[Q] - Xperia Sola .54 Stock Rom Update Fail - Sony Xperia P, U, Sola, Go

Hello everyone,
First of all this is my frist post, I'm sorry if I did something wrong.:silly:
I have rooted my xperia sola and flashed some mods, (Tweak&CPU - Xperia Z Launcher). I got .54 Official Rom, but Update Center keep saying there is an update. I tried many times to update but it says after rebooting "It has failed, Try Again."
What did I do wrong?
Thank you very much.
------
Screenshots (If It Helps)

You have unlocked bootloader right? Sony PCC have problems with such phones(mine too) showing that there is update, when you had already updated. Just ignore it for now, but you won't be able to install future updates
Sent from my MT27i using xda app-developers app

Oh thank you for information. I was just wondering if i did something wrong. Yes I unlocked BL. Anyways thanks again
Sent from my MT27i using Tapatalk 2

Do this , go to dialer , type #*#*7378423#*#*
Go to service info ---------> Software info
Check and POST the phone software version & File system version.

What's the difference between 'Phone Software Version' and 'File System Version' ?
I got different values.
It says Phone Software V : 6.1.1.B.1.10
File System V : 6.1.1.B.1.54
Sent from my MT27i using Tapatalk 2

404_Not_Found said:
What's the difference between 'Phone Software Version' and 'File System Version' ?
I got different values.
It says Phone Software V : 6.1.1.B.1.10
File System V : 6.1.1.B.1.54
Sent from my MT27i using Tapatalk 2
Click to expand...
Click to collapse
Ahh... a similar problem which i had ... the Phone software version is influenced by your kernel .. :silly:
Your kernel is based on b.1.10 and so your PCC assumes that your entire firmware is out of date and attempts to correct this though an update , which for obvious reasons , it can't cause you've unlocked your BL
Solution? Shift to an updated kernel of the one you are using , make sure it's either of the same version or higher than that of the ROM firmware .
Still if you cant get another kernel ,simply freeze the update app on Titanium Backup :victory:
Hope this helps ,
Press Thanks if it did =D

Bhargav4591 said:
Ahh... a similar problem which i had ... the Phone software version is influenced by your kernel .. :silly:
Your kernel is based on b.1.10 and so your PCC assumes that your entire firmware is out of date and attempts to correct this though an update , which for obvious reasons , it can't cause you've unlocked your BL
Solution? Shift to an updated kernel of the one you are using , make sure it's either of the same version or higher than that of the ROM firmware .
Still if you cant get another kernel ,simply freeze the update app on Titanium Backup :victory:
Hope this helps ,
Press Thanks if it did =D
Click to expand...
Click to collapse
Mine are 6.1.B.1.75 and 6.1.B.1.54 so I don't think updating will help.

asakurato said:
Mine are 6.1.B.1.75 and 6.1.B.1.54 so I don't think updating will help.
Click to expand...
Click to collapse
So you're being asked to update even though your kernel is based on 6.1.B.1.75 (higher) ... odd ...... try getting a kernel that matches your file system version i.e a 6.1.B.1.54 kernel(stock or custom) this should hopefully work . Else , since you've unlocked your BL ,why not use a custom ROM ?

I don't know how I got .75 sw version(about phone shows .54), but my kernel is based on latest official sources(Vengeance 1.26 kernel). When I asked developer about this, he said it's normal with unlocked BL. As for custom rom, I'm planning to install one, I'm just searching for one that fits me perfectly.
Sent from my MT27i using xda app-developers app

asakurato said:
I don't know how I got .75 sw version(about phone shows .54), but my kernel is based on latest official sources(Vengeance 1.26 kernel). When I asked developer about this, he said it's normal with unlocked BL. As for custom rom, I'm planning to install one, I'm just searching for one that fits me perfectly.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
If you're just annoyed with the update notification , freeze 'update center 'app via Titanium backup =P

Related

[Q] Help me the Custom rom don't work on my Neo.

