hello to all
well i have tested a few ROM´s but the Custom Stock Rom (Codenam: ETERNITY) is one of the best in my opinion.
I have flashed this Rom, and it worked realy fine, my first mistake was that i did not make a backup, and my second mistake was that i have tried to flash some Mod´s.
After flashing a few Mod the Rom does not working correctly, anway i though i reflash it again, but that was not so easy as i thought.
After four time flashing, it did not work, so i thought, i flash the Original Samsung Firmware (i downloaded from Sammobile) so after flashing i rooted my S2 again and the Rom Eternity download it again, and save it in my mobile, in CWM window, i have follow this instructions.
Installation Pocedures:
If you're coming from ICS Roms, Stock Roms, AOKP/AOSP Roms or Custom Roms:
Download the zip file.
Put it in either internal or external SDCard.
Reboot in recovery, wipe data/factory reset, wipe cache partition, wipe dalvik cache.
Go to Mount and storage, format preload.
*If you do not have fromat preload in recovery (Except Philz and Jeboo kernels), Please go to Other Links section on 1st post to get the GS2ROMWipe. Then, run this in recovery*
Install the ROM.
After installation finish, reboot your device.
The first boot will take several minutes.
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Then, open up SuperSU App and update it.
But it did not worked, later i have follow the instructions from the Video, the same problem.
I see only on Screen : " Samsung Brilliantly Stock Custom Stock ROM"
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Click to expand...
Click to collapse
Well i have waited over 20 minutes but nothing happend.
I have ad a pic that you can see the information about my S2, and please sorry for my poor english.
I hope you guys have a idea how can i slove this problem.
Thank you all very much in advance and i hope one of you have a great solution
greets
vijay
?
Sent from the little guy
Related
So...I can't install either of the two CM based ROM's I've downloaded. However, on the first try, I installed VEGan, and then tonight TNT Lite, with no issues. Any CM ROM I try to install just sits on the loading screen, regardless of how long I wait. Is there something special that needs to be done to install them, different than what I do for other ROM's? (Clear data/cache, flash the ROM, clear data/cache again, reboot.)
sfreemanoh said:
So...I can't install either of the two CM based ROM's I've downloaded. However, on the first try, I installed VEGan, and then tonight TNT Lite, with no issues. Any CM ROM I try to install just sits on the loading screen, regardless of how long I wait. Is there something special that needs to be done to install them, different than what I do for other ROM's? (Clear data/cache, flash the ROM, clear data/cache again, reboot.)
Click to expand...
Click to collapse
I believe you have ClockworkMod 0.8 recovery, since you were able to flash Vegan Rom.
In general, before you flash the different rom
1. Back up your current rom
2. wipe data (factory reset)
3. wipe cache
4. flash the rom
5, flash gapps
6. reboot
Hope this helps
There have also been some reports of G-Tablets coming out of the box with incorrect partitions.
Using NVFlash has cured those issues. You should then be able to flash CM7 Roms through CWM like everyone else.
I repartitioned with 2048/0, shouldn't that rule out any partitioning problems?
I'm trying it again right now with flashing the rom then gapps.zip, waiting for it to boot...or just stay on the boot screen.
Format system and data, then follow those steps again. I ran in to similar issues when I hadn't formatted.
Also, do the three wipes again after installing the ROM and gapps.
Holy crap! I see the CM boot screen now! Thanks for the help guys. Now, do I still need to do the market fix (http://forum.xda-developers.com/showthread.php?t=865245)? It looks like from their changelogs that the latest version of Flash is cooked into the ROM so I shouldn't have to do that part from the guide, but I'm wondering about the market.
Well, the market seems to have everything, including an app (power control plus) that none of the other rom's let me see, so I seem to be good to go! Thanks again guys!
Thanks for the suggestion - and I'll readily admit I'm WAY out of my comfort zone with Android.
When I format the /system /data do I have to mount first?
What order do the steps run in? Do I partition and then format /system /data?
cannot install cm based roms
I was trying to reset from factory rest but failed when my gtablet stucked and apparently did something wrong along the way. Now when I turn it on, I get the 3 birds screen, followed by G-Tabdevs screen, then dead. I do have clockwork mod installed on it.
1 when I clicked factory rest, it just return to the manue and said cannot find the file.
2 when I did a back up, it went through boot image,recovery image,system and then taskbar stopped in the half at settings.apk and then dead.
