Ok, Here we go....I am very new at this and never did a kernel flash so excuse my ignorance...have flashed roms...soraum...and now using blackstar vII rom and love it...but i heard alot about this hydracore kernel and wanted to know if i could flash it on the blackstar verison 7 rom...i already have this rom installed....
So question...i want to know how to flash this hyracore kernel 5.4 on my galaxy note sgh-i717 at&t...
FYI..I download hydracore kernel 5.4 OC zip the other day and tried to install through cmw and it literally bricked my galaxy note...I mean their was nothing...no power....nothing....wouldnt turn on anything.....luckly i was under warrenty and got a replacement so i am up and running...on a new galaxy note 2 sgh-i717 att with blackrain version 7 rom and everything is good....
SO how to install kernel and what did i do wrong that literally shut down my note or bricked it......
you are flashing the wrong kernel not made for I717
Sent from my SAMSUNG-SGH-I717 using xda premium
From what I can tell that kernel is for the n7000 not the i717, which explains why you bricked your device. Kernels are device specific. We do not currently have anything like that for the i717 yet.
Sent from my SAMSUNG-SGH-I717 using xda premium
Hydracore is for the n7000 note. That's the international version. You're running the i717 version. None of the ROMs or kernels from the n7000 will work on the i717 and vice versa.
My phone is a Samsung galaxy note sgh_i717. It's on the rogers network. I successfully installed cwm and tried to install cm10 (for at&t version, but which I read in a forum it's the same phone and roms should work) and I got an error when installing the zip. I ended up giving up on cm10 and tried installing liquid smooth rom and it ended up hard bricking my phone. Luckily rogers fixed it under warranty. I'm hoping someone could offer some insight into how to get cm 10 on my phone.
Sent from my SGH-I717R using xda app-developers app
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Yes you can, you're gonna have to root it tho.
Sent from my GT-I9100 using xda app-developers app
Thanks. Can I root present 2.3.6 Gingerbird and Install Custom Rom Omega v23 4.1.2 directly? Or I have to reinstall stock version 4.1.2 over current 2.3.6 Gingerbird?
Sent from my GT-I9100 using xda app-developers app
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am not getting it. Please spoon feed me. I will be in debt.
I tried following steps:
I download Omega V23 custom rom and kernel - PhilZ-cwm6-XWLSN-OXX-4.93.6-signed and placed it on SDCard. After going into stock recovery I applied Philz Kernel via Stock Recovery. But getting error in red-
E:Failed to verify whole file signature
E:Signature verification failed
Please give me any solution. I dont have enough previlage to post into Android Development Forum as I am newbee here.
Sent from my GT-I9100 using xda app-developers app
dg081081 said:
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
slimlo said:
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
Click to expand...
Click to collapse
Yepp..You are not getting it. System is running GingerBread with Stock Recovery. I can make backup in CWM recovery only. But right now my problem is that Philz Kernel is not installing. It will give me CWM Recovery and it will root the device. Any solution for above error??
Sent from my GT-I9100 using xda app-developers app
philz does not work on gingerbread ------------->>>> Philz
slimlo said:
philz does not work on gingerbread ------------->>>> Philz
Click to expand...
Click to collapse
Then I have to flash stock 4.1.2 firmware via Odin Am I right?
Sent from my GT-I9100 using xda app-developers app
Hey everyone,
I want to flash the new slimrom onto my I9505. It goes from android 4.2.2(stock rom) to android 4.3 (slimbean).Do i have to change my kernel when doing so?
Thx in andvance
Sent from my GT-I9505 using XDA Premium 4 mobile app
Not sure about the specifics to the i9505 but on most every device that has a custom ROM produced for it (especially a big name ROM like cyanogen or slim) you would just make a backup in recovery, wipe clean, flash new ROM, then flash gapps if needed
The kernel most always is included with the ROM and will be flashed at the same time, but there are differences in every device so I advice to read the procedure in phone forum for specifics to your devices
Sent from my Nexus 4 using Tapatalk 2
I was using http://forum.xda-developers.com/showthread.php?t=1290468 rom.
Now while trying to install
http://forum.xda-developers.com/showthread.php?t=2580489
http://forum.xda-developers.com/showthread.php?t=1436854
Both give status 7 error while in cwm recovery
older roms such as rootbox v3.7.1 and jellybam v6.0.0 are installing fine.
Are the above stated roms not suitable for sgs2 i9100i
Probably you should first read the instructions before starting to flash ...
You need CWM recovery > 6.0.4.x otherwise it will not flash.
Sent from my Nexus 7 using xda app-developers app