[Q] S5839i - Soft brick boot loop? - Galaxy Ace S5830i Q&A, Help & Troubleshooting

Hi all,
I'm trying to recover a Galaxy Ace GT-S5839i, alas to no avail so far. Here are the symptoms
• It was being used to play a game, suddenly became very sluggish, game was exited and the phone shorty after froze on the menu.
• Phone is completely stock, unrooted etc
• Now, the samsung logo shows, the blue screen animation starts, and then reverts back to samsung logo etc. Stuck in a boot loop !
• So far, flashing has only be done with Odin, and without an SDcard present.
• I've tried doing a full reset and wipe partition cache before flashing anything; I've also tried it again a few times in between versions.
Here is what I have done so far :
• Flashed different versions of the OS, all legitimate, from both S5830i and S5839i - CSC, modem and PDA files
• As a last resort (so far), I even tried flashing the bootloader and added the .pit file to flash, both of those being from an "unbrick tutorial".
Quite frankly, this is as far as I can go before asking for advice. After flashing a clean rom with odin, this is the message I get upon reboot :
It then reboots and starts looping again... It this related?
What might the next steps be?
Many thanks for your time,
Tony

mmlbbntr said:
Hi all,
I'm trying to recover a Galaxy Ace GT-S5839i, alas to no avail so far. Here are the symptoms
• It was being used to play a game, suddenly became very sluggish, game was exited and the phone shorty after froze on the menu.
• Phone is completely stock, unrooted etc
• Now, the samsung logo shows, the blue screen animation starts, and then reverts back to samsung logo etc. Stuck in a boot loop !
• So far, flashing has only be done with Odin, and without an SDcard present.
• I've tried doing a full reset and wipe partition cache before flashing anything; I've also tried it again a few times in between versions.
Here is what I have done so far :
• Flashed different versions of the OS, all legitimate, from both S5830i and S5839i - CSC, modem and PDA files
• As a last resort (so far), I even tried flashing the bootloader and added the .pit file to flash, both of those being from an "unbrick tutorial".
Quite frankly, this is as far as I can go before asking for advice. After flashing a clean rom with odin, this is the message I get upon reboot :
It then reboots and starts looping again... It this related?
What might the next steps be?
Many thanks for your time,
Tony
Click to expand...
Click to collapse
If it is in the guarantee time give it for repair and say it is not opening and since you didn't rooted it would not be a speck of resistance from their side I suppose
My deep sympathy with you

Flash xxla4 repacked firmware from the unbrick tutorial thread along with the boot loader file..no need pit.Use Odin 3.04 .I got the exact same error and solved it by the above method.Hope it works for you!
Sent from my GT-S5830i using xda app-developers app

Do a wipe /data. It helped me in every bootloop I had.
Gesendet von meinem GT-S5830i mit dem verfluchten Broadcom Chip

flash pit file
with oddin flash pit file and check reparticion , and then try to reflash you firmware .
thats works for me

Bolydark said:
with oddin flash pit file and check reparticion , and then try to reflash you firmware .
thats works for me
Click to expand...
Click to collapse
Check repartition?
http://forum.xda-developers.com/showthread.php?t=1840645
Q: Do I need to tick repartition?
A: NO! Leave all check-boxes as default!
Q: Really??? Do not tick repartition?
A: REALLY, I told You! Leave it unticked!!! ...And leave bootloader empty as well! COPY THAT?!?!?!
Click to expand...
Click to collapse
Not sure if I dare !

mmlbbntr said:
Check repartition?
http://forum.xda-developers.com/showthread.php?t=1840645
Not sure if I dare !
Click to expand...
Click to collapse
Nothing to be afraid for if you're using the right file.

Well, as it happens, the phone got stolen, so I never got to try the repartition. As least I reconcile in the fact the thieves stole a bricked phone...
Thanks anyhow for the advice and help.

