Here's my story about 5 months ago I root and flash to new rom I believe it was bionix-v-tw-voodoo because I got tired of it, I tired to flash a new rom however, whenever I tired to flash the new rom I kept getting this error message Data wipe fail Then I tired to use Odin to fix it but once it get pass the Vibrant screen the phone goes black.The only thing that works it Eugenes
I tired this method but no go
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
I have the same issue(exact) i brick my t959 using cwm sd card partition,im running biffmod v 1.3 (2.2) works fine but when i try boot recovery give errors in md5sums,i try flash bionix...not work,i try flash another rom 2.2 ...not work,only biffmod,heimdall not works for me. Any suggestion....
Sent from my SGH-T999 using xda app-developers app
I see juankyhd2, hopefully someone help us with problem
http://forum.xda-developers.com/showpost.php?p=10926662&postcount=4
eureca...i fix my t959!!! read this post,need stock t959 .tar and .pit,eugene .tar and pit,im use odin 1.85(for vibrant)Voodoo-stable-5.2-Froyo-2.2.1-GT-I9000-odin-pda ,1-flash eugene and pit via odin(download mode)wait for reboot.
2-disconect phone from pda and reset odin
3-on odin press pda and search*Voodoo-stable-5.2-Froyo-2.2.1-GT-I9000-odin-pda* and start
4-i9000 logo start with no audio,wait for phone is on.
5-boot in recovery mode with 3 buttons,red recovery appears(buttons are crazy up n down,dont worry)
6-disable VODOO LAGFIX and reboot
7-reset odin and put on t959 stock .tar and .pit,boot on download mode.
8-wait for reset,when download mode gone you see one error but dont worry.
9-enjoy t959 stock and never do sd partition without disable vodoo lagfix first!
Sent from my SGH-T959 using xda app-developers app
Thanks to juankyhd2 for finding a way to fix my phone
Here's the link http://forum.xda-developers.com/showthread.php?t=2229899
Does anyone have the Eugene files anymore? I can't find them hosted anywhere online.
Thanks
EDIT: FOUND IT! Under 2.2
http://forum.xda-developers.com/showthread.php?t=1875966
Sent from my SGH-T959 using xda app-developers app
Related
i flashed clockwork recovery and then kings kernel then when i reboot it goes to the big s then the screen turn black
i tried wiping all the user data and cache and it still does the same thing?
can i get out of this situation or am i bricked for life i justgot my vibrant today!
How long did you let it sit on the black screen for? That has happened to me before but after a few minutes it booted with no issues. Good news is your not bricked for life.
it is till on the black screen i try to flash jacs kernel and halfwy it stop and automatically goes to the main clockwork recovery menu?
i tried using odin but it wont recognize my phone even after i put it in download mode
If your running ji6 you have to flash kernel back support first then the custom kernel or you will get stuck at vib screen.
Bionix Final w/JACs UV/0C
okay i flashed stock ji6 with odin and now it is still stuck at the Big S screen
Take the battery and sim card out then odin back to ji6. After that if you want a custom kernel for ji6.first down load the kernel back support zip, then the custom kernel zip. Go into clockwork recovery flash kernel back support then flash custom kernel then reboot.
Bionix Final w/JACs UV/0C
i dont want the kernel all i am saying is that i have already went back ji6 3 times and it always gets stuck at big s screen
Alanrocks15 said:
i dont want the kernel all i am saying is that i have already went back ji6 3 times and it always gets stuck at big s screen
Click to expand...
Click to collapse
Hey noob just flash eugenes froyo!
lol i remember i returned the vibrant and got a new one because i didnt know what eugenes froyo was
seems to happen to ya a lot. Just saying.
You will need to do this:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
oka1 said:
You will need to do this:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
Click to expand...
Click to collapse
If only you were here on october
I was so scared I thought I bricked and since I was new to odin I didn't know how to use. People told me to use kernel back suport and stuff
What would've happened if there was no eugenes froyo? It would just keep getting stuck on galaxy s screen even if going to stock
Sent from my SGH-T959 using XDA Premium App
Alright, here's the breakdown.
-I was on 2.1 Bionix Final R1
-Tried flashing beta 4 voodoo 2.1 kernel while on OCLF.
- wouldn't boot
-tried to ODIN
-Odin failed becuase i got Data Wipe Failed
-Tried the ODin that doesn't brick, didn't work, got into recovery there, and got stuck,
-tried odining the JFD after this...failed.