I have my Neo from a few months and I'm so proud of it. But, in the lasts week, I'm excited to receive the ICS update, so I can't wait and I tried to flash some custom rom on my NEO. First of all I have the .42 firmware stock with root and CWM installed with bootloader locked.
Before i tried to flash a custom Rom, I have unlocked the bootloader. And everything going well, but I try to flash 2 different Custom Rom both with the same result: in the reboot after the flash the NEo is stucked on the Sony Ericsson boot logo animation for an indefinite time, and i don't do nothing except to unplug the battery. So i return to the stock rom using flashtool.
But I really want to tried this custom rom based on ICS, anyone can hellp me?
emaxxim said:
I have my Neo from a few months and I'm so proud of it. But, in the lasts week, I'm excited to receive the ICS update, so I can't wait and I tried to flash some custom rom on my NEO. First of all I have the .42 firmware stock with root and CWM installed with bootloader locked.
Before i tried to flash a custom Rom, I have unlocked the bootloader. And everything going well, but I try to flash 2 different Custom Rom both with the same result: in the reboot after the flash the NEo is stucked on the Sony Ericsson boot logo animation for an indefinite time, and i don't do nothing except to unplug the battery. So i return to the stock rom using flashtool.
But I really want to tried this custom rom based on ICS, anyone can hellp me?
Click to expand...
Click to collapse
This has been asked to many times baseband to old I think bro we have a general questions thread
Think before posting and use search tool
Sent from my Xoom using Tapatalk
kormatoes said:
This has been asked to many times baseband to old I think
Click to expand...
Click to collapse
I think his problem is that he didn't wipe/format something before flashing zip.
Old baseband is causing problems with ending calls
Madfysh said:
I think his problem is that he didn't wipe/format something before flashing zip.
Click to expand...
Click to collapse
Believe me, I follow step-by-step the instructions that are on the thread here on xda (I tried to install Fast & Stable|KA05 Ice Cream Sony and AOSP 4.0.3 ICS BETA FINAL | Fast and Clean)
Madfysh said:
Old baseband is causing problems with ending calls
Click to expand...
Click to collapse
What is it baseband? Do I have an old baseband? How I find out ?
I think the problem is my CWM.
emaxxim said:
Believe me, I follow step-by-step the instructions that are on the thread here on xda (I tried to install Fast & Stable|KA05 Ice Cream Sony and AOSP 4.0.3 ICS BETA FINAL | Fast and Clean)
What is it baseband? Do I have an old baseband? How I find out ?
I think the problem is my CWM, because now I'm trying to install the PWN kernel, and the installation trough fastboot is ok, I flash the modules to fix the wifi but the wifi don't work. Any suggestion?
Click to expand...
Click to collapse
Ics kernel ics roms
Sent from my MT15i using Tapatalk
kormatoes said:
Ics kernel ics roms
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Yer get elf kernel get stock rom from my signiture and do some reading use the pm feature pm some one who u think can help and just wait a bit before you end up realy with a brick
Peace
Sent from my MT15i using Tapatalk
Madfysh said:
I think his problem is that he didn't wipe/format something before flashing zip.
Old baseband is causing problems with ending calls
Click to expand...
Click to collapse
No brother!!! I have the same experience!!! But then I flashed another time and things went well
Sent from my MT11i using Tapatalk 2
i think the problem is causing because ur r flashing ICS custom rom directly on GB... flash stock ICS ftf file using flashtool, flash any custom kernel in fastboot mode using flashtool suitable for the ROM u want to flash (custom kernels has built in CWM), then goto CWM, wipe everything, flash the ROM, done... now that should work..
goto Settings > about phone > baseband to check the baseband's version
Guys a year passed by since that question was asked !
Sent from my MT11i using xda premium