Galaxy ace s5839i hang on samung logo and dont go download mode!
hi i have galaxy ace s5839i that brick and hang on samsung logo and do not any reaxt ive try to go to download mode by press Volup+Voldown+power but it dosent work
by pressing Volup + Homebtn+pwrbtn im go to revovery mode and insall many off custom rom but nothing changed.
any idea?
one more thing
when i try to mount system i see this message:E: failed to mount/system(invalid Argument)
is this a harware problem?
thank and forgive for bad english
---------- Post added at 09:21 PM ---------- Previous post was at 08:47 PM ----------
Hello i have same problem
hi my phone finally fixet bye this:
1-try to go to download mode but phone does not any react but i imagine and press Vol Up and connect the phone to usb and run Odin 1.85
i could not believe but odin show device added!! i choose pit file(galaxy ace s5830i pit file) and uncheaked repartition carefull uncheack it
2 click start >>>>odin says FAILED but when i release battery and re insert it phone go to download mode normally
4>>>>flash with 4 file flash s5839i
done!

samsung galaxy ace s5830i
I have a samsung galaxy s5830i,which has not been rooted.I installed some theme and then my phone started to be sluggish and started to lag..
But now it has been in a bootloop!! It gets switched on and then the samsung logo glows and then it does it again and again... i need help with this asap ..please help me!

Flash013 said:
I have a samsung galaxy s5830i,which has not been rooted.I installed some theme and then my phone started to be sluggish and started to lag..
But now it has been in a bootloop!! It gets switched on and then the samsung logo glows and then it does it again and again... i need help with this asap ..please help me!
Click to expand...
Click to collapse
Your device is soft bricked. You have to restore stock ROM via ODIN.
Also note that themes of a custom ROM doesn't work on stock rom! If you install one of them then your phone will be unstable.
Sent from my GT-S5830i using Tapatalk 2

Sniper Killer said:
Your device is soft bricked. You have to restore stock ROM via ODIN.
Also note that themes of a custom ROM doesn't work on stock rom! If you install one of them then your phone will be unstable.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
How do i restore the stock ROM? I have odin installed..

Flash013 said:
How do i restore the stock ROM? I have odin installed..
Click to expand...
Click to collapse
Use some search button before asking there are threads related to it

Hitesh2626 said:
Use some search button before asking there are threads related to it
Click to expand...
Click to collapse
That was not some answer i was hoping for...

Flash013 said:
That was not some answer i was hoping for...
Click to expand...
Click to collapse
Ok so you are not able to see How to Unbrick/flash thread in Dev section buddy its just to take one step Here that thread http://forum.xda-developers.com/showthread.php?t=1840645
Follow it
Sent from my GT-S5830i using xda app-developers app

hi
i wanted to revert back to stock rom but the issue is that when i loaded the file using odin my phone keeps restarting or looping at the logo
this is the pda i used: S5839IXXNC1_S5839ISFRNC1_SFR.zip
i left other boxes open, like the csc, pit, boot and phone.
i dont know if there are files am supposed to put.
please i need help on what to do...

tosinchib said:
hi
i wanted to revert back to stock rom but the issue is that when i loaded the file using odin my phone keeps restarting or looping at the logo
this is the pda i used: S5839IXXNC1_S5839ISFRNC1_SFR.zip
i left other boxes open, like the csc, pit, boot and phone.
i dont know if there are files am supposed to put.
please i need help on what to do...
Click to expand...
Click to collapse
Boot to recovery and wipe data and then reboot system now

Related

Galaxy s2 Bootloop [solved]

