When the phone starts and the vol. down key is pressed there are different options. I would like detailed information about the boot options of atrix.
Fastboot
NvFlash
BP HW Bypass RSD
BP HW Bypass QC DLOAD
BP HW Diag & Boot AP
BP HW Bypass BP Only
BP HW Bypass RSD
Android Recovery
Boot Android (No BP)
Device UID
console=tty50,115200n8
Early Usb Enumeration
BP tools
RSD
Click to expand...
Click to collapse
So far I know that...
Android Recovery is for CWM recovery for example
Device UID show a number
Boot Android (No BP) boots phone with no telephone signal
What are the purposes for the rest boot options?
Related
motorola atrix svf:105:1:2 failed to boot 0x1000
My problem start when i have a atrix at&t with 2.3.4!!!! i only whant to unlock the bootloader
I use rsd 5.3.1
zomgunlock-lite.sbf
When i carge this file : zomgunlock-lite.sbf
I have this error: SVF message: 105:1:2 failed to boot
No OS detected, going to rsd mode in 5seconds press a key to stop count down available modes are:
1)rsd
2)fastboot
3)NvFlash
4)Bp HW Bypass rsd
5)BP HW bypass QC Dload
6)BP HW diag & Boot AP
7)BP HW Bypass BP only
8)BP SW Bypass RSD
9)Android recovery
10)boot android (no BP)
11)Device UID
12)console=tty50,115200n8
13 Early USB enumeration
14)BP tools
And every i start the cel i have this options!! What i do???
I try to do a fastboot but mu computer dont do nothing when i start the boot....
Help please....
betomss said:
motorola atrix svf:105:1:2 failed to boot 0x1000
My problem start when i have a atrix at&t with 2.3.4!!!! i only whant to unlock the bootloader
I use rsd 5.3.1
zomgunlock-lite.sbf
When i carge this file : zomgunlock-lite.sbf
I have this error: SVF message: 105:1:2 failed to boot
No OS detected, going to rsd mode in 5seconds press a key to stop count down available modes are:
1)rsd
2)fastboot
3)NvFlash
4)Bp HW Bypass rsd
5)BP HW bypass QC Dload
6)BP HW diag & Boot AP
7)BP HW Bypass BP only
8)BP SW Bypass RSD
9)Android recovery
10)boot android (no BP)
11)Device UID
12)console=tty50,115200n8
13 Early USB enumeration
14)BP tools
And every i start the cel i have this options!! What i do???
I try to do a fastboot but mu computer dont do nothing when i start the boot....
Help please....
Click to expand...
Click to collapse
boot into fastboot mode, use the command 'fastboot oem unlock' and follow the instructions from there.
same problem.. how do I recover from this issue.. anybody...
Any ideas..
bbrick said:
same problem.. how do I recover from this issue.. anybody...
Any ideas..
Click to expand...
Click to collapse
Read the previous post. And search. It's not bricked. Well not hard bricked.
http://forum.xda-developers.com/showthread.php?t=1260304
hi
i restarted the phone and accidently pushed power with vol down and that's
gave me some options like :
fastboot
NvFlash
Bypass HW Bypass RSD
Bypass HW Bypass QC DLOAD
Bypass HW Diag Boot AP
Bypass HW Bypass BP Only
Bypass SW Bypass RSD
Android Recovery
Boot Android (No BP)
Device UID
console=ttyS0,115200n8
Early USB Enumeration
BP Tools
RSD
can it be helpful?
Yea we all kno about those menus
Sent from my MB855 using XDA Premium App
Hello,
I've been trying to get my Atrix back to stock condition and am successful to all but one task.
The phone works and boots great into stock but I always get this screen:
PwrReason: PWR_KEY_PRESS
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Byass RSD
5 BP HW Bypass Qc DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyso,1115200n8
13 Early USB Enumeration
14 BP Tools
-----------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
I have no issues with touchscreen, button function etc. but would just like to get rid of this screen before bootup.
I have done the following:
Boot to fastboot
moto-fastboot erase system
moto-fastboot erase boot
moto-fastboot flash system system.img (stock gingerbread img)
moto-fastboot flash boot boot.img (stock gingerbread img)
moto-fastboot -w
motof-fastboot reboot
It changed the CM7 bootloader, all the way back to stock, but I still get the multi choice option screen.
I then did
moto-fastboot erase recovery
moto-fastboot flash recovery recovery.img (using CWM recovery red atrix5)
Nothing!
I then did
moto-fastboot flash pds pdsfix.img
just to see if anything changes..nothign!
The only thing left to try is RSD-Lite and SBF flashing.. would that give me any different results?
*Trying to get my Atrix 4g back to stock gingerbread
five5outh said:
Hello,
I've been trying to get my Atrix back to stock condition and am successful to all but one task.
