http://www.android.gs/update-verizo...-official-android-4-4-2-vrufnd7-ota-firmware/
i ve been trying to update my phone it was updated successfully now it is justs stuck on boot loap again and again its showing just GALAXY NOTE 2 i treid to get it in recovery mode i couldnt :S it is going to download mode only can you please tell me how can i get out of this loop assap :S
i am trying to install the stock rom
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
but its getting stopped on recovery it says failed :S can anyone help me to get my phone runnin?
i ve tried to install the alternative version and it says this software does not made by verzion something like that. Can anyone would help me get my device fixed?????
when i ve joined this forum back in 2009 people used to help each other now no one gives a dam.!
i FIXED IT BY MYSELF
hi_john said:
i FIXED IT BY MYSELF
Click to expand...
Click to collapse
how did you fix it?
Related
hi i'm using sprint galaxy mega(sph-l600)
but my phone is brick ...
and unable to flash with odin.
so, plz share to me sph-l600 pit file??
have a good today.
========================= modify my situation ===========================
My situation is soft brick. and do not working to flashing with odin.
always fail to flash System.img.ext4.. I've tried change usb port and usb cable. but fail..
So, I'm gonna try flash with PIT file. but I don't have SPH-L600 PIT file....
attacted my situation.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L600VPUAMK1_L600SPTAMK1_L600VPUAMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
raor said:
hi i'm using sprint galaxy mega(sph-l600)
but my phone is brick ...
and unable to flash with odin.
so, plz share to me sph-l600 pit file??
have a good today.
Click to expand...
Click to collapse
Hi..i don't have this model but to flash a pit file you need odin to flash it as the phone has to be in download mode also and if the phone cannot be put into this mode then flashing cannot be done, if it is a hard brick (hardware related) then the phone will require a jtag service to repair it. does the phone still come on to the mega screen?
Thank you for quick reply
starmaster10 said:
Hi..i don't have this model but to flash a pit file you need odin to flash it as the phone has to be in download mode also and if the phone cannot be put into this mode then flashing cannot be done, if it is a hard brick (hardware related) then the phone will require a jtag service to repair it. does the phone still come on to the mega screen?
Click to expand...
Click to collapse
Thank you for quick reply. but my situation is soft brick. and do not working to flashing with odin.
always fail to flash System.img.ext4.. I've tried change usb port and usb cable. but fail..
So, I'm gonna try flash with PIT file. but I don't have SPH-L600 PIT file....
attacted my situation.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L600VPUAMK1_L600SPTAMK1_L600VPUAMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Now that it flashed in Odin successfully can you get into the stock recovery? Sounds like you need to do a factory reset if you can get into recovery.. If not take that piece into Verizon they will give her a new phone
Sent from my SCH-I605 using xda app-developers app
Fixed it, I had to odin my s3 back to stock in order to get that verizon upgrade assistant program to install and I connected note 2 in odin mode and did a repair device which basically wiped it for me and its working again ^_^
RedRumy3 said:
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
Click to expand...
Click to collapse
The real question is are all your buttons working properly? if you are in odin mode and done a flash, you now have to go into recovery mode and wipe out other things from the previous update so you are not stuck,
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
Man I'm in the same boat
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.t ar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
benhix said:
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.t ar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
Click to expand...
Click to collapse
With the 4.3 update for the Galaxy S3 for Verizon came a new bootloader with Samsung Knox enabled which is a secure boot designed to prevent booting unsigned code. It also is designed to prevent people from circumventing the secure boot by downgrading firmware. As a result you have tripped the Knox security flag and bricked your device. However take a look at this guide http://forum.xda-developers.com/showthread.php?t=2581166
that hopefully will allow you to unbrick your device.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Ive been having the problem since i rooted it via iroot on my phone.
its a note 4, SM-N910F. Ive tried many things to get it out of the loop for example hard reseting it via recovery mode but everytime i try it the page dosnt show up it goes to download mode and with an error saying couldnt boot normal mode.
ive tried to download stock firmware and flash it via odin but everytime i try that it gives me an error, i dont know if its the wrong firmware i downloaded or its the phone itself. on sammobile i couldnt find the firmware i was looking for because i live in australia and there is no international one available,if anyone could help me out it would be greatly appreciated.
This is the error message from Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention this but when i tried to fastboot it happened, that was the problem that caused it to go in a boot loop