Related
These are tweaks to improve the smoothness and performance of the phone
Original Post: http://forum.xda-developers.com/showthread.php?t=1236779
So will this work for a CM7 fascinatemtd ROM...
Sent from my SCH-I500 using XDA Premium App
adude247 said:
So will this work for a CM7 fascinatemtd ROM...
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
yes it will work
Just installed it. All seems well so far
my guess is stock gingerbread wont be supported? im running stock rooted ginger (PWGB).
darkmage1991 said:
my guess is stock gingerbread wont be supported? im running stock rooted ginger (PWGB).
Click to expand...
Click to collapse
no you should be fine, and it will support it
I'm not sure if the 11.1 glitch kernel will work or not, but I'll test it anyway.
EDIT: Maybe it's just placebo, but I seem to be having occasional lag now that I've flashed this tweak.
EDIT2: Actually, forget my above comment, things seem to be working fine. I don't see much of an improvement, but then again, my phone was already running super smooth.
Runs.
Better or worse who knows, I cant tell.
To me its about the same speed but the data seems more stable.
Sent from my SCH-I500 using XDA App
So just to be sure this will work on ccampos784 gingerbread build??
Sent from my ADR6400L using XDA App
dc iz 2 legit said:
So just to be sure this will work on ccampos784 gingerbread build??
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
It should yea
Sent from my SGH-T959V using XDA Premium App
miui?
Sent from my SCH-I500 using the XDA mobile application powered by Tapatalk
hbc.ciccone said:
miui?
Click to expand...
Click to collapse
^Yes
I seem to be getting more free memory after I use advanced task killer
dsexton702 said:
It should yea
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
So it will work with PWGB even though the kernel is RFS and not EXT4?
Clean out
How do I clean out the old init files?
dsexton702 said:
These are some new tweaks for samsung phones created by dsexton702 member founder of Team Acid
i edited some init.d files
gave back A LOT of FPS that GB took away(went from 28-56)
added app_process and system_server from honeycomb 3.1 (working on 3.2)
and enabled data=writeback
cfq io scheduler tweaked not deadline
added nobh to ext4 mounts
hexedited sqlite and sqlite_jni(Thanks cyagen team for that)IMPROVES I/O
WHAT THIS DOES
greatly improves I/O performance
gives you the newest fugu tweak, honeycomb 3.1 edition
Tweaked init.d files that have been proven to improve Samsung phones performance
slightly improves battery life
makes the phone extra smooth
RECOMENDED
make sure your kernel supports init.d
preferred files system EXT4
clean out the init.d file so files dont conflict each other
make a nandroid back up before flashing JUST incase
enjoy
Tweaksv6
http://www.mediafire.com/?y41tq2djiks7729
if you cant download, try a different browser or let me know. there are two links just in case
Thanks:
EDT for original init.d files that i tweaked
Team Whiskey for any files i might have tweaked of theirs
Click to expand...
Click to collapse
How do I clean out the old init files?
mediafire keeps saying download unsuccessful... could somebody attach the zip file so I can download with Tapatalk? web download sites are always screwy for me.
/edit I used vnc to download it on my laptop and put it in my dropbox, works great for me. but it would be nice to have it uploaded to xda.
Sent from my MIUI SCH-i500
Is this the same as the acid tweaks zip from other thread?
http://www.mediafire.com/file/y41tq2djiks7729/Acid Tweaksv6.zip
Wow work great on my sgs!! thx billion.. Now my benchmark 3121!!
Sent from my GT-I9000 using xda premium
are-red said:
Wow work great on my sgs!! thx billion.. Now my benchmark 3121!!
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
what overclock? I only ask, because I've been getting 3000+ for sometime without this tweak (highest @ 1.5ghz - 3334)...
def
Preparing to test on MIUI 8/26, glitch v12 test version, 1200 oc, no uv, deadline/ondemand... Quadrant scores provided strictly for reference purposes...
Before: 2184
After: 2497
Another Fascinating post by my XDA app...
Hey guys im running faux's enhanced stock kernel on DarkSide v2.1 and I was wondering how I can undervolt it?
Sent from my MB860 using XDA App
Just download setcpu and then go to voltages and set them to how you want
To give you an idea of what settings people usually use, some people posted their working settings in this forum
http://forum.xda-developers.com/showthread.php?t=1183059
n/m 10char
I installed v6 supercharger and haven't noticed much of a difference. However I'm not sure I installed it correctly. Any advice on how to make Ics passion on my vibrant faster. Btw oc'ing seems to fail for me on Ics
It should help with memory management but you have to change services.jar for supercharger to fully work. Full tutorial on supercharger thread.
CPU are different some phones don't like oc. Changing arm and interbal voltages may help.
Sent from my GT-I9000 using XDA App
trailblazerz11 said:
It should help with memory management but you have to change services.jar for supercharger to fully work. Full tutorial on supercharger thread.
CPU are different some phones don't like oc. Changing arm and interbal voltages may help.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
your right it did help ... it wasn't until I went from ics passion 13rc1 to ics euphoria rc1 that I noticed how much it did help
You guys got supercharger v6 working for euphoria?
I supercharged 2.2 roms before with no problems, but all these extra steps for ICS is way over my head. I really want to get it working, but I know I'll mess something up.
Just supercharge as normal and you end up with 50%. You don't have to do the jars mod but you won't have hard to kill launcher but can bulletproof
Sent from my SGH-T959 using XDA
trailblazerz11 said:
Just supercharge as normal and you end up with 50%. You don't have to do the jars mod but you won't have hard to kill launcher but can bulletproof
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
whats the difference between hard to kill and bulletproof?
would it be worthwhile to actually do every step or is 50% good enough?
