Related
Hi,
I am trying to revert to Stock ROM on GT-I9100G. Read all the posts I could find. And still no success.
Everytime I flash a rom in Odin it fails.
Followed this guide: http://forum.xda-developers.com/showthread.php?t=1457458
Managed to flash the kernel (KI3) but the rom fails..
Can enter download mode but not to recovery mode
Any advice?
I9100 ?
Flash siyah v5 or v6.
Flash lsj (phone, code & CSC only).
Sent from the little guy
archmisha said:
Hi,
I am trying to revert to Stock ROM. Read all the posts I could find. And still no success.
Everytime I flash a rom in Odin it fails.
Followed this guide: http://forum.xda-developers.com/showthread.php?t=1457458
Managed to flash the kernel (KI3) but the rom fails..
Can enter download mode but not to recovery mode
Any advice?
Click to expand...
Click to collapse
Please tell us which rom u had when it bricked..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Please tell us which rom u had when it bricked..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I dont rememeber ;(
gastonw said:
I9100 ?
Flash siyah v5 or v6.
Flash lsj (phone, code & CSC only).
Sent from the little guy
Click to expand...
Click to collapse
Installed siyah but cant enter recovery to flash lsj
Hi,
Since you have GT-I9100G, i would recommend posting this in the Q&A thread in "GT-I9100G Android Development" section (It's in the Samsung Galaxy S II forum just a few steps down from this Q&A section)
Tell us if you fixed it by going there
Kaldsud said:
Hi,
Since you have GT-I9100G, i would recommend posting this in the Q&A thread in "GT-I9100G Android Development" section (It's in the Samsung Galaxy S II forum just a few steps down from this Q&A section)
Tell us if you fixed it by going there
Click to expand...
Click to collapse
There is no troubleshooting section for GT-I9100G, only android development
Whether you edited the OP or I didn't notice the G.
Flash a stock ROM via odin, don't flash any custom kernel.
Sent from the little guy
gastonw said:
Whether you edited the OP or I didn't notice the G.
Flash a stock ROM via odin, don't flash any custom kernel.
Sent from the little guy
Click to expand...
Click to collapse
Thanks for the reply,
Does it matter which stock rom? i mean there are many countries and different versions in sammobile.
Also I already tried some kernels, is there a a way to wipe them away?
Thanks
Yes, it matters.
I9100 & I9100G don't share the same hardware.
Almost everything meant for I9100 won't work on a I9100G neither the other way around.
Flash this.
archmisha said:
Thanks for the reply,
Does it matter which stock rom? i mean there are many countries and different versions in sammobile.
Also I already tried some kernels, is there a a way to wipe them away?
Thanks
Click to expand...
Click to collapse
OK! finally flashed this one: I9100GDZKL3_I9100GDZKL3_I9100GOLCKL3_HOME.tar.md5 and managed to boot
Now it is 2.3.6 how can i upgrade it to android 4? I am afraid i will flash anything else it wont boot again
Hello, first off i have read through loads of pages, been trying to figure things out for days, but the vast amount of info gets a little confusing, and just looking for a little more help, I have s2 i9100P XXLPH, running stock ics 4.0.3, i couldn't find a cf anywhere for it as the one i tried didn't work, it just stayed at the start up screen, so i downloaded the stock and flashed through Odin to bring it back to normal. I then managed to root it using ExynosAbuse, i then installed busybox. (not sure if i got it from google market or on this site) anyway I want to start trying a few roms but want to know the best way to go about this for my phone, Can i just download a SiyahKernel if so, should i download the latest SiyahKernel S2-v6.0beta4, also does this Kernel install cwm for me or do i need to download that and install it separately as i will need to make a nandroid backup. Sorry i know all this info is probably on the site but as i said it just gets confusing with reading so much stuff, i'm not new to custom roms as i put custom roms on my San Francisco and Huawei Ascend G300. Just need a little kick in the right direction
hi, i tried reviewing a bit about your device. i am using SGS 2 I9100.
