfortuantely, the process com.google.process.gapps has stopped)
Then it got locked on that messagind (it kept looping it around).
So then I went back to CWM and reinstalled updated gapps. Now I got the same message, but the phone booted. I successfully logged in to google account, but every time I reboot my phone I get that same message again.
One more thing. CWM 10.1 don't roll down status bar with updates and I just don't have a lock screen.
Any thoughts?
Click to expand...
Click to collapse
all i would suggest is go for a fresh install of Rom and gapps and see. also try to check the MD5 of the dwnld'd zip file does match the one on the dwnld link
Sun90 said:
all i would suggest is go for a fresh install of Rom and gapps and see. also try to check the MD5 of the dwnld'd zip file does match the one on the dwnld link
Click to expand...
Click to collapse
If he doesn't want to follow your advice from your first post, it's his own fault
Sun90 said:
after installing the Gapps package do not wipe data/factory reset ma8, just wipe Cache/dalvik and then reboot phone
Click to expand...
Click to collapse
Thanks I did that, got the Play app working all right, but I only get that one. No navigator, no gmail, no anything else.
Download by yourself
Related
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
Hello,
I have been running liquidsmooth rom on GB for a bit now and I started getting app crashes and random reboots. i went online and found AOCP was highly recommended for the i717. i downloaded this and added to my SD card and was following the instructions i found for installing it. the instructions on the site i was looking at seemed a little odd as it included the wipe of the system dir which no other rom had recommended doing.
i use TWRP as for my recovery and followed these instructions. i wiped cache, dalvik, and system, i even did the factory reset as normal. i was able to install the rom and get it to open up and what not BUT i do not have any gapps installed. i was able to use the web browser and download goo manager and install the gapps but when i open it to setup my acct it keeps crashing. i rebooted my phone into recovery again and wiped cash and restarted. now as soon as the phone boots and i try to go to my home i get the following errors: "Unforunately, setup wizard has stopped." and "Unfortunately, the process com.google.process.gapps has stopped."
I dont know what to do! the rom works fine until i try to install the gapps.
any suggestions would be greatly appreciated!
Google the 20130301 (March 1st) Gapps... Download the zip put it with your ROM zip.. Wipe Cache/Delvik/ then Factory Reset/ Them wipe the system.. Use your TWRP to flash the ROM 1st then The Gapps zip.. Wipe Cache/Delvik ( option on bottom left of screen ).. you may want to consider flashing a JB Modem as well if your AOCP is a Jellybean ROM then reboot...
You didn't mention the ROM you installed. ICS and JB use different gapps. Make sure to match gapps with ROM.
Sent from my SAMSUNG-SGH-I717 using xda premium
Sounds like the gapps file is possibly corrupted or it may be for a different device
Sent from my SAMSUNG-SGH-I717 using xda premium
I flash CM10.1 from this thread
http://forum.xda-developers.com/showthread.php?t=2032900
It's boot normally but i can't use because it show dialog box "Unfortunately, the process com.android.phone has stopped".
i want to solution this.
sorry for my english.
semiauto said:
I flash CM10.1 from this thread
http://forum.xda-developers.com/showthread.php?t=2032900
It's boot normally but i can't use because it show dialog box "Unfortunately, the process com.android.phone has stopped".
i want to solution this.
sorry for my english.
Click to expand...
Click to collapse
You done all this steps?
Install instruction: Before you install, check your baseband. If you are not using the newest(.77), Plz update it. last SONY Official Firmwares(4.1.B.0.587) http://talk.sonymobile.com/thread/35239?tstart=0
Flash boot.img (in the zip)
Install Zip
Install Gapps
Wipe data (do this first and only once and never do it again)
If you done everything right like above, just wipe your cache & dalvik cache & see if it works( or just reflash the rom)
Hi,
owning Galaxy S II (GT-I9100) I tried to flash it to Lolipop 5.1
I downloaded cm-11-20150406-nightly-i1900.zip and ga_gapps-modular-mini-5.1-20150404-signed.zip
whiped data and cache.
Could not wipe dalvic cache, because there was no advanced option available.
Tried to install the nightly.zip
Error Message: E:Error in /tmp/sideload/package.zip (Status 7)
then I tried to install the gapps.zip
Error Message: E:failed to verify whole-file-signature
Now what to do?
Please help!
