Hey guy, my Galaxy S2 has NAND RW Corruption simptons:
Enters Download mode but does NOT enter recovery mode (usually means a NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
Bootloop
so ive tried to follow all the passes of this topic:
http://forum.xda-developers.com/showthread.php?t=1457458
[[GUIDE] Fix an unflashable or soft bricked GSII (I9100G/M/P/T VERSION INCLUDED!)]
, but it always get stuck on "<ID:0/003> NAND Write Start!! "
heres the log:
First Try:
ROM LOG:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
Second Try
KERNEL Log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Kernel_I9100XXLPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
Third Try
BootLoader LOG:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
4th Try:
Re-Partition LOG(PIT):
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
//
All of them freeze , i just dont know what to do...
When i enter at Odin Mode this appears:
Product Name: GT-i9100
Custom Binary Download: NO
Current Binary: Samsung Official
!
I Cant afford to let it be fixed by Samsung, its to expensive(1000 REIAS, its around 500 Dollars here in my country).
And its not in warranty anymore
I Just dont know what to do anymore, please, help....
Sorry if there is english errors, im from Brazil...
Ive tried the "Original Samsung Rom" also and some others roms... Nothing seems to solve
ive aready tried other computer and others USB .
Im really concerned about it ! I just dont know what to do anymore... im in shock... really
You guys are my last hope
Sounds like the emmc chip is dead.
If you can find a chip from another board you can have it replaced and it should fix your problem.
Finding the part in open market is impossible unless China has some secret cache of them somewhere.
Sent from my SGH-I897 using Tapatalk 2
You need a patched .pit file to solve that.
Visit this thread
one of the first 9 pit files should work for you. you have to keep trying coupled with the first guide you were following.
Jokesy said:
You need a patched .pit file to solve that.
Visit this thread
one of the first 9 pit files should work for you. you have to keep trying coupled with the first guide you were following.
Click to expand...
Click to collapse
tried the first 14 and none of them solve
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Also Tried:
i9100_u1_02_20110310_emmc_EXT4-patched-standard
marceloasr said:
tried the first 14 and none of them solve
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Also Tried:
i9100_u1_02_20110310_emmc_EXT4-patched-standard
Click to expand...
Click to collapse
Sorry bro. I think your Nand is totally messed up.
you may have to replace the Motherboard of your phone to fix this.
there are two options available:
1. Use warrant to fix your problem for free, if your phone is still under warranty.
or
2. Repair it yourself or at a repair store.
it costs between 130 - 200 USD
Jokesy said:
Sorry bro. I think your Nand is totally messed up.
you may have to replace the Motherboard of your phone to fix this.
there are two options available:
1. Use warrant to fix your problem for free, if your phone is still under warranty.
or
2. Repair it yourself or at a repair store.
it costs between 130 - 200 USD
Click to expand...
Click to collapse
It isnt under warranty anymoore ! And here in my country its 1000 reais( its about 500 dolars) to fix it at Samsung, cant afford it
//
Isnt there an ultimate way, or something like this? Even if its really dangerous... anything... because look likes that is dead already
marceloasr said:
It isnt under warranty anymoore ! And here in my country its 1000 reais( its about 500 dolars) to fix it at Samsung, cant afford it
//
Isnt there an ultimate way, or something like this? Even if its really dangerous... anything... because look likes that is dead already
Click to expand...
Click to collapse
what?
You can try a third party Repair center.
marceloasr said:
It isnt under warranty anymoore ! And here in my country its 1000 reais( its about 500 dolars) to fix it at Samsung, cant afford it
//
Isnt there an ultimate way, or something like this? Even if its really dangerous... anything... because look likes that is dead already
Click to expand...
Click to collapse
I'm sorry for what happen man. You should try third party service store.
But before you do, have you try different flash file? Maybe the problem is corrupt downloaded file.
Sent from my GT-I9100 using Tapatalk 2
jati1981 said:
I'm sorry for what happen man. You should try third party service store.
But before you do, have you try different flash file? Maybe the problem is corrupt downloaded file.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yeah... I had... If in the USA the motherboard is around $200 indont believe that an third party service will be anything close to cheap here... Problaby around 350~400 dolars, what still very expensive for me... But thanks for the help
Are u guys sure that is the main board? If i buy an used one and change it will work? It cant be antthing else, right?
marceloasr said:
Are u guys sure that is the main board? If i buy an used one and change it will work? It cant be antthing else, right?
Click to expand...