3 when I tried to followed this link http://forum.xda-developers.com/showthread.php?t=865245
to use the external tf card to flash, Gtablet doesnot recogonize the external card, while I can read all the files in gtablet. I can copya single small file but cannot paste a recovery and update.zip on gtablet. Each time I copied a file from gtablet, then it is dead. I have to return on by pressing power and volume+.
4 I tried adb to push update.zip to gatblet,also failed. I feel my gtablet can only allows me to read it and refuse me to do anything on it.
Any ways to reboot my gatblet brick?
Please help! I've been reading forums all weeks trying to figure out how to fix it and am not having any luck!
Appreciate any suggestions
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
flashing
arough007 said:
Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
Click to expand...
Click to collapse
follow this guide step by step if problem still occurs contact me
1.Flash rom
2.Flash gapps (if isnt included to rom)
3.Wipe data&cache
4.Wipe cache
5.Wipe dalvik cache
6.Reboot (first start may take several minutes so be patient)
(its always possible that rom just isnt booting so try some other rom if this guide doesnt help)
press thanks if i helped
god damn it!
nothing works...
flashing kernel via Odin works 1 out of 10 times...
flashing rom works not at all
the whole day I'm trying to get CM on my phone -.-
I once flashed my kernel and everything worked perfectly, but no it just an enormous ****storm
and on top of it I freakin deleted my backup and now I can't even get back my old system
hell of a day
from where do I start flashing the rom if I do it a second time?
just "overflash" the old one or start from stock?
EDIT:// HOLY KAMOLY!
It justed worked! I just restarted it for the 42624726th time and now it works like a charm =)
I hope if I update it any time soon I don't have to pray to the almighty flying spaghetti-monster again
there shouldnt be any problem updating cyanogenmod just remember latest cyanogenmod is experimental and you should not flash any kernel anyway feel free to ask if your having problems
What recovery are you using?
Details help.
Hello, I am new to the rom installing process. So, what I do is I take the .zip file, drag it onto my phone then I install the .zip on my phone. It says that it works, but when i try and boot it up every single rom gets stuck at boot screen. I'm on a ATT galaxy note 2. Please help me
Installing Roms on Galaxy Note II
Try rebooting the phone, that usually works for me when my phones get stuck booting up.
nigerson said:
Hello, I am new to the rom installing process. So, what I do is I take the .zip file, drag it onto my phone then I install the .zip on my phone. It says that it works, but when i try and boot it up every single rom gets stuck at boot screen. I'm on a ATT galaxy note 2. Please help me
Click to expand...
Click to collapse
There are a few possibilities of what could have happened. The most possible one that I can think of is that you did not Wipe Data/factory rest before flashing your rom. When updating to a new rom, it is most of the time necessary to choose wipe data/factory reset from the recovery before flashing. So what you do now is: 1.Boot into recovery. 2. choose the wipe data/factory reset option(U will loose all ur apps that u have downloaded, your photos music and videos should remain intact tho) 3. Flash your ROM again.
Hope that helps
thank you
geoworld_200 said:
there are a few possibilities of what could have happened. The most possible one that i can think of is that you did not wipe data/factory rest before flashing your rom. When updating to a new rom, it is most of the time necessary to choose wipe data/factory reset from the recovery before flashing. So what you do now is: 1.boot into recovery. 2. Choose the wipe data/factory reset option(u will loose all ur apps that u have downloaded, your photos music and videos should remain intact tho) 3. Flash your rom again.
Hope that helps
Click to expand...
Click to collapse
thank you works perfectly!!!
I have Samsung galaxy Y handset. I just rooted it for trying new ROM. I installed the zip file of klerks and also the custom ROMs cyanocream v3 and paranoid. I switched the phone to recovery mode and clicked 'apply the custom rom' option. And since it wasn't showing the wiping and the other formatting option, I clicked 'reboot' option. And from then the phone isn't running, I see only the Samsung logo it shows on switching. I tried everything, the recovery mode is also not running, took the battery out but still same problem. Can you please crack this problem? I need my phone!
I dont own this device so Im not sure what's the process (although im familiar with the whole galaxy family), but I do wonder, did you install custom recovery (like CWM)? Did you make a backup before applying the ROM?
Can you still access the recovery mode? Whenever i mess up an installation, i usually search for an stock rom and flash it via the external SD card.
Perhaps this might come helpful
http://forum.xda-developers.com/showthread.php?t=2324937
Still Cant!!!
DBThanatos said:
I dont own this device so Im not sure what's the process (although im familiar with the whole galaxy family), but I do wonder, did you install custom recovery (like CWM)? Did you make a backup before applying the ROM?