http://www.droidevelopers.com/f364/11689-galaxy-s2-variants-i9100-i9100g-i9100p-i9100t-i9100m.html
you can click that link atleast to check the difference.... have you tried the DORIMANX kernel for ICS support.... have you read about the brick bug of SGS2, better to be safe than sorry man. atleast try to find the eMMC check apk and install it to your phone before flashing a kernel. though kernels for S2 now have the eMMC_cap_erase=0. atleast try to check if you have the super brick bug on your current rom. mine just had one before you know.... it was resurrected by JTAGG deadboot option.
http://dorimanx.shine.sk/ - here is the list of the kernels of dorimanx... find the one that has ICS support....
then if the kernel worked. flash the rom you want...
note: if you chose to flash the CM10.1, dont forget to download the dorimanx kernel 9.xx, after flashing the rom JB base, flash a JB kernel.
Re: Whats my next step
feckineejit said:
Can i just download a SiyahKernel if so, should i download the latest SiyahKernel S2-v6.0beta4, also does this Kernel install cwm for me or do i need to download that and install it separately as i will need to make a nandroid backup.
Click to expand...
Click to collapse
U can flash siyah v5.0.1, and CWM recovery will be installed too. Or u can flash Dorimanx as it also comes with CWM. It doesn't matter which, because after flashing a custom ROM, the kernel and recovery is replaced by those included in that custom ROM.
U can make a nandroid backup after flashing siyah or dori, and before flashing a custom ROM.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 06:01 AM ---------- Previous post was at 05:59 AM ----------
And please note that only stock 4.0.4 firmwares with stock kernel are prone to the eMMC Brickbug. I u do have 4.0.4, you can flash a custom kernel like Siyah, and ur safe.
"To err is human, to forgive is divine"
Sent from my SGS II
Re: Whats my next step
You can flash any I9100 ROM/kernel, you might lose NFC capability by doing it.
You've got a lot of Custom ROMs Threads in the Original Android Development Forum. You can check other users perceptions on the ROM in cuestion.
Check out the nuke scripts threads, those scripts may come in handy for clean flash as it wipes previous Custom ROMs leftovers.
It's always good to have Mobile Odin installed, enables you to flash stock ROMs very easily and in a safe manner.
You can get confused if you read a bunch of thread about a bunch of subjects.
I suggest you go from specifics topics to specifics issues related to that subject.
Q&A is a great place to learn about any issue you can get.
Sent from the little guy
Thanks guys got siyah v5.0.1installed now, bought a usb jig and removed the triangle after installing the old bootloader, done a nandroid backup, still on stock rom, will have to have a look around on the roms page and try pick a good one to try out
Re: Whats my next step
feckineejit said:
Thanks guys got siyah v5.0.1installed now, bought a usb jig and removed the triangle after installing the old bootloader, done a nandroid backup, still on stock rom, will have to have a look around on the roms page and try pick a good one to try out
Click to expand...
Click to collapse
Ur always welcome! :thumbup:
Please add [SOLVED] to the title of ur post. Happy flashing!
"To err is human, to forgive is divine"
Sent from my SGS II
Hi guys,
At the beginning of this year, I flashed the phone from vr 3.0 to ics:-
Rom: ICS
And' ver: 4.1.2
Baseband: i9100XXLS6
Kernel: 3.0.31-462349 [email protected] #3 SMP PREEMPT Tue Nov 6 02:42:23 KST 2012
Build No: JSO54K.I9100XXLSJ
It ran okay, although now and again the phone would freeze for a couple of seconds, but then continue working fine. But over the last month it has developed the following problems:-
1. Freezes and reboots on a regular basis
2. On many occasions after reboot, battery goes from a good 90% to suddenly 10-20%
3. Even with a different battery from a friend's s2, the phone still does freeze/lock.
I have ordered a brand new battery (2000mAh) from orange, but whilst i'm waiting for that to arrive, I would like to reflash to whatever you can recommend. I want to preferably go back to the latest orange brand fw and see if that resolves the problem.
Could you please clarify the following for me?:-
1. How do i fully backup everything (excluding rom!!) and how do i restore it?
2. Is the latest Orange FW Version 4.0.3 which was released on jan 2013?
3. Once reflashed, how do i root it too?
Thanks
wowandroid said:
1. How do i fully backup everything (excluding rom!!) and how do i restore it?
2. Is the latest Orange FW Version 4.0.3 which was released on jan 2013?
3. Once reflashed, how do i root it too?
Thanks
Click to expand...
Click to collapse
1. U can use Titanium Backup to fully backup all ur apps and their data. As for ur personal info (like contacts, messages), u can find many apps in the Playstore (like Super Backup).
2. Check sammobile.com to see.
3. There are many guides here on how to root ur device. Different firmwares have different methods. So I can't really say which unless I know what ur gonna flash.
"To err is human, to forgive is divine"
Sent from my SGS II
Thanks very much immortalneo.
I checked the sammobile.com site and found the I9100PBVLPE_I9100PORALPE_ORA to be the latest firmware for my orange uk mobile, which i believe is ICS 4.0.3 fw. Now how would i root this fw?
wowandroid said:
Thanks very much immortalneo.
I checked the sammobile.com site and found the I9100PBVLPE_I9100PORALPE_ORA to be the latest firmware for my orange uk mobile, which i believe is ICS 4.0.3 fw. Now how would i root this fw?
Click to expand...
Click to collapse
Yes, it is the latest firmware. You can root it easily using ExynosAbuse (search again).
"To err is human, to forgive is divine"
Sent from my SGS II
thats absolutely brilliant! thanks!
btw, i can't use titanium backup as the phone has not been rooted, so i'm using super backup to backup all apps, sms, contacts etc.
i will let you know if i have any issue
hi again mate,
i managed to reflash the original 4.0.3 fw onto the s2 and although this seems slower than previous ics, i guess i'll have to try it out and see how it goes.
i've ran into a problem with ExynosAbuse though. When i click on "root device", it says "FAILURE: Could not root device". Any ideas why? what fix should i use?
Also what is a fast firmware that doesn't have too much bloatware and allows a good battery life?
Hi again,
First of all, I would like to say thanks for all the help and advice. I really appreciate it.
After flashing the orange stock rom, I found that the phone was still freezing, rebooting and battery losing it's charge. I have now got a new battery for it and that has resolved these issues which i'm very happy about.
Unfortunately, the phone is still jerky and even my new budget ZTE Blade III seems to be more faster/smoother than the S2!!
I have tried numerous roms and they all seem to be jerky.
I want to know the following please:-
1. Could it be a ram/cpu issue?
2. What rom would you say puts the least pressure on ram/cpu? Can you recommend one?
3. How do i put on the recommended rom? Odin or a different method?
Thanks!
BUMP!
1) Maybe.
2) No. Rom recommendations/threads are forbidden here:-
A) Because there's hundreds of them on here already.
B) Your experience of a rom or kernel will not be the same as mine due to different phone setup & use.
B) Given how easy it is to flash roms & kernels/backup/restore with CWM once you've rooted your phone, there's no excuse for you to not try out a bunch of roms until you find one that works well for you. If you try a rom & you find you don't like it, you restore a backup of your previous setup in 5 minutes & either try another rom or stick to your previous setup.
3) The flashing instructions for a given rom will be on the first page of the thread devoted to that rom. Most custom roms are flashed via CWRecovery, a few have Odin flashable versions. Most stock roms on the other hand are Odin flashable, tho people here have also made CWM flashable versions of some stock roms.
The advice is to read read read read read read. Not doing so is the number 1 cause of busted phones on here.