Click to collapse
It's the motherboard. Btw you can try all the pit files with bootloader combinations and see if you would be lucky
Jokesy said:
It's the motherboard. Btw you can try all the pit files with bootloader combinations and see if you would be lucky
Click to expand...
Click to collapse
I dont need to flash the bootloader and the pit on the same time, do i? Because Odin will try to flash the pit first, and just then the bootloader, right? I may flash just the pit, and if its flash(really doubt) , then i flash the bootloader, right?
marceloasr said:
I dont need to flash the bootloader and the pit on the same time, do i? Because Odin will try to flash the pit first, and just then the bootloader, right? I may flash just the pit, and if its flash(really doubt) , then i flash the bootloader, right?
Click to expand...
Click to collapse
Please go through this thread: forum.xda-developers.com/showthread.php?t=1615058
I have news:
ive flash the s2 with pit: " i9100_u1_02_20110310_emmc_EXT4-patched-standard " and bootloader: "I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar"
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Them ive flash it with pit: i9100_u1_02_20110310_emmc_EXT4-patched-standard and rom: "I9100XXLPH"
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> factoryfs.img
<ID:0/004> data.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
It flashed, the problem is that it still with the same problem... did not solve !
so ive tried just the rom:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> factoryfs.img
<ID:0/004> data.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
but did not solve too
Its interesting because when its freeze even in "charging" logo, heres a screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
still:
Enters Download mode but does NOT enter recovery mode (usually means a NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
Bootloop
Jokesy said:
Please go through this thread: forum.xda-developers.com/showthread.php?t=1615058
Click to expand...
Click to collapse
Tried to follow this:
http://www.pocketpc.ch/samsung-gala...ranleitung-bereinigung-bootproblemen-etc.html
that i found there... but nothing
http://forum.xda-developers.com/showthread.php?t=1615058&page=51
But, now that it is flashing is there any chance to recover my S2?
marceloasr said:
Tried to follow this:
http://www.pocketpc.ch/samsung-gala...ranleitung-bereinigung-bootproblemen-etc.html
that i found there... but nothing
http://forum.xda-developers.com/showthread.php?t=1615058&page=51
But, now that it is flashing is there any chance to recover my S2?
Click to expand...
Click to collapse
Yes, it's possible. You have to keep trying, there is nothing to lose at this stage.
Jokesy said:
Yes, it's possible. You have to keep trying, there is nothing to lose at this stage.
Click to expand...
Click to collapse
isnt odd(strange) the S2 not even charge? to charge i have to remove the batterie and charge on a special battery charge, because if i try to charge it over USB, its freeze(like in the picture i posted)
is there any rom that delete everything? really wipe my phone to try?
marceloasr said:
isnt odd(strange) the S2 not even charge? to charge i have to remove the batterie and charge on a special battery charge, because if i try to charge it over USB, its freeze(like in the picture i posted)
is there any rom that delete everything? really wipe my phone to try?
Click to expand...
Click to collapse
Yes.
Visit the official CM9 discussion thread. Download CM9 Resurrection edition. It's in .tar Odin format. So just flash it via Odin.
Jokesy said:
Yes.
Visit the official CM9 discussion thread. Download CM9 Resurrection edition. It's in .tar Odin format. So just flash it via Odin.
Click to expand...
Click to collapse
Yeah... tried this one: cm-9-20120420-ODIN-galaxys2.tar , it flashed, but did not solve, still the same problem
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> modem.bin
<ID:0/004> factoryfs.img
<ID:0/004> data.img
<ID:0/004> boot.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
//////
How long should take to odin flash a rom? Because its fast here(0:59 sec ~ 1 min)... is It normal?
marceloasr said:
Yeah... tried this one: cm-9-20120420-ODIN-galaxys2.tar , it flashed, but did not solve, still the same problem
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> modem.bin
<ID:0/004> factoryfs.img
<ID:0/004> data.img
<ID:0/004> boot.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
//////
How long should take to odin flash a rom? Because its fast here(0:59 sec ~ 1 min)... is It normal?
Click to expand...
Click to collapse
I think your nand is really messed up. You probably have to get the motherboard replaced.
Hi to all.
I have a galaxy gt i9100 an 4.0.3 on it. I flashed siyah kernel 5.0.1 with odin and no my phone does not boot. Its stock on screen displaying Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
I try to flash rom I9100XWLS8 with odin and i only get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I can`t flash anything with odin. pls help me.
Sorry for my english.
Re: [Q] Firmware upgrade encountered and issue
What state is the phone in now. What modes can you access?