Can you still access the recovery mode? Whenever i mess up an installation, i usually search for an stock rom and flash it via the external SD card.
Perhaps this might come helpful
http://forum.xda-developers.com/showthread.php?t=2324937
Click to expand...
Click to collapse
i am still not able to run the custom rom.
I rooted my phone.
Opened up the CWM v5, and wiped-data,cache partition, format data, format cache, mounted all drives,---
went into advance to wipe dalvik cache and the other data.
Installed the custom rom by opening the zip file through install zip from sd.
I installed the custom rom (tried all, jellybean, cyanocream v3, paranoid, icecream).....
BUT EACH TIME EITHER IT STOPED WITH Samsung Galaxy Y logo screen OR at logo of cyanocream (when installing cyanocream).
SO I HAD TO FLASH MY PHONE EACH TIME WITH STOCK ROAM THROUGH ODIN. Then it works on its standard android.
I tried many times. Checked all steps. Checked all videoes.
I CANT MAKE OUT WHERE AM I MAKING MISTAKE EXACTLY ?????? Can any one please tell me the most accurate and effective correct method to do this successfully?
himanshutihalht said:
i am still not able to run the custom rom.
I rooted my phone.
Opened up the CWM v5, and wiped-data,cache partition, format data, format cache, mounted all drives,---
went into advance to wipe dalvik cache and the other data.
Installed the custom rom by opening the zip file through install zip from sd.
I installed the custom rom (tried all, jellybean, cyanocream v3, paranoid, icecream).....
BUT EACH TIME EITHER IT STOPED WITH Samsung Galaxy Y logo screen OR at logo of cyanocream (when installing cyanocream).
SO I HAD TO FLASH MY PHONE EACH TIME WITH STOCK ROAM THROUGH ODIN. Then it works on its standard android.
I tried many times. Checked all steps. Checked all videoes.
I CANT MAKE OUT WHERE AM I MAKING MISTAKE EXACTLY ?????? Can any one please tell me the most accurate and effective correct method to do this successfully?
Click to expand...
Click to collapse
I don't own this phone too but my mother has . Did you flash the kernel for custom rom such as 'white xp kernel' for cynocream before flashing the rom? You can download it from the same post you download the rom and you can backup your stock rom in cwm so if anything happen you can boot to cwm and restore it back.
himanshutihalht said:
I have Samsung galaxy Y handset. I just rooted it for trying new ROM. I installed the zip file of klerks and also the custom ROMs cyanocream v3 and paranoid. I switched the phone to recovery mode and clicked 'apply the custom rom' option. And since it wasn't showing the wiping and the other formatting option, I clicked 'reboot' option. And from then the phone isn't running, I see only the Samsung logo it shows on switching. I tried everything, the recovery mode is also not running, took the battery out but still same problem. Can you please crack this problem? I need my phone!
Click to expand...
Click to collapse
search for flashing firmware via odin for your device...
search it and you will get the answer
himanshutihalht said:
i am still not able to run the custom rom.
I rooted my phone.
Opened up the CWM v5, and wiped-data,cache partition, format data, format cache, mounted all drives,---
went into advance to wipe dalvik cache and the other data.
Installed the custom rom by opening the zip file through install zip from sd.
I installed the custom rom (tried all, jellybean, cyanocream v3, paranoid, icecream).....
BUT EACH TIME EITHER IT STOPED WITH Samsung Galaxy Y logo screen OR at logo of cyanocream (when installing cyanocream).
SO I HAD TO FLASH MY PHONE EACH TIME WITH STOCK ROAM THROUGH ODIN. Then it works on its standard android.
I tried many times. Checked all steps. Checked all videoes.
I CANT MAKE OUT WHERE AM I MAKING MISTAKE EXACTLY ?????? Can any one please tell me the most accurate and effective correct method to do this successfully?
Click to expand...
Click to collapse
Try this if you are using CM based roms.
Go to CWM. Wipe data, wipe cache, go to mounts and storage mount all (except SD card) install kernel zip(not ROM zip, use kernel zip) go to advanced NEVER WIPE DALVIK CACHE AND BATTERY STATS WHEN INSTALLING ROM, reboot recocery, you will get mounting error. Ignore it. format all (except SD card). Install rom zip reboot. I have used this many times and no fail yet.
I own this device and if you have any problem feel free to ask.
If you want instructions for any ROM, reply here with Rom's link.
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands