hi, i bought evo 3d in pakistan it was working fine after OTA update i just tried to root it and then tried a custom RUU but it failed and eventually it sucked my original RUU the phone just started restarting from boot screen after that i just visited local market and just gave to some local vendor for software repair he just installed some RUU which in turn sucked the camera and wifi now when i tap at camera app it shw nothing but a certain increase in brightness and then back to normal similarly when i check my wifi it shows 'error' and shows no effect on tapping it i confirmed HTC about the rom they have told me that the local vendor has installed the rom of any other country so how can i get the original rom i.e shipped for Singapore or in other case can my camera and wifi be repaired ??? your kind help will be highly appreciated pl...
well a good way you can start is telling us about your device.
Go into your bootloader and list what it says.
Astrikz said:
well a good way you can start is telling us about your device.
Go into your bootloader and list what it says.
Click to expand...
Click to collapse
well it shows
*** Locked ***
SHOOTER_U PVT SHOP S-OFF RL
HBOOT-1.49.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.0202
eMMC-boot
Jul 12 2011, 15:29:51
HBOOT
Do you have a recovery installed? With your hboot and s-off you should be able to flash any rom.
get this recovery: http://forum.xda-developers.com/showthread.php?t=1560279
then flash any rom you want.
EM|NEM said:
Do you have a recovery installed? With your hboot and s-off you should be able to flash any rom.
get this recovery: http://forum.xda-developers.com/showthread.php?t=1560279
then flash any rom you want.
Click to expand...
Click to collapse
i do have recovery installed so firstly it is locked means i would unlock it through htcdev.com method and most importantly i dont wanna install custom rom i wanna install official rom so if u do have a link or in other case my gingerbread rom is working efficiently just camera and wifi are giving errors if u have their drivers it would be a great help.
umalik15 said:
i do have recovery installed so firstly it is locked means i would unlock it through htcdev.com method and most importantly i dont wanna install custom rom i wanna install official rom so if u do have a link or in other case my gingerbread rom is working efficiently just camera and wifi are giving errors if u have their drivers it would be a great help.
Click to expand...
Click to collapse
try flash different ROMs and enjoy them..
I never known which ruu is perfect for you so wait any other user helps you and never try to unlock boot loader with HTC dev you already have switch-off.
Sent from my Evo 3D GSM using xda premium
umalik15 said:
i do have recovery installed so firstly it is locked means i would unlock it through htcdev.com method and most importantly i dont wanna install custom rom i wanna install official rom so if u do have a link or in other case my gingerbread rom is working efficiently just camera and wifi are giving errors if u have their drivers it would be a great help.
Click to expand...
Click to collapse
you're s-off. dont think you need to unlock bootloader. if you're looking for something close to stock I'd recommend you look into this rom. I know its not stock but its much better. you wont lose 3d capabilities as its sense 3.6.
If you insist on stock then you might wanna run an RUU and get back to stock. Get the "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe" ruu. Most of the phones in pak come from Europe
Made in china, lol
You and I have the same phone - same software running when originally bought: i bought mine directly from china and the phone was only meant for people living in asia, if you did unlock through htcdev, did you have any problem unlocking, mine doesnt want to go past the disclaimer screen, I select yes , press power button and nothing happens even after a 30 min??? any1 please help btw, slecting no, it responds within 2 seconds
reseeus wepen
EM|NEM said:
you're s-off. dont think you need to unlock bootloader. if you're looking for something close to stock I'd recommend you look into this rom. I know its not stock but its much better. you wont lose 3d capabilities as its sense 3.6.
If you insist on stock then you might wanna run an RUU and get back to stock. Get the "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe" ruu. Most of the phones in pak come from Europe
Click to expand...
Click to collapse
See i had given the phone to developer when he returned me, the recovery is not opening any way so i ll try to install recovery my way and more importantly how can I install custom rom through my computer i only know the way of installing the rom through recovery i.e. by copying into memory card...
see this link:-
http://androidforums.com/gsm-evo-3d...-how-unlock-install-recovery-root-htcdev.html
Install only recovery never unlock boot loader....
Sent from my Evo 3D GSM using xda premium
If the above link seems a bit difficult to understand I've detailed what you need to do
Its really easy to do it on your own. Just need a few things to set up on your pc/laptop
Install these drivers first: http://dl.dropbox.com/u/97347619/HTCDriver3.0.0.007.exe
Then dl this and extract it in a folder in C:\ drive : http://dl.dropbox.com/u/97347619/mini-adb.zip
Name that folder "android". Now download this recovery(4EXT recovery):http://dl.dropbox.com/u/97347619/recovery.img
Place this recovery.img in android folder
Now open cmd and type "cd C:\android"
Now boot into bootloader and connect your phone to pc and select fastboot on your phone. It should say FASTBOOT USB in red on your phone. This is very important because it shows whether your phone is properly connected or not.
type "fastboot devices" and see if your phone is listed
IF your phone is detected then type this command: "fastboot flash recovery recovery.img"
then to boot into recovery type "fastboot boot recovery.img"
recorvy is not being installed whenever i try it shows remote failed... snapshot attached
oh crap. frogot this completely.This isnt a problem with custom hboots like revolutionary hboot(which is what i use). What you need to do is unlock bootloader from htcdev before you can flash recovery. after that it doesnt matter whether you are unlocked or locked if you want to flash rom.
just follow the instructions at htcdev and you'll get your unlock token
EM|NEM said:
oh crap. frogot this completely.This isnt a problem with custom hboots like revolutionary hboot(which is what i use). What you need to do is unlock bootloader from htcdev before you can flash recovery. after that it doesnt matter whether you are unlocked or locked if you want to flash rom.
just follow the instructions at htcdev and you'll get your unlock token
Click to expand...
