hello i have two question :
1) can i update my rooted galaxy s2 to 4.1.2 without deleting all my data and preserving my root??
2) i can t find an 4.1.2 software for my s2 because:
versionDA:I9100JPLPC
PHONE:I9100XXLPW
CSC:I9100OJPLP9
so can i update my software to 4.1.2 ??? or can i change from jplpc to another so i can update??
thank you:fingers-crossed:
hadikh1 said:
hello i have two question :
1) can i update my rooted galaxy s2 to 4.1.2 without deleting all my data and preserving my root??
2) i can t find an 4.1.2 software for my s2 because:
versionDA:I9100JPLPC
PHONE:I9100XXLPW
CSC:I9100OJPLP9
so can i update my software to 4.1.2 ??? or can i change from jplpc to another so i can update??
thank you:fingers-crossed:
Click to expand...
Click to collapse
You can use other based ROM that PhilZ & Jeboo kernels support. Then, flash their kernels that root your device. (see their OP for viewing support Rom)
hadikh1 said:
1) can i update my rooted galaxy s2 to 4.1.2 without deleting all my data and preserving my root??
Click to expand...
Click to collapse
There is very little chance of updating to 4.1.2 manually without losing your data. If you had an OTA update, you wouldn't lose data.
As for flashing via Odin, it is recommended to wipe data when moving from ICS to JB.
But you can always backup data and apps, and simply restore them after updating!
You will lose root too, unless you flash the firmware by Mobile Odin with 'Ever Root' option selected.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 07:07 AM ---------- Previous post was at 07:03 AM ----------
hadikh1 said:
2) i can t find an 4.1.2 software for my s2
so can i update my software to 4.1.2 ??? or can i change from jplpc to another so i can update??
Click to expand...
Click to collapse
Yes, you can update to 4.1.2 by flashing a firmware for another region, and then try to change the CSC after the update.
But I don't know if Arabic language will be there on other region's firmware.
"To err is human, to forgive is divine"
Sent from my SGS II
hadikh1 said:
hello i have two question :
1) can i update my rooted galaxy s2 to 4.1.2 without deleting all my data and preserving my root??
2) i can t find an 4.1.2 software for my s2 because:
versionDA:I9100JPLPC
PHONE:I9100XXLPW
CSC:I9100OJPLP9
so can i update my software to 4.1.2 ??? or can i change from jplpc to another so i can update??
thank you:fingers-crossed:
Click to expand...
Click to collapse
By rooting galaxy s2 4.1.2, you can have a full control over it. In addition, it also allows you to run custom ROMs on your device in future.
superbut said:
By rooting galaxy s2 4.1.2, you can have a full control over it. In addition, it also allows you to run custom ROMs on your device in future.
Click to expand...
Click to collapse
Did you look at the date he posted his question?
There is very little chance of updating to 4.1.2 manually without losing your data. If you had an OTA update, you wouldn't lose data.
As for flashing via Odin, it is recommended to wipe data when moving from ICS to JB.
But you can always backup data and apps, and simply restore them after updating!
You will lose root too, unless you flash the firmware by Mobile Odin with 'Ever Root' option selected.
Click to expand...
Click to collapse
can u please explain to me what is "ever root" and how to use it?
Yes, you can update to 4.1.2 by flashing a firmware for another region, and then try to change the CSC after the update.
But I don't know if Arabic language will be there on other region's firmware
Click to expand...
Click to collapse
and can you please tell me how to flash my firmware to another region and change my CSC??
thank you
hadikh1 said:
can u please explain to me what is "ever root" and how to use it?
Click to expand...
Click to collapse
Ever root allows you to root a stock firmware while it is being flashed by Mobile Odin. So u don't need to root it afterwards.
For more info, check out the Mobile Odin thread.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 08:10 AM ---------- Previous post was at 08:07 AM ----------
hadikh1 said:
and can you please tell me how to flash my firmware to another region and change my CSC??
thank you
Click to expand...