[Q] Reboot problem, rooted phone with two installed apps by cwm :/

Hi all!
(Well, I have to start with that I'm hungarian so sorry for my english.)
I dont know if anyone has already mentioned this problem in other threads but i didnt find any. So my problem is that I rooted my phone with changing kernel (neoV 4.0.3) after that rooting and after rooting upgrading the latest mini pro kernel in my phone (4.1.B.0.587).
There was no problem i have managed to root my phone. After that i downloaded the cwm auto installer app from play and installed cwm. After that i installed two apps with cwm, exactly: http://forum.xda-developers.com/showthread.php?t=1705352&highlight=root
and http://forum.xda-developers.com/showthread.php?t=1695048
After these steps i realised that my girlfriend wanted to call me but it was a missed call so i tried to call her back. And HERE IS THE PROBLEM: when i touch on the button with the green phone icon before starting to call anyone my phone collapsed and reboots itself.
Well i dont know if the problem comes from the root (maybe i did something wrong but got good result) or from the 2 apps installed with cwm and there i made some mistakes :/ well i dont know i think i did everything well but as i said i really dont know what the problem is.
Please help me!! Thank you in advance
Post the links of those two apps properly... Unable to click them directly
And as you said your phone is NEO V or Mini Pro
then why did you upload the "neo v" "latest mini pro kernel" :what::sly::banghead:
Specify your phone and kernel properly or upload a screenshot
And if you have you have installed mini pro kernel in neo V or vice versa
Then flash stock firmware via flashtool
Sent from my Smultron running CM10
I have mini pro(sk17i), but as you know mini pros dont have 4.0.3 kernel and rom cause the first ics was the 4.0.4 so i just chose a random 4.0.3 kernel (neov) and rooted that one and after the root i put the original sk17i kernel 4.1.B.0.587 back. and after that i got root permissions in my 4.0.4 ics phone with its official latest kernel. Thats all. I just followed the steps to root. and now you can see the apps' urls
Another bad news: when i plugged in my phone to raise the battery's levél the phone rebooted again
Sent from my SK17i using xda premium
krissztyoon said:
Another bad news: when i plugged in my phone to raise the battery's levél the phone rebooted again
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
I think you installed an inappropriate kernel for your device...
Download the stock firmware for your device... Flash it via Flashtool
Then again unlock your bootloader
And this time install any supported kernel like Kamarush v3 or Kernel Panic... I mean any prerooted kernel... And after you get root access just switch to latest firmware... And .587 is whole new stock firmware Not kernel...
Sent from my Smultron running CM10 by
---------- Post added at 07:12 AM ---------- Previous post was at 07:07 AM ----------
The Walkman app you tried sucks...
http://forum.xda-developers.com/showthread.php?t=1856186
Flash it... And see the difference :thumbup:
Sent from my Smultron running CM10 by
U don't necessarily have to install the neo v firmware
u can install GB, root it and then upgrade to .587 with the rooting method you followed
PREDATOR95 said:
I think you installed an inappropriate kernel for your device...
Download the stock firmware for your device... Flash it via Flashtool
Then again unlock your bootloader
And this time install any supported kernel like Kamarush v3 or Kernel Panic... I mean any prerooted kernel... And after you get root access just switch to latest firmware... And .587 is whole new stock firmware Not kernel...
Sent from my Smultron running CM10 by
---------- Post added at 07:12 AM ---------- Previous post was at 07:07 AM ----------
The Walkman app you tried sucks...
http://forum.xda-developers.com/showthread.php?t=1856186
Flash it... And see the difference :thumbup:
Sent from my Smultron running CM10 by
Click to expand...
Click to collapse
Well i dont know but i cant unlock my bl cause my simcard and phone is a vodafone stuff. And i read that if your phone is a vodafone or tmobile or telenor device than you cant unlock your bl. But after my lesson i repair my os and try again.
Sent from my SK17i using xda premium
Viper0110 said:
U don't necessarily have to install the neo v firmware
u can install GB, root it and then upgrade to .587 with the rooting method you followed
Click to expand...
Click to collapse
Thx. I will try with a stock gb kernel and then change back the latest kernel 587
Sent from my SK17i using xda premium
Well, I managed to root my phone and now i can call anyone without reboot but i havent installed those 2 apps yet. im afraid of having this problem because of those apps :/
but i also havent tried to install that app which you Predator offered me :/ im afraid of having another problem :/ and i also dont know if my phone (sk17i) is capable of running walkman player app or such as walkman player :/ pls correct me if im right or not
Hmmmmm.....
1.flash stock firmware into your XMP...
2.unlock the bootloader...
3.flash any custom kernel that have pre-rooted and CWM....
4.problem solved....
Btw, correct me if i'm wrong but isn't flashing other kernel (neo v in your case) is proof that your phone bootloader is already unlock????
My bootloader is not unlocked because im having a vodafone phone so not an unlocked phone :/ And i heard that unlocking a locked phone is very difficult and dangerous :/ ....

