Hey guys,
i really really need your help, i´m running out of ideas over here
A few days ago i installed crDroid 15.2 on my Galaxy S3 (amongst other things i chose the boeffla 3.10-beta2-Linaro-kernel and a modified SecPhone.apk during the installation with AromaInstaller). I did all the configurations and was pretty happy to eventually have found my perfect custom rom. AutoRecord, no-delay etc.: everything worked very well until i had to reboot my phone for some reason.
Problem was now that i couldn´t neither hear the caller nor the person i called (in fact there hasn´t even been a dialing signal before the connection was established, everything mute from start to the end) while they could hear me perfectly fine. Trying the speakers didn´t work, too.
Making calls with Skype worked, though, and every other "sound producing" app was able to do so. I also could hear the "call signals" (i have to translate here, in german it´s called "Anrufsignal"), but not the actual dialing signal. By call signals i mean the notification-sounds that you can set to know when the connection is established and closed again (there was a third signal, too, i think it was a beep every minute or so...).
Long story short:
I tried to reinstall with a new Kernel (non-Linaro, Stock XXEMB5), unmodified SecPhone.apk and another modem in different combinations, but that didn´t do it.
Even a hardreset (which included a system- and SdCard-wipe, so mobile was superclean) followed by a reinstall didn´t work, the problem persists. Phone works fine until first reboot.
Now i got back to a rooted stock rom (filename: I9300XXEMC2_I9300DBTEMC1_I9300XXEMC2_HOME.tar.md5) and experience no problems so far, but i really appreciated my (nearly) perfect custom rom and would prefer to use it as soon as possible
I already tried google and the search on this site, but it seems that nobody else ever had similar problems, so you are my last hope to make it work :/
Thanks a lot for your help
Related
So I recently just rooted my droid and I'm running the evileris firmware atm I'm really happy with everything except that my phone can no longer make phone calls. The sound during phone calls does not work and I think it may not work sometimes in the music player as well. It works when I plug in the headphones but when i take them out no sound.
Airplane mode and resetting do not fix this problem and the updates that I've tried flashing from [FIX] Audiofix. NEED TESTERS FOR NEW KERNEL in the Hero CDMA forum do not work either.
This phone worked fine before rooting and flashing and the problem is present on all the roms I've used. The update above simply hangs my phone at the bootscreen, no matter which one I use. (Maybe its written just for hero?)
Anyways I was hoping one of you guys could have a fix or maybe have also had this same problem? Thanks!
(from what I've read in the thread above it seems the issue is a bad kernel that hangs up or fails to reset so you have to do it manually, but resetting doesn't fix the issue for my. My problem is constant phone call audio loss)
UPDATE: I have done some more experimenting and it seems the only problem is from the in-cal speaker, because when I put speakerphone on it works fine. The problem lies with the front speaker (part that goes to your ear).
maybe your phone is broken?
I went back down to 1.5 root, works fine. Its an issue with 2.1 :/ So currently I have 2 nandroid backups, 1 of 1.5 and 1 of 2.1 so I'm just switching in between the two.
did you try....
Did you wipe before flashing? After flashing did you try *228 opt 1? This may help as it sorted my audio issues with another Rom.
im having this same problem and i have no clue why i have tried everything knows possible to fix this.
I wipe before each flash as well as each recovery haha. atm my setup is 2.1 evil eris for the weekends and 1.5root for the weekday when i actually need to make calls
*228 opt 1 did not work btw
I just make a new backup at the end of the week and recover to the other one, works like a dual-boot pc or a bootcamp mac. It works, but its getting kidna old I'd rather just have 2.1 for good haha.
Longtime lurker.....1st time poster....I just installed leak v2 (I was one of those that was too impatient to wait for root)...I had the same problem that everything worked fine except the phone had no in call sound. went through all the setting and found that TTY was set to full...I unchecked it and the sound came back. I know this may be simple...but it worked for me.
brianwin33 said:
longtime lurker.....1st time poster....i just installed leak v2 (i was one of those that was too impatient to wait for root)...i had the same problem that everything worked fine except the phone had no in call sound. Went through all the setting and found that tty was set to full...i unchecked it and the sound came back. I know this may be simple...but it worked for me.
Click to expand...
Click to collapse
yesss thank you this worked for me.
BrianWin33 said:
Longtime lurker.....1st time poster....I just installed leak v2 (I was one of those that was too impatient to wait for root)...I had the same problem that everything worked fine except the phone had no in call sound. went through all the setting and found that TTY was set to full...I unchecked it and the sound came back. I know this may be simple...but it worked for me.
