please help!
i was flashing the official pacman rom for xperia u. then i connected my phone to the computer to fastboot the cm kernel.
but the flashtool says that drivers need to be installed. i have installed the drivers but the problem still persists.
i tried to goto the cwm but after i keep pressing the vol down button, the led flashes but nothing comes. its a black screen.
now i'm not able to do anything to the phone not even abble to flash stock ftf!
Please help!
vinayakagarwal1996 said:
please help!
i was flashing the official pacman rom for xperia u. then i connected my phone to the computer to fastboot the cm kernel.
but the flashtool says that drivers need to be installed. i have installed the drivers but the problem still persists.
i tried to goto the cwm but after i keep pressing the vol down button, the led flashes but nothing comes. its a black screen.
now i'm not able to do anything to the phone not even abble to flash stock ftf!
Please help!
Click to expand...
Click to collapse
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
ChikeD said:
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
Click to expand...
Click to collapse
Or remove the battery you may need to open pc device manager and manualy uninstall the drivers and make sure u manualy install the right ones
Sent from my Xperia U using xda app-developers app
ChikeD said:
Press volume up | power key untill you feel 3 vibrations then try to power up again.
EDIT: have you installed flash mode and fastboot drivers mode drivers too?
Click to expand...
Click to collapse
i tried but felt only 1 vibration which powered up the device and got stuck on kernel.
vinayakagarwal1996 said:
i tried but felt only 1 vibration which powered up the device and got stuck on kernel.
Click to expand...
Click to collapse
Wait untill you feel 3 vibrations.
What firmware you had when you installed the rom and can you give the link to the thread of the rom you installed?
Do you have ftf to original formware?
One vibration reboot, three power off.
After you will switch off, try flash tft then.
Sent from my Xperia Sola using xda app-developers app
ChikeD said:
Wait untill you feel 3 vibrations.
What firmware you had when you installed the rom and can you give the link to the thread of the rom you installed?
Do you have ftf to original formware?
Click to expand...
Click to collapse
Actually before that i was trying to port a rom but it didnt work out.
so i flashed the pacman rom http://forum.xda-developers.com/showthread.php?t=2372433
in this i had to fastboot the boot.img which i then was unable to.
and before that i had the same rom installed. i have the original ftf.
i instaled the latest flashtool. it says the drivers arent installed but they are.
windows says unable to install drivers.
after i press the vol up and power, after 1 vibration it goes to kernel. i waited for 5 min pressing the buttons but nothing happened.
when on kernel, flashtool says device connected in usb debugging off.
Thanks for your help!
in the flashtool, i chose the log level to debug.
then my phone was able to get to the fastbot mode and i successfully fastbooted the correct cm kernel and booted up the rom!
vinayakagarwal1996 said:
Actually before that i was trying to port a rom but it didnt work out.
so i flashed the pacman rom http://forum.xda-developers.com/showthread.php?t=2372433
in this i had to fastboot the boot.img which i then was unable to.
and before that i had the same rom installed. i have the original ftf.
i instaled the latest flashtool. it says the drivers arent installed but they are.
windows says unable to install drivers.
after i press the vol up and power, after 1 vibration it goes to kernel. i waited for 5 min pressing the buttons but nothing happened.
when on kernel, flashtool says device connected in usb debugging off.
Click to expand...
Click to collapse
Did you replace the kernel image before installing? Realy weird why the didn't fo it themselves.
No ppoint to try booting the phone.
You have removable battery so try to remove it for a minute, put it back and see if you can connect in flash mode and flash original formware.
BTW what do you mean by "goes to kernel?" recovery?
ChikeD said:
Did you replace the kernel image before installing? Realy weird why the didn't fo it themselves.
No ppoint to try booting the phone.
You have removable battery so try to remove it for a minute, put it back and see if you can connect in flash mode and flash original formware.
BTW what do you mean by "goes to kernel?" recovery?
Click to expand...
Click to collapse
sorry. i may be wrong. i meant the first image that comes when you boot like fxp logo/sony/samusung logo
btw i have fixed the problem as stated in my above post.
and i have now reflashed it.