Repair Xperia U baseband - ST25i

I have this phone from a friend that doesnt have baseband, restart it self and works like a turtle. I think that he tried to flash baseband from ST25a and bricked up.
I already flash it with an ST25i TFT with no success. Any idea?
If he simpy made a mistake in baseband, flashing a stock FTF with the correct baseband would fix the issue Try flashing a custom rom and see if there's any difference
Custom ROM includes baseband? I think that only include system or I'm wrong?
Only FTFs contain Baseband. But a mistaken baseband shouldnt cause lagging rom. Odds are something else is the issue. Try with a custom rom and see if lags still persist.. That might help you out
Cheers
I will try but lagging is my less important problem right now, I need to fix baseband first.
Thx.
Finnaly I solved my problem using Update Service software from Sony.
Why I did:
1.- I tried first with Update Service with no success
2.- I downloaded official ICS FTF for ST25i from this topic and flashed it using Flashtool with no success
3.- I tried again using Update Service and worked. Baseband restored
Thx for your help Min3r
Good to hear that bro :thumbup:
Sent from my Xperia U using xda premium
champ4 said:
Finnaly I solved my problem using Update Service software from Sony.
Why I did:
1.- I tried first with Update Service with no success
2.- I downloaded official ICS FTF for ST25i from this topic and flashed it using Flashtool with no success
3.- I tried again using Update Service and worked. Baseband restored
Thx for your help Min3r
Click to expand...
Click to collapse
how can you know if your baseband is lost. i think i have the same problem which is cant switch to wcdma, it always turn to be emergency call only.

[Q] Custom rom in locked xperia U?