Click to collapse
OR just flash a custom bootloader. Much easier
mnomaanw said:
OR just flash a custom bootloader. Much easier
Click to expand...
Click to collapse
i am afraid that unlocking through htc dev may make my phone to 'S-ON' as i last time tried it unlocked the loader and made it to s-on and tried some custom roms but all roms were giving the same error that the bootimage can not be created so then a local developer somehow managed to write the rom through J-TACK but the camera & wifi are still not working so i dont wanna go this way again... so any better idea???
umalik15 said:
i am afraid that unlocking through htc dev may make my phone to 'S-ON' as i last time tried it unlocked the loader and made it to s-on and tried some custom roms but all roms were giving the same error that the bootimage can not be created so then a local developer somehow managed to write the rom through J-TACK but the camera & wifi are still not working so i dont wanna go this way again... so any better idea???
Click to expand...
Click to collapse
Friend, I again suggest never try HTC dev .. For custom boot loader you can go there:-
http://unlimited.io/jbhboots.htm
1. Download both hboot of your phone like hboot 1.49.9999 for gb and 1.53.5353 for ics..
2. I think your are on ICS (check you are on android 4.0.3) then choose 1.53.5353 and rename it to " PG86IMG.zip" ..
3. Copy this file into root folder of SD card..
4. Switch off the phone.
5. Go to boot loader with pressing power and vol. - button at same time .
6. Once you go to the boot loader , boot loader scan "" PG86IMG.zip"" and after scaning bootloader ask for update ..
7.. After update.. You can check you bootloader version is 1.53.5353 with no "locked" and "unlocked" statement instead he say jopunetbear..
8. Try again flash recovery with adb and fast boot(you known the procedure already)..
I try this method to get root again after flashing ruu(as PG86IMG.zip),
Hope this will working for you also....
Sent from my Evo 3D GSM using xda premium
umalik15 said:
i am afraid that unlocking through htc dev may make my phone to 'S-ON' as i last time tried it unlocked the loader and made it to s-on and tried some custom roms but all roms were giving the same error that the bootimage can not be created so then a local developer somehow managed to write the rom through J-TACK but the camera & wifi are still not working so i dont wanna go this way again... so any better idea???
Click to expand...
Click to collapse
No htcdev cannot turn s-off to.s-on. You said you tried it last time and it made it s-on. But I guess you tried the write secureflag command also.
If you don't want to unlock, then don't unlock it, just flash another hboot.
EM|NEM said:
you're s-off. dont think you need to unlock bootloader. if you're looking for something close to stock I'd recommend you look into this rom. I know its not stock but its much better. you wont lose 3d capabilities as its sense 3.6.
If you insist on stock then you might wanna run an RUU and get back to stock. Get the "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe" ruu. Most of the phones in pak come from Europe
Click to expand...
Click to collapse
I tried your 'RUU' link and tried the .exe file but it gave error that it cannot be updated... I'll try the zip file 2day.
I have tried different roms like firstly sad ics then yoda ics nd now running cool ics for gsm but infacr camera is not working at Ll i have updated all tue kernals and firmware and the rom but camera still not working wats its sol??? How can i make it work???
if you have camera problems with every rom then its probably a hardware issue
Related
hi, can you teach me how to start a fresh flash on this unit? I bought an EVO 3D in hongkong and it has a goapk chinese custom rom and i wanna update the rom and the hboot to the latest if not the best one out there. i used to flash rom on htc hd2 android but i already forgot the sequence coz i think this one's different. can you give me a checklist how to fresh install the custom rom i downloaded? i have Stock Rooted Roms with SuperUser 2.08.651.2 Update (2.3.4) coz i don't like the modded versions, i just need the tweaks and roots, etc.
as of now, my idea is to install a stock rom to update the hboot version, then install a custom recovery, so i can install the custom rom. can you also guide me on what's the best/latest recovery out there?
thanks!
domon07 said:
hi, can you teach me how to start a fresh flash on this unit? I bought an EVO 3D in hongkong and it has a goapk chinese custom rom and i wanna update the rom and the hboot to the latest if not the best one out there. i used to flash rom on htc hd2 android but i already forgot the sequence coz i think this one's different. can you give me a checklist how to fresh install the custom rom i downloaded? i have Stock Rooted Roms with SuperUser 2.08.651.2 Update (2.3.4) coz i don't like the modded versions, i just need the tweaks and roots, etc.
as of now, my idea is to install a stock rom to update the hboot version, then install a custom recovery, so i can install the custom rom. can you also guide me on what's the best/latest recovery out there?
thanks!
Click to expand...
Click to collapse
Look in the Dev section under the stickies there is loads of info on what your looking for
reaper24 said:
Look in the Dev section under the stickies there is loads of info on what your looking for
Click to expand...
Click to collapse
yeah, i know where to find them but i don't know where to start. i think i can install a custom rom right away coz i saw my hboot 1.49 has the revolutionary cwm but i'm not sure if there's a better cwm out there. i also wanna be informed if there's a perfect stock rom out there if there's any coz like back when i still have my hd2, there's a camera issue on sense 3.0 port or sense bug in gingerbread roms, etc.. i don't wanna waste my time reading all the threads here just to learn all that if someone out there already know the answer in just 1sentence. i hope you got my point. that's why i posted in this q&a section.
domon07 said:
yeah, i know where to find them but i don't know where to start. i think i can install a custom rom right away coz i saw my hboot 1.49 has the revolutionary cwm but i'm not sure if there's a better cwm out there. i also wanna be informed if there's a perfect stock rom out there if there's any coz like back when i still have my hd2, there's a camera issue on sense 3.0 port or sense bug in gingerbread roms, etc.. i don't wanna waste my time reading all the threads here just to learn all that if someone out there already know the answer in just 1sentence. i hope you got my point. that's why i posted in this q&a section.