Related
hi.
i tried to flash boot.img from cm9.1 topic with se bootloader unlock tools.
but when i did this my phon was bricked.
when i try to turn it on it wasnt work.
when i hold down VOL+ power it vibrate but nothing changed.
and after 8 hour i cand use Vol + power too.
nothing happening.
when connect my phone to charger o usb cable. led turning on red.
but nothing else happening.
i see another post about this problem , some guys told to go fastboot and ...
but i cant go to fastboot or flash mode.
another way plz.
so sorry for my bad english.
Flashing at flashtool
Sent from my Xperia P using xda app-developers app
Wrond forum, it should be in Q&A. If you can enter flash mode flash with flash tool (find fw around this forum). Try changing the kernel to stock with adb command (not that tool you are using) fastboot flash boot (name of the kernel). Charge it for an hour and see what happens. Post the flash tool log here.
copper62472 said:
hi.
i tried to flash boot.img from cm9.1 topic with se bootloader unlock tools.
but when i did this my phon is bricked.
when i try to turn it on it wasnt work.
when i hold down VOL+ power it vibrate but nothing changed.
and after 8 hour i cand use Vol + power too.
nothing happening.
when connect my phone to charger o usb cable. led turning on red.
but nothing else happening.
i see another post about this problem , some guys told to go fastboot and ...
but i cant go to fastboot or flash mode.
another way plz.
so sorry for my bad english.
Click to expand...
Click to collapse
Flash the boot.img from the CM9.1 zip file (fastboot flash boot boot.img). Then reboot into recovery by holding the power and vol+ buttons until the phone vibrates 3 times, then boot (power button) and press vol+ when the button lights come on.
Then follow the instructions given before by DavidMKD.
tbschommer said:
Flash the boot.img from the CM9.1 zip file (fastboot flash boot boot.img). Then reboot into recovery by holding the power and vol+ buttons until the phone vibrates 3 times, then boot (power button) and press vol+ when the button lights come on.
Then follow the instructions given before by DavidMKD.
Click to expand...
Click to collapse
DavidMKD said:
Wrond forum, it should be in Q&A. If you can enter flash mode flash with flash tool (find fw around this forum). Try changing the kernel to stock with adb command (not that tool you are using) fastboot flash boot (name of the kernel). Charge it for an hour and see what happens. Post the flash tool log here.
Click to expand...
Click to collapse
dimon2242 said:
Flashing at flashtool
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
when i cant go to flashmode or fast boot , how can i flash kernel or boot.img or another file?
is there any way?
i connected charger red led in on but doesnt charge.( not gone hot)
no change at all.
sorry my bad english
copper62472 said:
when i cant go to flashboot or fast boot , how can i flash kernel or boot.img or another file?
is there any way?
i connected charger red led in on but doesnt charge.( not gone hot)
no change at all.
sorry my bad english
Click to expand...
Click to collapse
For flashtool need flashmode (not fastboot)!
Connected with PC (with started flashtool) with hold in button Vol-
dimon2242 said:
For flashtool need flashmode (not fastboot)!
Connected with PC (with started flashtool) with hold in button Vol-
Click to expand...
Click to collapse
flashmode doesnt work too :crying:
copper62472 said:
flashmode doesnt work too :crying:
Click to expand...
Click to collapse
Exactly flashtool already is started and flashmode drivers is installed?
Thread moved to the Q & A section, post in the relevant section next time.
copper62472 said:
flashmode doesnt work too :crying:
Click to expand...
Click to collapse
as far as i know, if the phone turn on any led, is still alive, try using flashtool and the original .tft, go for it in the P Development Section, download the 6.1.B.0.544 (Generic Version) and try to flash it, it might work, but you need to know this, if you flash it, you can void the warranty of the operator and if you unlocked the bootloader sony can't repair it (warranty void too) (i remember this was in the ToS of the bootloader unlock web)
Good luck.
(Sorry for my bad english.)
dimon2242 said:
Exactly flashtool already is started and flashmode drivers is installed?
Click to expand...
Click to collapse
of course the driver is installed .
problem isnt from my PC just on phone.
and isnt any way to go flashmode and fasboot.
please dont tell me again to flash anything.
i cant flash anyway.
blaazeer said:
as far as i know, if the phone turn on any led, is still alive, try using flashtool and the original .tft, go for it in the P Development Section, download the 6.1.B.0.544 (Generic Version) and try to flash it, it might work, but you need to know this, if you flash it, you can void the warranty of the operator and if you unlocked the bootloader sony can't repair it (warranty void too) (i remember this was in the ToS of the bootloader unlock web)
Good luck.
