Hi everybody,
I'm using XT910 with Bootmenu. When flashing a rom on 2nd system, I forgot to notice the warning "hijack version is mismatch. Bootmenu will run in next boot" ==> bootmenu really did not run & also not boot to any rom
Is anyone know a way to recover bootmenu & boot to the rom on 1st system?
raidernet said:
Hi everybody,
I'm using XT910 with Bootmenu. When flashing a rom on 2nd system, I forgot to notice the warning "hijack version is mismatch. Bootmenu will run in next boot" ==> bootmenu really did not run & also not boot to any rom
Is anyone know a way to recover bootmenu & boot to the rom on 1st system?
Click to expand...
Click to collapse
hhmm, seems you cant boot to 1st rom slot, reflash the fastboot via rsd lite and flash bootmenu, make sure you download the recovery from playstore by whirleyes
TheMrcool212 said:
hhmm, seems you cant boot to 1st rom slot, reflash the fastboot via rsd lite and flash bootmenu, make sure you download the recovery from playstore by whirleyes
Click to expand...
Click to collapse
Thanks. So the only solution is reflashing the fastboot
Related
Hi, everyone!
[What is this rom?]
This Rom is XT910's orginal stock rom.
XT910S is Korea SKTelecom RAZR.(build.id=6.5.1-8_SDS-29_LE-58)
XT910K is Korea KoreaTelecom RAZR.(build.id=6.5.1-8_SDK-29_LE-58)
It's recovery(CWM) update(flash) rom.
[Who made this rom?]
Were made directly to me.
[What is the difference?]
This rom is almost XT910S and XT910K original stock rom.
XT910S: Only difference is "change statusbar's battery 10%", "root", "Bootstrap recovery and CWM on Boot".
XT910K: Only difference is "root", "Bootstrap recovery and CWM on Boot".
In summary, this rom is restore of orignal stock rom.
I hope someone can help those in need.
[Warning]
Don't flash if it is not XT910S(Korea SKTelecom RAZR) and XT910K(Korea KoreaTelecom RAZR)
[install]
1. First, CWM Recovery should already be installed.
2. Rom file download and copy at SDcard.(/sdcard-ext)
3. Recovery boot.
4. in recovery menu: "install zip from sdcard" -> "choose zip from sdcard" -> select file.
5. After completed update, wipe data/factory reset. (Required)
6. reboot. (is all finished)
[Download]
XT910S: http://min.us/mY7fuTmtj
XT910K: http://min.us/mNWVOtoXX
Good luck with Razr!
Thanks! This helps alot.
Hi JY, the links don't work anymore.
Do you have new links. ..for the xt910k.
Thanks
XT910s Boot Failure
Hi,
I have here an xt910s from Korea but I accidentally brick it by flashing incompatible firmware. I cannot boot to the recovery. Any Solution for this?
mac20dnangel said:
Hi,
I have here an xt910s from Korea but I accidentally brick it by flashing incompatible firmware. I cannot boot to the recovery. Any Solution for this?
Click to expand...
Click to collapse
taking it to a store , erease cid like me
can someone mirror the link.pls.i can not download from this host
// srrry for my bad English
fantasylovevn said:
can someone mirror the link.pls.i can not download from this host
// srrry for my bad English
Click to expand...
Click to collapse
This CWM from J.Y.Daddy is Android GB 2.3.6
Do you still need it? I might have a copy somewhere in my PC's HDD. Just let me know...
But IMHO (I am using a XT910S with Vodafone's android 4.1.2 for XT910), you should erase CID partition and use RSD Lite to flash any ICS XT910's SBF files, then install Boot MenuManager 0.3.4 to bypass the CID error at boot.
Good luck!
reachking said:
This CWM from J.Y.Daddy is Android GB 2.3.6
Do you still need it? I might have a copy somewhere in my PC's HDD. Just let me know...
But IMHO (I am using a XT910S with Vodafone's android 4.1.2 for XT910), you should erase CID partition and use RSD Lite to flash any ICS XT910's SBF files, then install Boot MenuManager 0.3.4 to bypass the CID error at boot.
Good luck!
Click to expand...
Click to collapse
hix.mine is same 2 u.i request This CWM from J.Y.Daddy because i hope that will "factory reset" so i no longer need to install Boot MenuManager 0.3.4 to bypass the CID error at boot.does CWM from J.Y.Daddy have ability to do this?????
@J.Y.Daddy,
Do you have stock ICS fastboot files for XT910S ?
Thank you.
I cannot download the file of XT910S, it always redirects me to minus.com whenever I click the download button. Please help!
reachking said:
This CWM from J.Y.Daddy is Android GB 2.3.6
Do you still need it? I might have a copy somewhere in my PC's HDD. Just let me know...