Click to expand...
Click to collapse
Doing the research is part of what you need to do. Now I would be really careful due to the fact of where your device is from. Spend a few hours and do the research. There is no one sentence answer. Each device is different a.d can react differently
zelendel said:
Doing the research is part of what you need to do. Now I would be really careful due to the fact of where your device is from. Spend a few hours and do the research. There is no one sentence answer. Each device is different a.d can react differently
Click to expand...
Click to collapse
at least you made a point. my device is gold instead of red. i got it in hongkong but the box is not in english nor chinese (france i think, i'll check on it). it's already unlocked and has custom rom on it that's why i just wanna know directly from the experienced if installing a stock rom/ruu will update the hboot version so i can install the latest cwr, or will it lock my device and/or bootloader. in htc hd2, there are different versions of rom like cwr with recovery 150, 400, etc.. i'm not sure if it's still the same in evo 3d.
What I did......
My device initial status is was unlocked, rooted, customized rom and recovery, S-On and Hboot 1.49.018.
What i did was i downgraded my Hboot version so I can use Revolutionary tool to S-OFF my device(it didn't root my device upon checking with root checker app. Revolutionary tool only has beta keys for 1.49.007 & 1.49.008 so i downgraded to .007.
To downgrade, change the CID to HTC__001. I checked mine using a CID getter app and it was was HTC_027 (France, I think).
To change the cid, use fastboot command (you can download it along with adb.exe). If your device is still locked, "I think" you need to unlock it first using htcdev's tool.
After changing CID, I flashed the official rom PG86IMG.zip with 1.49.007 hboot by putting the zip file on the root of your SD then boot in bootloader by holding vol down while powering the evo 3d on. It will not work if fastboot settings is checked on htc settings.
After flashing, it booted normally(it asked me to setup my device). I downloaded a file explorer to rename the PG86IMG.zip so when I boot into bootloader, it will not extract the official rom again and ask me if I wanna flash(again) the rom, of course i will say no. I booted into bootloader to check the hboot version which is now on 1.49.007. I think the boot loader will be "relocked" too(sorry, i forgot).
I can then request the beta keys so I can use it in Revolutionary tool to S-OFF the device (I have to check if it roots the device too).
The tool asked me if I want to install the Revolutionary Recovery which I pressed yes so I can install custom firmwares(Internet connection required). After the process, the unlocked status from bootloader now says revolutionary.
I powered my device and update Over-the-air but it got stuck to triangle-!-android robot. Maybe because I have the custom recovery (revolutionary). So i flashed the PG86IMG.zip again through bootloader, it removed the custom recovery i installed from revolutionary tool but it will stay S-OFF. I've yet to check the lock/unlock status of the bootloader since i can't restart my evo 3d coz I'm downloading a 2Gb file but I think it's relocked.
After flashing for the second time and booting it again, set it up, I tried updating again through software updated and it updates the device successfully. It adds 3 nice free 3D Games.
I checked my bootloader status and my device went back to hboot 1.49.018 but still S-off.
Summary:
You can always install the official PG86IMG.zip with hboot 1.49.007 to downgrade the hboot version since the CID is still HTC_001 so you can use the Revolutionary tool to install the Custom Recovery to flash any GSM roms you like.
If you have an easiest route to acheive this, please let me know coz I'm not sure if I learn the most recent process or if it's old.
i have tried everything possible with this phone to root it and nothing. Was wondering if someone would help me out??
I feel your pain and I've try the HTC dev. unlock with no luck I'm coming from the OG evo which was really easy to root ..
Sent from my PG86100 using XDA Premium App
go to htcevohacks.com i hace hboot 1.5 and it worked perfectly if u have the newest upgrade tho i dont think they have a root method out yet
Htcevohacks is easiest . And with the newest ota its still hboot 1.5
Sent from my PG86100 using XDA App
brandonaspencer said:
i have tried everything possible with this phone to root it and nothing. Was wondering if someone would help me out??
Click to expand...
Click to collapse
It would help us if you told us exactly what problems you are having.
Cool!! thanks!!
Sent from my PG86100 using XDA Premium App
Look at the roll up stickies. The directions are pretty clear. HTC method is going to be your only option
Sent from my Galaxy Nexus using XDA App
Rooting phone
brandonaspencer said:
i have tried everything possible with this phone to root it and nothing. Was wondering if someone would help me out??
Click to expand...
Click to collapse
have kinda problems have you had with rooting your phone.
HTC evohacks is very easy thanks !! For the help : )
Sent from my PG86100 using XDA Premium App
yami951 said:
Look at the roll up stickies. The directions are pretty clear. HTC method is going to be your only option
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
I agree
Sent from my PG86100 using xda premium
Trying to root using HTC 1.5 with no success.
Hi to all I have tried to root using the HTC boot unlocker with no success. I was using the step by step instructions from HTC evo hacks. I got to the step at the command prompt where I put in the unlock code and I got this : C:\rootevo3dnew>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.007s]
finished. total time: 0.161s
The phone screen asking me to unlock the bootloader never came up. Any help would be appreciated. BTW I have rooted at least 7 EVO 3D's. with no problems.
I'm stumped.
lilal100 said:
The phone screen asking me to unlock the bootloader never came up. Any help would be appreciated. BTW I have rooted at least 7 EVO 3D's. with no problems.
Click to expand...
Click to collapse
See the Guide/flashing Notes in my signature. You need to rerun the currently installed "FULL" Ruu or the the Latest RUU, then the unlock will work.
I did the HTCDev and unlocked it went to thread on downgrade from 1.5 hboot to 1.4 tried that and it did not work. I went to try the wire trick and this is what I get when I try to use the controlbear. the phone connects and goes through process but says the following...
======== ControlBear 0.6 beta for JuopunutBear S-OFF ==========
Starting up......
Connecting to device...
Searching device.....
Found device.....but device has no root!!
Press ENTER to exit.....
Any help would be helpful I have tried superuser but wont install, tried rootevo3dnew, temproot sensation Ect. everything says I need to be rooted.
I am running stock rom that shipped with phone and yes I did updates. I am Sprint CDMA 2.17 rom shipped, 1.5 Hboot. I have flashed roms and modded before but dont consider myself to be advanced. I have done flashing and installing roms with my old HTC Touch pro2 but alot easier on touch pro2 LOL... Please point me in the correct place I have beeen all over from this thread to that one and back and forth and yes I have search threads and I have tried them but still come back to the one with wire trick.. I am 1.5 with S-ON
inkjammer said:
I did the HTCDev and unlocked it went to thread on downgrade from 1.5 hboot to 1.4 tried that and it did not work. I went to try the wire trick and this is what I get when I try to use the controlbear. the phone connects and goes through process but says the following...
======== ControlBear 0.6 beta for JuopunutBear S-OFF ==========
Starting up......
Connecting to device...
Searching device.....
Found device.....but device has no root!!
Press ENTER to exit.....
Any help would be helpful I have tried superuser but wont install, tried rootevo3dnew, temproot sensation Ect. everything says I need to be rooted.
I am running stock rom that shipped with phone and yes I did updates. I am Sprint CDMA 2.17 rom shipped, 1.5 Hboot. I have flashed roms and modded before but dont consider myself to be advanced. I have done flashing and installing roms with my old HTC Touch pro2 but alot easier on touch pro2 LOL... Please point me in the correct place I have beeen all over from this thread to that one and back and forth and yes I have search threads and I have tried them but still come back to the one with wire trick.. I am 1.5 with S-ON
Click to expand...
Click to collapse
Ok, let's make sure we know where you are at to start with. When you use the vol and power button to boot to fastboot, does the phone show "unlocked". If not, I think you need to do the htc method again. I have not kept up recently, but I am not sure there is any method other than the HTC method that works every time for 1.5. I have used the HTC method on two phones without a problem, so that is the method I use.
Once you get that far, I used adb to push or flash the twrp image into the recovery section of the phone. Then you should be able to flash superuser via the install menu of twrp. There are threads that have detailed explanations on how this is done.
Yea, I had a bit of a learning curve from my TP2 also, but love this phone!
sonza said:
Ok, let's make sure we know where you are at to start with. When you use the vol and power button to boot to fastboot, does the phone show "unlocked". If not, I think you need to do the htc method again. I have not kept up recently, but I am not sure there is any method other than the HTC method that works every time for 1.5. I have used the HTC method on two phones without a problem, so that is the method I use.
Once you get that far, I used adb to push or flash the twrp image into the recovery section of the phone. Then you should be able to flash superuser via the install menu of twrp. There are threads that have detailed explanations on how this is done.
Yea, I had a bit of a learning curve from my TP2 also, but love this phone!
Click to expand...
Click to collapse
I am unlocked I did the HTC Dev and unlocked it. I have a stock rom (the one shipped on phone) all I have done is unlock it... I did try the controlbear and got what I posted on last post. I am Hboot 1.5 S-ON and stock rom is 2.17.651.5 HTC Sense 3.0 ANDROID Ver. 2.3.4... Like I said all I have done is Unlock and installed TWRP 2.2 and created a restore point and created a recovery and backed up my phone. All through Goo Manager. That is all I have done.
inkjammer said:
I am unlocked I did the HTC Dev and unlocked it. I have a stock rom (the one shipped on phone) all I have done is unlock it... I did try the controlbear and got what I posted on last post. I am Hboot 1.5 S-ON and stock rom is 2.17.651.5 HTC Sense 3.0 ANDROID Ver. 2.3.4... Like I said all I have done is Unlock and installed TWRP 2.2 and created a restore point and created a recovery and backed up my phone. All through Goo Manager. That is all I have done.
Click to expand...
Click to collapse
In my post Ive included a flashable SuperSU zip. What youll need to do is boot to recovery and install this zip. Then reboot. You should have superuser access then.
Still learning this forum so excuse any errors I make. I've spent the last 10 hours trying to fix the mess I created on my wife's Evo 3d. I was able to root my phone and it was relatively easy so I tackled hers as well and have gotten a bootloop I cannot figure out, 10 hours later. I'm on hboot 1.5. I unlocked the phone (using a pretty reliable video), loaded 4EXT Recovery then tried to load roms. Everything worked fine until the rom-loading portion. Since then, the phone loops, but once or twice it made it all the way to the main screen and before I could slide the ring, a read error message appeared next to the bars of service then the phone just completely reboots. Right now, the only thing I can get into is the bootloader and the clockworkmod v4.0.1.4, somehow I lost my 4EXT Recovery. I'm stuck and in dire straights as my wife is going out of town and will KILL me if I don't fix her phone. Please help! BTW, somehow I managed to NOT back anything up (stupidity on my part). Will I be able to get this thing back to stock at least or is it now a paperweight?
user22410 said:
Still learning this forum so excuse any errors I make. I've spent the last 10 hours trying to fix the mess I created on my wife's Evo 3d. I was able to root my phone and it was relatively easy so I tackled hers as well and have gotten a bootloop I cannot figure out, 10 hours later. I'm on hboot 1.5. I unlocked the phone (using a pretty reliable video), loaded 4EXT Recovery then tried to load roms. Everything worked fine until the rom-loading portion. Since then, the phone loops, but once or twice it made it all the way to the main screen and before I could slide the ring, a read error message appeared next to the bars of service then the phone just completely reboots. Right now, the only thing I can get into is the bootloader and the clockworkmod v4.0.1.4, somehow I lost my 4EXT Recovery. I'm stuck and in dire straights as my wife is going out of town and will KILL me if I don't fix her phone. Please help! BTW, somehow I managed to NOT back anything up (stupidity on my part). Will I be able to get this thing back to stock at least or is it now a paperweight?
Click to expand...
Click to collapse
Your not bricked by any means. And Im going to guess you tried to boot an ICS rom.. dont. They dont work with hboot 1.5. If you really want to go back to stock run the 2.17 RUU and youll be back to where you started. Another option is to download a GB rom and flash that. Not ICS. If your able to get to the bootloader than you can still load up 4ext recovery so you can flash the GB rom.
Edit: some hboot 1.5 users are lucky and can flash them if they used the correct VM firmware but majority of users have problems.
NineInchNails said:
Your not bricked by any means. And Im going to guess you tried to boot an ICS rom.. dont. They dont work with hboot 1.5. If you really want to go back to stock run the 2.17 RUU and youll be back to where you started. Another option is to download a GB rom and flash that. Not ICS. If your able to get to the bootloader than you can still load up 4ext recovery so you can flash the GB rom.
Edit: some hboot 1.5 users are lucky and can flash them if they used the correct VM firmware but majority of users have problems.
Click to expand...
Click to collapse
Thanks, I just tried flashing a rom that has taken it back to stock but I'm still in the bootloop. Should I stop flashing and simply locate the RUU?
22410,
It sounds like the kernel did not flash correctly with 4ext Recovery (next time, make sure u indicat S-on in its settings). I'm not sure if you were just stock 2.17 rooted or not, but use 7zip on your pc to open & extract/copy out the "boot.img" file from the rom, zip, etc you were using and copy it to your fastboot pc folder. Still have the Cwm 4.0.1.4 recovery.IMG file there too right (or the 4ext recovery.img file)? Ok...
- put phone in fastboot usb mode
From PC's fastboot command prompt type:
- " fastboot flash boot boot.img "
(this will reflash the kernel/boot image extracted from a rom)
If your recovery is screwed up:
- " fastboot flash recovery YourRecoveryFilename.img "
(ie: cwm_4.0.1.4_recovery.img or recovery.img, etc as listed in fastboot folder, to reflash a recovery to your phone).
With S-on, to properly enter a recovery for flashing ANYTHING you must:
- " fastboot boot YourRecoveryFilename.img "
(doesn't apply if using 4ext's Smartflash or TWRP's Dumlock settings. But you must have a bootable android OS/kernel first, once the flash is screwed it won't work).
If u have a Sprint CDMA EVO3D/HTC Unlocked & S-on (not Jbear s-Off), then the guide in my signature has more info.
Edit: as NIN said you will likely have problems flashing ICS roms with S-on (hboot version doesn't matter). If u are still unlocked & have a working recovery u can flash any gb Rom successfully after wiping system, data, & cache (or run superwipe zip). Meanrom GB v4.5 recommended.
Sent from my "Up all night, Sleep all day" EVO3D!
Hello
My Evo 3d is S-ON with 1.490018 Hboot, i was running Mwakious V10 with anryl Kernel. Everything went well but after playing with rom toolbox i crashed my phone.
My problem is that i can only flash a GB Rom lik LeeDroid and cant go back to an ICS one.
My phone keeps boot looping even if I flash boot.img from the rom i want to instal after the flash... Bootloops too when trying to flash with for ext ant smartflash on...
Is there something i forget after all this goot time on mwakious rom without touch anything ???
i tryed new makious rom and ioda ics rom and issue is the same...
I have an extra question : I i want to install RUU RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe in order to restard from scratch with a clean official ics rom, do i need to relock the bootloader ?
thank 4 help :cyclops:
Did you at any point update your firmware to the new ics one? if not then do it and try an ics rom. most of the newer ics roms require the new firmware.
http://d-h.st/Mf1
and as for RUU, yes you need to relock before running it. I would recommend you get s-off as its quite easy with your hboot. saves you trouble down the road
EM|NEM said:
Did you at any point update your firmware to the new ics one? if not then do it and try an ics rom. most of the newer ics roms require the new firmware.
http://d-h.st/Mf1
and as for RUU, yes you need to relock before running it. I would recommend you get s-off as its quite easy with your hboot. saves you trouble down the road
Click to expand...
Click to collapse
Hello,
you confirmed my thoughts about firmware as i can only run old releases of ics roms, for example i was used to have the mwakious one V11 with boot.omg from V7, but for now i deleted my backups and files are not avaliable on mwakious thread :crying:
i cannot update firmware as i am s-on, right ? is see this seems to work on recent hboot : http://forum.xda-developers.com/showthread.php?t=1796625 but don't know if it will work with 1.49.0018 (I must read the full thread before asking .
I tryed to do the wire trick from http://forum.xda-developers.com/showthread.php?t=1743466 but did not work even with help of another member...
that's why i wanted to flash an ics ruu to begin update all and begin from scratch... but after relocked the bootloader phone won't boot to android so ruu doesn't work
as the wire trick did not work i want to try to downgrade with Free3Vo tool (sorry i don't remeber the thread) or this method http://forum.xda-developers.com/showthread.php?t=1471246 ....
tarassor said:
Hello,
you confirmed my thoughts about firmware as i can only run old releases of ics roms, for example i was used to have the mwakious one V11 with boot.omg from V7, but for now i deleted my backups and files are not avaliable on mwakious thread :crying:
i cannot update firmware as i am s-on, right ? is see this seems to work on recent hboot : http://forum.xda-developers.com/showthread.php?t=1796625 but don't know if it will work with 1.49.0018 (I must read the full thread before asking .
I tryed to do the wire trick from http://forum.xda-developers.com/showthread.php?t=1743466 but did not work even with help of another member...
that's why i wanted to flash an ics ruu to begin update all and begin from scratch... but after relocked the bootloader phone won't boot to android so ruu doesn't work
as the wire trick did not work i want to try to downgrade with Free3Vo tool (sorry i don't remeber the thread) or this method http://forum.xda-developers.com/showthread.php?t=1471246 ....
Click to expand...
Click to collapse
If nothing works for you then Relock the bootloader -> again boot into bootloader -> select fastboot -> connect to PC (phone should show "fastboot USB") -> then RUN RUU.exe.
RUU works even when phone is in "fastboot USB" mode. Make sure you use the RUU made for your phone/region and the battery is charged enough.
If you would like to attempt the downgrade method then try this
http://forum.xda-developers.com/showthread.php?t=1495657
Worked flawlessly for me. Just make sure you have a valid cid
mnomaanw said:
If nothing is working for you then Relock the bootloader -> again boot into bootloader -> select fastboot -> connect to PC (phone should show "fastboot USB") -> then RUN RUU.exe.
RUU works even when phone is in "fastboot USB" mode. Make sure you use the RUU made for your phone/region and the battery is charged enough.
Click to expand...
Click to collapse
i choose this one, RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
My evo 3d is an unbranded european (CID 203), i will try into fastboot when i have some time to do.. thank for the tips, i will report as soon i try !
EM|NEM said:
If you would like to attempt the downgrade method then try this
http://forum.xda-developers.com/showthread.php?t=1495657
Worked flawlessly for me. Just make sure you have a valid cid
Click to expand...
Click to collapse
i downloded it will see, my CID is 203, have not time today... btw thank you and happy new year
I bought Evo which was already upgraded to ICS (OTA I assume), and it was branded I think. I've unlocked it via HTCDev, flashed '4ext touch recovery' and then rooted. Then I flashed MIUI ICS ROM, and everything is OK for now.
I want to use BootManager to flash multiple ROMs. It requires s-off. I tried it already with s-on, because I've read that SmartFlash (from 4ext recovery) makes my phone like s-off, so ROM on SD card installed, but won't boot. I had many problems going back to my Phone ROM, I restored my backup, wiped many times, installed fresh ROM and still had a bootloop. Finally I got it working again by flashing boot.img via fastboot (glad I did nandroid backup before). I didn't try again with different ROM, because after 2 hours of trying to recover my base ROM I've had enough. So I'm pretty sure BootManager will work better if my phone will be s-off.
So my question is - what to do next? We have so many guides and different comments here, sometimes the same method works for one, and doesn't work for another one, and I'm really confused.
I assume I should follow the instructions here http://forum.xda-developers.com/showthread.php?t=1743466 but I don't understand few things:
friend.evil said:
flash an ICS ROM from recovery(Method B from 10 to 14)
open ICS ROM.zip and extract boot.img to a folder which contains adb, fastboot and AdbWinApi.dll
go to fastboot and type:
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Do I have to do this if I'm already have MIUI with root privileges? Do I still need that boot.img from MIUI, and put it together with fastboot.exe?
Or should I restore stock ICS? I'm pretty sure I did nandroid backup before flashing MIUI.
friend.evil said:
12_Notice when you s-off the phone the hboot is corrupted i advice after s-off to follow the methods In E_(from 1 to 4)
Click to expand...
Click to collapse
Do I need to fix hboot after s-off? What hboot version I have after doing steps 1 to 4 from section E? There's a big zip file (PG86IMG.zip), is it another ROM or what?
And most important question - if method D doesn't work, method F is recommended, but:
elias17 said:
Hboot s on will only flash roms that are based on ics 3.28xx and sense 4 roms using a special boot.img ! U can never flash GB roms until u go s off like i did its a tricky process but it works and now i can flash any rom in the gsm section
Click to expand...
Click to collapse
friend.evil said:
2_flash Leedroid GB ROM from recovery http://leedroid.ftp.rshost.eu/Shoote....zip(Don't forget to wipe data/factory reset and wipe cache + dalvik)
Click to expand...
Click to collapse
I don't get it - can I flash GB ROM or not if I have hboot 1.53.0007 s-on? Can I use method F if method D fail?
Sorry for my english, I'm from Poland.
Thanks in advance for any tip.
You're confusing yourself, What you need to do my friend is.
1. Download RUU, Run RUU
2. HTC Unlock bootloader again
3. Do the Juopunutbear Wiretrick to get s-off
4. Download the 1.04 ENG hboot (There is one of those for the GSM I think... not sure though)
5. Flash a badass Android 4.2.1 rom. They work.
There's much more detailed guides on what to do, BUT This is a summary of what you want.
Be sure to hit thanks [= I'm almost to 100
Which RUU should I search for? GB or ICS?
But isn't the 1+2 the same as restoring my ICS Stock ROM from backup?
I think hboot 1.49.0007 would be enough, I've read that BootManager works well with that version.
1. Yes you can just restore your stock ics backup BUT you will have to root it using the file provided in method B.
2. Yes the 1.49.0007 hboot is best for gsm
3. You can flash a GB rom with your hboot no problem. It just dont think it will boot. so technically you should be able to do the wire trick with a GB rom flashed(not booted into). You'll be in fastboot mode for the wiretrick. There are different files for GB and ICS when doing the wiretrick
Your best bet is to run an ICS RUU, unlock bootloader, root rom, do the wire trick, change hboot to 1.49.0007 and then flash any rom you want
Backup was made right after I made root, is it enough? I just don't want to go through the entire process from the beginning (unlocking, rooting etc).
mars28 said:
Backup was made right after I made root, is it enough? I just don't want to go through the entire process from the beginning (unlocking, rooting etc).
Click to expand...
Click to collapse
That should work But unlocking again is really easy
You should still have you unlock token in the same place,
You just plug up to the computer hop into fastboot usb and type
Fastboot flash unlocktoken Unlock_Code.bin
to unlock and then
fastboot flash recovery recovery.img
for a recovery,
Then move SU to your sd card and flash it in recovery.
Then your all ready for the wire trick, The more you do these things the more experience you get at them and the better you get with fastboot. I suggest you go through the process opposed to just restoring (First off it's much much safer) and you'll know the ropes if you (or anyone else) has this problem.
Maybe you're right. I'll try with RUU. But I see it's hard to find the correct one these days, some old links died. I have a file called "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed" which I have downloaded right before I started unlocking my Evo, could it be the correct one?
I didn't know I can use old "unlock_code.bin", I saw that everytime I read the token from the device, it was different. So I assumed that I have to flash bin that match the token.
mars28 said:
Maybe you're right. I'll try with RUU. But I see it's hard to find the correct one these days, some old links died. I have a file called "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed" which I have downloaded right before I started unlocking my Evo, could it be the correct one?
I didn't know I can use old "unlock_code.bin", I saw that everytime I read the token from the device, it was different. So I assumed that I have to flash bin that match the token.
Click to expand...
Click to collapse
The token and the unlock code are specific to the phone, And doesn't change until you get a new phone.
And that seems to be the right one, Do you live in Europe? lol Shooter u means GSM and ICS means it's the latest RUU.
mars28 said:
Maybe you're right. I'll try with RUU. But I see it's hard to find the correct one these days, some old links died. I have a file called "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed" which I have downloaded right before I started unlocking my Evo, could it be the correct one?
I didn't know I can use old "unlock_code.bin", I saw that everytime I read the token from the device, it was different. So I assumed that I have to flash bin that match the token.
Click to expand...
Click to collapse
you can easily get a new token from htc dev web site
Sent from my HTC EVO 3D X515m using xda app-developers app
Can't_Live_Without_My_Evo said:
And that seems to be the right one, Do you live in Europe? lol Shooter u means GSM and ICS means it's the latest RUU.
Click to expand...
Click to collapse
I know I use shooter_u, I asked because I've found another RUU which have "Rogers_WWE" in name of the file, and the rest of the file name is identical, and I remember that I had to choose "rogers" when I was unlocking via htcdev. That's why I wasn't 100% sure if I had to choose "HTC_Europe" or "Rogers_WWE".
Another thing which confuses me:
http://forum.xda-developers.com/showthread.php?t=1495358
mpgrimm2 said:
Note 3: If you previously did the HTC Unlock, you'd have to "RELOCK" BEFORE running the RUU.
To do this from fastboot type: fastboot oem lock
Click to expand...
Click to collapse
Should I do this or start directly with RUU.exe? My phone is currently "UNLOCKED, hboot 1.53.0007, s-on".
And what about CID? I've read somewhere that I have to change to supercid or something, to be able to flash zips via fastboot. How to check my current CID?
Search for cid getter on play store to get your cid
You certainly need to relock you hboot before running RUU. For the correct ruu you should check the box that your phone came in. It should have the details (atleast i think so)
P.S. you probably don't need to change cid. Infact i'd recommend you not to do that just yet
Got the CID, it's HTC__032. I want to be prepared, who knows what might come up during the whole process.
friend.evil said:
12_Notice when you s-off the phone the hboot is corrupted i advice after s-off to follow the methods In E_(from 1 to 4)
Click to expand...
Click to collapse
What means "corrupted"? Phone won't boot or what?
Eeh, if I knew that hboot 1.53.x is so problematic, I would buy Evo with GB on-board.
mars28 said:
Got the CID, it's HTC__032. I want to be prepared, who knows what might come up during the whole process.
What means "corrupted"? Phone won't boot or what?
Eeh, if I knew that hboot 1.53.x is so problematic, I would buy Evo with GB on-board.
Click to expand...
Click to collapse
I think yours might be an european model. i had the exact same cid as yours.
when you get to that step of corrupted hboot just follow the steps on this thread and flash hboot 1.49.0007
http://forum.xda-developers.com/showthread.php?t=1906172
Cant kive without my evis comments about the wire trick are bang on. It will fix everything. Having s-off is just much easier so do the wire trick. It will work. My wife and I both have an evo. I had to do the wire trick twice on hers for it to work and four times on mine for it to work. Be patient if it fails the first few times. And if the screen gets stuck on the jounuo whatever screen you can fix that.
If you are stuck at Juopunutbear screen and if you can go to bootloader you need to connect the phone to pc, go to fastboot ( should say fastboot usb)*Go to controlbear folder (from where you ran controlbear to begin withon you pc then open command window in it (hold shift and right click, that willopen command window rigjt there and then*when you get into it you need to enter:
"ControlBear.exe -f" no quotes or "ControlBear f" notice the space after the exe !
Lots of peopke forget to put it in and say it didnt work.
I presume this will fix the problem
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
My phone is now s-off. I didn't flash RUU, just restored stock rooted ROM from backup, did the wire trick (just one time, surprisingly) and everything went nice and smooth. Then I flashed hboot 1.49.0007 with no problems at all. Thanks guys for the tips.
One more thing - my phone state is now "LOCKED" - should I bother?
So I got what I wanted - I've installed ROM in BootManager (the one which doesn't boot before, while phone was 's-on') and this time it booted from SD. Today I'll try more ROMs in BootManager.
Locked doesn't matter as long as you are s-off. It only creates problems if you ever plan on using fastboot commands. Trust me, you dont need to bother with it
But if you really want to know heres a quote from ramjet where he explains it a bit.
ramjet73 said:
Once the RUU.exe is run and the stock bootloader is installed, the phone will be bootloader S-ON regardless of the radio S-OFF status. To run fastboot commands like "flash" and "erase" the stock bootloader needs to be unlocked by the htcdev method or a custom bootloader modified to support those commands needs to be flashed, which requires radio S-OFF.
Click to expand...
Click to collapse
I was given a phone to try to resurrect from the dead. It powers on directly to the bootloader screen and does no more. I really know nothing about this phone model. Before I start, I want to know if it is even possible. The screen says the following:
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
And then there are the normal bootloader options. Can this thing be saved?
silenthatred said:
I was given a phone to try to resurrect from the dead. It powers on directly to the bootloader screen and does no more. I really know nothing about this phone model. Before I start, I want to know if it is even possible. The screen says the following:
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
And then there are the normal bootloader options. Can this thing be saved?
Click to expand...
Click to collapse
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
wloftus said:
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
Click to expand...
Click to collapse
Thanks, it does show fastboot usb...find your token? Not sure what that means. I'll search around a bit when I get home. My original Evo 4G I did root, but don't remember that part.
silenthatred said:
Thanks, it does show fastboot usb...find your token? Not sure what that means. I'll search around a bit when I get home. My original Evo 4G I did root, but don't remember that part.
Click to expand...
Click to collapse
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Unknownforce said:
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Click to expand...
Click to collapse
RUU.EXE finds it and then gets to the restarting into bootloader step and the phone restarts. Then it just saying waiting for bootloader until it times out, but the bootloader is up on the phone.
silenthatred said:
RUU.EXE finds it and then gets to the restarting into bootloader step and the phone restarts. Then it just saying waiting for bootloader until it times out, but the bootloader is up on the phone.
Click to expand...
Click to collapse
This happens sometimes if you have a custom bootloader installed when you flash the RUU. Just cancel the Windows task and restart it and you should be fine.
ramjet73
wloftus said:
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
Click to expand...
Click to collapse
Unknownforce said:
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Click to expand...
Click to collapse
Couple things since I have looked into this a little more. Despite it saying Sprint on the front, it is a Virgin Mobile phone. It has the OTA that came down on it, so I can't flash the older RUU. It says it is an older version. So it looks like unlocking the bootloader is my only option? Question is, how do I do that from the bootloader? I was able to get the token and have the unlock_code.bin file, but the instructions to flash it seem to rely on having a working ROM to complete it, which I don't have. The phone is stuck in a bootloader loop. S-OFF, I have the answer. But it is S-ON, so not sure what to do.
silenthatred said:
Couple things since I have looked into this a little more. Despite it saying Sprint on the front, it is a Virgin Mobile phone. It has the OTA that came down on it, so I can't flash the older RUU. It says it is an older version. So it looks like unlocking the bootloader is my only option? Question is, how do I do that from the bootloader? I was able to get the token and have the unlock_code.bin file, but the instructions to flash it seem to rely on having a working ROM to complete it, which I don't have. The phone is stuck in a bootloader loop. S-OFF, I have the answer. But it is S-ON, so not sure what to do.
Click to expand...
Click to collapse
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
ramjet73 said:
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
Click to expand...
Click to collapse
It flashes unlock_code.bin to the phone successfully, but the next steps say to click yes on the screen to unlock on the phone. Can't access that without a working ROM. I'll try unknownforce's method when I get home, thanks for the help!
ramjet73 said:
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
Click to expand...
Click to collapse
Why is this? Is there not a full RUU for the latest version?
ramjet73 said:
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
Click to expand...
Click to collapse
You still have to brick the device for this and I haven't been able to brick it without using a full RUU flash, which he apparently can't do?
silenthatred said:
It flashes unlock_code.bin to the phone successfully, but the next steps say to click yes on the screen to unlock on the phone. Can't access that without a working ROM. I'll try unknownforce's method when I get home, thanks for the help!
Click to expand...
Click to collapse
Does it still say ** LOCKED ** Or does it say ** UNLOCKED ** now?
Unknownforce said:
Why is this? Is there not a full RUU for the latest version?
Click to expand...
Click to collapse
No. Virgin Mobile released an OTA update in November but there's no RUU that corresponds to it available yet. Fortunately, the bootloader version didn't change so the original RUU can be flashed with S-ON if the mainver is set low, but you need to be unlocked and rooted already to flash the zip file that does that.
You still have to brick the device for this and I haven't been able to brick it without using a full RUU flash, which he apparently can't do?
Click to expand...
Click to collapse
That would be a problem for him then. I don't know of anyway to flash the RUU with S-ON after the OTA has been installed if the bootloader is actually locked and he can't unlock it.
ramjet73
Yeah, not looking good. Thanks for the help though!