S2 "Firmware upgrade ecountered an issue" - Galaxy S II Q&A, Help & Troubleshooting

Hello,
When I turn on my phone, I get an error: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I thought that I use ODIN 1.85 to flash a new ROM, but when I connect my phone to computer "USB device not recognized" shows up, and ODIN does not detect my phone.
I tried installed Kies with drivers, closed kies and nothing. Uninstalled Kies and istalled samsung drivers only - nothing. Tried 3 different computers with Win XP to Win 8 - nothing. Tried 3 different cables, including samsung original - Odin still not detecting.

and you do pass through dowload mode to flash with odin?
did you try factory reset? and then check again if it's recognized by PC ?

wishmas7er said:
and you do pass through dowload mode to flash with odin?
did you try factory reset? and then check again if it's recognized by PC ?
Click to expand...
Click to collapse
Can't get into recovery mode to do factory reset. Same error as described before.
Can get into download mode, but odin won't recognize,

you should try a JIG

Open Windows Task Manager and check for two Kies-related processes. I don't remember their full names, but they both have Kies in their names. Then download a different ROM with ODIN 3.04 and flash as usual. Also connect the phone to a USB port at the back of the PC (the ones that are straight on the motherboard) and don't use the additional ports as they also cause issues sometimes.
The same issue happened to me twice and both times that's how I solved it.

someonet1k said:
Open Windows Task Manager and check for two Kies-related processes. I don't remember their full names, but they both have Kies in their names. Then download a different ROM with ODIN 3.04 and flash as usual. Also connect the phone to a USB port at the back of the PC (the ones that are straight on the motherboard) and don't use the additional ports as they also cause issues sometimes.
The same issue happened to me twice and both times that's how I solved it.
Click to expand...
Click to collapse
Don't have any kies related processes. I have used 3 different computers (2 laptops, 1 pc) and still nothing. Have to take phone to repair shop, I think.

Related

[Q] Download Mode Issue

yes i kno wrong section but ive search all galaxy s phone q & a sections and haven't found anything (yes im aware this is the dev section)
i used odin to flash eugene froyo rom
then i tried to flash back to jfd but odin failed
then i tried to flash ji6 and odin failed
after a couple of tries i restarted my pc and my phone
i plugged my phone in while download mode and my pc no longer recognizes it neither does odin.
i have:
reinstalled drivers
different pc's
different usb cables
and still no luck..and now my phone is stuck in download mode..any ideas.
update: my pc now calls it gadget serial not unknown device but it still isnt recognized/installing
update: since my pc went from recognizing it as a unknown device to a gadget serial device after a few tries device manager lets me install the drivers..
so now i can use odin..odd case solved

HELP!

I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.

[q] help bricked my galaxy s2

I'm screwed! I was installing
MODEM_I9100XXKE4_REV_02_CL1009835.tar.md5
CODE_I9100XWKE7_CL215725_REV02_user_low.tar.md5
GT-I9100-CSC-XEUKD1.tar
and something happened in Odin3 and it froze, so I took the battery out and tried to restart it and now all I get is a blue and yellow screen that says Android System Recovery. I don't have anything backed up on the device, it didn't come with a microSD card, and it now says
Deleting Cryption Meta Data
-Copying media files....
#manual mode#
updating application....
applying multi-CSC
and that's it. When I hit reboot phone all I get is a screen with a triangle and an android symbol and when I hit apply update from sd card, same symbol, even when I tried to put a .TAR file on my dad's EVO microSD card and put it into the galaxy.
Also, now the USB cable doesn't recognize my phone for some reason so when I go back to ODIN mode it says
Product name - GT-i9100
Custom Binary Download - Yes (1 count)
Current Binary Samsung Official
When I try to restart the phone, it goes straight to the android recovery screen mentioned above, where I can't do anything, and then when I get into the Odin mode, it won't recognize the usb cable so I can link up to Odin3 V1.83 on the computer. Also tried the usb cable on other computers didn't find my phone. Also, as of right now it's not rooted, but I was in the process of rooting, when I realized I missed the Over the Air step so when I Odin3 an insecure.TAR file the WIFI was broke so S2 Root kept saying can't find usb connection even though it was connected, and somewhere along the line when I was trying to restore the radio's by installing the 3 files above, when it crashed something messed up? Now I can't do anything. PLEASE HELP
SO I AM STUCK! Please help????????
Flash the device firmware with Odin when you enter download mode.
Intratech said:
Flash the device firmware with Odin when you enter download mode.
Click to expand...
Click to collapse
Yop
http://www.jayceooi.com/2011/08/14/how-to-restore-stock-firmware-on-samsung-galaxy-s2-video/
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
cowk1ng said:
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
Click to expand...
Click to collapse
Try different versions of Odin (for example, if you're using V4, try V3 1.3 & V3 1.85 and vice versa), try different USB ports (particularly if you're using a port attached to a hub. You need to use a powered port), different USB cables & finally different PC's/different versions of Windoze if you need to.
Also, when you fire up Odin, check Task Manager in Windoze & make absolutely certain Kies or any processes associated with it (if you're not sure what these are, Google/search for them) are not running at the same time. As I've said, you need the drivers that come with Kies to use Odin, but Odin won't work if Kies or anything associated with it is running at the same time.
Try uninstalling Kies on your PC (you need the drivers that come with Kies for Odin to work), rebooting, reinstalling Kies (search for it), rebooting.
If none of that works try cleaning the USB socket of the phone a Q-tip (cotton bud) & some isopropyl alcohol. And if that doesn't work, it might be a case of the USB circuitry of the phone being shot (unless you haven't tried the above steps or are not following the right steps, which we'll never know because we're not there with you).
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
epic118 said:
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
Click to expand...
Click to collapse
Using PIT files is not recommended more brick a phone by flashing PIT than rescue it .
jje
Hi
It seems u tried to flash a sammobile firmware so look to their forum. Why dont u try a phone service?
Sent from my GT-I9100 using XDA