What do? I need my phone badly, i keep getting "Data Wiped Failed" and black screen at boot, i can get into recovery but nothing i do works...
Open odin. ALWAYS OPEN IT FIRST. Take out battery, plug into Odin, hold down volume rockers and power. Without letting go of these buttons, put the battery back in. Your phone should show up on Odin and you should be able to revert back to stock
Sent from Bionix powered vibrant! If I helped, hit the thanks button!
Try odining again, but load the 512 pit file and try checking the repartition box on the left of the screen.
Sent from my SGH-T959 using XDA App
treyvaporizer said:
Open odin. ALWAYS OPEN IT FIRST. Take out battery, plug into Odin, hold down volume rockers and power. Without letting go of these buttons, put the battery back in. Your phone should show up on Odin and you should be able to revert back to stock
Sent from Bionix powered vibrant! If I helped, hit the thanks button!
Click to expand...
Click to collapse
This is correct, if the phone doesn't go into recovery. If it can Then:
1. Odin 1.3 or higher I use 1.7 but not real important
2. Download original Vibrant rom
3. You will need the .pit file (this is for mapping) Try using the 831 pit file if 512 is not working for you
4. you will Eugene froyo that does not brick rom.
The order is as follows:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! You will have flashed back to the original software. From there, you can do anything,
The sbl could be an issue but this should get around that problem if not then may need to use adb .
Just make sure to remove sim and sd card if you havent all ready i would get the same error when i had those two still in my phone.
please check repartition first option to check from left an dall the other two options => also two more options below like clear cms
i cant recover with odin
getting data wipe failed and file missing errors
is there a place to learn about adb
i read i could push the disable voodoo folder i think its my last hope
ill make a custom boot animation to your specs if you can get this phone back up its my girls it just shut down on her at work it was running then pooop!
it would only make it to the dragon kernel splash screen.
http://www.youtube.com/watch?v=GYNUgYlg5IA&feature=fvsr
this is what i got
Have you tried Heimdall 1.1 It is like Odin and some eho have had this problem found this would work for them
If not maybe try this, but here is the basic way to do what you are asking
You will need the disable voodoo folder, if it is not on your internal sd card
First
1. Download update.zip if you do not have it on the internal sd-card
2. Place the update.zip in tools folder so you can push it into your phone by using adb command
3. Plug usb into the phone and your phone should be on the Android system recovery <2e>
4. Use your volume button to select reinstall package, don't press power button yet.
5. constant "adb push update.zip /sdcard" from computer , you will get permission denied.
6. While you are constantly pushing the adb command from computer. press the power button on the phone so it install update.zip from sdcard.
7. This is the part where it force adb push into sdcard without permission
8. once the update.zip install completed. unplug the usb cable from the phone and take the battery out.
9. put the battery back to the phone then press on both volume button.
10. While holding both volume button , plug in your usb cable and it will boot to download screen.
If you need use Odin to flash your phone to original stock rom.
If this gets you going cool but if you run into problems see below:
If you get black screen with only 4 light on the bottom after flashing from Odin.
Follow http://forum.xda-developers.com/showthread.php?t=728698
There should be T959-PDA.tar,T959-CSC.tar and T959-Phone.tar within the package.
Check "Re-Partition" , "Auto Reboot" and "F.Reset Time" check box. Use the PIT 0512 version. Use "PDA", "PHONE" and "CSC" from the link above.
After flashing with Odin, you will loose the download mode. repeat the first part and you are good to go.
Hope this helps
You can try this.
Download the android sdk
Extract to a place on your desktop
Call it android or something easy to type in.
Put a folder with the disable lagfix folder in it
In command type cd desktop/android/tools
Boot normally
Keep typing adb devices till your phone shows up
Once it does type in
Adb push (file name here)SPACE/sdcard
If it succeeds reboot and it should disable lagfix
Sent from my SGH-T959 using Tapatalk
ill be trying these thanks so very much sucks to brick like this never been this bad b4
got black screen with led on bottom all litlol
Try odin restore repartition not checked and flash jfd
Sent from my SGH-T959 using Tapatalk
I've had the dreaded Data Wiped error before... Well to fix this you might lose all your internal sd card data.
