Hi I'm BrianXYap New to XDA. So I recently just rooted my Sk17i but didn't unlock boot loader. I was trying to install cm10 on my Sk17i.It obviously failed so I gave up. (Using CWM) when I clicked reboot system, I was stuck at the Sony Ericsson logo . I tried to Go to the recovery mode or any other modes but they don't work. Can You DEV's Help me? also when I plug it in to my computer it doesn't charge for some reason. there is also no LED notification light, is it because of the failed Flash caused all these things to happen? Help!
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
an0nym0us_ said:
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
Click to expand...
Click to collapse
heres links - http://forum.xda-developers.com/showthread.php?t=1568792
Flashtool method
Download the correct firmware file for your phone at the bottom of the post.
Make sure Flashtool is installed.
Place downloaded firmware file(.ftf format) in Flashtool\firmwares(by default C:\Program Files\Flashtool) folder.
Start Flashtool.
Click the lightning button and choose Flashmode.
Firmware should appear there, if you have it in correct folder. Choose it.
Turn off your phone, connect USB cable to computer, then press Volume Down button and connect USB cable to your phone.
Flashtool should detect your phone and starts flashing. Follow the instructions.
When it says „Flashing completed“, unplug your phone and turn it on.
Click to expand...
Click to collapse
THe Problem is I can't do volume down combination. It still stucks at the logo
Uninstall everything on the PC related to your Phone then start from scratch.
Sent from Myushi
BrianXYap said:
THe Problem is I can't do volume down combination. It still stucks at the logo
Click to expand...
Click to collapse
What volume combination and stuck at the logo mean? You do flashing firmware via flashtool with device off.
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Be sure that the phone is off then plug the usb cabl and hold volum down key in the same time and your in flash mod then open flashtool and see videos on youtube on how to flash ftf files using flashtool and that should be over
Sent from my SK17i using xda app-developers app
BrianXYap said:
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Click to expand...
Click to collapse
do you really want a cm10 rom? then unlock your bootloader (but be mindful that you may lose your warrant and bad things might happen to your phone) here's the tut http://forum.xda-developers.com/showthread.php?t=1879750
after you unlock your bootloader
flash your kernel through flashtool
then install cm10 rom
but if you want to go back to your stock rom
you need flashtool and obviously your stock rom (ftf file)
click the lightning-like button then choose flashmode
select the rom then you'll be prompted to connect your phone
hold the power button and volume down button at the same time until the led light is blue.
wait to complete and your back to your original rom
i hope it helped you
Related
My phone was working, I had MiniCM7Pro V21 Installed and I tried to install the CWM Recovery Version 5, because in my installed version the Battery Stats Wipe wasn't working and my battery was draining very quickly.
After the CWM Recovery Version 5 Installation my phone got bricked because it's getting stuck in Sony Ericsson Text.
I am trying to Reflash but only Flash button is active and it doesn't show any firmware though I have copied both zip and unzipped files in firmware folder in FlashTool_0.2.9.1
I tried to use SuperOneClick to root but it gets stuck in Waiting for device. Kindly help.
It gives the following error :-
OK
Pushing rageagainstthecage...
error: device not found
FAILED
I have installed it.
ggsetup-2.2.0.10
Press home+power button until you see black screen, then immediately press and hold back button plugging your phone into computer. When you see black screen and green flashlight-> your phone is correctly booted into restore mode. From this mod, you can restore your phone, using SE restore tools: SEUS and Sony Ericsson Pc Companion, or flash stock kernel using flashtool.
P.S. If you wont see black screen and green flashlight for the first time, try it again, again until you putt your phone safely into restore mode.
Thank you for the reply, the black screen do u mean the black screen with Sony Ericsson Text ? When I Press Home+Power Button I can see the Sony Ericsson Text Black Screen and then I press and hold the back buton Pluging my phone into computer I keep on seeing the Sony Ericsson Text Black Screen with no green flashlight.
I am still trying.
Black screen without any logos. Just black screen. Don't forget to hold back button.
Doing that, but it still gets into Sony Ericsson Text Screen, I press home and the power button, black screen for a while and I press back button and try to connect the phone the Sony Ericsson logo appears.