But IMHO (I am using a XT910S with Vodafone's android 4.1.2 for XT910), you should erase CID partition and use RSD Lite to flash any ICS XT910's SBF files, then install Boot MenuManager 0.3.4 to bypass the CID error at boot.
Good luck!
Click to expand...
Click to collapse
Hi! Do you still have your XT190S firmware for ICS or even JB? Because I would like to flash one of these so I can install SS or BMM to flash CM11 on top of it PLEASE
Hi there,
i have XT910K and its bricked now as i tried to flash CM 12.1 and it went in to BootLoop....
i tried flashing other official EU/EMEA firmwares but nothing works....
Can i get the XT910K firmware file please?
Download link Expired
Hey Can you please share new link for Motorola Razr XT910K rom. Above link is expired and i need rom badly. Thanks in Advance
Hi everyone!
I am trying to flash cm9 with CWM v5.0.2.8, but the phone gets stuck while booting. Before flashing I wipe everything (dalvik cache, cache, data, battery stats), and format the system, and still I am getting stuck while booting again and again. I see a screen with a red circle with M inside it, the text under it is "dual core technology", and the text in the top - "unlocked". I can wait and wait but nothing happens. the only choice is to restore to the stock rom. My device is rooted and unlocked.
I Tried to use the previous version of CWM, but after I flash it with rom manager the recovery gets unreadable. I go into the recovery mode and see unreadable lines of text.
Please help me! I'm tired of unplugging and plugging the battery again and again..
Thank you!
Forgot to say:
I tried to flash the file "beta-0.2.0-cm-9.0.0-RC0-Sunfire-KANG-signed.zip".
Should I have flashed any special kernel?
yairku said:
Hi everyone!
I am trying to flash cm9 with CWM v5.0.2.8,!
Click to expand...
Click to collapse
Bold part is the problem. For some reason the newest version of CWM results in a stuck boot with CM9 for the photon. You need 5.0.2.7 (or below I'd assume).
Go here and grab the CWM that is posted and flash that.
Thanks. How do I flash a recovery? RSD lite is good?
Edit: I tried to use bootstrap, but it doesn't boot into recovery but into android. So how do I flash the "old" version of CWM?
yairku said:
Thanks. How do I flash a recovery? RSD lite is good?
Edit: I tried to use bootstrap, but it doesn't boot into recovery but into android. So how do I flash the "old" version of CWM?
Click to expand...
Click to collapse
Flash it through the version you have 5.0.2.8
Sent from my MB855 using Tapatalk
bricky23 said:
Flash it through the version you have 5.0.2.8
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
OR use the moto-fastboot method which is simple too.
Thanks for the help! I managed to flash the recovery, and then I successfully flashed the cm9! Thank you!
yairku said:
Thanks. How do I flash a recovery? RSD lite is good?
Edit: I tried to use bootstrap, but it doesn't boot into recovery but into android. So how do I flash the "old" version of CWM?
Click to expand...
Click to collapse
I'll be honest this is why I don't like rom manager
Good practice should be to do everything as "manually" as possible first, then consider using apps like rom manager to speed up these tasks.
Hi all.
I bricked my gsm (italian) razr.
I would like to install last miui, so I installed cwm recovery.
Everything ok, i choose zip from sdcard and then bootloop with miui logo.
So I have to ask: how can i choose recovery mode (to select the restore mode)?
Of course i had a backup first, but how can now restore it?
Now razr is a brick.
Please help me.
Tx in advance.
A razr-noob, ex hd2-expert.
are you using safestrap or bootstrap recovery? a bootloop is not bricked. restart your phone and see if recovery pulls up. if not you will have to enter fastboot mode and flash back to stock, re-root and start over.
iperv said:
Hi all.
I bricked my gsm (italian) razr.
I would like to install last miui, so I installed cwm recovery.
Everything ok, i choose zip from sdcard and then bootloop with miui logo.
So I have to ask: how can i choose recovery mode (to select the restore mode)?
Of course i had a backup first, but how can now restore it?
Now razr is a brick.
Please help me.
Tx in advance.
A razr-noob, ex hd2-expert.
Click to expand...
Click to collapse
Ciao!
Flash a stock rom and don't use CWM which is not working.
1. First, flash a stock system with RSD lite (this one)
2. Then you'll be able to charge your razr and update your system to something newer.
Cheers
Tank's a lot, guys.
I'm offline all day long 'cause my internet went from razr...
Thanks for your replies, i'll now study what i have to do.
pedrotorresfilho said:
Ciao!
Flash a stock rom and don't use CWM which is not working.
1. First, flash a stock system with RSD lite (this one)
2. Then you'll be able to charge your razr and update your system to something newer.
Cheers
Click to expand...
Click to collapse
Ok.
Tx to your link, i learn some tips for motorola, expecially the one that i can to wipe data and cache by stock recovery.
so, i wiped data and cache and reboot and magically miui started in a few seconds!