Thanks very much MistahBungle.
You see, I've already tried loads of roms and I get the same problem, i.e. the phone apps work flawlessly, but there is a lag when i scroll through the home screens. I thought it might be the bloated orange stock rom, so tried villianrom, neatrom and many others. I tried to also clear the ram, just incase it's a lack of memory issue, but had no luck.
Can you recommend anything else?
*coughs*
Didn't read 2) eh ? No. I won't recommend you a rom. Because it may not solve your problems & you won't have the same experience as me.
Edit - Oh. Right. 'Other' recommendations. Well, the lag you're talking about (in my experience) seems to often be kernel related. Perhaps try a bunch of kernels rather than roms ? 'Clearing' ram will often make system lag worse. Android does a pretty good job at memory management, so there's no need to 'clear ram'. You may notice that Android often doesn't leave a lot of 'free' ram, this is by design. It tends to reserve free ram for 'itself'/system processes in case it needs it at short notice, this is somewhat normal.
sorry mate, i think you've misread what i'm asking...i'm not asking for a rom recommendation, but i want to know if there is anything i could do to improve the scroll lag/jerk effect?
Yep - read my edit.
Good idea, thanks very much. Although i assumed that a stock rom would have a good kernel.
Is it hard to install a kernel on an unrooted phone? FYI, I plan to install Neatrom (apps removed) it comes with Kernel: XWLSS-v5.00.4-PhilZ. Don't know if this is any good???
Some kernels have Odin flashable versions, some not. Personally speaking, I'd prefer rooted & flash via CWRecovery because its easy.
Can't speak for that particular kernel, never tried it. Never tried the rom either.
Cheers buddy.
Hopefully once i flashed Neatrom using Odin, then i should be able to root it.
wowandroid said:
Cheers buddy.
Hopefully once i flashed Neatrom using Odin, then i should be able to root it.
Click to expand...
Click to collapse
FYI, u don't need to root NeatRom, as it is already rooted.
And Philz kernel is the stock kernel itself. If you want to try a different kernel than stock, try Siyah or Dorimanx.
"To err is human, to forgive is divine"
Sent from my SGS II
sounds way too complicated to change the kernel as i've never done it.
if i install neatrom and assuming it's still giving me problems, how do i change it's kernel to the ones you've mentioned?
wowandroid said:
sounds way too complicated to change the kernel as i've never done it.
if i install neatrom and assuming it's still giving me problems, how do i change it's kernel to the ones you've mentioned?
Click to expand...
Click to collapse
No no.. its not at all complicated.. just make sure u don't flash the wrong kernel, that's all (read instructions carefully)
If ur on NeatRom (which has a custom CWM recovery), its very easy:
1. Download the correct custom kernel (in zip format) from XDA.
2. Copy it to ur phone.
3. Boot into CWM recovery.
4. Flash the kernel zip (just like flashing a custom rom).
5. Wipe cache, dalvik cache and fix permissions in recovery.
6. Reboot.
7. Give the new kernel a few days to settle.
"To err is human, to forgive is divine"
Sent from my SGS II
Thanks so much immortalneo. I know some of us noobs will bang on about the same issues, again and again, but it's just a jungle out there with the choice of roms etc. Also i want is the least bloated rom and smooth screen etc.
Now i know i've may have already asked this earlier, but immortalneo, would you know which kernel is known to have fast speed?
Hello!
I want to do a root for my GALAXY S2 I9100T device so I can install the rom SUPERNEXUS 2.0
You can request a guide or a suitable way to fit my version?
i got Android version 4.0.4
i want just to get the ROM SUPERNEXUS 2.0 so my galaxy will look like nexus i am new in this android things its a new phone
btw i have no sim card, will it works ?