Hi,
I think i have forgot to turn on debbuging mode while flashing stock firmware and now i stuck at bootscreen.I have also turned off F. Reset Time in odin.Any help how i can make my phone alive or is it bricked?Btw i can get into system recovery and download mode
Flash any on click file with odin in download mode
manojcitc said:
Flash any on click file with odin in download mode
Click to expand...
Click to collapse
Hmm.. I I tried but no luck I stuck at boot logo
Sent from my GT-I9300 using xda premium
Should I flash cf root kernel and go into recovery and flash Rom, or send it to Samsung because there is no triangle?
Sent from my GT-I9300 using xda premium
Should I flash cf root kernel and go into recovery and flash Rom, or send it to Samsung because there is no triangle? <br />
<br />
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
If there is no yellow triangle, and your custom binary counter is zero, then just send it to Samsung.
Good luck
Swyped from Samsung Galaxy SII
Try that and after vo into recobery and wipe data,clear cache and flash new rom...
I had faced this problem in for so many times,i always use one click cm9 rom and flash with odin,and make sure that you dont touch any option in odin...
manojcitc said:
Try that and after vo into recobery and wipe data,clear cache and flash new rom...
I had faced this problem in for so many times,i always use one click cm9 rom and flash with odin,and make sure that you dont touch any option in odin...
Click to expand...
Click to collapse
I also had bootloop long time ago, but that was because I didn't made I factory reset. When I need to flash kernel via odin, I need debbuging on. I think I have to send it to Samsung. I am also such a dimbass to forgot to turn debbuging on:sly:
Sent from my GT-I9300 using xda premium
Can I turn on debugging while I can't access my phone. If yes, how?
Sent from my GT-I9300 using xda premium
Problem solved by factory reset in system recovery
Sent from my GT-I9300 using xda premium
I had a boot loop on my galaxy s 2 .. out of nowhere didnt do anything.
It was too weird. I spent time reading lots of forums about this and saw different techniques.
What i did was i flashed back to 2.3.6. Did factory reset. then flashed back to ICS.
I think it happened because of some cache bull****. Just thought i should share.
Boot Loop Solved
I don't know where to post this so I'm posting it here. I have been scouring the internet for HOURS trying to figure how others got out of boot loop so I could get my phone out of it. I have a samsung galaxy s2 i9100g. I was in the process of unrooting it and while rebooting after installing the stock rom BOOM- boot loop to the samsung logo. I tried everything; battery out, in, pushing all combinations of volume(s)+home+power= nothing worked. Finally after a lot of trial and error one thing worked. I unplugged my USB and took the battery out, then while holding the three buttons I put it back in- and suddenly after hours(of trying to get something to happen) I got the download screen. (My phone wouldn't turn off or go into recovery as other suggested). So I downloaded a different stock rom and tried reinstalling via odin a few times but the problem persisted- still boot loop, still only download mode. Then I tried something different. When in download mode I decided to see what would happen if I pushed the volume down to 'reboot'. To my amazement my phone started up and went past the samsung logo for the first time in FOUR HOURS. It went into recovery mode! Then I factory reset it, and restarted it. So keep at if you think your phone is soft bricked or boot looped. I appreciate everyone else's questions/answers that kept me going while trying to figure out something that worked for me. So I'll break it down into steps.
1)unplug USB, take out battery. Hold down volume (holding down the 'down' volume worked for me), home and power button then quickly slide the battery in(while still holding down till the screen comes up). It may take a few times but the 'download mode' screen should come right up.
2)using odin install the stock ROM for your phone
3)when re installation is complete follow step 1 to get into download mode
4)instead of clicking the volume up for download, click down to restart and recovery mode should come up
5)factory reset your phone and reboot
I genuinely hope this helps someone. Nothing worse than rendering your phone useless.
tried it
I'm having the same issue but your trick didn't help. i'm exasperated.
SirenumDev said:
I'm having the same issue but your trick didn't help. i'm exasperated.
Click to expand...
Click to collapse
Same issue how to fix this?
SirenumDev said:
tried it
I'm having the same issue but your trick didn't help. i'm exasperated.
Click to expand...
Click to collapse
yes, same here...my phone is back to the initial screen 'samsung galaxy sII' , with sign at bottom
Me too...
I think we need to flash stock rom as pointed in those guides:
[INDEX] Samsung Galaxy S2 - ROMs, Kernels, MODs, GUIDES
Samsung Galaxy S2 [INDEX] Helpful Information Welcome, this thread has been created to encompass everything you may need for your device. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you"...
forum.xda-developers.com
The problem is I don't find a ODIN that works... links seem to be broken.
I have even risked to download a couple (4) different odin versions and some windows drivers / stock roms from the wild internet (who knows what crap those executables and files may come with), but I had no success with it...
I don't know how we can find trustable files that are required, or at least verify checksums somewhere to be sure that we don't get any unrequested present instead....
Will create or post in there asking for some help I think...

[Q] Samsung Galaxy S2 won't boot. Recovery mode not accessible.

Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11

Odin gets stucked while flashing

Hi guys,
I need your help.I want to help a friend of mine to flash stock jb rom.
When tried to flash the first odin stucked at hidden and the second time at system after changing usb port and rebooting the computer.
I found somewhere that flashing pit file then the firm may work
Is that because he didn't do a factory reset before flashing?
He's got an s3 I9300 with orange rom 4.0.4.
Any help would be appreciated. Thanks
Styrke said:
Hi guys,
I need your help.I want to help a friend of mine to flash stock jb rom.
When tried to flash the first odin stucked at hidden and the second time at system after changing usb port and rebooting the computer.
I found somewhere that flashing pit file then the firm may work
Is that because he didn't do a factory reset before flashing?
He's got an s3 I9300 with orange rom 4.0.4.
Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Flashing a pit will usually hard brick the phone. If odin is correct version, phone is connected properly and you are flashing the right rom for your phone then the worst had already happened, nand failure.
You are missing a lot of information in your post, what does the screen say in download mode and how did you arrive at needing to flash back to stock?
boomboomer said:
Flashing a pit will usually hard brick the phone. If odin is correct version, phone is connected properly and you are flashing the right rom for your phone then the worst had already happened, nand failure.
You are missing a lot of information in your post, what does the screen say in download mode and how did you arrive at needing to flash back to stock?
Click to expand...
Click to collapse
He told me that there is the error Firmware upgrade encountered an issue. Please selcect recovery mode in Kies.
He wanted to upgrade to jb and he said to me that some system apps are missing because its from orange.
Yes im sure that it's the right firmwate its for i9300 took it from samfimware with highest changelog its for Vietnam.
And im using odinv307
Sent from my GT-I9500 using Tapatalk HD
Write out exactly what the phone screen says when in download mode.
Did you disable Kies before the flash, sounds to me like kies interrupted the flash
I can't contact him right now.Is it sure that the phone won't go back to download mode if the pit file was passed without firm ? If not is it possible to recover it with Jtag ?
@slaphead20 yes I killed it from the task manager
Sent from my GT-I9500 using Tapatalk HD
boomboomer said:
Write out exactly what the phone screen says when in download mode.
Click to expand...
Click to collapse
Here is what its mentioned
Odin mode
product name GT I9300
custon binary download Yes ( 1 counts )
current systeme samsung official
system stats custom
Now after flashing the pit file the download mode still can be accessed and when rebooting it shows samsung gt-i9300 logo
Can you tell me what can i do to not getting odin stuck while flashing ?
Sent from my GT-I9500 using Tapatalk HD
Styrke said:
Here is what its mentioned
Odin mode
product name GT I9300
custon binary download Yes ( 1 counts )
current systeme samsung official
system stats custom
Now after flashing the pit file the download mode still can be accessed and when rebooting it shows samsung gt-i9300 logo
Can you tell me what can i do to not getting odin stuck while flashing ?
Sent from my GT-I9500 using Tapatalk HD
Click to expand...
Click to collapse
At what point does it get "stuck"? what exactly does it say in Odin?
rootSU said:
At what point does it get "stuck"? what exactly does it say in Odin?
Click to expand...
Click to collapse
It doesn't say anything.It's just the flashing process does not progress.Latest time the phone was flashed it got stuck while flashing system.img
Sent from my GT-I9500 using Tapatalk HD
Doesn't sound good to me. I would have thought it was a send for repair job.
As you've already flashed a pit I think you have a hard brick, all I can suggest is try this thread:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
I will try that.Thanks all for trying to help.Appreciate it