[HELP] My i9100 has soft-bricked and odin doesnt pick up my device

lemme start by saying what i did that caused the problem
i installed PFittech 1.0.4 and everything was moving fine untill touchwiz began FCing alot. i dont use touchwiz anyway (as i had set Apex to default) so i thought i could remove it safely without any reprocussions. i used titanium backup to do a force uninstall but the phone rebooted into a black screen. I cannot get into recovery move at all so i tried to reflash the kernel in hopes that my recovery would be fixed.. I got into download mode just fine but neither odin or windows can connect to my phone
i really need help because nothing from the other posts related to this topic is working, i followed a few other posts and nothing is making odin pick up my device in download mode
Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windoze.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again. Also run Windoze Update.
And if all this fails, try a different PC. If it doesn't work first try on the other PC, go through the above steps on that PC as well.
MistahBungle said:
Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windoze.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again. Also run Windoze Update.
And if all this fails, try a different PC. If it doesn't work first try on the other PC, go through the above steps on that PC as well.
Click to expand...
Click to collapse
dont have another pc available so im stuck with this one, tried other USB cables, tried running odin as administrator, tried uninstalling n reinstalling kies, tried another version of odin (1.87)
nothing is working -_-
i should mention that when i attempt to boot normally, the PC is able to discover the drivers and connect to the device. even MTP connects and im able to view the contents of my phone's memory (for some reason, its all 0MB in size)
based on my readings, havent heard anyone having my specific symptoms for my phone.. im getting more and more depressed because i use my phone so much and now that its down and i cant fix it.. just feeling sad :crying:
and all this because i tried to uninstall touchwiz.. :crying:
ok this is what i will try doing
since my PC recognizes my phone only when it boots normally, i will try to flash a recovery image by dropping it on my SD card, then flashing it using droid explorer's "flash recovery image" option - REALLY hope this works
EDIT
nope - not working, even after flashing using droid explorer phone reboots into black screen, no recovery, no nothing..
i recently tried odin3 v 3.04 and odin still doesnt detect my phone in download mode.. drivers are still saying "unknown device" when i boot into download mode.. ive uninstalled and reinstalled and restarted both pc and phone so many times i just feel helpless right now.. like i should just give up and buy a new phone
Need this question answered
does odin pic up the ID:COM on a device whether it is in download mode or not? based on what i read here
http://forum.xda-developers.com/archive/index.php/t-1484607.htm
odin is capable of picking up on an ID:COM even if the device isnt in download mode - in my case, odin isnt picking it up at all nd as is, windows is still able to pick up my device if i boot it normally and load MTP and the correct drivers
24 hours now since problem occured and i have made no progress whatsoever.. feeling like giving up.. dont know what to do, and dont think anyone can help me anymore -_-
After 26 hrs of talking to myself and dedication - i finally solved my problem.. i decided to update my windows base and cleared the registry on all installations and all current associated drivers, reinstalled kies, updated new drivers and when connected my phone which was in download mode my phone connected as a "gadget serial" device.. with this - odin was able to pick up on my phone and i flashed a new kernel + recovery.. with that flashed back my rom and bam - back to status
Vylle said:
After 26 hrs of talking to myself and dedication - i finally solved my problem.. i decided to update my windows base and cleared the registry on all installations and all current associated drivers, reinstalled kies, updated new drivers and when connected my phone which was in download mode my phone connected as a "gadget serial" device.. with this - odin was able to pick up on my phone and i flashed a new kernel + recovery.. with that flashed back my rom and bam - back to status
Click to expand...
Click to collapse
Just an observation... isn't this more or less what MistahBungle said to do in his post in his last suggestion? (short of clearing the registry entries, which is a good idea as well.)
ctomgee said:
Just an observation... isn't this more or less what MistahBungle said to do in his post in his last suggestion? (short of clearing the registry entries, which is a good idea as well.)
Click to expand...
Click to collapse
honestly, i tried everything he suggested, but i suppose without the windows update + updating the USB drivers through kies (not download them by themself) - i possibly wouldnt have been successful. i read a tutorial that told me that kies could put my phone into download mode for an update - so what i did was clear registry, uninstall all current drivers and manually made kies reinstall them.. then after that, connected my phone while it was on (with the screen still blank) and selected the option to peform firmware update from kies (which put my phone into download mode) from there, when my phone got into download mode the new drivers loaded up and thats when odin was able to connect
in my situation, the constant plugging out and plugging in and hoping windows by itself could pick up the drivers never helped at all.. few people stated that i didnt need kies and that it interferes with it so what i did was only install the drivers and got rid of kies.. however in my case if not for kies i wouldnt have been able to connect to odin

