Will flashing a firmware with odin delete data?
Sent from my SM-G925F using Tapatalk
KingUsman said:
Will flashing a firmware with odin delete data?
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Always back up your data
Always assume flashing anything will delete your data.
If you are talking about the 6.0.1 firmware, nope it didn´t delete any of my data. Like always, search before opening a new thread.
Kirkland301 said:
Always assume flashing anything will delete your data.
Click to expand...
Click to collapse
i have problem with hidden.img on uk 6.0.1 firmware. odin says failed when I try to flash this file.
here is the log:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: sorry, i found the solution on this thread: http://forum.xda-developers.com/galaxy-s6-edge/help/odin-fail-hidden-img-t3154903.
thanks
Related
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300ZSEMB1_I9300OZSEMB1_899179_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
What should I do now? It stucks and I don't want to lose my data.
Remove battery make sure Kies is not running in the takbar .
Flash again
Same problem download firmware and flash .
You may have lost your data rule one back up efs rule two backup data
jje
JJEgan said:
Remove battery make sure Kies is not running in the takbar .
Flash again
Same problem download firmware and flash .
You may have lost your data rule one back up efs rule two backup data
jje
Click to expand...
Click to collapse
Think those rules need to be made in to a banner for XDA
How long has it been stuck on system for?
try other verson of odin
Sent from my GT-I9300 using xda premium
hi i'm using sprint galaxy mega(sph-l600)
but my phone is brick ...
and unable to flash with odin.
so, plz share to me sph-l600 pit file??
have a good today.
========================= modify my situation ===========================
My situation is soft brick. and do not working to flashing with odin.
always fail to flash System.img.ext4.. I've tried change usb port and usb cable. but fail..
So, I'm gonna try flash with PIT file. but I don't have SPH-L600 PIT file....
attacted my situation.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L600VPUAMK1_L600SPTAMK1_L600VPUAMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
raor said:
hi i'm using sprint galaxy mega(sph-l600)
but my phone is brick ...
and unable to flash with odin.
so, plz share to me sph-l600 pit file??
have a good today.
Click to expand...
Click to collapse
Hi..i don't have this model but to flash a pit file you need odin to flash it as the phone has to be in download mode also and if the phone cannot be put into this mode then flashing cannot be done, if it is a hard brick (hardware related) then the phone will require a jtag service to repair it. does the phone still come on to the mega screen?
Thank you for quick reply
starmaster10 said:
Hi..i don't have this model but to flash a pit file you need odin to flash it as the phone has to be in download mode also and if the phone cannot be put into this mode then flashing cannot be done, if it is a hard brick (hardware related) then the phone will require a jtag service to repair it. does the phone still come on to the mega screen?
Click to expand...
Click to collapse
Thank you for quick reply. but my situation is soft brick. and do not working to flashing with odin.
always fail to flash System.img.ext4.. I've tried change usb port and usb cable. but fail..
So, I'm gonna try flash with PIT file. but I don't have SPH-L600 PIT file....
attacted my situation.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L600VPUAMK1_L600SPTAMK1_L600VPUAMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Now that it flashed in Odin successfully can you get into the stock recovery? Sounds like you need to do a factory reset if you can get into recovery.. If not take that piece into Verizon they will give her a new phone
Sent from my SCH-I605 using xda app-developers app
Fixed it, I had to odin my s3 back to stock in order to get that verizon upgrade assistant program to install and I connected note 2 in odin mode and did a repair device which basically wiped it for me and its working again ^_^
RedRumy3 said:
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
Click to expand...
Click to collapse
The real question is are all your buttons working properly? if you are in odin mode and done a flash, you now have to go into recovery mode and wipe out other things from the previous update so you are not stuck,
http://www.android.gs/update-verizo...-official-android-4-4-2-vrufnd7-ota-firmware/
i ve been trying to update my phone it was updated successfully now it is justs stuck on boot loap again and again its showing just GALAXY NOTE 2 i treid to get it in recovery mode i couldnt :S it is going to download mode only can you please tell me how can i get out of this loop assap :S
i am trying to install the stock rom
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
but its getting stopped on recovery it says failed :S can anyone help me to get my phone runnin?
i ve tried to install the alternative version and it says this software does not made by verzion something like that. Can anyone would help me get my device fixed?????
when i ve joined this forum back in 2009 people used to help each other now no one gives a dam.!
i FIXED IT BY MYSELF
hi_john said:
i FIXED IT BY MYSELF
Click to expand...
Click to collapse
how did you fix it?
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5
Click to expand...
Click to collapse
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Smaali said:
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Click to expand...
Click to collapse
Camera has ben fixed i made a patch for it ;0
fufle said:
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
Click to expand...
Click to collapse
You don't downloaded the right version download the one for your carrier and region
And don't try to downgrade knox will block you if you try to downgrade