hi, what is Storage USB? (in Settings -> Storage), can I plug pendrive?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ariek44 said:
hi, what is Storage USB? (in Settings -> Storage), can I plug pendrive?
Click to expand...
Click to collapse
Ye, but you need an USB OTG cable for that to work. You can also plug in a mouse or a keyboard in your phone. And a hub too.
Thanks for reply, I found a schematic, i will try connect
ariek44 said:
Thanks for reply, I found a schematic, i will try connect
Click to expand...
Click to collapse
If you replace the short wire between 4(sense) and 5(gnd) pin on the second schematic with a 10Kohm resistor you will obtain a safefull cable dock car. It will start HTC Car app when you plug the cable on the phone... no need to connect to power supply.
ok, storage usb work good
and keyboard with trackball (mouse) work good too
Nice!
Flowed from my HTC branded muffin...
Hi
How can i add usb drive , i have otg cable that work by sgs 2 now but not working with my desire x (rom:4.0.4) !!!!
Thanks for attention
Sent from my HTC Desire X using Tapatalk 2
babakhad said:
Hi
How can i add usb drive , i have otg cable that work by sgs 2 now but not working with my desire x (rom:4.0.4) !!!!
Thanks for attention
Sent from my HTC Desire X using Tapatalk 2
Click to expand...
Click to collapse
OTG support was added in Jellybean update.
Regards,
navmad
babakhad said:
Hi
How can i add usb drive , i have otg cable that work by sgs 2 now but not working with my desire x (rom:4.0.4) !!!!
Thanks for attention
Sent from my HTC Desire X using Tapatalk 2
Click to expand...
Click to collapse
Try Kernel Tuner app from play store. Give it root, and go to misc. Enable USB OTG and it should work in ics.
Flowed from my HTC branded muffin...
Stereo8 said:
Try Kernel Tuner app from play store. Give it root, and go to misc. Enable USB OTG and it should work in ics.
Flowed from my HTC branded muffin...
Click to expand...
Click to collapse
Tried it but after connecting the cable and pendrive, phone restarts itself.
Sent from my HTC Desire X using xda premium
Only Fat32 works if you have NTFS pen drive phone say "empty storage".
Do you know if is there any solution without root?
Sent from my HTC Desire X using xda app-developers app
Now i use kernel tuner but when i on otg in misc option , then apply ,
When i check misc again the menu show off ,
And nothing happen when conect a pen drive ,
Sent from my HTC Desire X using Tapatalk 2
Did smb try to connect wireless radio mouse to DX? And please, smb try connecting usb pen drive formatted to ext4 or ntfs (32+gb). My previous phone (Nokia 701) was only able to open pen-drives formatted to FAT32 less than 32Gb. The same problem was with 2.5" HDD (500 gb, but formatted to FAT32). If someone succeeded in running such devices, please post your results here
Related
I just bough an usb otg adapter and it does not work. Does not recognize usb stick or gamepad. Aby solution? Or will i need to wait for ics?
Sent from my MT27i using xda app-developers app
IE-coRe said:
I just bough an usb otg adapter and it does not work. Does not recognize usb stick or gamepad. Aby solution? Or will i need to wait for ics?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Maybe your OTG cable not supported! I bought original Samsung OTG cable and works fine! On my xperia u (should work on sola too ) For gamepad need a driver or bla bla bla.
USB Mouse works fine too
Sent from my ST25i using xda app-developers app
Elwino2.3 said:
Maybe your OTG cable not supported! I bought original Samsung OTG cable and works fine! On my xperia u (should work on sola too ) For gamepad need a driver or bla bla bla.
USB Mouse works fine too
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Its two adapters, one from usb typa a to mini usb, one from mini to micro usb. I just saw it in a little shop here in taiwan, was only a few bucks so i took it. I did not know that i need something specific...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MT27i using xda app-developers app
Anyone an idea to fix this?
Sent from my MT27i using xda app-developers app
IE-coRe said:
I just bough an usb otg adapter and it does not work. Does not recognize usb stick or gamepad. Aby solution? Or will i need to wait for ics?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
May be your gamepad and usb stick not supported! try another usb stick! Check USB OTG adapter by connecting USB mouse - must work 100% with proper adapter (yo will see mouse pointer appering on screen)!
modds?
Elwino2.3 said:
Maybe your OTG cable not supported! I bought original Samsung OTG cable and works fine! On my xperia u (should work on sola too ) For gamepad need a driver or bla bla bla.
USB Mouse works fine too
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Has your device been modded in anyway? or is it still stock rom and kernel?
Ps just made one now and my device is as dead as door knob.:cyclops:
USB OTG Problem
plageran said:
Has your device been modded in anyway? or is it still stock rom and kernel?
Ps just made one now and my device is as dead as door knob.:cyclops:
Click to expand...