Hello XDA
I have just flashed my rom to CM 7.1.0.1
I have noticed that the DooMKernel will allow you to over clock to 1.9 GHz. Is it possible to flash this Kernel CM 7.1 or is there another kernel I can use to achieve a 1.9ghz over clock
Sent from my SK17i using XDA
1.9 GHz is quite dangerous for these processors. Better don't overclock so high or phone will break down.
Sent from my Xperia Live using xda premium
Hello,
Just because I can OC to 1.9 doesn't mean I'm going to keep it at 1.9 all the time.
I would like to know if the above is possible and if someone could could direct me to the correct place to download the kernel.
Sent from my SK17i using XDA
[email protected] said:
Hello,
Just because I can OC to 1.9 doesn't mean I'm going to keep it at 1.9 all the time.
I would like to know if the above is possible and if someone could could direct me to the correct place to download the kernel.
Sent from my SK17i using XDA
Click to expand...
Click to collapse
Here is kernel that can do exactly that in CM7.2.0
I don't know if this rom is applicable to CM7.1.0, so do it at your own risk
http://forum.xda-developers.com/showthread.php?t=1549221
Of course, i assume that your phone is either Mini, Mini Pro, or Active
Hello all,
As the subject reads I am running Steel Droid v11 and V6 Supercharger. My question is will using compcache settings with supercharger help me or hurt me? If it helps, what would be the optimal setting?
Side note, props to the Steel Droid dev, as well as zeplinrox for bringing us the V6 Supercharger script!!
Sent from my Droid using xda app-developers app
dudewithspots said:
Hello all,
As the subject reads I am running Steel Droid v11 and V6 Supercharger. My question is will using compcache settings with supercharger help me or hurt me? If it helps, what would be the optimal setting?
Side note, props to the Steel Droid dev, as well as zeplinrox for bringing us the V6 Supercharger script!!
Sent from my Droid using xda app-developers app
Click to expand...
Click to collapse
You shouldn't use Compcache with the V6 supercharger because it interferes with the way V6 allocates memory as well as low level memory groupings. If you want some tips for improving the performance on your Droid let me know .
Sent from my SCH-I535 using xda premium
shimp208 said:
You shouldn't use Compcache with the V6 supercharger because it interferes with the way V6 allocates memory as well as low level memory groupings. If you want some tips for improving the performance on your Droid let me know .
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
You are the man! Thank you so much!! I've got the Droid 1 and have been scouraging through this forum, looking for what I thought was the best. Being new the forums in general its tough to know what is already outdated, even if its only been a few months since the post.
Tell me what you think of this, I am running Steel Droid v11 with the V6, using the kernal that came with v11. As of today I'm 100% supercharged with my launcher at Bulletproof! It actually seems to be running pretty smooth, a few FC's once in a while but running the emissions script fixes those until reboot. Is that the latest and greatest as of now? I know that not a whole lot is happening on the Droid 1 so I want to have the best I can.
Thanks!
dudewithspots said:
You are the man! Thank you so much!! I've got the Droid 1 and have been scouraging through this forum, looking for what I thought was the best. Being new the forums in general its tough to know what is already outdated, even if its only been a few months since the post.
Tell me what you think of this, I am running Steel Droid v11 with the V6, using the kernal that came with v11. As of today I'm 100% supercharged with my launcher at Bulletproof! It actually seems to be running pretty smooth, a few FC's once in a while but running the emissions script fixes those until reboot. Is that the latest and greatest as of now? I know that not a whole lot is happening on the Droid 1 so I want to have the best I can.
Thanks!
Click to expand...
Click to collapse
That's similar what I used to run when my Droid was my main phone except I used Cyanogenmod 7.2 (http://get.cm/get/jenkins/2861/cm-7.2.0-sholes.zip), Primes Deprimed Kernel (http://bit.ly/deprimed_test), and these build.prop tweaks (http://forum.xda-developers.com/showthread.php?t=1808791).
Sent from my SCH-I535 using xda premium
Thanks for your help and links. Greatly appreciated.
Sent from my Droid using xda app-developers app
dudewithspots said:
Thanks for your help and links. Greatly appreciated.
Sent from my Droid using xda app-developers app
Click to expand...
Click to collapse
No problem man always glad to help let me now if you need anymore tips or have questions let me know .
Sent from my SCH-I535 using xda premium
shimp208 said:
No problem man always glad to help let me now if you need anymore tips or have questions let me know .
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I don't know if you're still around, but I have CM7.2 and the deprimed kernel. Basically I'm replicating what you had on your OG Droid. I'm having problems finding some of the build.prop tweaks. I'm using root explorer, build.prop editor, and I've installed busybox. I can't find some of the tweaks. Do I need to add them, or do anything else to find/add them?
servo086 said:
I don't know if you're still around, but I have CM7.2 and the deprimed kernel. Basically I'm replicating what you had on your OG Droid. I'm having problems finding some of the build.prop tweaks. I'm using root explorer, build.prop editor, and I've installed busybox. I can't find some of the tweaks. Do I need to add them, or do anything else to find/add them?
Click to expand...
Click to collapse
Hey I'm still around I will be playing with my Droid 1 forever, good droids never die ! Getting to your question which build.prop tweaks are you having trouble finding and can't seem to locate? For the build.prop tweaks you either edit an already existing value for example if you wanted to change the Dalvik Virtual Machine heap size from 32 MB to 48 you would change the "dalvik.vm.heapsize=32m" property to "dalvik.vm.heapsize=48m", and so on with the other build.prop variables you want to change. If there are build.prop variables you want to add that aren't included add them to the end of the build.prop after leaving a blank line then the build.prop variables you want to add. Let me know if you have any more questions .