Baseband version:
I9100TJILPD
Core version:
3.0.15-1087786
root @ BUILDSERVER-241 # 3
SMP PREEMPT Wed Sep 5 12:00:52 EEST 2012
Build version number:
IMM76D.JILPD
What can adjust these data after cone I can also install the ROM SUPERNEXUS 2.0
Please help I really do not understand these things this new phone I bought it last week and I want to look like NEXUS 4.2.2))
So if possible the safest and easiest way would work please tell me
Thanks.
The I9100T is almost similar to the I9100 in terms of hardware, and so u can use a rooting method meant for the I9100.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
The I9100T is almost similar to the I9100 in terms of hardware, and so u can use a rooting method meant for the I9100.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
oh thanks then..
mm whats the best and easy way to root ?
my plan is to install the SUPERNEXUS 2.0 ROM all i know is that i have to root the device
so whats the best to do it so the rom will work ?
and i have no sd card it will be ok ? because in rom install it say need copy files to sd card?
theres way do it without sd card ?
thanks
PSYCO1g said:
oh thanks then..
mm whats the best and easy way to root ?
my plan is to install the SUPERNEXUS 2.0 ROM all i know is that i have to root the device
so whats the best to do it so the rom will work ?
and i have no sd card it will be ok ? because in rom install it say need copy files to sd card?
theres way do it without sd card ?
thanks
Click to expand...
Click to collapse
Use Siyah kernel to root.
SD card stands for your internal SD memory, not the external SD card. Just copy it to ur phone, that's all.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Use Siyah kernel to root.
SD card stands for your internal SD memory, not the external SD card. Just copy it to ur phone, that's all.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Siyah kernel ?
are u sure ?
i searched for it but didnt knew what to do rly
is it match for 4.0.4 android ?
and will if works for the SUPERNEXUS 2.0 ROM ?
can i have a good root tutorial ?
sry im rly noob xD
PSYCO1g said:
Siyah kernel ?
are u sure ?
i searched for it but didnt knew what to do rly
is it match for 4.0.4 android ?
and will if works for the SUPERNEXUS 2.0 ROM ?
can i have a good root tutorial ?
sry im rly noob xD
Click to expand...
Click to collapse
Saying ur a noob is no excuse for not searching mate. All it takes is some good old reading and a little common sense.
Siyah kernel is actually compatible with all versions of android, including 4.0.4. But you must be careful to choose the correct version of Siyah that matches ur firmware.
It doesn't matter what kernel u have, because after flashing it will be replaced by the kernel included in the SuperNexus rom.
For a good tutorial, u can use search or check out the stickies in the Q & A section.
Feel free to ask any doubts u may have.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Saying ur a noob is no excuse for not searching mate. All it takes is some good old reading and a little common sense.
Siyah kernel is actually compatible with all versions of android, including 4.0.4. But you must be careful to choose the correct version of Siyah that matches ur firmware.
It doesn't matter what kernel u have, because after flashing it will be replaced by the kernel included in the SuperNexus rom.
For a good tutorial, u can use search or check out the stickies in the Q & A section.
Feel free to ask any doubts u may have.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
thanks for the answer, not tring to excuse it just i searched but i dont know what is good so i now will search in q / a and ill tell u what i understood thanks.
PSYCO1g said:
thanks for the answer, not tring to excuse it just i searched but i dont know what is good so i now will search in q / a and ill tell u what i understood thanks.
edit:
mmm so what match for my firmwere ? is firmwere is about the supernexus one or just random ?
dont rly get it sorry again
SiyahKernel S2-v5.0.1 is this one is good ?
http://www.gokhanmoral.com/?cat=5
what do i need to do to have my device to have the SUPERNEXUS 2.0 working with a good kernel that will work good with the rom
what rom is good for it and how i install it ?
Click to expand...
Click to collapse
Replying to ur PM:
When u are going to root, u should look at the firmware u have now, and choose the correct kernel. Don't look at the rom that u are planning to flash.
Siyah v5.0.1 is the latest kernel for ICS, and hence is a good choice. You can use it to root now.