(Sorry for my bad english.)
Click to expand...
Click to collapse
thanks
then its alive.
maybe run out of battery .
but i cant remove it.( of course you know)
copper62472 said:
thanks
then its alive.
maybe run out of battery .
but i cant remove it.( of course you know)
Click to expand...
Click to collapse
do this, plug in the charger and let it charge (about 3 hours) and try to turn it on, if its a kernel problem, at least the phone try to boot up or turn on the backlight and get freezed, it's a OS/Kernel problem, but the question is, did you flash the correct kernel on it? remember the codename for xperia p is NYPON, inside the flashtool folders are the fastboot.exe, try to flashing a advanced kernel (the one made by DoomLoRD) and check for the phone, if it boot up until the xperia logo, everything is ok.
blaazeer said:
do this, plug in the charger and let it charge (about 3 hours) and try to turn it on, if its a kernel problem, at least the phone try to boot up or turn on the backlight and get freezed, it's a OS/Kernel problem, but the question is, did you flash the correct kernel on it? remember the codename for xperia p is NYPON, inside the flashtool folders are the fastboot.exe, try to flashing a advanced kernel (the one made by DoomLoRD) and check for the phone, if it boot up until the xperia logo, everything is ok.
Click to expand...
Click to collapse
oh no. i downloaded wrong file. and flashed (flashed only boot.img).
i used hikary
what can i do know?
blaazeer said:
do this, plug in the charger and let it charge (about 3 hours) and try to turn it on, if its a kernel problem, at least the phone try to boot up or turn on the backlight and get freezed, it's a OS/Kernel problem, but the question is, did you flash the correct kernel on it? remember the codename for xperia p is NYPON, inside the flashtool folders are the fastboot.exe, try to flashing a advanced kernel (the one made by DoomLoRD) and check for the phone, if it boot up until the xperia logo, everything is ok.
Click to expand...
Click to collapse
i tried to charge it about 30 min .
but my phone is cold yet. ( when i charging it should be warm.)
also its led just when i plug usb gone on.
i think itnt charging
how can i remove battery from my phone?
copper62472 said:
oh no. i downloaded wrong file. and flashed (flashed only boot.img).
i used hikary
what can i do know?
Click to expand...
Click to collapse
First, don't panic.
i made the same mistake when i flashed the first kernel, i think i messed up everything and... i recovered my phone xD
flash this kernel and hope the best, the instructions are in the post.
http://forum.xda-developers.com/showthread.php?t=1716966
first of all dont worry just know that when u press all the three buttons at the same time it reboots and when u still keep them pressed it shuts off completely
i have an xperia p and had the same problem
what u have to do is rlly simple
first unzip the kernel (boot.img) from the fxp144_cm9.1 zip file
now copy this file into the folder in android sdk/tools or platform-tools (basically any folder with the fastboot.exe )
hope u have installed fastboot drivers
now switch off ur fone completely
and then connect ur fone in fastboot mode by pressing the vol up key and connecting the usb
(hope it goes into fastboot mode)
run this command in cmd in the folder containing the fastboot.exe
fastboot flash boot boot.img
this flashes the kernel
using falshtools u can either flash the zip file or u can do it through recovery if its alread in ur sd card
do it twice bcoz the firs time it flashes the kernel
if none works switch of ur fone completely, press the vol down button and connect the usb
this puts the phone in flash mode and u can flash ftf files of stock roms
all the best
P.S all this will work if u have an unlocked bootloader by the method giiven on sony's official site
blaazeer said:
First, don't panic.
i made the same mistake when i flashed the first kernel, i think i messed up everything and... i recovered my phone xD
flash this kernel and hope the best, the instructions are in the post.
http://forum.xda-developers.com/showthread.php?t=1716966
Click to expand...
Click to collapse
dhireshmehta said:
first of all dont worry just know that when u press all the three buttons at the same time it reboots and when u still keep them pressed it shuts off completely
i have an xperia p and had the same problem
what u have to do is rlly simple
first unzip the kernel (boot.img) from the fxp144_cm9.1 zip file
now copy this file into the folder in android sdk/tools or platform-tools (basically any folder with the fastboot.exe )
hope u have installed fastboot drivers
now switch off ur fone completely
and then connect ur fone in fastboot mode by pressing the vol up key and connecting the usb
(hope it goes into fastboot mode)
run this command in cmd in the folder containing the fastboot.exe
fastboot flash boot boot.img
this flashes the kernel
using falshtools u can either flash the zip file or u can do it through recovery if its alread in ur sd card
do it twice bcoz the firs time it flashes the kernel
if none works switch of ur fone completely, press the vol down button and connect the usb
this puts the phone in flash mode and u can flash ftf files of stock roms
all the best
P.S all this will work if u have an unlocked bootloader by the method giiven on sony's official site
Click to expand...
Click to collapse
i thing my phone is discharged. cant turn it on.
and cant charge too
keep the phone charging, the led doen't matter as far as i know.
last option is going to a sony service or something like that.
i think you should try to remove battery first. i used this method to recover my p. i opened the back cover and removed the battery for a few minutes and then did nothing but connected it in fastboot and flashed the correct kernel.
to remove back cover you have to remove two screws at the both sides and two under the bar over the camera. just remove the top plastic cover and you will be able to access the screws. then just remove the battery connector for a few minutes reconnect it and try flashing kernel again. i wish it also work for you bro. good luck. :good:
I've been trying to flash the stock firmware of my Xperia Neo V with flashtool, but when I put the phone in flash mode (back + connect usb, green led) it stays in flash mode for like 30 seconds and then it reboots in normal mode, making the flash impossible. Why could this be happening?
Fyrox said:
I've been trying to flash the stock firmware of my Xperia Neo V with flashtool, but when I put the phone in flash mode (back + connect usb, green led) it stays in flash mode for like 30 seconds and then it reboots in normal mode, making the flash impossible. Why could this be happening?
Click to expand...
Click to collapse
have you turn on usb debugging mode?
Connect the mobile when it asked to you by the flash tool.
None of the solutions worked. It still reboots making it impossible to flash the firmware.
what version Flashtool u have?
Flashtool 0.9.8. I'm starting to think that the problem is the kernel. This didn't happen to me until I flashed the FXP145 Kernel. Maybe its a bug. Btw, I have another problem with this kernel, when I boot recovery mode, Everytime I press volume down or up to navigate through the menu, the screen moves to the right. When I press again, it returns to its original position and then it moves again. Don't know if its my phone or this kernel is a bit buggy.
Fyrox said:
Btw, I have another problem with this kernel, when I boot recovery mode, Everytime I press volume down or up to navigate through the menu, the screen moves to the right. When I press again, it returns to its original position and then it moves again. Don't know if its my phone or this kernel is a bit buggy.
Click to expand...
Click to collapse
It's a known bug in CM10 kernel.
About your initial problem, did you try with different USB cable? If not, try.
Mhm I lost the other USB cable I had... anyway, I'll get one tomorrow and see if that works.
Apparently, using a new cable worked. Now I've finally flashed the firmware. Thanks.
Apparently, using a new cable worked. Now I've finally flashed the firmware. Thanks.
Click to expand...
Click to collapse
hit the thanks button for Madfysh instead of saying it
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
melvinpetix said:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
Click to expand...
Click to collapse
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
mirost1 said:
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
Click to expand...
Click to collapse
I've tried connecting sola to PC but it seems like flashtool can't detect it. Is there other way to connect it to PC so flashtool can detect the device? I already downloaded stock firmware
Still no luck
1) Hold power + vol up until you feel the phone vibrates 3 times.
Quickly hold power down, and shove the USB wire in.
It should detect your phone in flashboot now.
2) Alternatively, after the phone vibrates 3 times, keep a hold on vol up to get it into fastboot. Then flash the correct kernel for the rom you have.
Note that ICS, GB and CM roms all use a different kernel. Make sure you have the right one.
3) Lastly, if your phone's bootloader is still locked, you can just repair using SUS.
Hi I'm BrianXYap New to XDA. So I recently just rooted my Sk17i but didn't unlock boot loader. I was trying to install cm10 on my Sk17i.It obviously failed so I gave up. (Using CWM) when I clicked reboot system, I was stuck at the Sony Ericsson logo . I tried to Go to the recovery mode or any other modes but they don't work. Can You DEV's Help me? also when I plug it in to my computer it doesn't charge for some reason. there is also no LED notification light, is it because of the failed Flash caused all these things to happen? Help!
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
an0nym0us_ said:
Flash stock ftf Rom via flashtool.
And cm10 needs unlocked boot loader to flash it's custom kernel.
Click to expand...
Click to collapse
heres links - http://forum.xda-developers.com/showthread.php?t=1568792
Flashtool method
Download the correct firmware file for your phone at the bottom of the post.
Make sure Flashtool is installed.
Place downloaded firmware file(.ftf format) in Flashtool\firmwares(by default C:\Program Files\Flashtool) folder.
Start Flashtool.
Click the lightning button and choose Flashmode.
Firmware should appear there, if you have it in correct folder. Choose it.
Turn off your phone, connect USB cable to computer, then press Volume Down button and connect USB cable to your phone.
Flashtool should detect your phone and starts flashing. Follow the instructions.
When it says „Flashing completed“, unplug your phone and turn it on.
Click to expand...
Click to collapse
THe Problem is I can't do volume down combination. It still stucks at the logo
Uninstall everything on the PC related to your Phone then start from scratch.
Sent from Myushi
BrianXYap said:
THe Problem is I can't do volume down combination. It still stucks at the logo
Click to expand...
Click to collapse
What volume combination and stuck at the logo mean? You do flashing firmware via flashtool with device off.
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Be sure that the phone is off then plug the usb cabl and hold volum down key in the same time and your in flash mod then open flashtool and see videos on youtube on how to flash ftf files using flashtool and that should be over
Sent from my SK17i using xda app-developers app
BrianXYap said:
It said connect USB cable and then power + vol - .I did it but nothing happened. It's still at the logo. I installed an official firmware once and a blue led indicator showed up. Now it doesn't .
Click to expand...
Click to collapse
do you really want a cm10 rom? then unlock your bootloader (but be mindful that you may lose your warrant and bad things might happen to your phone) here's the tut http://forum.xda-developers.com/showthread.php?t=1879750
after you unlock your bootloader
flash your kernel through flashtool
then install cm10 rom
but if you want to go back to your stock rom
you need flashtool and obviously your stock rom (ftf file)
click the lightning-like button then choose flashmode
select the rom then you'll be prompted to connect your phone
hold the power button and volume down button at the same time until the led light is blue.
wait to complete and your back to your original rom
i hope it helped you
Hi guys,
I have mk16i(xperia pro), and installed latest lx cm11 build. Then, I tried dark's kernel. But I wanted to revert to the stock kernel.
Now at that point, i couldn't enter the fastboot or flash mode anymore. The OS running w/o any problem. But i'm stuck with the dark's kernel(which is very battery unfriendly,10 hour standby)
When i try to connect the phone to PC while pressing menu(or back button) the LED blinks for miliseconds and the phone continues switching on normally (enter OS).
I know it is my fault to install nonstock kernel but I really need help. If anyone experienced this issue, it will be great to hear the advice.
Thanks in advance
Try taking out the battery for a few seconds, reinserting it, pressing the button for fastboot mode (I don't know which one you have to use for the xperia pro) and then you connect it to your PC while keeping the button pressed. This should work
Sent from my Nexus 4 running Android 4.4
mihahn said:
Try taking out the battery for a few seconds, reinserting it, pressing the button for fastboot mode (I don't know which one you have to use for the xperia pro) and then you connect it to your PC while keeping the button pressed. This should work
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
Thanks for the reply.
I tried it many times. But no chance... The LED blinks then the phone goes into OS.
I tried to reboot fastboot via adb commands. Again same result. Directly goes to OS.
Flashtool also stucks at "Device will soon enter fastboot mode" nothing happens. Phone stays on...
Is it hw fault? I will be very disappointed if so I replaced its digitizer recently by paying too much money.) It was expensive when i bought it also... I cant stand buying a new phone these times... pff too many issues...