The phone works and boots great into stock but I always get this screen:
PwrReason: PWR_KEY_PRESS
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Byass RSD
5 BP HW Bypass Qc DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyso,1115200n8
13 Early USB Enumeration
14 BP Tools
-----------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
I have no issues with touchscreen, button function etc. but would just like to get rid of this screen before bootup.
I have done the following:
Boot to fastboot
moto-fastboot erase system
moto-fastboot erase boot
moto-fastboot flash system system.img (stock gingerbread img)
moto-fastboot flash boot boot.img (stock gingerbread img)
moto-fastboot -w
motof-fastboot reboot
It changed the CM7 bootloader, all the way back to stock, but I still get the multi choice option screen.
I then did
moto-fastboot erase recovery
moto-fastboot flash recovery recovery.img (using CWM recovery red atrix5)
Nothing!
I then did
moto-fastboot flash pds pdsfix.img
just to see if anything changes..nothign!
The only thing left to try is RSD-Lite and SBF flashing.. would that give me any different results?
*Trying to get my Atrix 4g back to stock gingerbread
Click to expand...
Click to collapse
This sounds like your boot logo, there are instructions to create / flash logos here ....
http://forum.xda-developers.com/showthread.php?t=1187337
theonepom said:
this sounds like your boot logo, there are instructions to create / flash logos here ....
http://forum.xda-developers.com/showthread.php?t=1187337
Click to expand...
Click to collapse
Ended up flashing the stock boot.img using fastboot and it worked!
Ended up using this: (The stock one in the OPs post was blurred)
http://forum.xda-developers.com/showpost.php?p=16527848&postcount=47
moto-fastboot flash boot boot.img
Thanks!
five5outh said:
Ended up flashing the stock boot.img using fastboot and it worked!
Ended up using this: (The stock one in the OPs post was blurred)
http://forum.xda-developers.com/showpost.php?p=16527848&postcount=47
moto-fastboot flash boot boot.img
Thanks!
Click to expand...
Click to collapse
Cool, glad that worked for you.
Now that it's fixed, maybe you can change the OP title to include "SOLVED".
*I am a N00b*
Hello all,
I have the XT830C (Tracfone) version Moto E, and I just turned it on after not using it for a while and it's stuck in "Fastboot mode" with the the normal options
Normal powerup
Recovery
Factory
Barcodes
BP Tools
QCOM
And below it says:
hab check failed for system
failed to validate system image
Fastboot Reason: Fall-through from normal boot mode
...
So I am wondering how to be able to boot up normally again. I have the firmware for it but no idea how I'd be able to flash it. I am unrooted and I have not tampered with the system in any way.
Help is gladly appreciated, thank you!
My device is " 10 or D (3gb) " :
Chipset :- Qualcomm Snapdragon 425
OS :- Stock android was 7.1.2 but, upgraded to 8.1 (Oreo).
Before 10 days i executed a command -- fastboot oem lock -- this command was executed successfully, But after this my device was not booting, when i long press lock button than there was a boot logo for just 0.5 sec and nothing.
After this my device was recognized as -- QH_BULK -- when i installed qualcomm drives, then it was shown as --Qualcomm_Qd_loader 900E -- . I tried some combinations of buttons then finally got --Qualcomm_QD-loader 9008 .
When i searched about "Qd loader 9008" then i found to flash my Stock firmware by QFIL tool. I flashed my Stock rom many times but, also after a successful flash my phone is not booting, also now there is no boot screen after pressing power button. Its now completely black, but charger LED is glowing.
I have still a hope. I searched about my problem, then i found that either my --emmc storage-- is corrupted or the command i executed --fastboot oem lock-- is preventing partitions from overwriting .
Now if my emmc storage is corrupted than i think i have to boot my device from SD Card. Is someone have " emmc.img " of " 10 or D " then please share with me.
Now the situation is, my phone have totally blank screen, LED indicater is glowing red, on connecting to PC Device manager shows it as "Qualcomm_QDLoader 9008",
Also i tried to give a command --fastboot oem unlock-- at this moment. But fastboot is not recognizing my device. On typing --Fastboot devices-- no device is listed.
How could i unlock oem to flash rom.
Hi i download another stock rom of my device which was maybe a fastboot rom because there was a fastboot.bat script in it.
I tried to flash it by miflash tool. Flash took 4 seconds and ended with error message.
After this now my device is recorgnized as
Qualcomm_hs-usb_diagnostic 900E
And now my device started vibrating a little after pressing lock key or volume key
I tried many key combinations but it is not getting qd loader 9008 mode.
I also tried to disconnect battrey connector and then connected to pc but still in 900E mode.
Help me to get 9008 edl mode