After updating from stock 2.3.3 To Gen.Y Vision X ROM, callers faced some terrible echo when speaking with me. I updated Radio to one suggested and it was fixed. Soon after this update speaker in my phone failed. So I have 2 questions. Could that failure be caused by radio firmware? How should I choose radio software to flash?
After getting my phone fixed (not without troubles, because device is rooted, and I didn't clean it up properly) I didn't flashed new radio yet. I did flashed latest Gen'Y Vision X ROM. May I flash radio after ROM without any problems, or should I flash Radio and than ROM?
Thanks for any answers and suggestions..
Eloar said:
After updating from stock 2.3.3 To Gen.Y Vision X ROM, callers faced some terrible echo when speaking with me. I updated Radio to one suggested and it was fixed. Soon after this update speaker in my phone failed. So I have 2 questions. Could that failure be caused by radio firmware? How should I choose radio software to flash?
After getting my phone fixed (not without troubles, because device is rooted, and I didn't clean it up properly) I didn't flashed new radio yet. I did flashed latest Gen'Y Vision X ROM. May I flash radio after ROM without any problems, or should I flash Radio and than ROM?
Thanks for any answers and suggestions..
Click to expand...
Click to collapse
Looks like Radio wasn't cause of speaker failure. I did flashed new radio, wiped ROM and flashed ROM and have no problem with echo since then. Radio I've chosen is same one suggested by Gen.Y Vision X ROM publisher.
Related
hey
i have been running an android build and several different custom roms on my hd2.
everything was great, then suddenly my audio was gone. i can hear phone calls, not any kind of media, notifications, etc. is gone. no tone even when using the dialer.
searched everywhere for a fix. nothing. even put a call into tmo for replacement...have recently flashed back to original ROM.
any ideas...because im not sure if my warranty is voided and i really dont feel like being charged for new device.
thanks in advance
android build: darkstone v3
win/mo: 3.14.531.0 wwe
radio: 2.14.50
hmmmmm......seems you need the new updated stock tmous rom 3.14 with radio 2.15...you have a radio 2.14???
heard the first leaked rom 3.14 with radio 2.14 has problems
thank you
so if i flash radio 2.15...you think that might work ?
bucksatan said:
thank you
so if i flash radio 2.15...you think that might work ?
Click to expand...
Click to collapse
where did you get your rom upgrade from?...from t mobile site or the one posted by xda member (i think, football ?)
i think you should re-download the rom files and flash again
yes. xda football.
will do.
gracias.
reflashed still no audio
flashed new ROM and new radio still no speaker audio works when headset is plugged in...hardware ??
Did you droped the phone recently or took a bath with it?
If so then it's a hardware problem..
Got an HD2 TIM (Telecom Italia Mobile) branded with ROM 1.72.901.1 and Radio 2.07.51.22_2. TIM lock was removed by someone else and first I installed Artemis 4.5 but it was really sluggish so I downloaded stock 3.14 version from HTC and installed it which brought the system back to regular Win with logo on top (Artemis had it at the bottom). ROM was
_HTCHD2_RUU_Leo_S_HTC_ITA_3.14.408.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
What I noticed is that the radio is not what is on the above link but instead has remained the old one 2.07.51.22_2.
Shouldn't the ROM upgrade have changed the radio too with the new one (2.15.50.14 in this case)?
In either case Android on the SD card did not work and the phone gets stuck at the black screen with the really tiny lines of text. I tried a few of the major builds of Android with the same results.
Since Clearcad removes windows from memory the version of Windows should not matter and the only thing left is the radio but can it block the loading of Android or could it be the fact that it was a carrier (TIM) branded phone (can't really imagine that the carrier has had HTC make specific hardware mods to screw up changes to it)?
I have downloaded the 2.15.50.14 radio by itself but when I tried to install it the SSPL program tell me that it wants to replace the existing ROM 3.14 with this so I stopped. If I continue will the radio upgrade just replace the radio section or will it replace everything? Tried to look at other posts but everyone is different and couldn't find a situation similar to mine.