PS Soory but I accidentally posted also on general XDA Assist
Warthog07 said:
Hi,
owning Galaxy S II (GT-I9100) I tried to flash it to Lolipop 5.1
I downloaded cm-11-20150406-nightly-i1900.zip and ga_gapps-modular-mini-5.1-20150404-signed.zip
whiped data and cache.
Could not wipe dalvic cache, because there was no advanced option available.
Tried to install the nightly.zip
Error Message: E:Error in /tmp/sideload/package.zip (Status 7)
then I tried to install the gapps.zip
Error Message: E:failed to verify whole-file-signature
Now what to do?
Please help!
PS Soory but I accidentally posted also on general XDA Assist
Click to expand...
Click to collapse
First cm11 is not lollipop, its kitkat. But if you want that rom its fine.
It sounds like you have an older recovery. Flash the newest recovery of cwm or philz, or whatever you prefer. Then reboot back into recovery. Also depending on what rom you are coming from you probably need to do a full wipe before you flash those files. Format system, data, wipe cache/dalvik. And I would recommend wipe cache amd dalvik after flashing as well, then reboot into system.
Problems with modding my Galaxy SII
Hi,
ah the first mistake.: I really wanted lollypop ( this was the reason why I started all this) and I looked for it but still got the wrong file
I just went to: download.cyanogenmod.org/?device=i9100&type= and took the latest file.
I still don't get the meaning of getting a new recovery: where do I go for this and how do I do it?
I just switched off my phone and started in recovery mode then wiped the data and the cache.
Could not wipe dalvic cache, because there was no advanced option available???
So how should I do it?
Warthog07 said:
Hi,
ah the first mistake.: I really wanted lollypop ( this was the reason why I started all this) and I looked for it but still got the wrong file
I just went to: download.cyanogenmod.org/?device=i9100&type= and took the latest file.
I still don't get the meaning of getting a new recovery: where do I go for this and how do I do it?
I just switched off my phone and started in recovery mode then wiped the data and the cache.
Could not wipe dalvic cache, because there was no advanced option available???
So how should I do it?
Click to expand...
Click to collapse
First of all, relax.
Second, you can't just go around and blatantly download the latest file you see hoping for it to be a lollipop version rom. You have to read around and actually make sure what it is your downloading. You only get one chance cause if you screw up badly - hardbrick.
BTW, you won't find any lollipop ROMs on that site as there is no longer any official CM roms for S2. You can get unofficial builds from Galaxy S2 Android Development section and also kernels in the same area.
Before you flash a lollipop rom, you must first have a compatible kernel for it. Go around, read in Lollipop rom threads and see if you can find a compatible kernel for lollipop. Then go about and flash your ROM.
Good luck.
Problemss with modding my Galaxy SII
Ok, did my homework.
Installed CWM-based Revovery v6.0.4.5 via odin
Wiped all data and cache partition
Wiped dalvic cache
Installed cm-12.1-20150408-UNOFFICIAL-i9100.zip
installed pa_gapps-modular-mini-5.1-20150404-signed.zip
Everything worked fine
Then tried to reeboot system.
After a while the Samsung Logo with an exclemation mark appeaered and a bit later the last screen (with reboot system now) reappeared and that was it.
Whiped the two caches again - no change.
What did go wrong or what is missing?
When I go to -report error it shows:
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log Please open ROM Manager to report the issue.
init.svc.adbd=running
yea so I am running before in cyanogenmod 10.1 with jellybean and I downloaded Cyanogenmod 12.1 from rom manager. I also downloaded gapps downloader from playstore to find gapps there.
I flashed Cyanogenmod 12.1 successful. I installed Gapps successful, too
I am now running in android 5.1.1 but when the phone starts, ALL THE GOOGLE APPS I INSTALLED STOPS. Even in the startup, all the google applications forces closes and the apps is not installed. When I looked in the settings>apps>all
the google apps is there but it is in my sd, it also shows com.google......etc and it is not installed in my device.
The android Keyboard (AOSP) also closes again and again so I cannot type when the phone asks me to input password in my WIFI. SO I AM ****ING STUCK!!!!!!!!!!!!! ****ING STUCK
I wanted to try to flash it back to jellybean, but the Recovery my phone is running is the Cyanogenmod Recovery and there is no back up and restore option.
I want to fix this issue, I mean I still want to run my device on Lollipop. How can I fix this? How to make gapps work and the keyboard,
Take a backup of all your stuff in internal storage.
Download these files onto your SD card.