But When the cable connected and back button pressed the I can see the charging image and green light flash.
and in Flasher it shows the following :-
07/007/2012 23:07:36 - INFO - Device connected with USB debugging off
07/007/2012 23:07:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
camelgrg said:
Doing that, but it still gets into Sony Ericsson Text Screen, I press home and the power button, black screen for a while and I press back button and try to connect the phone the Sony Ericsson logo appears.
But When the cable connected and back button pressed the I can see the charging image and green light flash.
and in Flasher it shows the following :-
07/007/2012 23:07:36 - INFO - Device connected with USB debugging off
07/007/2012 23:07:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
reflash to stock kernel and ROM
- install PC companion.
- connect phone in repair mode
- install drivers.
- after driver installed, reflash stock kernel using flashtool
- after stock kernel installed, reflash stock ROM using PC companion
- after stock kernel and ROM flashed,your phone should be like just when you bought it.
- bootloader should be locked now
- Root again
- unlock bootloader again
- Flash nAa again
- Flash cm7 again
- DONE!
Thank you for your reply, I have PC Companion Installed, I have a Generic Firmware downloaded, I have no idea what a stock kernel is ?
I am not able to get into this repair mode, I think this mode is when the flash light flashes ?
from the Bootloader part, I think I can do it because I did it before following a tutorial. If you can lease help me with the prior stage to bootloader lock would be highly grateful.
Thank u
Ones again: to enter restore mode you have to power off your phone, using home+power buttons or powering off like I have on picture. Then press and hold back button, while plugging it into computer.
camelgrg said:
Thank you for your reply, I have PC Companion Installed, I have a Generic Firmware downloaded, I have no idea what a stock kernel is ?
I am not able to get into this repair mode, I think this mode is when the flash light flashes ?
from the Bootloader part, I think I can do it because I did it before following a tutorial. If you can lease help me with the prior stage to bootloader lock would be highly grateful.
Thank u
Click to expand...
Click to collapse
- To relock bootloader you need to flash stock kernel which is 2.1.0.a.06 kernel.
- You need to flash stock kernel because if you have nAa kernel or any custom kernel installed, you wont be able to repair your phone using pc companion.
- After flashing stock kernel:
1. open pc companion
2. click support zone. (click start below it)
3. after clicking start, there should be a new window which also has a "start button"
4. on the 2nd start button, there should be a button under it which says "repair"
5. after clicking repair, just follow the steps for you to connect your phone in repair mode.
6. complete the repair installation.
7. DONE!
8. Bootloader should be locked now.
Thank you I was able to restore through PC Companion by getting into repair mode, however I didn't use flashtool to flash prior to usin PC Companion.
Thank you both for your kind support, Highly appreciated.
camelgrg said:
Thank you I was able to restore through PC Companion by getting into repair mode, however I didn't use flashtool to flash prior to usin PC Companion.
Thank you both for your kind support, Highly appreciated.
Click to expand...
Click to collapse
You are welcome my friend
And how should I proceed if I have a really hard brick (u20a)?
I tried to flash nAn on it, followed some instructions to unlock the bootloader, but something went wrong, the results were not the ones that should had been, and I made the mistake of turning it off. Now whenever I try to power it on, it doesn't do squat.
The only thing that makes me think it's still alive is that (after several months) I plugged it in and it began blinking on red (perhaps really low battery).
I've tried to pull the battery, put it back in, press back (keeping it pressed), and then plugging the cable to the computer and nothing.
Any ideas? Or should I flush it down the toilet? :crying:
x10 mini unbricking
Mrakoris/ said:
Press home+power button until you see black screen, then immediately press and hold back button plugging your phone into computer. When you see black screen and green flashlight-> your phone is correctly booted into restore mode. From this mod, you can restore your phone, using SE restore tools: SEUS and Sony Ericsson Pc Companion, or flash stock kernel using flashtool.
P.S. If you wont see black screen and green flashlight for the first time, try it again, again until you putt your phone safely into restore mode.
Click to expand...
Click to collapse
i tried the thing you suggested, but the green light only lasts a while even if i continue to hold the back button. also, i am not able to repair my phone through se pc companion, as it keeps cancelling the repair update the moment the green light stops appearing. any help? thanks!