Any help is really appreciated.
Thanks
Paolo
Sounds like problem after problem mate!
For sure, you do need to upgrade the radio. 2.07.xxxxx is just too old. It needs to be at least 2.08.50 (not 51), but I would strongly recommend the one you talk about yourself (2.15.50).
Flashing just the radio will not erase anything on your phone. Only a ROM flash will do that.
i had the same problem running android on my hd2............then i update my radio version to 2.12 then it worked.........
Thanks
Thanks guys
I was afraid the radio might have been the culprit.
Given the info in my original post above can you tell me what I should do and which program I should use to flash the new radio trying to minimize the risk to brick the thing and should I re-install the ROM afterward ?
Why the ROM upgrade did not take care of the radio upgrade in the first place?
Paolo
paolo.dc said:
Thanks guys
I was afraid the radio might have been the culprit.
Given the info in my original post above can you tell me what I should do and which program I should use to flash the new radio trying to minimize the risk to brick the thing and should I re-install the ROM afterward ?
Why the ROM upgrade did not take care of the radio upgrade in the first place?
Paolo
Click to expand...
Click to collapse
The ROM upgrade should have upgraded the radio at the same time. If it's not big deal to you, I'd flash the ROM again to see if it has any effect.
No changes
reinstalled official 3.14 but radio stays at 2.07.51.22_2
Still don't know what is the program to install new radio and if I risk bricking the phone doing it. It seems strange that it doesn't allow the upgrade from within the rom.
Now I need to look for rom 1.72.901.1 to go back to the origins.
Suggestions on best way to install new radio is appreciated.
Paolo
I just installed cherry pie rom no crust and im not using an overclocked kernel but now im only getting on bar of signal im using radio n 1.97.00r which I believe is the correct radio also have flashed just about every rom their is don't know if it has anything to due with it some help would be much appreciated
Yes this radio is not recommended to use, got problems like this one bar issue, it's a leaked radio.
Use this radio , the official radio from AT&T to GingerBread system :
http://forum.xda-developers.com/showthread.php?t=1163009
But, i don't know about radio downgrade .. didn't try it .
So wait for someone to confirm that it is safe.
Thanks for the response not sure about downgrading either will wait for reply if I go for it ill post results
I just flashed that radio using cam and prob solved no issues
Use cwm recovery downgrad ok !
Hi Guys,
You are now my final hope!!!
I am trying for 3 days now to upgrade the radio version of my Desire V to 1.10 (Currently I'm running on1.06)
I have installed several ROM's an tried to run OTA updates, but none of them actually updated my radio to 1.10
Can someone provide me the zip file or a clear instructiuon on how to update my radio to 1.10?
I'm now running on the HTC_T328W_Asia-WWE_1.73.707.1_Stock ROM (found here : http://forum.xda-developers.com/showthread.php?t=2343623 )
Radio is on 1.06.34D.05_20.22.30.23U
I'm looking for radio version 1.10.34D.17_20.26.30.27U
My girlfriends Desire V is actually running on this radio and exact the same kernel (1.73.707.1)
Using "getprop ro.cid" I get back HTCCN703 (China Version)
bobbes1974 said:
Hi Guys,
You are now my final hope!!!
I am trying for 3 days now to upgrade the radio version of my Desire V to 1.10 (Currently I'm running on1.06)
I have installed several ROM's an tried to run OTA updates, but none of them actually updated my radio to 1.10
Can someone provide me the zip file or a clear instructiuon on how to update my radio to 1.10?
I'm now running on the HTC_T328W_Asia-WWE_1.73.707.1_Stock ROM (found here : http://forum.xda-developers.com/showthread.php?t=2343623 )
Radio is on 1.06.34D.05_20.22.30.23U
I'm looking for radio version 1.10.34D.17_20.26.30.27U
My girlfriends Desire V is actually running on this radio and exact the same kernel (1.73.707.1)
Using "getprop ro.cid" I get back HTCCN703 (China Version)
Click to expand...