Kernel- https://www.androidfilehost.com/?fid=24407100847293132
TWRP- https://www.androidfilehost.com/?fid=24369303960684130
Download the proper Pico gapps from this thread.
After that,
1) Boot into recovery
2) Install the recovery
3) Reboot your device again into recovery. If it does not boot into TWRP recovery then it means you're on an older version of CM 12.1., so flash the kernel first, then the recovery, and try to reboot your device into recovery) If it booted into TWRP then you do not need to flash the kernel.
In TWRP, select 'Wipe', and do a factory reset, after that's done, select install in TWRP and flash Pico Gapps.
thanks for the reply!
but do you think this would work?
do you think the cm recovery would accept this zip files, because I tried to flash my backup applications such as games, and other stuff and it showed err signature verification failed.
Kevin3014 said:
Take a backup of all your stuff in internal storage.
Download these files onto your SD card.
Kernel- https://www.androidfilehost.com/?fid=24407100847293132
TWRP- https://www.androidfilehost.com/?fid=24369303960684130
Download the proper Pico gapps from this thread.
After that,
1) Boot into recovery
2) Install the recovery
3) Reboot your device again into recovery. If it does not boot into TWRP recovery then it means you're on an older version of CM 12.1., so flash the kernel first, then the recovery, and try to reboot your device into recovery) If it booted into TWRP then you do not need to flash the kernel.
In TWRP, select 'Wipe', and do a factory reset, after that's done, select install in TWRP and flash Pico Gapps.
Click to expand...
Click to collapse
Man, I have successfully done that.I have flashed TWRP recovery and flashed kernel.
But i cant install gapps..
I tried installing gapps for Android 4.2.1 and it worked AHAHAHAHAHA. But when I rebooted it, com.google...etc stil, all of the closes. (unfortunately com.google,etc. has stopped) even the AOSP the android keyboard isnt working.
I have some gapps working now, THE ONLY PROBLEM I HAVE NOW IS THAT THIS ****ASS AOSP KEYBOARD UNFORTUNATELY STOPPED MESSAGE EVERY 2 secs AND I CANT TYPE,
What error does it show when you try to install gapps?
And by gapps I mean the one for android 5.1.
Kevin3014 said:
What error does it show when you try to install gapps?
And by gapps I mean the one for android 5.1.
Click to expand...
Click to collapse
there is no error anymore. i installed 3rd party keyboard. thanks mate )
i mean the gapps are working but when I sync my google acc, it syncing error. they are working but after for about 5 mins or later, com.google.process.gapps unfortunately stops so i cant use it and more error stuff comes out. I think I am having issues with GApps, basically. how the hell i can fix this. I tried so many gapps from the xda thread, youtube, and other forums for 5.1.x. still, they unfortunately stop.
Take a backup of your stuff.
Download GApps (ARM/5.1/pico) from this link.
http://opengapps.org/
Copy paste the .zip file into your SD Card.
Boot into recovery (TWRP) and wipe /data, /cache, /dalvik cache
After that is done, install the open_gapps-arm-5.1-pico-xxxxxxxx.zip
Reboot your phone.
Now the unfortunately stopped error will be fixed.
that is what I have downloaded. I wiped data, cache and dalvik cache. and installed gapps
it says Insufficient storage space available in system partition. you may want to use a smaller Open GApps package or consider removing some apps using gapps-config.
NO changes were made to your device
Error Code: 70
E: Error executing updater binary in zip
Are you sure you used the pico version of gapps?
Kevin3014 said:
Are you sure you used the pico version of gapps?
Click to expand...
Click to collapse
yeahh.
what solutions can I do about this situation. I messed up :crying:
That's weird. Download Diskinfo from Playstore and post a screenshot of it. I'd like to know the space free in /system partition of your device.
Man, this is what I did
And yea, I figured it out.
1. Factory reset
2. Flash Rom
3. Flash Gapps
5. Wipe Cache / Dalvik Cache
6. Reboot
THANKS FOR SOME HELP!!!!!!!!!!!!!
Crazyevilbeef said:
Man, this is what I did
And yea, I figured it out.
1. Factory reset
2. Flash Rom
3. Flash Gapps
5. Wipe Cache / Dalvik Cache
6. Reboot
THANKS FOR SOME HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
Isn't that what I posted yesterday?
Kevin3014 said:
Isn't that what I posted yesterday?
Click to expand...
Click to collapse
I made a mistake. I forgot to put the 2nd step. it should be "Wipe system partition" and yea it worked.