Click to collapse
Ur from Saudi Arabia, right?
JB 4.1.2 has been released for ur country:
http://www.sammobile.com/firmwares/1/?model=GT-I9100&pcode=KSA#firmware
"To err is human, to forgive is divine"
Sent from my SGS II
hello i have a samsung galaxy s2, with 4.0.3
I9100bulp6
IML74K.BULPC.
i want to update to 4.1.2, i dont care if i lose something from device, just how i do it?
ty
vladxxx said:
hello i have a samsung galaxy s2, with 4.0.3
I9100bulp6
IML74K.BULPC.
i want to update to 4.1.2, i dont care if i lose something from device, just how i do it?
ty
Click to expand...
Click to collapse
cute
Sent from the little guy
vladxxx said:
hello i have a samsung galaxy s2, with 4.0.3
I9100bulp6
IML74K.BULPC.
i want to update to 4.1.2, i dont care if i lose something from device, just how i do it?
ty
Click to expand...
Click to collapse
U can try the method of 'searching this forum'. That way, u don't need to lose anything from ur device!
"To err is human, to forgive is divine"
Sent from my SGS II
its ok if im not loseing, but i'm new and i cant find tutorial for this upgrade, if you can give me a hint will be nice.
ty
No good, try again.
Sent from the little guy
gastonw said:
No good, try again.
Sent from the little guy
Click to expand...
Click to collapse
meanwhile i resolve it..... i have update it
On the right path.
Sent from the little guy
Guys I'm new to mobile world & the forum won't allow me to create my own thread until I post 10 posts & I don't know what to post...!!! So I joined to this thread....
I owned the below phone.
Galaxy S2 I9100
Android version = 4.0.3
Build Number = IML74K.JPLPC
I need to upgrade this version to 4.1.2 jellybean.What should I have to do.
I have Odin downloaded to PC that's what I have now.Don't know what files it needed...!!!
Thanks.
Boy we got a bunch of threads about this regard.
Feel free to search & read.
Sent from the little guy
uchildh stage
Hi thanks
I'm going to follow this link.
smartphonesupdates.com/how-to-root-samsung-galaxy-s2
it says
Make sure that the device is already running the latest Android 4.1.2 ZSLSE Jelly Bean official firmware before proceeding with root procedure.
but I have ICS 4.0.3 does that Siyah-s2-v6.0b4 file supports which mentioned in his link?
gsmicro said:
I need to upgrade this version to 4.1.2 jellybean.What should I have to do.
Click to expand...
Click to collapse
gsmicro said:
Hi thanks
I'm going to follow this link.
smartphonesupdates.com/how-to-root-samsung-galaxy-s2
but I have ICS 4.0.3 does that Siyah-s2-v6.0b4 file supports which mentioned in his link?
Click to expand...
Click to collapse
Am confused..
You want to update to JB 4.1.2, or do u want to root ur phone?
"To err is human, to forgive is divine"
Sent from my SGS II
Hi friend
I want to update to JB 4.1.2.
Of course you do, that's why there are a lot of threads on how to do it
Sent from the little guy
Related
Hi!
I have searched this forum and readed all FAQ-s, bus still can't figure what to do in my case. Hope You can help me
So, my phone is
PDA: I9100XWLP7
Phone: I9100XXLPS
CSC: I9100EPLLP5
with ICS 4.0.3 (now rooted with CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5).
My problem is buggy bluetooth stack. I have even didn't notice any problem with bluetooth until buing new car radio with bluetooth (Sony DSX-A50BT). After paring this whit my phone all works well .... but only for 10-15 minutes. After this connection is reset and music player on phone stops. After some searching on the web, I have found that this kind of problem are typical for ICS 4.0.3 and some users reports they resolved it by upgrade to 4.0.4. Ok, but my problem is, that there is no official upgrade available for my phone! (via Kies).
