ok, so i have st25i, with stock as well as Zperiance v1 as roms... n munjeni n sliding XU kernels.
Firstly thanx to these guys!
i tried flashing 213 FXP but it gets stuck on boot just after free Xperia logo in the CM9 LOGO...
so i downloaded FXP 214 it worked when i flashed it over Zperiance v1 with kernels of both type(munjeni & Sliding XU) but the Network service is not available plus messaging keeps crashing and many more things crash like few of the setting, mobile settongs.
i even flash gapps n i did not see any bug report on the forums like this.
and when i flashed over stock ics 1.54 st25i with either of the kernels, it again gets stucks on that CM9 boot logo.
now ppl where am i going wrong??
help please
i am cleaning dalvik and partition cache but i dont wana do factory reset as i no it should work without it.
u need to first clean install b.54
through flashtool
root
install cwm
then flash kernel provided in zip
then install fxp214
flasg gapps
wipe data/factory reset
reboot
Sent from my Xperia U using Tapatalk 2
questions
drsanket_xperia_u said:
u need to first clean install b.54
through flashtool
root
install cwm
then flash kernel provided in zip
then install fxp214
flasg gapps
wipe data/factory reset
reboot
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
does factory reset erase all my backed up restoration points??
n how do i flash?
thru CWM or flashtool..?
Subhash Mukherjee said:
does factory reset erase all my backed up restoration points??
n how do i flash?
thru CWM or flashtool..?
Click to expand...
Click to collapse
Factory reset does not erase data on SD card....Your CWM backups are safe.Factory rest just formats /data partition i.e you lose all your third party apps and customizations(contacts and settings)......Just follow drsanket's instructions and you will be back on track.
---------- Post added at 01:18 PM ---------- Previous post was at 01:12 PM ----------
BTW which fw are you using??B.54 generic(361 MB) or vodafone branded(651 MB).......
AKA#1 said:
Factory reset does not erase data on SD card....Your CWM backups are safe.Factory rest just formats /data partition i.e you lose all your third party apps and customizations(contacts and settings)......Just follow drsanket's instructions and you will be back on track.
---------- Post added at 01:18 PM ---------- Previous post was at 01:12 PM ----------
BTW which fw are you using??B.54 generic(361 MB) or vodafone branded(651 MB).......
Click to expand...
Click to collapse
621 mb... b54 for sure bt lost track if it was voda branded... does that affect it too??
Subhash Mukherjee said:
621 mb... b54 for sure bt lost track if it was voda branded... does that affect it too??
Click to expand...
Click to collapse
yup its voda branded... just checked...
Subhash Mukherjee said:
621 mb... b54 for sure bt lost track if it was voda branded... does that affect it too??
Click to expand...
Click to collapse
I am not sure,buddy.But I would advice you to download generic firmware if your data plan isn't limited..I have been using vodafone firmware and been experiencing minor problems (general lagginess and mobile data)...
---------- Post added at 01:40 PM ---------- Previous post was at 01:35 PM ----------
Subhash Mukherjee said:
yup its voda branded... just checked...
Click to expand...
Click to collapse
Did you follow drsanket's instructions??Its a pretty good guide and should have solved your problems.....
AKA#1 said:
I am not sure,buddy.But I would advice you to download generic firmware if your data plan isn't limited..I have been using vodafone firmware and been experiencing minor problems (general lagginess and mobile data)...
Click to expand...
Click to collapse
so, indian firmware dn? i'll switch to the indian ftf...
do u av the link for the generic ftf?
AKA#1 said:
I am not sure,buddy.But I would advice you to download generic firmware if your data plan isn't limited..I have been using vodafone firmware and been experiencing minor problems (general lagginess and mobile data)...
---------- Post added at 01:40 PM ---------- Previous post was at 01:35 PM ----------
Did you follow drsanket's instructions??Its a pretty good guide and should have solved your problems.....
Click to expand...
Click to collapse
i'll try that now thanx man....
Subhash Mukherjee said:
so, indian firmware dn? i'll switch to the indian ftf...
do u av the link for the generic ftf?
Click to expand...
Click to collapse
I can't post external links(I'm new here,Sorry).Please look in the Xperia U Android Development pipi14's thread..Can you outline the steps you followed to install the ROM??
Related
Hi,
I'm new on this forum and have one question.
I have ST15, bootloader is not unlocked (not allowed when I check in configuration), and fhone is rooted and upgraded to 4.1.B.0.431.
I want to know can I load ExMIUI since I can not change kernel on the ohone,.