To get SuperNexus (or any other custom rom), u need a working CWM recovery to flash the rom.
Flashing Siyah kernel via odin will install this CWM recovery. You only need to follow the instructions given in the rom's thread after that to install.
There was no good rom,
there is no good rom,
and there will be no good rom..
Because it all depends on what suits u best (which only u can tell after trying).
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Replying to ur PM:
When u are going to root, u should look at the firmware u have now, and choose the correct kernel. Don't look at the rom that u are planning to flash.
Siyah v5.0.1 is the latest kernel for ICS, and hence is a good choice. You can use it to root now.
To get SuperNexus (or any other custom rom), u need a working CWM recovery to flash the rom.
Flashing Siyah kernel via odin will install this CWM recovery. You only need to follow the instructions given in the rom's thread after that to install.
There was no good rom,
there is no good rom,
and there will be no good rom..
Because it all depends on what suits u best (which only u can tell after trying).
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
oh thank u so much finally i can understand thats rly good answer man !
thank u i will try it soon actualy now i installed a jelly bean launcher and it looks perfect so i will install rom maybe next week
so thanks for answer
PSYCO1g said:
oh thank u so much finally i can understand thats rly good answer man !
thank u i will try it soon actualy now i installed a jelly bean launcher and it looks perfect so i will install rom maybe next week
so thanks for answer
Click to expand...
Click to collapse
Ur welcome.
Don't forget to add [SOLVED] to the title of ur post after u successfully root.
"To err is human, to forgive is divine"
Sent from my SGS II
Replying to ur PM:
PSYCO1g said:
hey so i thought about it and i want to root now my sgs2 i9100t
ok so i see this tutorital:
http://galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/
so the question i want to ask is should i use the kernel files that in tutorial or use the
SiyahKernel S2-v5.0.1
http://www.gokhanmoral.com/?cat=5
that u said is very good
will they both work ? does it matter what i choose ?
and if yes what to choose and use this root tutorial or theres better ways ?
if yes so tell me if use the siyah kernel or this tutorial
thanks
Click to expand...
Click to collapse
That tutorial uses a CF kernel to root, instead of Siyah kernel. The difference is that CF is simply the stock kernel while Siyah is a custom kernel. You can use both to root.
But on 4.0.4, there is always a risk of using CF kernels due to eMMC Brickbug issue. That's why I suggested Siyah, which is 'safe'. I'm not sure if ur device has the risk of brickbug, but its always better to be safe than sorry.
If you still want to use the stock kernel to root, u can try Philz kernel (its also 'safe').
P.S. The CF kernel in the guide u posted is not the correct version u require. CF kernels and Philz kernels are stock kernels, so u have to find the one that closely matches ur stock kernel.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Replying to ur PM:
That tutorial uses a CF kernel to root, instead of Siyah kernel. The difference is that CF is simply the stock kernel while Siyah is a custom kernel. You can use both to root.
But on 4.0.4, there is always a risk of using CF kernels due to eMMC Brickbug issue. That's why I suggested Siyah, which is 'safe'. I'm not sure if ur device has the risk of brickbug, but its always better to be safe than sorry.
If you still want to use the stock kernel to root, u can try Philz kernel (its also 'safe').
P.S. The CF kernel in the guide u posted is not the correct version u require. CF kernels and Philz kernels are stock kernels, so u have to find the one that closely matches ur stock kernel.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
ok so as u say the best kernel is that match my stock kernel (4.0.4 israel Cellcom) is the Siyah and i just need use the tutorial and use the siyah files and not the ones that in the tutorial ? siyah for sure ? because i googeled about siyah and i find a lot brick bugs about it
are u sure that i should use siyah for my i9100t?