Click to expand...
Click to collapse
I'm having the same problem... During a phone call, I get no sound / can't hear the person I am calling from the "internal speakers" (i.e. the one you hold to your ear during a call). If I switch to external speakers (i.e. loudspeakers) I can hear the person I'm calling...
What is this "TTY" setting that fixed this problem for you? Where can I find it and uncheck it?
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Ive got an unlocked Atrix too and now in Germany, I have the same problem. Motorola should definitely look into this.
Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working.
Thanks Nazrin (for both replies) !!
It sure did the trick, though no data access is not acceptable on a phone like this!!!
So this meens that all unlocked Atrix's in european GSM networks have the same problems? Haven't seen any others reporting this and there are quite a few in use I've noted in other forums.
Was thinking of trying to have mine replaced (which probably won't be easy and take long time...) but that won't change anything then??
We have to wait for the european version of Atrix rom I suppose??
Any others with the same problem??
No problems buddy, glad it worked..and i have to agree with you..this bug is unacceptable...it seems the phone just ***** up everytime it calls on utms (3g)...im sure there is more people with this problem...
Sent from my Supercharged MOTO ATX
I have the same problem
Hi guys, I have the same exact issue (I'm also in Belgium, on Mobistar). I'm somewhat glad to hear this is a generic issue, and not an issue with my specific phone. At least I can be fairly certain replacing it won't solve this issue then.
I made another post here before I came across this one, has a bit more info: we are seeing modem panics when using 3G + outbound call. I've also contacted Motorola support to no avail:
http://forum.xda-developers.com/showthread.php?t=1028771
You can also read there that I tried another operator, and it did not crash with that one (although 3G did disconnect).
Hopefully Motorola/Qualcomm will start to notice the bug when they release the phone globally, and release a fix.
Either that, or we all have phones from the same bad batch
This bug is really bad for users in europe....cant call on utms...
I really hope motorola takes this seriously cos if there's no fix via software updates then its moto gone for me
Guys, you are all on unlocked att atrix right? I do believe it is a simmiliar software glitch/bug/lock that you have porblems using it on non att networks as the problem with the wifi that it stops working for some of us (check the thread about it for more info). As all suggests there it is a config file problem, unfortunately i or anyone else doesnt know yet which one....
Yeah maybe..but funny thing is wifi is working without a glitch...will have to read that forum later...
Workaround options
So, since it seems we're not gonna get this fixed until there is a new radio/modem firmware available for flashing (and even then..), I've been looking for a workaround.
Found two potential applications that could do what we need: disable data completely when making an outgoing call, or switch to 2G:
- Sanity
- Superpower
I've tested the first (Sanity), and it does not work (fully). It does seem to disable data, but the bands aren't switched so our problem remains. I've contacted the developer here: http://tagliamonte.net/forum/thread-10.html. He seems to be very responsive, so given enough interest, I think he would add the functionality we require.
The second app I only came across today, and have not tried yet. It does not have a function to specifically switch bands when making an outgoing call, but it has a trigger for "Foreground application", so if we make that the dialer/contacts... Question remains if it will be able to do the switch.
Hopefully one of these will lead to a decent workaround for all of us!
Well done unknown...i will try these apps... but the real fix should be from moto...im always reading the net for anything that can solve this issue
reboots on incoming and outgoing calls
Same in Russia on Megafon network, I had to enter 4636 menu and use it as "GSM only". Even this does not fully solve problems, e.g. call forwarding does not show the new destination number while it does actually make the phone divert calls correctly.
My hope is that UK release will trigger new software version which will address this issue. ANYONE has news on this?
FIXED!
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
_unknown said:
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
Click to expand...
Click to collapse
Worked for me as well..brilliant!!!! its working here in germany.....but I wonder the telstra radio will work in my home country with frequencies of 900/2100
Motorola Atrix restart when placing a call
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
No answer
Why I never got an answer of any post I did?
There is something wrong?
Eli
elijacob said:
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
Click to expand...
Click to collapse
Forget about those ways
klingsurf said:
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Click to expand...
Click to collapse
[Sorry for problem in speaking]
i had that problem too , im using CM13 with Marshmallow Version of android
So . the easy way is :
***** search "Default" in settings. then choose " System dialer" as Default ! just it ****
but if there is no search bar in your setting . try this patch:
Android 6 : Setting/Apps then click the setting icon on top(may be diffrent in your case) , then Click on "default ...." then choose " System dialer" as Default! :fingers-crossed:
but in some cases that it didnt work . they have to reinstall gapps .