Hi,
I have the SE X10i, one day i tried to power it on and it showed the 3 flash red light, so i charge the battery and then tried to power on the phone.
The phone vibrate once and nothing going up, the screen stay black, no light at the keys.
I tried to install new rom via SERUS, it fails.
tried install via flashtool and it stuck on flashing loader.
As i understand from the flashtool the phone can get into flashmode.(back key and insert the usb cable).
Any help please how to wake up this phone alive.
Thanks.
wo88les said:
In flashtool select the Rom you want to flash
Remove battery
Insert USB cable
When software asks you to press back, hold back while putting battery back in, should go straight to flash mode and flash
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
Also try downloading another stock Rom, maybe the one you have has became corrupted?
Hope that helps if not, you may need a more senior member to help
Sent from my Xperia X10 using xda premium
pumemule said:
Hi,
I have the SE X10i, one day i tried to power it on and it showed the 3 flash red light, so i charge the battery and then tried to power on the phone.
The phone vibrate once and nothing going up, the screen stay black, no light at the keys.
I tried to install new rom via SERUS, it fails.
tried install via flashtool and it stuck on flashing loader.
As i understand from the flashtool the phone can get into flashmode.(back key and insert the usb cable).
Any help please how to wake up this phone alive.
Thanks.
Click to expand...
Click to collapse
Hey pumemule,
Turn off phone or take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash
Wait for pop up message
Connect your phone
Hola BACK button
Re-insert the battery
check this video to show you how to put on flashmode Xperia X10 on flashmode
You can check any for any stock ROM on android development
Hope that helps
Regards
First download the stock ftf file from the below link
http://forum.xda-developers.com/showthread.php?t=1749426
Turn off phone and take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash (stock Rom)
hold back button
Re-insert the battery
Connect your phone
a green led will appear.....
then the work is done......
restart your phone
It helped me a lot...
and many people
hi.
i tried to flash boot.img from cm9.1 topic with se bootloader unlock tools.
but when i did this my phon was bricked.
when i try to turn it on it wasnt work.
when i hold down VOL+ power it vibrate but nothing changed.
and after 8 hour i cand use Vol + power too.
nothing happening.
when connect my phone to charger o usb cable. led turning on red.
but nothing else happening.
i see another post about this problem , some guys told to go fastboot and ...
but i cant go to fastboot or flash mode.
another way plz.
so sorry for my bad english.
Flashing at flashtool
Sent from my Xperia P using xda app-developers app
Wrond forum, it should be in Q&A. If you can enter flash mode flash with flash tool (find fw around this forum). Try changing the kernel to stock with adb command (not that tool you are using) fastboot flash boot (name of the kernel). Charge it for an hour and see what happens. Post the flash tool log here.
copper62472 said:
hi.
i tried to flash boot.img from cm9.1 topic with se bootloader unlock tools.
but when i did this my phon is bricked.
when i try to turn it on it wasnt work.
when i hold down VOL+ power it vibrate but nothing changed.
and after 8 hour i cand use Vol + power too.
nothing happening.
when connect my phone to charger o usb cable. led turning on red.
but nothing else happening.
i see another post about this problem , some guys told to go fastboot and ...
but i cant go to fastboot or flash mode.
another way plz.
so sorry for my bad english.
Click to expand...
Click to collapse
Flash the boot.img from the CM9.1 zip file (fastboot flash boot boot.img). Then reboot into recovery by holding the power and vol+ buttons until the phone vibrates 3 times, then boot (power button) and press vol+ when the button lights come on.
Then follow the instructions given before by DavidMKD.
tbschommer said:
Flash the boot.img from the CM9.1 zip file (fastboot flash boot boot.img). Then reboot into recovery by holding the power and vol+ buttons until the phone vibrates 3 times, then boot (power button) and press vol+ when the button lights come on.
Then follow the instructions given before by DavidMKD.
Click to expand...
Click to collapse
DavidMKD said:
Wrond forum, it should be in Q&A. If you can enter flash mode flash with flash tool (find fw around this forum). Try changing the kernel to stock with adb command (not that tool you are using) fastboot flash boot (name of the kernel). Charge it for an hour and see what happens. Post the flash tool log here.
Click to expand...
Click to collapse
dimon2242 said:
Flashing at flashtool
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
when i cant go to flashmode or fast boot , how can i flash kernel or boot.img or another file?
is there any way?
i connected charger red led in on but doesnt charge.( not gone hot)
no change at all.
sorry my bad english
copper62472 said:
when i cant go to flashboot or fast boot , how can i flash kernel or boot.img or another file?
is there any way?
i connected charger red led in on but doesnt charge.( not gone hot)
no change at all.
sorry my bad english
Click to expand...
Click to collapse
For flashtool need flashmode (not fastboot)!
Connected with PC (with started flashtool) with hold in button Vol-
dimon2242 said:
For flashtool need flashmode (not fastboot)!
Connected with PC (with started flashtool) with hold in button Vol-
Click to expand...
Click to collapse
flashmode doesnt work too :crying:
copper62472 said:
flashmode doesnt work too :crying:
Click to expand...
Click to collapse
Exactly flashtool already is started and flashmode drivers is installed?
Thread moved to the Q & A section, post in the relevant section next time.
copper62472 said:
flashmode doesnt work too :crying:
Click to expand...
Click to collapse
as far as i know, if the phone turn on any led, is still alive, try using flashtool and the original .tft, go for it in the P Development Section, download the 6.1.B.0.544 (Generic Version) and try to flash it, it might work, but you need to know this, if you flash it, you can void the warranty of the operator and if you unlocked the bootloader sony can't repair it (warranty void too) (i remember this was in the ToS of the bootloader unlock web)
Good luck.
(Sorry for my bad english.)
dimon2242 said:
Exactly flashtool already is started and flashmode drivers is installed?
Click to expand...
Click to collapse
of course the driver is installed .
problem isnt from my PC just on phone.
and isnt any way to go flashmode and fasboot.
please dont tell me again to flash anything.
i cant flash anyway.
blaazeer said:
as far as i know, if the phone turn on any led, is still alive, try using flashtool and the original .tft, go for it in the P Development Section, download the 6.1.B.0.544 (Generic Version) and try to flash it, it might work, but you need to know this, if you flash it, you can void the warranty of the operator and if you unlocked the bootloader sony can't repair it (warranty void too) (i remember this was in the ToS of the bootloader unlock web)
Good luck.
(Sorry for my bad english.)
Click to expand...
Click to collapse
thanks
then its alive.
maybe run out of battery .
but i cant remove it.( of course you know)
copper62472 said:
thanks
then its alive.
maybe run out of battery .
but i cant remove it.( of course you know)
Click to expand...
Click to collapse
do this, plug in the charger and let it charge (about 3 hours) and try to turn it on, if its a kernel problem, at least the phone try to boot up or turn on the backlight and get freezed, it's a OS/Kernel problem, but the question is, did you flash the correct kernel on it? remember the codename for xperia p is NYPON, inside the flashtool folders are the fastboot.exe, try to flashing a advanced kernel (the one made by DoomLoRD) and check for the phone, if it boot up until the xperia logo, everything is ok.
blaazeer said:
do this, plug in the charger and let it charge (about 3 hours) and try to turn it on, if its a kernel problem, at least the phone try to boot up or turn on the backlight and get freezed, it's a OS/Kernel problem, but the question is, did you flash the correct kernel on it? remember the codename for xperia p is NYPON, inside the flashtool folders are the fastboot.exe, try to flashing a advanced kernel (the one made by DoomLoRD) and check for the phone, if it boot up until the xperia logo, everything is ok.
Click to expand...
Click to collapse
oh no. i downloaded wrong file. and flashed (flashed only boot.img).
i used hikary
what can i do know?
blaazeer said:
do this, plug in the charger and let it charge (about 3 hours) and try to turn it on, if its a kernel problem, at least the phone try to boot up or turn on the backlight and get freezed, it's a OS/Kernel problem, but the question is, did you flash the correct kernel on it? remember the codename for xperia p is NYPON, inside the flashtool folders are the fastboot.exe, try to flashing a advanced kernel (the one made by DoomLoRD) and check for the phone, if it boot up until the xperia logo, everything is ok.
Click to expand...
Click to collapse
i tried to charge it about 30 min .
but my phone is cold yet. ( when i charging it should be warm.)
also its led just when i plug usb gone on.
i think itnt charging
how can i remove battery from my phone?
copper62472 said:
oh no. i downloaded wrong file. and flashed (flashed only boot.img).
i used hikary
what can i do know?
Click to expand...
Click to collapse
First, don't panic.
i made the same mistake when i flashed the first kernel, i think i messed up everything and... i recovered my phone xD
flash this kernel and hope the best, the instructions are in the post.
http://forum.xda-developers.com/showthread.php?t=1716966
first of all dont worry just know that when u press all the three buttons at the same time it reboots and when u still keep them pressed it shuts off completely
i have an xperia p and had the same problem
what u have to do is rlly simple
first unzip the kernel (boot.img) from the fxp144_cm9.1 zip file
now copy this file into the folder in android sdk/tools or platform-tools (basically any folder with the fastboot.exe )
hope u have installed fastboot drivers
now switch off ur fone completely
and then connect ur fone in fastboot mode by pressing the vol up key and connecting the usb
(hope it goes into fastboot mode)
run this command in cmd in the folder containing the fastboot.exe
fastboot flash boot boot.img
this flashes the kernel
using falshtools u can either flash the zip file or u can do it through recovery if its alread in ur sd card
do it twice bcoz the firs time it flashes the kernel
if none works switch of ur fone completely, press the vol down button and connect the usb
this puts the phone in flash mode and u can flash ftf files of stock roms
all the best
P.S all this will work if u have an unlocked bootloader by the method giiven on sony's official site
blaazeer said:
First, don't panic.
i made the same mistake when i flashed the first kernel, i think i messed up everything and... i recovered my phone xD
flash this kernel and hope the best, the instructions are in the post.
http://forum.xda-developers.com/showthread.php?t=1716966
Click to expand...
Click to collapse
dhireshmehta said:
first of all dont worry just know that when u press all the three buttons at the same time it reboots and when u still keep them pressed it shuts off completely
i have an xperia p and had the same problem
what u have to do is rlly simple
first unzip the kernel (boot.img) from the fxp144_cm9.1 zip file
now copy this file into the folder in android sdk/tools or platform-tools (basically any folder with the fastboot.exe )
hope u have installed fastboot drivers
now switch off ur fone completely
and then connect ur fone in fastboot mode by pressing the vol up key and connecting the usb
(hope it goes into fastboot mode)
run this command in cmd in the folder containing the fastboot.exe
fastboot flash boot boot.img
this flashes the kernel
using falshtools u can either flash the zip file or u can do it through recovery if its alread in ur sd card
do it twice bcoz the firs time it flashes the kernel
if none works switch of ur fone completely, press the vol down button and connect the usb
this puts the phone in flash mode and u can flash ftf files of stock roms
all the best
P.S all this will work if u have an unlocked bootloader by the method giiven on sony's official site
Click to expand...
Click to collapse
i thing my phone is discharged. cant turn it on.
and cant charge too
keep the phone charging, the led doen't matter as far as i know.
last option is going to a sony service or something like that.
i think you should try to remove battery first. i used this method to recover my p. i opened the back cover and removed the battery for a few minutes and then did nothing but connected it in fastboot and flashed the correct kernel.
to remove back cover you have to remove two screws at the both sides and two under the bar over the camera. just remove the top plastic cover and you will be able to access the screws. then just remove the battery connector for a few minutes reconnect it and try flashing kernel again. i wish it also work for you bro. good luck. :good:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
melvinpetix said:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
Click to expand...
Click to collapse
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
mirost1 said:
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
Click to expand...
Click to collapse
I've tried connecting sola to PC but it seems like flashtool can't detect it. Is there other way to connect it to PC so flashtool can detect the device? I already downloaded stock firmware
Still no luck
1) Hold power + vol up until you feel the phone vibrates 3 times.
Quickly hold power down, and shove the USB wire in.
It should detect your phone in flashboot now.
2) Alternatively, after the phone vibrates 3 times, keep a hold on vol up to get it into fastboot. Then flash the correct kernel for the rom you have.
Note that ICS, GB and CM roms all use a different kernel. Make sure you have the right one.
3) Lastly, if your phone's bootloader is still locked, you can just repair using SUS.
please help!
i was flashing the official pacman rom for xperia u. then i connected my phone to the computer to fastboot the cm kernel.
but the flashtool says that drivers need to be installed. i have installed the drivers but the problem still persists.
i tried to goto the cwm but after i keep pressing the vol down button, the led flashes but nothing comes. its a black screen.
now i'm not able to do anything to the phone not even abble to flash stock ftf!
Please help!
vinayakagarwal1996 said:
please help!
i was flashing the official pacman rom for xperia u. then i connected my phone to the computer to fastboot the cm kernel.
but the flashtool says that drivers need to be installed. i have installed the drivers but the problem still persists.
i tried to goto the cwm but after i keep pressing the vol down button, the led flashes but nothing comes. its a black screen.
now i'm not able to do anything to the phone not even abble to flash stock ftf!
Please help!
Click to expand...
Click to collapse
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
ChikeD said:
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
Click to expand...
Click to collapse
Or remove the battery you may need to open pc device manager and manualy uninstall the drivers and make sure u manualy install the right ones
Sent from my Xperia U using xda app-developers app
ChikeD said:
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
Click to expand...
Click to collapse
i tried but felt only 1 vibration which powered up the device and got stuck on kernel.
vinayakagarwal1996 said:
i tried but felt only 1 vibration which powered up the device and got stuck on kernel.
Click to expand...
Click to collapse
Wait untill you feel 3 vibrations.
What firmware you had when you installed the rom and can you give the link to the thread of the rom you installed?
Do you have ftf to original formware?
One vibration reboot, three power off.
After you will switch off, try flash tft then.
Sent from my Xperia Sola using xda app-developers app
ChikeD said:
Wait untill you feel 3 vibrations.
What firmware you had when you installed the rom and can you give the link to the thread of the rom you installed?
Do you have ftf to original formware?
Click to expand...
Click to collapse
Actually before that i was trying to port a rom but it didnt work out.
so i flashed the pacman rom http://forum.xda-developers.com/showthread.php?t=2372433
in this i had to fastboot the boot.img which i then was unable to.
and before that i had the same rom installed. i have the original ftf.
i instaled the latest flashtool. it says the drivers arent installed but they are.
windows says unable to install drivers.
after i press the vol up and power, after 1 vibration it goes to kernel. i waited for 5 min pressing the buttons but nothing happened.
when on kernel, flashtool says device connected in usb debugging off.
Thanks for your help!
in the flashtool, i chose the log level to debug.
then my phone was able to get to the fastbot mode and i successfully fastbooted the correct cm kernel and booted up the rom!
vinayakagarwal1996 said:
Actually before that i was trying to port a rom but it didnt work out.
so i flashed the pacman rom http://forum.xda-developers.com/showthread.php?t=2372433
in this i had to fastboot the boot.img which i then was unable to.
and before that i had the same rom installed. i have the original ftf.
i instaled the latest flashtool. it says the drivers arent installed but they are.
windows says unable to install drivers.
after i press the vol up and power, after 1 vibration it goes to kernel. i waited for 5 min pressing the buttons but nothing happened.
when on kernel, flashtool says device connected in usb debugging off.
Click to expand...
Click to collapse
Did you replace the kernel image before installing? Realy weird why the didn't fo it themselves.
No ppoint to try booting the phone.
You have removable battery so try to remove it for a minute, put it back and see if you can connect in flash mode and flash original formware.
BTW what do you mean by "goes to kernel?" recovery?
ChikeD said:
Did you replace the kernel image before installing? Realy weird why the didn't fo it themselves.
No ppoint to try booting the phone.
You have removable battery so try to remove it for a minute, put it back and see if you can connect in flash mode and flash original formware.
BTW what do you mean by "goes to kernel?" recovery?
Click to expand...
Click to collapse
sorry. i may be wrong. i meant the first image that comes when you boot like fxp logo/sony/samusung logo
btw i have fixed the problem as stated in my above post.
and i have now reflashed it.