PSYCO1g said:
ok so as u say the best kernel is that match my stock kernel (4.0.4 israel Cellcom) is the Siyah and i just need use the tutorial and use the siyah files and not the ones that in the tutorial ? siyah for sure ? because i googeled about siyah and i find a lot brick bugs about it
are u sure that i should use siyah for my i9100t?
Click to expand...
Click to collapse
Yup.
Put ur phone in Download mode and flash Siyah via Odin as PDA.
Simple as that.
He are a few threads I found on searching for "Siyah brickbug":
http://forum.xda-developers.com/showthread.php?t=1855732
http://forum.xda-developers.com/showthread.php?t=1935094
http://forum.xda-developers.com/showthread.php?t=1923513
What do they tell you?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Yup.
Put ur phone in Download mode and flash Siyah via Odin as PDA.
Simple as that.
He are a few threads I found on searching for "Siyah brickbug":
http://forum.xda-developers.com/showthread.php?t=1855732
http://forum.xda-developers.com/showthread.php?t=1935094
http://forum.xda-developers.com/showthread.php?t=1923513
What do they tell you?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
lol u right i dont see something bad bout the siyah there, my fault then ! anyways so im gonna do it now !
and tell u the results DD
PSYCO1g said:
lol u right i dont see something bad bout the siyah there, my fault then ! anyways so im gonna do it now !
and tell u the results DD
Click to expand...
Click to collapse
Good luck mate! :thumbup:
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Good luck mate! :thumbup:
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Hi bro i did it ! DD
I'm rooted
now i got everytime i power on a yellow tringle and it say i9100 not i9100t xD
and i have the super SU thing
thats great so now im rooted !
so now how can i install the SuperNexus 2.0 ROM ?
should i use it or CM 10.1 and when doing it use the siyah kernel too ?
edit:
hi i downloaded the file and want to install the rom but i dont understand nothing from the instructions
can u explain me it more ? how to do it but so i can understand because i didnt understand how to do it
PSYCO1g said:
Hi bro i did it ! DD
I'm rooted
now i got everytime i power on a yellow tringle and it say i9100 not i9100t xD
and i have the super SU thing
thats great so now im rooted !
so now how can i install the SuperNexus 2.0 ROM ?
should i use it or CM 10.1 and when doing it use the siyah kernel too ?
edit:
hi i downloaded the file and want to install the rom but i dont understand nothing from the instructions
can u explain me it more ? how to do it but so i can understand because i didnt understand how to do it
Click to expand...
Click to collapse
Good job!
The yellow triangle is normal after rooting (some people even consider it a badge of honor).
U can flash the SuperNexus rom in CWM recovery.
Post the instructions that u find confusing.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Good job!
The yellow triangle is normal after rooting (some people even consider it a badge of honor).
U can flash the SuperNexus rom in CWM recovery.
Post the instructions that u find confusing.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
mmm everything xD
i dont understand nothing
it say i need put the files ? where ? i dont have sd card and what folder i need put i rly dont get nothing
Instructions:
Copy Google Apps and SuperNexus ROM to your internal SD Card
Enter Recovery
Do a Wipe/Factory Reset (Necessary if coming from a different a ROM)
Flash SuperNexus ROM
Flash Google Apps
Reboot your device!
Voila!
i dont have sd card where to put it ? if u answer in my phone so where in my phone ?
how i enter to recovery and how i do wipe and factory ?
how to flash supernexus and the gapps ? with odin ?
rly dont get it
can u write me a better instructions so i can understand ?
sorry for bothering u so much but u are rly helping me
some one ?
can u please explain me how to install the SuperNexus 2.0 ROM without sd card ?
By borrowing an SD card.