[Q] Galaxy S3 not being recognized in odin in download mode!!!!

Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!! (still have SuperSU app but doesnt work or gets uninstalled)
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!! Downloaded latest Kies and had it closed from task manager and all its related apps off too but Still odin wont recognize it in download mode!! been tryin since i did the Darn UPDATE! PLZ HELP :S
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
JJEgan said:
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Try Odin 3.04
sent from here, there, somewhere!!
Click to expand...
Click to collapse
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Plz Respond someone....
Click to expand...
Click to collapse
THAnks!!!!!!!!!!! Shifting usb to back of computer worked!!! U SAVIOURS THANKS A LOTT!!!!
Galaxy S3 not being recognized in odin in download mode
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Issues with usb on s3
Actually fixed my own Question....
My phone was in download mode and was not being recognized by my computer my windows 7 computer. I pressed the usb icon, where a box popped up saying that there was an unknown device. You could find this in device manager.
I then went to device manager to update the driver instead of pointing the device directly to the driver when i clicked browse my computer for software then it shows a location and option to let me pick from a list of device drivers on my computer then a box pops up showing model above that there is a little check box uncheck that two boxes will appear with manufacturer and model
Scroll samsung electronics and model samsung mobile composite device that is what you want to update the driver to...
I pulled the battery then re-entered download mode and windows to over installing the rest now it works fine. I would attach images but it will not let me for some reason. if anyone can help with that I will do it later.
THIS COULD POSSIBLY help with devices not being found on computers in bootloader or just on rom loaded and running..
Skywatcher1 said:
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Click to expand...
Click to collapse
have you got the necessary drivers also you need to stop all kies activities.
uable to see added message inn download mode
tian105 said:
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
uable to see added message inn download mode!!!!!!!!!!
Please help
Maybe solved it
Hey guys, i know it's a bit late now, but i had exactly the same problem with my gt-i9300 (got stuck on samsung splash screen and odin didn't recognize it in download mode) and just realised that everytime, i connected my phone to my PC in download mode, a message would appear that "Gadget Device" (or something like that) was connected. Then i searched in my device manager for the name of it (i found it under USB-Devices) and uninstalled the driver of it. As i connected it again with odin started it would install the driver automatically and *swoosh* odin recognized it.
A year and some later after the last post and I seem to be having this problem as well... I believe it was due to a bad flash at very low battery level which ended up in encryption failure ya da da, factory reset, clear/format everything and flash custom rom from SD because any other connection would not work.... then managed to get windows (many flavors inc. 7, 8 and 10) to connect as MTP or in USB debugging mode but Odin mode (download) just won't do anything... i put the phone in DL mode, nothing happens, no windows connection sounds, no changes in devices manager, even when searching for new hardware. I'd be very interested to know if anyone has had anything like that. I'd really like to flash stock to go back to a custom rom, flash twrp to replace cwm but all seems to no avail if i can't get a connection while in DL mode.
tried to install adb fastboot but also nada since no connection is being made.... might be something with DL mode gone awry with the bad flash... long story but OTA update from current ROM decided on its own to push update even though battery was at 5% and no user interaction ever happened...
we'll see what happens...
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Are you using the original Samsung USB cable when the phone is in download mode?
romeeoo said:
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Click to expand...
Click to collapse
Driver issue. Find the correct drivers.
Beamed in by telepathy.

Categories

Resources