Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
flashing
arough007 said:
Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
Click to expand...
Click to collapse
follow this guide step by step if problem still occurs contact me
1.Flash rom
2.Flash gapps (if isnt included to rom)
3.Wipe data&cache
4.Wipe cache
5.Wipe dalvik cache
6.Reboot (first start may take several minutes so be patient)
(its always possible that rom just isnt booting so try some other rom if this guide doesnt help)
press thanks if i helped
god damn it!
nothing works...
flashing kernel via Odin works 1 out of 10 times...
flashing rom works not at all
the whole day I'm trying to get CM on my phone -.-
I once flashed my kernel and everything worked perfectly, but no it just an enormous ****storm
and on top of it I freakin deleted my backup and now I can't even get back my old system
hell of a day
from where do I start flashing the rom if I do it a second time?
just "overflash" the old one or start from stock?
EDIT:// HOLY KAMOLY!
It justed worked! I just restarted it for the 42624726th time and now it works like a charm =)
I hope if I update it any time soon I don't have to pray to the almighty flying spaghetti-monster again
there shouldnt be any problem updating cyanogenmod just remember latest cyanogenmod is experimental and you should not flash any kernel anyway feel free to ask if your having problems
What recovery are you using?
Details help.
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?
go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.
Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked
Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!
Okay, So.. As the title says, i have googled for DAYS, Tried every damn thing i could get my hands on..
Now.
So far, im able to get into download mode, and also into recovery mode, I've tried doing a factory reset, and then flashing a stock rom, and i've tried every concevable method of fixing this damned phone, Its driving me crazy, I flash a new rom with odin, phone reboots, (adds to count) and is STILL stuck at that ****ty flashing samsung logo..
I'd really appreciate ANY help i can get, And i AM a noob at this, So i dont FULLY understand EVERY detail of this, But i've read around enough to know a few things.
My SGS3 has been out of commision for longer than i've actually used it.. So.. Yeah, Getting quite desperate!
Please let me know if there are any particular details yyou need!
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm :good:
try this first before thinking of efs errors!
.
exprxp said:
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Click to expand...
Click to collapse
Please elaborate, How would i do this with odin?
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
Click to expand...
Click to collapse
Pretty sure that i've done this by accident, But will try again to be 100% sure, Ill get back to you.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm
try this first before thinking of efs errors!
Click to expand...
Click to collapse
Again, Please elaborate, How do i go about doing this, I've never seen an option to delete the 'Dalvik cache'
Thank so damn much for the help so far guys, i really appreciate it!
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
loriz said:
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
Click to expand...
Click to collapse
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Bäcker said:
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Click to expand...
Click to collapse
i just want to clarify... when you say 'flash STOCK rom' Do you mean i need to get a rom for a SGS3 VAU (Vodafone Asutralia) and flash that (go to odin, put it in PDA, etc)
and if THAT is the case.. Where would i get said rom, Because i've downloaded it from sammy firmware 4 times, each time it finishes the download without a hitch, when i go to extract the zip to get the needed files, it says its corrupted or some such BS..
Go to Sam mobile and download the firmware mate.
You will end up with a tar md5 file you flash using PDA section of Odin.
Good luck!
Sent from my GT-I9305 using xda app-developers app
Kies is by far the easiest and safest way to factory reset. I have had to use it about 3 times in the past 6 months because I have flashed something I shouldn't have. Plus Kies now has a lite mode that is quicker at flashing your phone back to stock firmware.
serbpower said:
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
Click to expand...
Click to collapse
Slightly puzzled by you not having an "advanced" menu option. Which CWM version do you have?
Okay guys it seems ive fixxed my s3, after 4 long months lol..
What i did:
Installed Kies, Got my phone into download mode, Let kies to a PROPER wipe of the phone, (Phone, pds, csc) and it just ****ing straight up fixed everything...now i just need to find a thread that shows me how to COMPLETELY backup my ENTIRE phone, Every damn fkn Kb.. And ill be rooting it again lol
Thanks everyone!
hello to all
well i have tested a few ROM´s but the Custom Stock Rom (Codenam: ETERNITY) is one of the best in my opinion.
I have flashed this Rom, and it worked realy fine, my first mistake was that i did not make a backup, and my second mistake was that i have tried to flash some Mod´s.
After flashing a few Mod the Rom does not working correctly, anway i though i reflash it again, but that was not so easy as i thought.
After four time flashing, it did not work, so i thought, i flash the Original Samsung Firmware (i downloaded from Sammobile) so after flashing i rooted my S2 again and the Rom Eternity download it again, and save it in my mobile, in CWM window, i have follow this instructions.
Installation Pocedures:
If you're coming from ICS Roms, Stock Roms, AOKP/AOSP Roms or Custom Roms:
Download the zip file.
Put it in either internal or external SDCard.
Reboot in recovery, wipe data/factory reset, wipe cache partition, wipe dalvik cache.
Go to Mount and storage, format preload.
*If you do not have fromat preload in recovery (Except Philz and Jeboo kernels), Please go to Other Links section on 1st post to get the GS2ROMWipe. Then, run this in recovery*
Install the ROM.
After installation finish, reboot your device.
The first boot will take several minutes.
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Then, open up SuperSU App and update it.
But it did not worked, later i have follow the instructions from the Video, the same problem.
I see only on Screen : " Samsung Brilliantly Stock Custom Stock ROM"
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Click to expand...
Click to collapse
Well i have waited over 20 minutes but nothing happend.
I have ad a pic that you can see the information about my S2, and please sorry for my poor english.
I hope you guys have a idea how can i slove this problem.
Thank you all very much in advance and i hope one of you have a great solution
greets
vijay
?
Sent from the little guy
Not able to boot into system
Hi,
i was using baidu rom from quite some time. today while rebooting mistakenly instead of selecting the reebot i selected the recovery option and now i am not able to boot into my system every timei switch on my phone the cwm recovery is opening. i have tried to reinstall the same rom and the others as well but nothing is helping. ihave even tried the backup of saved past rom but still nothing is happening.
please help me..
shreyanshbengani92 said:
Hi,
i was using baidu rom from quite some time. today while rebooting mistakenly instead of selecting the reebot i selected the recovery option and now i am not able to boot into my system every timei switch on my phone the cwm recovery is opening. i have tried to reinstall the same rom and the others as well but nothing is helping. ihave even tried the backup of saved past rom but still nothing is happening.
please help me..
Click to expand...
Click to collapse
DO THIS
1. before re flashing the baidu rom do clear cache/ factory reset and wipe partition.
If it still doesn't works then
2. download an official firmware and flash it via odin, then re-root your device and flash baidu rom. It work work 100%
Let me know for any further assistance
akky26 said:
DO THIS
1. before re flashing the baidu rom do clear cache/ factory reset and wipe partition.
If it still doesn't works then
2. download an official firmware and flash it via odin, then re-root your device and flash baidu rom. It work work 100%
Let me know for any further assistance
Click to expand...
Click to collapse
Thanks a lot for your help
Flashing rom didn't helped but i just flashed cwm again and my problem was solved.