please help :(

i was using:crying: neat rom until today , this morning i was using it simply looking through apps my phone got stuck and now its in a boot loop ....it does not load after the samsung i9100 appears. and i have flashed other stock roms but it is not working and when i do a wipe factory data it again stucks and i have to put the battery out.
adeeljalali said:
i was using:crying: neat rom until today , this morning i was using it simply looking through apps my phone got stuck and now its in a boot loop ....it does not load after the samsung i9100 appears. and i have flashed other stock roms but it is not working and when i do a wipe factory data it again stucks and i have to put the battery out.
Click to expand...
Click to collapse
seems like you are new on xda, so welcome buddy,
download a firmware from sammobile, you have to register yourself, before you can download anything, dont worry, its free. flash this one file via odin3 v3.04, drop the file to PDA, connect your phone with USB and go to download mode, start just everything from begin.
i have tried all the things but i cannot solve the problems
Have you tried flashing a different Kernet?
True, did you try a other kernel ? Dorimanx v8.34, its good, by my side, its perfect, not bugged etc. flash via odin
adeeljalali said:
i have tried all the things but i cannot solve the problems
Click to expand...
Click to collapse
Do a full wipe. It will get you out of the boot loop (hopefully)
Why does it 'not work'? There's gotta be a reason. Does odin fail when it flashes? If so, click the link in my signature and follow those steps.
And you do have an i9100 right? If you do, flash JB leak using odin. Download it from samfirmware. Its a 3 part firmware, and will wipe your device as it flashes. Give it a go.
i have tried all the things done flashing , stock and custom kernels and also the pit files but the behaviour is still the same ......
There"s no quick fix for this (other than buying a new phone) afraid you're here for the 'long haul'........
Look at @Hopper8 s guide for troubleshooting a failed Odin flash and follow it exactly (all steps) and repeat (all steps) as often as is necessary.........
......Unless you've done irreparable harm by flashing a pit file......
Sent from either my S2 or my W via XDA developers app
and now my device is bricked
Damn.
adeeljalali said:
and now my device is bricked
Click to expand...
Click to collapse
hard or softbricked ?
i think its hard .......because whin i press power button it does not shows any thing the cellphone becomes warm ,from the under side the sim area , but not too warm a mild one........ and i made the jig but accidently put 300 ohms instead of 300k ohm ......i have ruined it further more