Sent from my GT-I9100 using xda premium
Its stuck on screen displaying Firmware upgrade encountered and issue. I can access only download mode.
Re: [Q] Firmware upgrade encountered and issue
And your phone is no longer recognised by odin?
Sent from my GT-I9100 using xda premium
Odin is recognising my phone, but when i try to flash a rom i get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Re: [Q] Firmware upgrade encountered and issue
Ok re download the rom from samfirmware and try again. Not sure if it's a single PDA file or several CSC modem etc. Reflash.
Sent from my GT-I9100 using xda premium
I tried but i only get Complete(Write) operation failed
YUPEEEEEE:victory::victory::victory::victory::victory:
I got it.
I downloaded odin 1.3 and flashed successfully my phone.
Here is odin 1.3 if someone needs it.
View attachment Odin3_v1.3.rar
Well done mate.
Sent from my GT-I9100 using xda premium
HaHa congrats
I have tried everything posted above
In addition my model is GT-I9100G
doesnt go to download mode or recovery mode (earlier it was)
Earlier i was facing an issue that whenever i start it....it displayed "CWM 6.0.3.2" "WARNING : No file_contexts"
Please help
I'm getting the same problem on my sm-g318h trend 2 lite but it doesn't get fixed like his.
Getting this so far
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
Should I pull the cable or what? Very confused.
It's just stuck there and the blue thing is no longer moving on the device.
Probable bad firmware file .
Skander1998 said:
Getting this so far
Code:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
boot.img
NAND Write Start!!
recovery.img
system.img
Should I pull the cable or what? Very confused.
It's just stuck there and the blue thing is no longer moving on the device.
Click to expand...
Click to collapse
Happen to me long time ago when flashing another region firmware...what I do I just pull out the battery and re-enter again download mode...when it stuck just pull out the battery and flash again until it show pass...
danierakes said:
Happen to me long time ago when flashing another region firmware...what I do I just pull out the battery and re-enter again download mode...when it stuck just pull out the battery and flash again until u success...
Click to expand...
Click to collapse
That worked.
Solved.
hi i'm using sprint galaxy mega(sph-l600)
but my phone is brick ...
and unable to flash with odin.
so, plz share to me sph-l600 pit file??
have a good today.
========================= modify my situation ===========================
My situation is soft brick. and do not working to flashing with odin.
always fail to flash System.img.ext4.. I've tried change usb port and usb cable. but fail..
So, I'm gonna try flash with PIT file. but I don't have SPH-L600 PIT file....
attacted my situation.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L600VPUAMK1_L600SPTAMK1_L600VPUAMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
raor said:
hi i'm using sprint galaxy mega(sph-l600)
but my phone is brick ...
and unable to flash with odin.
so, plz share to me sph-l600 pit file??
have a good today.
Click to expand...
Click to collapse
Hi..i don't have this model but to flash a pit file you need odin to flash it as the phone has to be in download mode also and if the phone cannot be put into this mode then flashing cannot be done, if it is a hard brick (hardware related) then the phone will require a jtag service to repair it. does the phone still come on to the mega screen?
Thank you for quick reply
starmaster10 said:
Hi..i don't have this model but to flash a pit file you need odin to flash it as the phone has to be in download mode also and if the phone cannot be put into this mode then flashing cannot be done, if it is a hard brick (hardware related) then the phone will require a jtag service to repair it. does the phone still come on to the mega screen?
Click to expand...
Click to collapse
Thank you for quick reply. but my situation is soft brick. and do not working to flashing with odin.
always fail to flash System.img.ext4.. I've tried change usb port and usb cable. but fail..
So, I'm gonna try flash with PIT file. but I don't have SPH-L600 PIT file....
attacted my situation.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L600VPUAMK1_L600SPTAMK1_L600VPUAMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Will flashing a firmware with odin delete data?
Sent from my SM-G925F using Tapatalk
KingUsman said:
Will flashing a firmware with odin delete data?
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Always back up your data
Always assume flashing anything will delete your data.
If you are talking about the 6.0.1 firmware, nope it didn´t delete any of my data. Like always, search before opening a new thread.
Kirkland301 said:
Always assume flashing anything will delete your data.
Click to expand...
Click to collapse
i have problem with hidden.img on uk 6.0.1 firmware. odin says failed when I try to flash this file.
here is the log:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: sorry, i found the solution on this thread: http://forum.xda-developers.com/galaxy-s6-edge/help/odin-fail-hidden-img-t3154903.
thanks