I think is due to strange PDA code "LP7". I thing it is strange because it first letter should code year of production (L means 2012) and second letter should code mount (A for January, B for February etc.) But what mount is for P? (last mouth, December is L )
So I need a little help in answering question: could I safely flash stock ROM with ICS 4.0.4 intended for other PDA?
Could I do the same with some custom ROM?
Or maybe there is another way for fixing my buggy bluetooth? (I have read that some user fixed this problem by replacing four bluetooth related files in his ICS 4.0.3 phone with files extracted from ICS 4.0.4. Unfortunately they didn't say how to extract those files and neither what files he replaced!)
Thanks in advance for any suggestions.
elk84 said:
Hi!
So I need a little help in answering question: could I safely flash stock ROM with ICS 4.0.4 intended for other PDA?
Could I do the same with some custom ROM?
Or maybe there is another way for fixing my buggy bluetooth?
Click to expand...
Click to collapse
You can find all official firmwares from sammobile.com.
Yes, you can flash any stock ICS 4.0.4 or custom ROM as long as you are sure its meant for ur device i9100 and there is no carrier branding.
But why go for ICS 4.0.4 when you can flash JB 4.1.2?
"To err is human, to forgive is divine"
Sent from my SGS II
yeah...you don't wanna go 4.0.4.....
Sent from the little guy
immortalneo said:
You can find all official firmwares from sammobile.com.
Yes, you can flash any stock ICS 4.0.4 or custom ROM as long as you are sure its meant for ur device i9100 and there is no carrier branding.
But why go for ICS 4.0.4 when you can flash JB 4.1.2?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thank you for your replay, but how could I be sure about this? I mean "there is no branding". I bought my phone over internet and it has no carrier software or logos, but I didn't know for sure.
BTW. Did JB 4.1.2 has reliable bluetooth?
elk84 said:
Thank you for your replay, but how could I be sure about this? I mean "there is no branding". I bought my phone over internet and it has no carrier software or logos, but I didn't know for sure.
BTW. Did JB 4.1.2 has reliable bluetooth?
Click to expand...
Click to collapse
That means ur phone is not carrier branded.
JB 4.1.2 has a lot more fixes and features than ICS 4.0.4. I suggest you give it a try first.
And some 4.0.4 kernels are affected by the 'brickbug', so u might wanna be careful too.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
That means ur phone is not carrier branded.
Click to expand...
Click to collapse
On sammobile web site I can find exact match for my phone as "Germany E-Plus". Did it means it is branded? (But on the phone itself I can't find any items from this particular carrier).
What can be consequences of flasing generic stock ROM on a branded phone? (I have risked and flashed my phone anyway - it seems all is ok, but I want do the same for my wife and my daugthers phones but they phones are definitively branded!)
UPDATE: Bluetooth problem seams to go away, but now I'm experiencing sleep of death.
Please help me!
I've a I9100 updated via Kies to Jelly Bean. I tried to root it but I used a wrong version, a one for the I9000G.
It worked for a while, but now it reboot for ever!!!
I downloaded the official Firmware from SamMobile and flash it (as PDA) by ODIN, but I didn't recovered, It bootloops again!
How can I solve this problem?
Is there a way to download the flash image (I didn't any backup prior to root ).
Thank you very much!
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
Please help me!
I've a I9100 updated via Kies to Jelly Bean. I tried to root it but I used a wrong version, a one for the I9000G.
It worked for a while, but now it reboot for ever!!!
I downloaded the official Firmware from SamMobile and flash it (as PDA) by ODIN, but I didn't recovered, It bootloops again!
How can I solve this problem?
Is there a way to download the flash image (I didn't any backup prior to root ).
Thank you very much!
Click to expand...
Click to collapse
Try reading this thread.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Try reading this thread.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thank you very much, but I've already solved my problem flashing an unbranded original firmware.
Now I've got only a problem : the updates via Kies are no more available. Why? The firmware is a stock firmware!