[Q] Odin fails to flash stock ROM on bricked S5830i

Hello all,
I am a first-time poster on XDA, but I've read loads on this site and want to thank everyone who contributes to it!
I managed to soft brick my S5830i while flashing a dodgy ROM, and am trying to unbrick. I've been trying to do this by flashing stock firmware through Odin, but I'm not having much luck so far. I keep getting write fails. I've used multi-file firmware (through Odin v1.85/v3.07) and single-file (through Odin v3.07). I've re-downloaded several different versions of firmware, and none have worked (i.e. I don't think it's a file error). I've tried with the cooperve .pit file, tried with the bootloader. I've turned off my antivirus. I've taken the SIM and micro SD cards out of my phone (I've tried taking the battery out as well, but then my drivers stop working!). I can boot into download and recovery, otherwise I'm stuck on a boot loop.
Odin has failed a couple of dozen times with different files, and sometimes just times out while initializing.
I feel like I'm running out of options - if anyone has any fresh ideas, I'd be grateful to hear them!
Thanks very much,
gillyweed said:
Hello all,
I am a first-time poster on XDA, but I've read loads on this site and want to thank everyone who contributes to it!
I managed to soft brick my S5830i while flashing a dodgy ROM, and am trying to unbrick. I've been trying to do this by flashing stock firmware through Odin, but I'm not having much luck so far. I keep getting write fails. I've used multi-file firmware (through Odin v1.85/v3.07) and single-file (through Odin v3.07). I've re-downloaded several different versions of firmware, and none have worked (i.e. I don't think it's a file error). I've tried with the cooperve .pit file, tried with the bootloader. I've turned off my antivirus. I've taken the SIM and micro SD cards out of my phone (I've tried taking the battery out as well, but then my drivers stop working!). I can boot into download and recovery, otherwise I'm stuck on a boot loop.
Odin has failed a couple of dozen times with different files, and sometimes just times out while initializing.
I feel like I'm running out of options - if anyone has any fresh ideas, I'd be grateful to hear them!
Thanks very much,
Click to expand...
Click to collapse
Go into Recovery Mode
Do Wipe data /cache
Flash CWM
Again do Wipe data /cache
Format system
And then try to flash with Odin .
Sent from my GT-S5830i using Tapatalk 2
Error mounting /system
Thanks Hitesh
I had a go at your instructions. I've wiped the data and cache multiple times as you suggested, but I'd not thought of formatting /system, so I hoped it might work. It didn't - it looks like I can't wipe it... I get an error message:
Formatting /system...
Error mounting /system!
Skipping format...
Done
I remember having problems mounting /system because of the ROM which bricked my phone in the first place! Maybe that's the problem? Any thoughts on how to get round it?
gillyweed said:
Thanks Hitesh
I had a go at your instructions. I've wiped the data and cache multiple times as you suggested, but I'd not thought of formatting /system, so I hoped it might work. It didn't - it looks like I can't wipe it... I get an error message:
Formatting /system...
Error mounting /system!
Skipping format...
Done
I remember having problems mounting /system because of the ROM which bricked my phone in the first place! Maybe that's the problem? Any thoughts on how to get round it?
Click to expand...
Click to collapse
Ok try these go to search button right up side
Type it there MultiFormator.zip
You will see one thread of these zip
Go to last page its because on OP download links are not working you ll see on last page ...
After downloading Flash it via CWM
And It will start and will ask you 2 Option
a)Format system to EXT4
B)Format system to RFS
Then you choose RFS
After process get completes
Go into download Mode and then flash STOCK ...
i hope now these will work.
Sent from my GT-S5830i using Tapatalk 2
Hitesh2626 said:
Ok try these go to search button right up side
Type it there MultiFormator.zip
You will see one thread of these zip
Go to last page its because on OP download links are not working you ll see on last page ...
After downloading Flash it via CWM
And It will start and will ask you 2 Option
a)Format system to EXT4
B)Format system to RFS
Then you choose RFS
After process get completes
Go into download Mode and then flash STOCK ...
i hope now these will work.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks again,
In case it helps anyone else following these instructions, I found the tool. Search for "multiformatter" [note spelling]. The thread is number 2012003 and is called "[TOOL] Multi Formatter [EXT4 to RFS vice versa]" - go to page 6 as Hitesh said.
Okay, so I got the tool, flashed it on my phone, formatted everything to RFS. Once it finished I went into download mode, and tried flashing stock... still no luck! I've tried different files, different versions of Odin, different USB ports and it always gets stuck at initializing and hangs.
Any thoughts? I'm really grateful for the help so far.
gillyweed said:
Thanks again,
In case it helps anyone else following these instructions, I found the tool. Search for "multiformatter" [note spelling]. The thread is number 2012003 and is called "[TOOL] Multi Formatter [EXT4 to RFS vice versa]" - go to page 6 as Hitesh said.
Okay, so I got the tool, flashed it on my phone, formatted everything to RFS. Once it finished I went into download mode, and tried flashing stock... still no luck! I've tried different files, different versions of Odin, different USB ports and it always gets stuck at initializing and hangs.
Any thoughts? I'm really grateful for the help so far.
Click to expand...
Click to collapse
Oh see our all steps are correct but now you have to check your firmware buddy...
Go to sammobile and download latest firmware and spit it by using these guide http://forum.xda-developers.com/showthread.php?t=1840645