Or in official Roms , reset will be usefull
any quastions?
Recently my phone has decided that it will allow me to call other phones but it won't let me hear the other person or speak to them. Every other voice activated application works and as do the speakers, it is only during phone calls. I have tried resetting the phone but the problem persists. I was using Omega v26 and have recently upgraded to v27. Does anyone have a solution, or know where to find the thread that deals with this problem? I have had a look, but there is always the chance that i missed something.
I restored an Omega V13 backup and the problem seems to have disappeared. I still have no idea what went wrong. I'll try reflashing one of the jelly bean roms and see if the problem returns.
Hey, i am currently having the same problem. i could hear the other person, but they cant hear me, and sometimes i cant hear them as well. but other voice apps such as viber and skype both can work. i recently tried to install Ressurection Remix but failed to boot, then i restored to the backup i put in place before. any help?
Hey guys, i'm new as far as posting on the forum is, but i have been flashing ROMs for quite a while now. Now, i have a peculiar problem that should probably be shared on Omega ROM thread, but as a newbie i can't post there, so i'll try here...
I started having problems as soon as i flashed Omega 50.1, when in call, and putting that person on the speaker, as i often like to do. Usually, it doesn't take more then 20 seconds to lose the connection, and both me and the called person get the squelchy noise. Now, when i flash the ROM it works perfectly, so i figured it had to be a Modem, one of Mods i'm using, or perhaps the Moto theme. After flashing (full wipe) several modems and Moto theme, everything was fine. Moving on, as I use a few Mods that can be downloaded for the ROM, and after installing and testing each and every one of them, it seems that when i install Modded Camera 1.52 the problem with speaker noise comes to life. So when modded camera installed, you can't put a caller or a person you called on a speaker without losing the connection and getting weird noise out of speakers.
Having this in mind, can someone try to replicate the problem, cause to me it really seems it might be a bug.
Mitrandir011 said:
Hey guys, i'm new as far as posting on the forum is, but i have been flashing ROMs for quite a while now. Now, i have a peculiar problem that should probably be shared on Omega ROM thread, but as a newbie i can't post there, so i'll try here...
I started having problems as soon as i flashed Omega 50.1, when in call, and putting that person on the speaker, as i often like to do. Usually, it doesn't take more then 20 seconds to lose the connection, and both me and the called person get the squelchy noise. Now, when i flash the ROM it works perfectly, so i figured it had to be a Modem, one of Mods i'm using, or perhaps the Moto theme. After flashing (full wipe) several modems and Moto theme, everything was fine. Moving on, as I use a few Mods that can be downloaded for the ROM, and after installing and testing each and every one of them, it seems that when i install Modded Camera 1.52 the problem with speaker noise comes to life. So when modded camera installed, you can't put a caller or a person you called on a speaker without losing the connection and getting weird noise out of speakers.
Having this in mind, can someone try to replicate the problem, cause to me it really seems it might be a bug.
Click to expand...
Click to collapse
first thing never flash more than one mod at a time. Always reboot when you flash any mod. Now what you have to take out the camera.apk from the omega rom zip file and put it in your preload/symlink/system/app by replacing the modded camera then set oermission and reboot. Hope it works otherwise reflash the rom again.
Good luck
Hi guys, I'm only starting this thread because I searched over 50 pages and tried different methods already.
After my Xperia Z3C decided to have major issues on the screen, I decided to go back to my SIII while I try to fix the Z3.
My S3 is still running perfectly under cm-11, the only problem is that I can't connect any calls, if I try to make a call both phones rings normally, but when the person answers the phone (or the other way around) the connection goes mute, no sound at all. After I hang up the call the SIII loses the networks for a couple of seconds and then it comes back up.
Viber and Skype works, messaging works, 3G Mobile Data connection works with no problem, and the phone only loses signal when I place or receive the calls.
I upgraded from cm-11-20150901-SNAPSHOT to cm-11-20160115-SNAPSHOT, installed a new modem, checked APN configuration and IMEI, the only thing left to do is to Odin flash back to stock android, and actually I don't want to do that, I love cm since the day I installed.
One thing to notice is that the SIII worked for quite some time with cm-11 without presenting this problem.
What else can I do? Thank you very much in advance.
Can no one help me?