DareDevil73 said:
Thank you very much, but I've already solved my problem flashing an unbranded original firmware.
Now I've got only a problem : the updates via Kies are no more available. Why? The firmware is a stock firmware!
Click to expand...
Click to collapse
I've had the pleasure of owning a Samsung smartphone since October 2010. With that, please trust me when I say this: Kies is rubbish! The amount of stuff this program installs into your PC to do what's easily done by connecting via Mass Storage mode? Nuts! The amount of time it spends trawling the net and using up vital battery power while it runs in background on your phone? Insane! The best way to have a i9100 (or any other Android device) running is with a custom ROM - that way you can at least remove any app or 'bloatware' you don't want before you bring the phone to life.
My advice? In short: totally clean out and factory reset your phone, flash the stock i9100 SamMobiles JB release using Odin, root your phone, choose a custom ROM that you like the look of, flash it in and then discover the brilliance of the i9100 that lies beneath the stock standard offering...
djshotty said:
I've had the pleasure of owning a Samsung smartphone since October 2010. With that, please trust me when I say this: Kies is rubbish! The amount of stuff this program installs into your PC to do what's easily done by connecting via Mass Storage mode? Nuts! The amount of time it spends trawling the net and using up vital battery power while it runs in background on your phone? Insane! The best way to have a i9100 (or any other Android device) running is with a custom ROM - that way you can at least remove any app or 'bloatware' you don't want before you bring the phone to life.
My advice? In short: totally clean out and factory reset your phone, flash the stock i9100 SamMobiles JB release using Odin, root your phone, choose a custom ROM that you like the look of, flash it in and then discover the brilliance of the i9100 that lies beneath the stock standard offering...
Click to expand...
Click to collapse
I agree with you, but there is a reason why I have to keep my phone with original software.
Is there a way to make it compatible again with Kies updates?
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
Thank you very much, but I've already solved my problem flashing an unbranded original firmware.
Now I've got only a problem : the updates via Kies are no more available. Why? The firmware is a stock firmware!
Click to expand...
Click to collapse
U have already upgraded to official jellybean right?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
U have already upgraded to official jellybean right?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Yes I do.
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
Yes I do.
Click to expand...
Click to collapse
Then how can u possibly get any more updates? u already have JB right..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Then how can u possibly get any more updates? u already have JB right..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I mean "future updates" of course!
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
I mean "future updates" of course!
Click to expand...
Click to collapse
Future updates?
Good luck with that!
Please add [SOLVED] to the title of ur topic...
"To err is human, to forgive is divine"
Sent from my SGS II
DareDevil73 said:
I agree with you, but there is a reason why I have to keep my phone with original software.
Is there a way to make it compatible again with Kies updates?
Click to expand...
Click to collapse
Yes, install a Samsung-based custom ROM.
As for a reason why you have to keep your phone with Original software, is it a phone supplied by your employer? If so, then it's Yours to do as you please with, because use of the device is part of your salary package. Other than that, all which is altered by installing a custom ROM can be restored, simply by doing a nandroid backup of the original firmware before installing the new ROM...
immortalneo said:
Please add [SOLVED] to the title of ur topic...
Click to expand...
Click to collapse
How can I edit the title?!
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
How can I edit the title?!
Click to expand...
Click to collapse
When you press edit post, press on "Go
Advanced." There you go.
"To err is human, to forgive is divine"
Sent from my SGS II
Hello.
I have samsung S2 model GP-I9100 my number compilation is IML 74K.UHLPO
version kernel: 3.0.15-I9100UHLPO-CL553479 [email protected] # 3 Android 4.0.3
PDA: I9100UHLPO
PHONE: I9100UHLPG
CSC: I9100PCWLP3 .
I want change my ICS 4.0.3 to 4.0.4.
What kernel for root a need download? Please. thank you.
Any prerooted kernel works.