So I want to install a custom firmware, but this is my first phone with a locked bootloader so if you'd review what I've gathered about the subject and correct it, it would be grand (I've already flashed a different stock firmware and rooted it btw, but that as far as I've wanted to get until now).
I want to flash JB eXperience 2, and from what I can see this would be the steps:
Load up the rom in the SD storage.
Install a stock b 1.54 rom like this one with flashtool.
Root the rom using flashtool (I'm also unsure abuot this step, saw some weird stuff about rooting this version).
Install this particular CWM with the included bat (this is the bit that makes me a bit uneasy).
Load CWM and flash the custom firmware.
I'm asking because I've read stuff about replacing the B 1.54 kernel by the one on B 1.10 and stuff like that, that doesn't make a lot of sense to me, and also, the experience howto is made for unlocked phones so I'm a bit unsure and I'd really rather ask than have my phone bricked
thanks!
Do this
Flash B.54
Flash B.10 kernel
Root
Flash B.54 kernel
Install cwm
boot into cwm
flash the rom
reboot
thats it
simple
Phrodo_00 said:
So I want to install a custom firmware, but this is my first phone with a locked bootloader so if you'd review what I've gathered about the subject and correct it, it would be grand (I've already flashed a different stock firmware and rooted it btw, but that as far as I've wanted to get until now).
I want to flash JB eXperience 2, and from what I can see this would be the steps:
Load up the rom in the SD storage.
Install a stock b 1.54 rom like this one with flashtool.
Root the rom using flashtool (I'm also unsure abuot this step, saw some weird stuff about rooting this version).
Install this particular CWM with the included bat (this is the bit that makes me a bit uneasy).
Load CWM and flash the custom firmware.
I'm asking because I've read stuff about replacing the B 1.54 kernel by the one on B 1.10 and stuff like that, that doesn't make a lot of sense to me, and also, the experience howto is made for unlocked phones so I'm a bit unsure and I'd really rather ask than have my phone bricked
thanks!
Click to expand...
Click to collapse
.54 stock cannot be rooted by flashtool , use binary's method http://forum.xda-developers.com/showthread.php?t=1886460
u need stock .10 and .54 kernels for ur device and flashtool
CWM is fine
No one noticed it to be in the wrong section?????
Plz report it to mod....
PS: I m xda app so can't report....
Sent from my Xperia Sola using xda app-developers app
@[email protected] said:
No one noticed it to be in the wrong section?????
Plz report it to mod....
PS: I m xda app so can't report....
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Reported.
@[email protected] said:
No one noticed it to be in the wrong section?????
Plz report it to mod....
PS: I m xda app so can't report....
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
wrong section?? then what is the right section?
XperiaMT27 said:
wrong section?? then what is the right section?
Click to expand...
Click to collapse
Too late to post.....
Sent from my Xperia Sola using xda app-developers app
@[email protected] said:
Too late to post.....
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
yeah ...
XperiaMT27 said:
.54 stock cannot be rooted by flashtool , use binary's method http://forum.xda-developers.com/showthread.php?t=1886460
u need stock .10 and .54 kernels for ur device and flashtool
CWM is fine
Click to expand...
Click to collapse
Hi,
I have tried the binary's method but it didn't work either. I've been looking all over the xperia u forum's but I didn't find a solution...
It appears a message saying:
"mount: permission denied (are you root?)"
I am on FW 6.1.1.B.1.54. I also tried to flash it to kernel 6.1.1.B.1.10 but it also appear a message saying "ERROR: Aborted" on flashtool.
It's an Xperia U ICS 4.0.4 Vodafone PT with bootloader locked. Thanks a lot
afonsopires said:
Hi,
I have tried the binary's method but it didn't work either. I've been looking all over the xperia u forum's but I didn't find a solution...
It appears a message saying:
"mount: permission denied (are you root?)"
I am on FW 6.1.1.B.1.54. I also tried to flash it to kernel 6.1.1.B.1.10 but it also appear a message saying "ERROR: Aborted" on flashtool.
It's an Xperia U ICS 4.0.4 Vodafone PT with bootloader locked. Thanks a lot
Click to expand...
Click to collapse
Try this........ Link
See the quote in the thread.....
I have trying to flash the kernel to have the 6.1.1.B.1.10 FW installed, but I'm not able to do it through flashtools... It appeared an ERROR message after pressing the vol - button and connecting it to cell...
Anyway thanks for the help!
Edit: could the problems be because of windows 8? I mean, does flashtool works fine with windows 8? Thanks..
afonsopires said:
I have trying to flash the kernel to have the 6.1.1.B.1.10 FW installed, but I'm not able to do it through flashtools... It appeared an ERROR message after pressing the vol - button and connecting it to cell...
Anyway thanks for the help!
Edit: could the problems be because of windows 8? I mean, does flashtool works fine with windows 8? Thanks..
Click to expand...
Click to collapse
win 8 should not be a problem if u have drivers installed. which version of flashtool u r using.
I'm using the last one: 0.9.10.1 64bits.
I think I have the drivers since when I connect the device, windows asks what do I want to dowith Xperia U. It also works with PCC. But when I used flashtool and I put the device in flash mode, when I connect, it appears a pop up saying windows doesn't recognize the device.
Is this normal?
afonsopires said:
I'm using the last one: 0.9.10.1 64bits.
I think I have the drivers since when I connect the device, windows asks what do I want to dowith Xperia U. It also works with PCC. But when I used flashtool and I put the device in flash mode, when I connect, it appears a pop up saying windows doesn't recognize the device.
Is this normal?
Click to expand...
Click to collapse
u installed drivers in, <installation path>:\Flashtool\drivers, goto the bottom when it starts and install flashmode and fastboot drivers too
Yes, I installed the drives on that folder you pointed.
But the fastboot drivers I think I didn't... How can I do that?
afonsopires said:
Yes, I installed the drives on that folder you pointed.
But the fastboot drivers I think I didn't... How can I do that?
Click to expand...
Click to collapse
they are in the end of the driver installer, just search for them at the last lines
Thanks guys, took me a while but I did it in case anyone search for this, this is the correct way
jatinrungta said:
Flash B.54
Flash B.10 kernel
Root
Flash B.54 kernel
Install cwm
boot into cwm
flash the rom
reboot
Click to expand...
Click to collapse
The kernels where a bit of a pain in the ass to find by their own though.