Sounds weird. I have made the experience that it sometimes helps to take the battery out, then keep pressing multiply and long the power button. Wait ~10 minutes. Insert the battery and try again!
Hopefully it helps!
Otherwise could maybe be kernel related. Try to flash another one (with recovery).
Depressed T.Bear said:
Sounds weird. I have made the experience that it sometimes helps to take the battery out, then keep pressing multiply and long the power button. Wait ~10 minutes. Insert the battery and try again!
Hopefully it helps!
Otherwise could maybe be kernel related. Try to flash another one (with recovery).
Click to expand...
Click to collapse
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
datumdatzgr said:
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
Click to expand...
Click to collapse
i think you done it allready but better than have adead phone:
- re check if all drivers installed (android sdk with its google driveer, flashtool drivers)
put out battery , put in & hold volume down while plugging cabel in. (if led not stays blue, pull out abttery, put in & reconnect but hold other button like menu key) --> try all buttons
i cant imagine flashing darks kernel broke yr bootloader. theres sth wrong with your machine / setup / whatever.
datumdatzgr said:
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
Click to expand...
Click to collapse
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Depressed T.Bear said:
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Click to expand...
Click to collapse
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
bejunk said:
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
Click to expand...
Click to collapse
That goes without saying! But he hasn't said that he unlocked it.
bejunk said:
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
Click to expand...
Click to collapse
Depressed T.Bear said:
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Click to expand...
Click to collapse
bejunk said:
i think you done it allready but better than have adead phone:
- re check if all drivers installed (android sdk with its google driveer, flashtool drivers)
put out battery , put in & hold volume down while plugging cabel in. (if led not stays blue, pull out abttery, put in & reconnect but hold other button like menu key) --> try all buttons
i cant imagine flashing darks kernel broke yr bootloader. theres sth wrong with your machine / setup / whatever.
Click to expand...
Click to collapse
Thanks for the answers. Yes unlocked bootloader.
Since the device doesn't boot into "flash" mode also, i am not able to flash ftf through flashtool or any firmware via SEUS.
I had managed to enter fastboot mode once!
Happened with USB3.0 port via "adb reboot-bootloader" command.
Still, I am not getting into fastboot again...
I will inform you, thanks guys.
EDIT: I did it once again thru adb in recovery and flashed a stock kernel. Let me see the battery drain is due to kernel or some hw damage.
I am sure hw is damaged...
Ultimately solved...
After i am able to enter fastboot mode via some funny method described above, i erased system partition and flashed kernel.sin of the official .587 ftf file of Sony Xperia Pro.
Now the device is able to enter flash mode and fastboot mode via normal ways...
Thanks guys...
EDIT: I dont understand how is it related to kernel? I thought that bootloader files are damaged which i cannot correct them.
There are many .sin files in the stock .ftf which i cannot flash any of them without flash mode.(i was able to enter fastboot mode only)
datumdatzgr said:
After i am able to enter fastboot mode via some funny method described above, i erased system partition and flashed kernel.sin of the official .587 ftf file of Sony Xperia Pro.
Now the device is able to enter flash mode and fastboot mode via normal ways...
Thanks guys...
EDIT: I dont understand how is it related to kernel? I thought that bootloader files are damaged which i cannot correct them.
There are many .sin files in the stock .ftf which i cannot flash any of them without flash mode.(i was able to enter fastboot mode only)
Click to expand...
Click to collapse
The problem started occuring again. LED blinks again.
This time i am not able to enter fastboot via adb while in recovery mode or another mode. I can't enter fastboot or flash mode, cant install kernel. Tried two pc's many usb cables...
I don't know what to do...
datumdatzgr said:
The problem started occuring again. LED blinks again.
This time i am not able to enter fastboot via adb while in recovery mode or another mode. I can't enter fastboot or flash mode, cant install kernel. Tried two pc's many usb cables...
I don't know what to do...
Click to expand...
Click to collapse
Guys please help. I am very confused now: When i connect the phone to charger(AC) when the phone is OFF, the phone tries to enter flash mode!?! Led blinks green then the phone continues to open and offline charging animation comes as usual.
Sometimes the phone connects the charger in flash mode! But doesnt connect to usb in flash mode or fastboot mode. I know it is a bit confusing but that is the situation.
Thanks...