So:
1) Thank you so much for your links;
2) CWM it's ok now, ihave it on my phone.
I also downloaded rsdlite...
Hi all.
Just a bit not so much noob of razr.
iperv said:
Ok.
Tx to your link, i learn some tips for motorola, expecially the one that i can to wipe data and cache by stock recovery.
so, i wiped data and cache and reboot and magically miui started in a few seconds!
So:
1) Thank you so much for your links;
2) CWM it's ok now, ihave it on my phone.
I also downloaded rsdlite...
Hi all.
Just a bit not so much noob of razr.
Click to expand...
Click to collapse
Bravissimo. You just graduaded ex noob
Cheers
Sent from my XT910 using xda premium
Hello
I need immediate help!
Here is what happened. i have motorola razr maxx xt910 MERetail with stock rom. i install BMM recovery manager and then installed CM 10.1 on second slot/system. then i found out SS recovery manager is better so when i was in second rom, i installed BMM apk, hit uninstall and then install SS apk -> install SS recovery. after reboot, nothing boots up!
i only see the motorola logo and then it goes blank.
i tried to flash (through default motorola recovery menu) cm 10.1 and also a stock jellybean rom created by Hashcode (http://goo.im/devs/Hashcode/umts_spyder/aosp) but both errors on package signature verification. what can i do?
omid8bimo said:
Hello
I need immediate help!
Here is what happened. i have motorola razr maxx xt910 MERetail with stock rom. i install BMM recovery manager and then installed CM 10.1 on second slot/system. then i found out SS recovery manager is better so when i was in second rom, i installed BMM apk, hit uninstall and then install SS apk -> install SS recovery. after reboot, nothing boots up!
i only see the motorola logo and then it goes blank.
i tried to flash (through default motorola recovery menu) cm 10.1 and also a stock jellybean rom created by Hashcode (http://goo.im/devs/Hashcode/umts_spyder/aosp) but both errors on package signature verification. what can i do?
Click to expand...
Click to collapse
You were on JB stock or ICS stock?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB fastboot firmwares,just flash any EU firmware with RSD Lite.
welder73 said:
You were on JB stock or ICS stock?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB fastboot firmwares,just flash any EU firmware with RSD Lite.
Click to expand...
Click to collapse
by default, it had ICS stock (4.0.4).
any ROM will do or it must be ICS and must be MERetail? EU firmware will work as well?
omid8bimo said:
by default, it had ICS stock (4.0.4).
any ROM will do or it must be ICS and must be MERetail? EU firmware will work as well?
Click to expand...
Click to collapse
You were on ICS and with this you will upgrade to JB.Go to the last page of that thread,a guy with the same version as yours succesfully flashed EU version.
welder73 said:
You were on ICS and with this you will upgrade to JB.Go to the last page of that thread,a guy with the same version as yours succesfully flashed EU version.
Click to expand...
Click to collapse
thanks for the link; im reading it now.
so its possible to direcly flash JB to my device when i have no rom/boot/recovery at this moment?
also, one more related question; is it possible to toggle off the package/signature verification so i can install cm 10.1 from razr factory bootloader?
Ok problem solved.
for those who might have this problem; I flashed JB Retail British (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip) via RSD Lite 6 on windows into my device and everything went smoothly.
just for learning purpose, can someone tell me what are these for?
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
omid8bimo said:
Ok problem solved.
for those who might have this problem; I flashed JB Retail British (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip) via RSD Lite 6 on windows into my device and everything went smoothly.
Click to expand...
Click to collapse
Glad that everything is ok.
Sent from my Razr XT910
Fastboot cable
omid8bimo said:
hello
i need immediate help!
Here is what happened. I have motorola razr maxx xt910 meretail with stock rom. I install bmm recovery manager and then installed cm 10.1 on second slot/system. Then i found out ss recovery manager is better so when i was in second rom, i installed bmm apk, hit uninstall and then install ss apk -> install ss recovery. After reboot, nothing boots up!
I only see the motorola logo and then it goes blank.
I tried to flash (through default motorola recovery menu) cm 10.1 and also a stock jellybean rom created by hashcode (http://goo.im/devs/hashcode/umts_spyder/aosp) but both errors on package signature verification. What can i do?
Click to expand...
Click to collapse
use a fastboot cable, it is helpful
omid8bimo said:
Ok problem solved.
for those who might have this problem; I flashed JB Retail British (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip) via RSD Lite 6 on windows into my device and everything went smoothly.
Click to expand...
Click to collapse
I did the same last night, using RSD Lite 6.1.5 and it said FAILED. Also tried to flash boot, recovery and system img files via Fastboot, also failed. I can enter Fastboot and stock recovery and that's about it. Also tried to flash Nandroid backup via custom recovery but it said "signature verification problem, installation aborted".