Sent from my LT18i using xda premium
Read some...and your device will live longer.
Three questions...
1. Why do you want to root it? To upgrade to 4.0.4, u don't need root!
2. Why do you want 4.0.4? Haven't read about the brickbug issue?
3. Why not go for 4.1.2 then? Its the latest update.
"To err is human, to forgive is divine"
Sent from my SGS II
Please reply here instead of by PM.
Rricaurte22 said:
Three questions...
1. Why do you want to root it? To upgrade to 4.0.4, u don't need root!
I don't know. I think need root my SG2. But I mistake.My phone is factory unlocked.
2. Why do you want 4.0.4? Haven't read about the brickbug issue?
No. did not read about this issue, did not know about it. I'm new to this topic
3. Why not go for 4.1.2 then? Its the latest update.
because I read it consumes more battery , not if I'm wrong.
Finally you think I should do with my:
GT-I9100
4.0.3
PDA:I9100UHLPO
PHONE:I9100UHLPG
CSC:I9100PCWLP3
Thanks for your advice and review
Click to expand...
Click to collapse
To install a stock firmware, u don't need to root. U simply need to download the firmware u need and flash it using odin.
Please read about 'eMMC Brickbug' issue on 4.0.4.
Check it with the 'Got Brickbug?' app on XDA.
To be safe on 4.0.4, u need to be on a custom safe kernel.
Battery life depends on a lot of things, most importantly on how u use ur phone, what apps u have etc. JB cannot be blamed for poor battery life.
As for what you can do, you can do anything u like - stay on 4.0.3, update to 4.0.4 or even upgrade to 4.1.2.
"To err is human, to forgive is divine"
Sent from my SGS II
That's why you turn the PM system off (n00bs can't help themselves).
MistahBungle said:
That's why you turn the PM system off (n00bs can't help themselves).
Click to expand...
Click to collapse
True..
Unfortunately turning it off would mean no more PMs from friends and fellow members!
"To err is human, to forgive is divine"
Sent from my SGS II
You can leave it on for friends and/or moderators.
MistahBungle said:
You can leave it on for friends and/or moderators.
Click to expand...
Click to collapse
Thanks for the tip mate! I didn't think there would be an option like that.
"To err is human, to forgive is divine"
Sent from my SGS II
Grettings everyone,
As the title says I want to update my Galaxy S2 i9100 via ODIN which is currently running on Gingerbread 2.3.5 to Jelly bean 4.1.2 officially.
As I'm a kind of person who dont want to mess up my device with rooting or mostly dont care about rooting.
I'm on complete stock Gingerbead 2.3.5 with no root apply.
The problem is that I cant update my GT-I9100 via KIES or via OTA (Over The Air).
Here are the basic which info. which I can provide,
"Model No. (GT-I9100)
Android version (2.3.5)
Baseband version (I9100XXKI4)
Kernel Version (2.6.35.7-I9100JPKj2-CL655700 root @dell143 #2
Build No. GINGERBREAD.JPKJ2
and here is the error which KIES shows.
"Your device's current firmware version is not supported to update firmware via Kies.
* Current firmware version DA:KJ2/ PHONE:KI4/ CSC:KID(XXX)"
Sorry for my bad English and also if I am posting this on a wrong section.
And I also can anyone also tell me the procedure whether to check my phone is locked or not to just make sure everything go perfect during the update process.
Thanks In Advance !
This has already been covered many times mate! Please use search before posting.
Simply download the appropriate firmware for ur region/carrier (if any) from sammobile.com. Extract it and flash it using Odin. Then do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
This has already been covered many times mate! Please use search before posting.
Simply download the appropriate firmware for ur region/carrier (if any) from sammobile.com. Extract it and flash it using Odin. Then do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks mate.
Just 1 more thing is it safe to download any of the jelly bean 4.1.2 of any country? For example India, Pakistan and update it via odin?
Yes it's safe (altough you should back EFS folder up first).