[Q] Tried lot of things still not able to root Xperia Sola

Tried lot of things from this forum to root Sony Xperia Sola, still no luck.
Like threads below, followed each and every step properly but still not able to root successfully.
http://forum.xda-developers.com/showthread.php?t=2029756
http://forum.xda-developers.com/showthread.php?t=1886460
Device Info (Current):
Sony Xperia Sola
Model - MT27i
Android Ver - 4.0.4
Build Number - 6.1.1.B.1.54
Baseband Version - u8500-49020908-P2H_EC01
Kernel Version - 3.0.8+
[email protected] #1
SMP PREEMPT Mon Oct 15 14:57:07 2012
Pls help me on rooting this phone and also suggest good custom ROM (with link for download) for this phone.
flash kernel from 6.1.1.B.1.10 ftf
nd use root by restore method. nd thn flash kernel from 6.1.1.B.1.54 ftf file
pandyajoe said:
flash kernel from 6.1.1.B.1.10 ftf
nd use root by restore method. nd thn flash kernel from 6.1.1.B.1.54 ftf file
Click to expand...
Click to collapse
I did that but still din't worked.
BTW
What do you mean root by restore method can you elaborate?
If nothing works
Simply unlock the bootloader and flash pre rooted kernel.
Sent from my ST25i using xda app-developers app
crazy.vikas23 said:
If nothing works
Simply unlock the bootloader and flash pre rooted kernel.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Can you or someone give me proper steps on how to unlock the bootloader?
Also link to download Pre rooted Custom ROM or Kernel.
vinodmore said:
Can you or someone give me proper steps on how to unlock the bootloader?
Also link to download Pre rooted Custom ROM or Kernel.
Click to expand...
Click to collapse
u shuld have been able to root; can u post the errors in the command window to have a look at...
XperiaMT27 said:
u shuld have been able to root; can u post the errors in the command window to have a look at...
Click to expand...
Click to collapse
That's what problem is, nothing went wrong no errors its just that after rooting steps it doesn't show SuperUser icon.
I flashed with old firmware 6.1.1.B.1.10 then tried to rooted with Binary's v.29 file and then again flashed firmware with 6.1.1.B.1.54 Still no go.
Guys pls help.
u needed .10 kernel , not FIRMWARE, if u replaced .10 rooted firmware with .54 firmware u will loose root
Install munjeni's recovery from
http://forum.xda-developers.com/showthread.php?t=1934093
And then flash superuser.zip from recovery http://download.clockworkmod.com/test/superuser-2.zip
Sent from my ST25i using xda app-developers app
---------- Post added at 02:51 PM ---------- Previous post was at 02:49 PM ----------
http://unlockbootloader.sonymobile.com/
Sony's official bootloader unlock site. Read instructions before unlocking.
Sent from my ST25i using xda app-developers app
Any help would be appreciated?
Anyhelp would be appreciated
vinodmore said:
Tried lot of things from this forum to root Sony Xperia Sola, still no luck.
Pls help me on rooting this phone and also suggest good custom ROM (with link for download) for this phone.
Click to expand...
Click to collapse
have you tried rooting your phone using flashtool?
Flashtool > Device name (e.g My Mt27) > Root
vinodmore said:
Tried lot of things from this forum to root Sony Xperia Sola, still no luck.
Like threads below, followed each and every step properly but still not able to root successfully.
http://forum.xda-developers.com/showthread.php?t=2029756
Pls help me on rooting this phone and also suggest good custom ROM (with link for download) for this phone.
Click to expand...
Click to collapse
I think you just need to persevere. I took me about 4 hours to get my Sony Sola to root with the above instructions, really hard work as the phone is nigh on unusable after flashing with 6.1.1.B.1.10 .
First Time I did it every thing seemed to go fine, I selected the backup on the Sola as promoted by Root_with_Restore_by_Bin4ry and restarted, then re flashed with 6.1.1.B.1.54 but it wasn't rooted.
I did it all again, but for the next few hours the backup restore would not appear on my phone screen, I would just get a black screen and occasionally i would be able to power off (i say occasionally as after flashing with 10, hardly anything works on the phone, and the touch screen never works), other times i had to use the volume done button and power button to re-start the phone, then would have to get it to start up without booting - just going into the charge screen - so i could eventually power it down to re-flash with 54!
Any way after doing the process over, and over again for about 4 hours, i gave up. Tried again the next morning and it worked first time! I didn't even have to select to restore the back up, or power off on the phone, it all seemed to do it for me!
Just keep trying hopefully you will get there.:good:
1.Try to reflash whole ICS ftf,around 500MB.Means install ICS again,or repair your phone using Sony PC Companion
2.After finish, download these three things http://forum.xda-developers.com/showthread.php?t=2029756
3.Go to computer/local disk c/flashtool,then drivers,install drivers,choose Xperia P,U,sola drivers and fastboot,flashmode
4.After finished installing drivers reboot your computer
5.After reboot flash .10 firmware using flashtool
6.Root using Bin4ry's method
7.You should see Supersu app in app drawer
7.At last flash .54 firmware
8.Done. :laugh:
Hope this method help.

Categories

Resources