I'm out if ideas what to do. If someone can help, please do.
Lincoln357 said:
I did the same last night, using RSD Lite 6.1.5 and it said FAILED. Also tried to flash boot, recovery and system img files via Fastboot, also failed. I can enter Fastboot and stock recovery and that's about it. Also tried to flash Nandroid backup via custom recovery but it said "signature verification problem, installation aborted".
I'm out if ideas what to do. If someone can help, please do.
Click to expand...
Click to collapse
I just did the RSD format and i worked. make sure you follow the steps on getting into the fastboot recovery menu and it should say "ready" until you can force flash via RSD and appropriate rom file.
omid8bimo said:
I just did the RSD format and i worked. make sure you follow the steps on getting into the fastboot recovery menu and it should say "ready" until you can force flash via RSD and appropriate rom file.
Click to expand...
Click to collapse
Please brother, can you post your process step-by-step and I will try your way, I have all the files needed but it just won't work. It is visible in Fastboot cause it shows the device's serial number, but in RSD Lite it says N/A under the device description. Also, fastboot says my CID is 5, don't know is it related to this issue. Flashing from stock recovery comes up with "signature verification failed", whatever I tried: ICS, JB, ICS backup, update...
Also, Fastboot menu says (first line) flash failure. This is my first Motorola phone and I really don't know what to do anymore, I'm pretty desperate. Is it possible that no one can help in this case? As for the HTC HD2 with Android ported, I shared my knowledge and experience which helped many users fix their issues. As for the Razr, I've been reading for days and nights since it was bricked and couldn't find the solution yet.
Sent from my HTC HD2 using Tapatalk 2
Lincoln357 said:
Please brother, can you post your process step-by-step and I will try your way, I have all the files needed but it just won't work. It is visible in Fastboot cause it shows the device's serial number, but in RSD Lite it says N/A under the device description. Also, fastboot says my CID is 5, don't know is it related to this issue. Flashing from stock recovery comes up with "signature verification failed", whatever I tried: ICS, JB, ICS backup, update...
Also, Fastboot menu says (first line) flash failure. This is my first Motorola phone and I really don't know what to do anymore, I'm pretty desperate. Is it possible that no one can help in this case? As for the HTC HD2 with Android ported, I shared my knowledge and experience which helped many users fix their issues. As for the Razr, I've been reading for days and nights since it was bricked and couldn't find the solution yet.
Sent from my HTC HD2 using Tapatalk 2
Click to expand...
Click to collapse
follow this dude -> http://www.droidviews.com/restore-your-motorola-droid-razr-from-bootloop-using-fastboot-files/
Its what i did to restore my bricked razr to a working state.
U Hello xda,
I've decided to root my xt910 and install cm rom. Root went smoothly however i had problems with the custom recovery. At first i tried safestarps but i couldn't flash the zip it keep aborting the installation :
Set_perm some changes failed. I've tried to install cwm 5.0.8.0 from here http://forum.xda-developers.com/showthread.php?t=1751826 but i got status 7 trying to flash the rom after factory reset and wiping cache. Couldn't find in updater scripts the assert part that i need to delete to make status 7 disappear because of compatibility. I tried to wipe dalvik cache and formatting system which afterwards i manage to flash the rom. At the end i received message "if rom wasnt flashed on rom slot - 1 phone will not boot!!! This will be fixed soon. "
When i tried reboot system nothing boots. And when i try to boot to recovery i get to stock recovery although i had installed cwm.
Now i end of with a bricked phone. My questions are:
1. How can i unbrick?
2. I backed up nandroid with cwm but i cant acces cwm only stock recovery? Why is that and how can i get to cwm?
3. Why my phone is not booting? I did not flash with safestarps so it wasn't flashed on rom slot-1
4. I only have acces to stock rom, ive download a firmware update Jb 4.1.2 can i flash it with stock recovery to solved my brick?
Am i still rooted? Because i read i need to unroot before updating. How can i unroot if i only have stock recovery?
Please help!!! I can't afford lossing this phone!
Anyone have an idea what can i do? Not sure if i should use rsd to flash fastboot files, im not 100% sure what my firmware version is
torecdude said:
Anyone have an idea what can i do? Not sure if i should use rsd to flash fastboot files, im not 100% sure what my firmware version is
Click to expand...
Click to collapse
Yes,you should use Rsd.
Where you from?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,pick one for your country.
Sent from my Razr XT910
welder73 said:
Yes,you should use Rsd.
Where you from?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,pick one for your country.
Sent from my Razr XT910
Click to expand...
Click to collapse
thanks, rsd solved my problem.
torecdude said:
thanks, rsd solved my problem.
Click to expand...
Click to collapse
I'm glad that to hear that.
Sent from my Razr XT910