And try to flash it ...
And follow that Video also provided in Guide
Sent from my GT-S5830i using Tapatalk 2
Up and running
Hitesh2626 said:
Oh see our all steps are correct but now you have to check your firmware buddy...
Go to sammobile and download latest firmware and spit it by using these guide http://forum.xda-developers.com/showthread.php?t=1840645
And try to flash it ...
And follow that Video also provided in Guide
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Just to get closure on this thread,
I continued trying everything I could to flash different versions of firmware through Odin. It was a big help to format the system in RFS, so thanks for pointing that out. After that fix, Odin was still unable to communicate with my device... but after realising that the underlying problem was now dealt with, I moved on to flashing through CWM. I didn't manage to get anything done with Odin - might be my (only!) USB cable, or my USB ports, or any of the other millions things that could go wrong with it. But I successfully flashed AndroidScream in recovery and am up and running.
Thanks again Hitesh, and also to the whole XDA community!
gillyweed said:
Just to get closure on this thread,
I continued trying everything I could to flash different versions of firmware through Odin. It was a big help to format the system in RFS, so thanks for pointing that out. After that fix, Odin was still unable to communicate with my device... but after realising that the underlying problem was now dealt with, I moved on to flashing through CWM. I didn't manage to get anything done with Odin - might be my (only!) USB cable, or my USB ports, or any of the other millions things that could go wrong with it. But I successfully flashed AndroidScream in recovery and am up and running.
Thanks again Hitesh, and also to the whole XDA community!
Click to expand...
Click to collapse
Hi
I am having the same problem with odin (3.7 and 1.84), its just not flashing the stock roms. I am running out of ideas and getting desperate. When you say you "formatted the system in RFS" do you mean you factory wiped your phone? If that is the case then no luck for me
Here's the Solution,
[Guide] Know your Device: Galaxy Ace GT-S5830i | Root, Odin, CWM, ROM List & More...
:victory:
My friend managed to brick her ace in the same way tried evry possible thong no success ...
Can you provied a short description about how did you bring ypur ace back to life ? Amd amy way to flash cwm on ace - i via odin ? Please help asap... Its been a month now... Help needed please
NEWBIE
DEVICE - ACE PLUS GT-S7500
ROM - CM 11 kitkat omni rom speedmod
MODS - A FEW...
wanna learn sumthing new each day
zacg.rishabh said:
My friend managed to brick her ace in the same way tried evry possible thong no success ...
Can you provied a short description about how did you bring ypur ace back to life ? Amd amy way to flash cwm on ace - i via odin ? Please help asap... Its been a month now... Help needed please
NEWBIE
DEVICE - ACE PLUS GT-S7500
ROM - CM 11 kitkat omni rom speedmod
MODS - A FEW...
wanna learn sumthing new each day
Click to expand...
Click to collapse
...
A Galaxy Ace Plus is not the equivalent of GT-S5830i. They most probably don't have the same chipset either, so DON'T TRY FLASHING GT-S5830i STUFF ON YOUR GT-S7500.
Instead, seek help on the relevant forums, and Google is also your friend.
Dude... ? I said my FRIEND has an ACE GT S5380i and she BRICKED her ace she asked me to help her out so... Please help... Me out...
NEWBIE
DEVICE - ACE PLUS GT-S7500
ROM - CM 11 kitkat omni rom speedmod
MODS - A FEW...
wanna learn sumthing new each day
zacg.rishabh said:
Dude... ? I said my FRIEND has an ACE GT S5380i and she BRICKED her ace she asked me to help her out so... Please help... Me out...
NEWBIE
DEVICE - ACE PLUS GT-S7500
ROM - CM 11 kitkat omni rom speedmod
MODS - A FEW...
wanna learn sumthing new each day
Click to expand...
Click to collapse
herp derp
What did she do to brick her phone? A ROM? A kernel?
And does she have a backup of the stock ROM?
zacg.rishabh said:
Dude... ? I said my FRIEND has an ACE GT S5380i and she BRICKED her ace she asked me to help her out so... Please help... Me out...
NEWBIE
DEVICE - ACE PLUS GT-S7500
ROM - CM 11 kitkat omni rom speedmod
MODS - A FEW...
wanna learn sumthing new each day
Click to expand...
Click to collapse
Just Follow these TUT
Above all, do you have the Samsung USB drivers installed?
For CWM, there is a flashable temporary CWM, and several custom kernels already have CWM as the default recovery.
Please post the links as i dont know which thread to search for as i m nt familiar with d device
NEWBIE
DEVICE - ACE PLUS GT-S7500
ROM - CM 11 kitkat omni rom speedmod
MODS - A FEW...
wanna learn sumthing new each day
WORKED!!
Hitesh2626 said:
Go into Recovery Mode
Do Wipe data /cache
Flash CWM
Again do Wipe data /cache
Format system
And then try to flash with Odin .
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
JESUS ****ING CHRIST YOU SAVED MY PHONE! THANKS! SO MUCH! :laugh::laugh::laugh::laugh:
Strucked in super soft brick
Recently i flashed cm 11 after that i tried to flash stock rom via odin but failed i tried every thing boot loader,pit,single pakage file but failed help guys
I am like strucked to my stock ro whenever i try to flash any rom it just shows sucessful message and then freeze on samsung logo nd then i have to restore my stock rom ...thanks in advance
Sent from my GT-S5830i
satvinder siddhu said:
I am like strucked to my stock ro whenever i try to flash any rom it just shows sucessful message and then freeze on samsung logo nd then i have to restore my stock rom ...thanks in advance
Sent from my GT-S5830i
Click to expand...
Click to collapse
well I established a working scenario for your case and other similar symptoms @ post #4 of this topic start from the line "1. Download one of the newest non wipe,,,,,,,," and do exactly as i said < follow through all of the instruction >

Categories

Resources