Sent from the little guy
well i had a samsung galaxy ace and i was using custom roms and i know about roms and kernels and scripts etc
and now i brought galaxy s 2 i9100 and have stock jb 4.1.2 from samsung
i've read almost of guides and knew how to root and that if i want to flash a custom roms i have to flash a stock kernel
but the question is i want the thread that give me the zip to flash on the stock recovery ..to have a custom recovery and download roms normaly
and another question, if i flash a kernel will i be able to download any rom i want or every rom requies different kernel?
so please help me and thanks in advance
nizar.nasani said:
well i had a samsung galaxy ace and i was using custom roms and i know about roms and kernels and scripts etc
i've read almost of guides and knew how to root and that if i want to flash a custom roms i have to flash a stock kernel
and another question, if i flash a kernel will i be able to download any rom i want or every rom requies different kernel?
Click to expand...
Click to collapse
From what I read above, I understood this:
- Either u haven't read like u were supposed to
- Or you have no idea about this stuff
Which is it?
BTW, ur looking for Philz kernel (zip file).
"To err is human, to forgive is divine"
Sent from my SGS II
You need CWM to flash custom ROMs as well as root.
You can get both by flashing a custom kernel.
Which custom kernel? You can find suggestions all over Q&A.
You ca. use any custom kernel with a custom ROM but It'd be wise to stick to the dev suggestion, on the custom ROM thread.
Sent from the little guy
you need cwm.
and signed . so you can flash it in stock recovery.
Sent from my GT-I9100G using xda app-developers app
immortalneo said:
From what I read above, I understood this:
- Either u haven't read like u were supposed to
- Or you have no idea about this stuff
Which is it?
BTW, ur looking for Philz kernel (zip file).
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
gastonw said:
You need CWM to flash custom ROMs as well as root.
You can get both by flashing a custom kernel.
Which custom kernel? You can find suggestions all over Q&A.
You ca. use any custom kernel with a custom ROM but It'd be wise to stick to the dev suggestion, on the custom ROM thread.
Sent from the little guy
Click to expand...
Click to collapse
thanks for you both
im rly thanksful for you
Sent from my GT-S5830 using xda app-developers app
gastonw said:
You need CWM to flash custom ROMs as well as root.
You can get both by flashing a custom kernel.
Which custom kernel? You can find suggestions all over Q&A.
You ca. use any custom kernel with a custom ROM but It'd be wise to stick to the dev suggestion, on the custom ROM thread.
Sent from the little guy
Click to expand...
Click to collapse
if i flashed philz kernel ill be able to install roms and have custom recovery??
nizar.nasani said:
if i flashed philz kernel ill be able to install roms and have custom recovery??
Click to expand...
Click to collapse
Ever thought why Philz didnt just post links to his kernels? Why did he go to all the trouble of creating a thread with detailed info and instructions?
Its for us to read mate!
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Ever thought why Philz didnt just post links to his kernels? Why did he go to all the trouble of creating a thread with detailed info and instructions?
Its for us to read mate!
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
dude please answer me if i flash philz kernel..i will be able to install roms i didnt find the answer
and which one i should use DVLSH (i9100T) - XWLSS - XWLST - XXLSK (i9100P) - ZSLSJ ???? i have to look on my s 2 build number right???or i can flash anyone??
Hey kid, you've got all the answers in front of you.
Sent from the little guy
nizar.nasani said:
dude please answer me if i flash philz kernel..i will be able to install roms i didnt find the answer
and which one i should use DVLSH (i9100T) - XWLSS - XWLST - XXLSK (i9100P) - ZSLSJ ???? i have to look on my s 2 build number right???or i can flash anyone??
Click to expand...
Click to collapse
DL and flash from your SD card Philz 5.00.4 XWLSS (fixed) kernel and custom cwm. This will also root you.
Then you can flash from international memory whatever custom rom you wish.
Signature
Sent from my Samsung GT-i9100M
ROM NeatRom Lite 4.6.1 XWLSN
Kernel: Philz 5.00.4 XWLSS (fixed)
Mods:
23 Fancy Toggles blue w/rt clock
Automatic Call Recorder
NeatRom Boot Animation
NeatRom Lockscreen button
Fixes
MW & Ripple Lockscreen On/Off fix