Click to collapse
Hai dudes,
I bought Callmate USB OTG Cable from Flipkart, Am having Xperia Sola loaded SXDXPepperZ1 ROM v3.1 Final Release Rom.
When am inserting OTG cable with and without a Pendrive, its getting rebooted.
Please help me to solve it friends....
rather make your own than buy one, I heard some devices are wired differently. ie. a samsung cable frying a sony usb port.
for better support, unlocking your bootloader will allow you to use a kernel with that support.
http://www.nxttech.in/how-to-make-your-own-usb-otg-cable-for-an-android-phone/
tparthasarathy said:
Hai dudes,
I bought Callmate USB OTG Cable from Flipkart, Am having Xperia Sola loaded SXDXPepperZ1 ROM v3.1 Final Release Rom.
When am inserting OTG cable with and without a Pendrive, its getting rebooted.
Please help me to solve it friends....
Click to expand...
Click to collapse
Bought it today for about ten dollars works good for usb and sd cards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using xda app-developers app
Where did you get it?
Sent from my GT-P3113 Romswell v1.0 using Tapatalk 2
Gamer819 said:
Where did you get it?
Sent from my GT-P3113 Romswell v1.0 using Tapatalk 2
Click to expand...
Click to collapse
Bought from a computer store in Egypt it is for tab1 but work perfectly in tab2, you could try searching by term (5 in 1 card reader tab) in google or try these links
http://www.amazon.com/Skque-Card-Reader-connection-Samsung/dp/B0073L8GXW
http://www.ebay.com/itm/5-1-Samsung...-Card-Reader-Kit-OTG-Host-Black-/390369849789
http://www.dealextreme.com/p/5-in-1...alaxy-tab-10-1-p7510-p7500-p7300-p7310-106445
http://cute-online.com/index.php/5-in-1-card-reader-usb-samsung-galaxy-tab-qt-3102.html
Sent from my GT-I9100 using xda app-developers app
I got this about two weeks ago on ebay but I cannot get it to mount. What did you do to make it work? Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
nookie1129 said:
I got this about two weeks ago on ebay but I cannot get it to mount. What did you do to make it work? Thanks
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I use cm10 latest nightly with regular overclocked kernel from Johnsel
Try attaching a usb mouse or usb keyboard and see if it work
Try attaching a fat formatted usb stick not ntfs formatted one
Try a different usb stick if you can
Do not try a usb powered hard disk but you could try external powered hard disk
Try app from google play called paragon to mount the usb stick esp if formatted ntfs
Try fat formatted sd card
Open setting/storage and go down (lower than sd card list) and see if the usb stick is mounted if not click mount and see
Try app like astro file manager to try to access the usb stick files click up in it and see the usb directory
Sent from Galaxy S2 or Galaxy Tab2
So I came across something earlier today that I have been searching for forever. USB Host Mode for Sense! Here is the link that will help. Special thanks to whoever posted it on TheMikMik site.
http://themikmik.com/showthread.php?14498-USB-Host-Mode-anyone
I was able to get it to work by adding "/mnt/usb" without quotes under settings in the USB Host Controller app.
Sent from my EVO
USB OTG
michael291986 said:
So I came across something earlier today that I have been searching for forever. USB Host Mode for Sense! Here is the link that will help. Special thanks to whoever posted it on TheMikMik site.
http://themikmik.com/showthread.php?14498-USB-Host-Mode-anyone
I was able to get it to work by adding "/mnt/usb" without quotes under settings in the USB Host Controller app.
Sent from my EVO
Click to expand...
Click to collapse
What ROM and Kernel are you using?
adz1966 said:
What ROM and Kernel are you using?
Click to expand...
Click to collapse
X2
I am currently using Stock with Goodies 2.28 Rom by Flex360 and using Evil Z 7rc Kernal from Team Blackout.
Sometimes the app does not automatically mount my device, but I can confirm that an 8GB USB drive and a SD in a multi reader work fine.
Sent from my EVO
OK so I created a quick walkthrough and took a few screenshots from start to finish. (Assuming you have added the "/mnt/usb" (my preference).
Here is the OTG cable I use. Couple bucks from Amazon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You will get this "Can not Charge" error.
Open the USB host app (after you plug in the OTG with device) you will notice the progress busy for about a minute.
After processing you should see this screen.
Click the USB tab and you should see your connected device.
Click on bottom option, you should get a selection screen. Choose Reload Partition Table.
You should see "SDA1" (or equivalent) now listed.
Click SDA1 and select mounting point (I only have "/mnt/usb" since I removed the default ones from settings and had only added this one).
The device is now mounted!
Using your file management app of choice (in my case ES file explorer) navigate to the mounting point you have chosen. And enjoy!