Sent from the little guy
I think, you could find some answer here ---> http://forum.xda-developers.com/showthread.php?t=2156592
midskool said:
Grettings everyone,
As the title says I want to update my Galaxy S2 i9100 via ODIN which is currently running on Gingerbread 2.3.5 to Jelly bean 4.1.2 officially.
As I'm a kind of person who dont want to mess up my device with rooting or mostly dont care about rooting.
I'm on complete stock Gingerbead 2.3.5 with no root apply.
The problem is that I cant update my GT-I9100 via KIES or via OTA (Over The Air).
Here are the basic which info. which I can provide,
"Model No. (GT-I9100)
Android version (2.3.5)
Baseband version (I9100XXKI4)
Kernel Version (2.6.35.7-I9100JPKj2-CL655700 root @dell143 #2
Build No. GINGERBREAD.JPKJ2
and here is the error which KIES shows.
"Your device's current firmware version is not supported to update firmware via Kies.
* Current firmware version DA:KJ2/ PHONE:KI4/ CSC:KID(XXX)"
Sorry for my bad English and also if I am posting this on a wrong section.
And I also can anyone also tell me the procedure whether to check my phone is locked or not to just make sure everything go perfect during the update process.
Thanks In Advance !
Click to expand...
Click to collapse
Have you managed to resolve the problem if so how?
You download from sammobile flash with Odin factory reset in recovery and your done. If you read this thread you would no how to upgrade. On this thread is about efs Bk up too.
MistRee said:
Have you managed to resolve the problem if so how?
Click to expand...
Click to collapse
Yes I have finally updated my i9100 To official 4.1.2... I downloaded the firmware from sammobile and flash it with odin.
1 thing to keep in mind, my lock key was'nt working after the update and the device just not seems to get lock after the update, even when I press and holded the lock button, it reboots.. I had found the solution on this forum.
Facing Same issue of Lockscreen when upgraded to 4.1.2
Hi, Can you please tell me where you find the solution for lockscreen issue?
Even I upgraded my S2 GT-I9100 jellybean 2.3.5 to Android 4.1.2 via ODIN, but lockscreen isn't working.
Please need your help.
Lock screen issue !
amk19 said:
Hi, Can you please tell me where you find the solution for lockscreen issue?
Even I upgraded my S2 GT-I9100 jellybean 2.3.5 to Android 4.1.2 via ODIN, but lockscreen isn't working.
Please need your help.
Click to expand...
Click to collapse
I found the solution here on xda forums. I don't have the correct link of the thread, because I have sold my i9100 about 9-10 months ago.
But you can search here. I hope you will find it.
Try searching "Galaxy S2 i9100 Lock screen issue after jellybean/4.1.2" .
Hi every body
i have updated galaxy s2 gt9100 by odien but it field and now its just keep showing my this (mobile connecting to PC pic) but the good thing when i plug in the capel the odien sees it and can download the flash but still fails any help plzzz...
Look up @Hopper8's Odin troubleshooting guide here on XDA.
"To err is human, to forgive is divine."
Sent from my SGS II
Wesam-syria said:
Hi every body
i have updated galaxy s2 gt9100 by odien but it field and now its just keep showing my this (mobile connecting to PC pic) but the good thing when i plug in the capel the odien sees it and can download the flash but still fails any help plzzz...
Click to expand...
Click to collapse
Are you able to go into recovery mode?
From, the thread title: 'Help with my galaxy s2, its not geting download mode or recovery'.
Reading not a strong point ?
We all have bad days mb. @Jeetu has done a lot for the s2. :thumbup:
Jeetu said:
Are you able to go into recovery mode?
Click to expand...
Click to collapse
yea now im able to open download mode after i flash the ClockworkMod-Recovery_6.0.2.9 ..
but each time i try to flash it, it fails even i try 4.1.2 and 4.0.4 roms
any help with it??
thanks alot
if u can tell me what it means this when i go to download mode it says : custom Binary download yes( 4 counts)
It fails when you flash via Odin? Have u checked the odin troubleshooting guide yet?