I almost positive this should work:
1. Go here:
http://forum.cyanogenmod.com/topic/15275-gt-i9000-cyanogenmod-7-we-love-bugs-version-20110205/
and download one of the i9000 .tar files, this will soft brick your phone but restore your data. Then you can odin back to stock here:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
However, this has worked for me, I don't guarantee the results, but it seems you're already fu*cked so might as well.
If that doesn't work ODIN "Eugene's Froyo that doesn't brick" then when you're in recovery Odin using the link above...
EDIT: The .tar file you need is located in the initial package so you must download that... or you can find any other i9000 .tar file and try that... it should work.
Actually odin uvjfd with pit512 and requisition checked. you will be back to stock. see vibrant bricked under Q&A you will find detail how to restore.
Sent from my SGH-T959 using XDA App
Requisition=repartition
Dame auto correct on Swipe junk
Sent from my SGH-T959 using XDA App
Tried all but the i9000 tar now I can't get odin to even see the phone no yellow com
Sent from my SGH-T959 using XDA App
bobbbb said:
I've had the dreaded Data Wiped error before... Well to fix this you might lose all your internal sd card data.
I almost positive this should work:
1. Go here:
http://forum.cyanogenmod.com/topic/15275-gt-i9000-cyanogenmod-7-we-love-bugs-version-20110205/
and download one of the i9000 .tar files, this will soft brick your phone but restore your data. Then you can odin back to stock here:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
However, this has worked for me, I don't guarantee the results, but it seems you're already fu*cked so might as well.
If that doesn't work ODIN "Eugene's Froyo that doesn't brick" then when you're in recovery Odin using the link above...
EDIT: The .tar file you need is located in the initial package so you must download that... or you can find any other i9000 .tar file and try that... it should work.
Click to expand...
Click to collapse
did not work but thanks data wipe error sucks!
If you can't even get to download mode, I'd love to take a look at it. I offer JTAG debricking as you can see in my signature. You owe me nothing but shipping ($10) if I can't do anything for you.
Check out the link in the signature...
constant adb push ? so keep typing the command over and over?
(Not sure if i posted in the right section before, im really worked up. Ive been flashing roms for months, and i just cant believe this happened)
Ok, so before, I went to install the Simple Galaxy rom, and i forgot to disable VooDoo .. When I boot my phone, its tied together between the stock Samsung Galaxy X screen and the Auxura Rom (which i am came from + with the honeybread port)... I know im only soft bricked, so at least i know i can SOMEHOW fix this.. I can get into download mode and recovery, but when i got to recovery and choose install ZIP from Sd card, it tells me nothing is there. I tried factory reseting it,..Can ANYONE help me with this. Please guys, Im in BIG need of help..
Edit- I got Odin to work, Im going to see what happens next
If you can get into download mode and can use ODIN, why not just go back to stock and do everything over again?
Here is all you will need get these files
Eugenes froyo that does not brick
512 pit file
Stock JFD rom
Odin 1.70 or higher
Then follow this :
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
doing this method will get everything back to normal and the phone will work just like it did right out of the box
Hope you get it going
I had something similar happen, now I can get out of recovery mode (it says
Code:
[LEFT]update media, please wait
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.[/LEFT]
)
I tried reinstalling Foryo stock (KA6) still didn't work.
What is the difference between KA6 and JFD?
JFD = 2.1 - Elcair
KA6 - 2.2 - Froyo
I would odin back to stock 2.1 (JFD) has always worked for me.
You might need to odin using the "repartition" checked...
I accidently flashed wrong kernel this one:
http://forum.xda-developers.com/showthread.php?t=982148
while i was on stock rom with stock kernel!
how can i go back! :S
i can get into CWM Recovery, but cant flash anything. Im on clockwork mod 3.0.0.5 now!
what can i do?
Need to fix it urgently!
For future reference you can only use CM7 kernels with CM7 roms. Your going to have to Odin back to stock kernel. In CM7 you can only get into download mode with 3 buttom method. Im assuming you know how to Odin?
i did reflash using odin, but now the phone turn on and i see the tmobile screen, followed by the samsung animation, the s, after which the screen turns blank. the touch sensitive buttons respond, i can see the light change as i touch them, but i see no difference on the screen. what should i do?
Do this,
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
doing this method will get everything back to normal and the phone will work just like it did right out of the box
This will get you back to stock
Good luck