Sent from my EVO
IMHO this is a much better app mounts a drive in a second
http://forum.xda-developers.com/showthread.php?t=1802740
Sent from my EVO using Tapatalk 2
thicklizard said:
IMHO this is a much better app mounts a drive in a second
http://forum.xda-developers.com/showthread.php?t=1802740
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I tried it. Didn't work for me. If something works better than what I have I would definitely use it and agree with anyone that shares it.
Sent from my EVO
Really? I've been using it since I released awesome sauce on sense and still us it on my aosp kernel.
Sent from my EVO using Tapatalk 2
thicklizard said:
Really? I've been using it since I released awesome sauce on sense and still us it on my aosp kernel.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Maybe it is my Kernel/ROM combination.
Sent from my EVO
I'm some noob to Android and wondering about the files and directories I found out that there's a file in /dev called tty, so I wonder if I can use something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For using serial devices to comunicate with apps and I don't know using that for configuring routers by a HyperTerminal console, just wondering.
It's possible, someone tried it?
Seriosly, in the mother of god Android forum with a lot of users, no one ever tried to make Serial devices work with Android?
manudo said:
Seriosly, in the mother of god Android forum with a lot of users, no one ever tried to make Serial devices work with Android?
Click to expand...
Click to collapse
Good god, no. I've probably touched a cd/dvd more recently than I've handled a device with those kinds of plugs and when I did I was literally throwing them in a dumpster. The few crazy things I've seen here on XDA are being done over USB.
manudo said:
I'm some noob to Android and wondering about the files and directories I found out that there's a file in /dev called tty, so I wonder if I can use something like this:
For using serial devices to comunicate with apps and I don't know using that for configuring routers by a HyperTerminal console, just wondering.
It's possible, someone tried it?
Click to expand...
Click to collapse
That's a VGA cord. The new version of that cord is an HDMI cord. I'm not sure what you're trying to do with it?
Sent from Nexus 7 flo running Paranoid Android 4.3 JB using xda app-developers app
LinearEquation said:
That's a VGA cord. The new version of that cord is an HDMI cord. I'm not sure what you're trying to do with it?
Sent from Nexus 7 flo running Paranoid Android 4.3 JB using xda app-developers app
Click to expand...
Click to collapse
No, this is a VGA plug.
See that 6 and 10 pins are different than serial. Common error.
manudo said:
No, this is a VGA plug.
See that 6 and 10 pins are different than serial. Common error.
Click to expand...
Click to collapse
I can't see the pinout of the first pic plus I'm on a tablet.
Sent from Nexus 7 flo running Paranoid Android 4.3 JB using xda app-developers app
LinearEquation said:
I can't see the pinout of the first pic plus I'm on a tablet.
Sent from Nexus 7 flo running Paranoid Android 4.3 JB using xda app-developers app
Click to expand...
Click to collapse
There you go...
A male serial port in HD definition. (too much to don't be seen by a Nexus 7)
Does this help somehow?
Android Serial Port API for some HTC devices
Playstore app for Galaxy
There are many other hits consulting Dr.Google "android serial connector"
My razr bricked, so I plug my phone with charging cable but cannot charge at all.
I think it can't be charged with normal way.
In bootloader, it says battery low.
Can I charge my razr in bootloader screen??
newget said:
My razr bricked, so I plug my phone with charging cable but cannot charge at all.
I think it can't be charged with normal way.
In bootloader, it says battery low.
Can I charge my razr in bootloader screen??
Click to expand...
Click to collapse
You need a usb Cable. Cut It in the middle take the two cables inside red and black ones, open the back of your razr (see YouTube for a video tutorial) and connect the black cable with - under the protection rubber and red cable with +
Now connect the other end of usb Cable to a wall charger and with another usb - micro usb connect the phone to a usb on your PC. Now you are able to fastboot your razr! Enjoy!
Inviato dal mio XT910 usando XDA Premium HD app
vince686 said:
You need a usb Cable. Cut It in the middle take the two cables inside red and black ones, open the back of your razr (see YouTube for a video tutorial) and connect the black cable with - under the protection rubber and red cable with +
Now connect the other end of usb Cable to a wall charger and with another usb - micro usb connect the phone to a usb on your PC. Now you are able to fastboot your razr! Enjoy!
Inviato dal mio XT910 usando XDA Premium HD app
Click to expand...
Click to collapse
Can you give me the link with Youtube video?
newget said:
Can you give me the link with Youtube video?
Click to expand...
Click to collapse
Here is it http://youtu.be/78gJRP8NzRA
Inviato dal mio XT910 usando XDA Premium HD app
I had to buy the cable also and it works trust me
Sent from my XT912 using Tapatalk
vince686 said:
Here is it http://youtu.be/78gJRP8NzRA
Inviato dal mio XT910 usando XDA Premium HD app
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THANK YOU!
Now, I can use my razr