Custom binary downloads = custom ROM installs
"To err is human, to forgive is divine."
Sent from my SGS II
Don't flash 4.0.4 pls. Brick bug is not a good thing.
thanks all
i have flash it by odin 1.85 and the rom is 2.3.5.. all ok and done
but how to upgrade it to 4.0.4?
You don't. Forget 4.0.4
If you really want ICS go for 4.0.3
Flash with Odin the same as GB you just flashed. Or root your gb rom and use mobile Odin pro to flash it.
andrewwright said:
Don't flash 4.0.4 pls. Brick bug is not a good thing.
Click to expand...
Click to collapse
thanks alot but what about 4.1.2??
immortalneo said:
It fails when you flash via Odin? Have u checked the odin troubleshooting guide yet?
Custom binary downloads = custom ROM installs
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
i really need some help now
i have just finished the flashing by odin and it works well
but i have did all that to remove to password of the my s2 and now when i put my sim card back it asks for the pass word again
i took the sim card out but still asking for the pass even when i enter the recovey mood to wipe data it asks for the pass word!!!
Reflash . what rom /firmware are you on now?
andrewwright said:
Reflash . what rom /firmware are you on now?
Click to expand...
Click to collapse
thanks
its 2.3.5 now
Wesam-syria said:
thanks
its 2.3.5 now
Click to expand...
Click to collapse
man donno if i sound like stupid with this But i was reading in this page http://forum.xda-developers.com/showthread.php?t=2199288
i downloaded kernal and i have got Official Firmwares 4.0.4, when im trying to flash the kernal it fails and when
i try to flash the bootloader it fails even i really follow all the instructions step by step.
my only way to run my s2 again is to flash it via bootloader by using JB ClockworkMod-Recovery 6.0.2.9
then to flash the frimwares again with 2.3.5 via pda !!
totaly lost.
Am lost too..! That link u provided is meant for the I9100G right?
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Am lost too..! That link u provided is meant for the I9100G right?
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
You're right :thumbup:
Op you're trying to flash something not meant for you're model. In first post you state you have an i9100 ? As @immortalneo has pointed out the thread you have posted is for the i9100g! Stop flashing and start reading mate or you will end up with a phone that don't work. :thumbdown:
true man problem solved
andrewwright said:
You're right :thumbup:
Op you're trying to flash something not meant for you're model. In first post you state you have an i9100 ? As @immortalneo has pointed out the thread you have posted is for the i9100g! Stop flashing and start reading mate or you will end up with a phone that don't work. :thumbdown:
Click to expand...
Click to collapse
true but i have learned ,, i was flashing JB when i should flash IC for it
i have service center u know and i really get lost sometimes
thank u all very much for ur following
im learing alot from u ppl
Wesam-syria said:
true but i have learned ,, i was flashing JB when i should flash IC for it
i have service center u know and i really get lost sometimes
thank u all very much for ur following
im learing alot from u ppl
Click to expand...
Click to collapse
If you download and flash from that thread "i9100g thread" you will break you're phone weather it be ics or jb. Pls just make sure you flash the right ROM for you're model. Were here to help but you need to help yourself too. :thumbup:
thanks brother
andrewwright said:
If you download and flash from that thread "i9100g thread" you will break you're phone weather it be ics or jb. Pls just make sure you flash the right ROM for you're model. Were here to help but you need to help yourself too. :thumbup:
Click to expand...
Click to collapse
well donno but my mobile is S2 I9100
i have downloaded 4.1.2 from tsar3000 and flash it as well.. and mobile returned to hes owner
but still i didnt get the idea what the problem with that thread? i mean its talking about same model right?
i have downloaded the kernal from it but the mobile didnt take it... im reading the thread again i hope i'll get ur point.
ty