Click to collapse
the problem is that your phone was born in china and you will flash a TW Radio image.. and before you're not have a TW CID or SUPER CID you are NOT PERMITTED to do an update of your Radio
maybe an update to latest chinese Radio is possible
if i could get a chinese rom... I should solve your issue..
Sent from my HTC Desire V using xda premium
tomcatz666 said:
the problem is that your phone was born in china and you will flash a TW Radio image.. and before you're not have a TW CID or SUPER CID you are NOT PERMITTED to do an update of your Radio
maybe an update to latest chinese Radio is possible
if i could get a chinese rom... I should solve your issue..
Sent from my HTC Desire V using xda premium
Click to expand...
Click to collapse
Maybe you can use ROM found here : http://forum.xda-developers.com/showthread.php?t=2343623
bobbes1974 said:
Maybe you can use ROM found here : http://forum.xda-developers.com/showthread.php?t=2343623
Click to expand...
Click to collapse
I need the full RUU (or the ROM.Zip outta there).. boot,img and recovery.img are not enough. sorry
but I found a source for the last Chinese RUU
http://pan.baidu.com/share/link?shareid=53606&uk=2301607189
after I extracted this, I can prepare a file, maybe it works for this issue
bobbes1974 said:
Hi Guys,
You are now my final hope!!!
.....
Using "getprop ro.cid" I get back HTCCN703 (China Version)
Click to expand...
Click to collapse
Ok, I have the same version. I was in same condition as you and it was needed of two OTA to get radio 1.10. It will be and a third update but that is for some chinese apps (11 of them) - don't bother.
Good luck!
Here is a thread with all official versions, RUU and ROM for this version of Desire V. It's chinese but numbers are readable.
carliv said:
Ok, I have the same version. Here is a ROM clean stock from tha last RUU 1.71.1402.4 with radio version 1.08. Here are stock signed boot and recovery. Download these, follow the steps from that page you mentioned before, and you will return to stock, then you can do OTA updates. I was in same condition as you and it was needed of two OTA to get radio 1.10. It will be and a third update but that is for some chinese apps (11 of them) - don't bother.
Good luck!
PS. Here is a thread with all official versions, RUU and ROM for this version of Desire V. It's chinese but numbers are readable.
Click to expand...
Click to collapse
Pfffffffff
This took some time and effort.
First I had to reload the Original China ROM
OTA updates were loaded, however, they did not install
Several other ROM's were loaded, but no succes at all
Then I locked the bootloader again en downloaded the correct RUU
Installed the RUU using the PC over the Original China ROM I installed myself
After this, the Phone installed several OTA updates
Finally my radio was updated to version 1.10
Then unlocked the bootloader again
installed the European ROM and all is runnig fine now
Thank you for the information!!!
bobbes1974 said:
Pfffffffff
This took some time and effort.
First I had to reload the Original China ROM
OTA updates were loaded, however, they did not install
Several other ROM's were loaded, but no succes at all
Then I locked the bootloader again en downloaded the correct RUU
Installed the RUU using the PC over the Original China ROM I installed myself
After this, the Phone installed several OTA updates
Finally my radio was updated to version 1.10
Then unlocked the bootloader again
installed the European ROM and all is runnig fine now
Thank you for the information!!!
Click to expand...
Click to collapse
If after installation of the original China ROM, you did flash stock recovery and boot, and lock the bootloader, than I can assure you the OTA will install. But if you have custom recovery and bootloader unlocked, OTA will be downloaded but not installed.
I know you solved this, but for the other readers who wants to do that I have to say it.
I have been using Android Revolution HD 21.0. My call quality is good but every minute or so it garbles and it is impossible to hear what is being said.
In my research I have found that this problem can be fixed by flashing a radio.
My current build number is "3.17.401.2 CL245412 release-keys"
My current radio is "4A.17.3250.14_10.39.1150.04L"
My phone is S-ON
I am on the UK H3G network.
My questions are:
Which radio should I try flashing?
Is it safe to flash any radio?
Has anyone encountered this issue before?
What else should I try?
Thanks!