Can ExMIUI work with stock kernel?
Tnx
yes u can install ExMIUI with stock kernel but your phone must b rooted and cwm must be installed
---------- Post added at 01:58 PM ---------- Previous post was at 01:48 PM ----------
instruction + download link is available here http://forum.xda-developers.com/showthread.php?t=1578109
usman_fareed said:
yes u can install ExMIUI with stock kernel but your phone must b rooted and cwm must be installed
---------- Post added at 01:58 PM ---------- Previous post was at 01:48 PM ----------
instruction + download link is available here http://forum.xda-developers.com/showthread.php?t=1578109
Click to expand...
Click to collapse
thanks, that is all I wanted to know.
It worreied me because it said that it works with krs kernel...
:good:
I've installed ExMIUI with stock rom, but my phone chrashes afer every call. It gives info that app android stopped working, it said like the sim is not in and then asks for pin. after I insert the sim pin it is ok (untill the next call)
Anybody has an idea what is wrong?
tnx
Dario101 said:
I've installed ExMIUI with stock rom, but my phone chrashes afer every call. It gives info that app android stopped working, it said like the sim is not in and then asks for pin. after I insert the sim pin it is ok (untill the next call)
Anybody has an idea what is wrong?
tnx
Click to expand...
Click to collapse
try full wipe
data,cache partition
advance=>dalvik cache
mounts and storage=>format system(do not format sdcard please)
and then install zip through CWM...
if any problem then try to flash kamrush's v3 kernel and boot your phone!!!
so frnds.. listen..
i flash my xperia u with ics(6.1.1.B.1.54).. and then i go to recovery mode and install(install from zip) this one
http://forum.xda-developers.com/showthread.php?t=1717270
but after that when i boot my phone.. it keeps restarting.. any help??
http://forum.xda-developers.com/showthread.php?t=2023135
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
If ur bootloader is unlocked then
Just flash another stock ics based kernel
It will do the job
U flashed gb kernel on ics
drsanket_xperia_u said:
http://forum.xda-developers.com/showthread.php?t=2023135
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
If ur bootloader is unlocked then
Just flash another stock ics based kernel
It will do the job
U flashed gb kernel on ics
Click to expand...
Click to collapse
You flashed GB kernel on ICS... Follow the thread given by drsanket.
Need Kernel
matood said:
You flashed GB kernel on ICS... Follow the thread given by drsanket.
Click to expand...
Click to collapse
drsanket_xperia_u said:
http://forum.xda-developers.com/showthread.php?t=2023135
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
If ur bootloader is unlocked then
Just flash another stock ics based kernel
It will do the job
U flashed gb kernel on ics
Click to expand...
Click to collapse
hey can u plz give me a kernel(performance+battery saver) for ics..
cant search it...
shirish893 said:
hey can u plz give me a kernel(performance+battery saver) for ics..
cant search it...
Click to expand...
Click to collapse
Try searching for sliding xu in xperia u development thread
Sent from my ST25i using Tapatalk 2
Link plz
drsanket_xperia_u said:
Try searching for sliding xu in xperia u development thread
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Hey can u plzzzzz give me the link of it.. plz plz plzzzzzzzzzzzzzz
http://forum.xda-developers.com/showthread.php?t=2204050
This is it bro, you take Stock version, not CM and you are ready to go.
Thnx.. but need more help
mirost1 said:
http://forum.xda-developers.com/showthread.php?t=2204050
This is it bro, you take Stock version, not CM and you are ready to go.
Click to expand...
Click to collapse
thnx for all this..
but i want to ask that after installing ics... i cant root from flast tool...
What to do?
shirish893 said:
thnx for all this..
but i want to ask that after installing ics... i cant root from flast tool...
What to do?
Click to expand...
Click to collapse
If you choose to use this Slising kernel, it has autoroot function build in. In the same thread there is a flashable SU, after flashing it you will be rooted.
EDIT: Look at the second post - rooting your device.
mirost1 said:
If you choose to use this Slising kernel, it has autoroot function build in. In the same thread there is a flashable SU, after flashing it you will be rooted.
EDIT: Look at the second post - rooting your device.
Click to expand...
Click to collapse
hmm... ok then... so flashing the kernel u said right now.. but can i flash the kernel u gave before after flashing this?
shirish893 said:
hmm... ok then... so flashing the kernel u said right now.. but can i flash the kernel u gave before after flashing this?
Click to expand...
Click to collapse
Download both of them. Put the SU in your phone memory, Fastboot or flash the kernel, reboot in recovery and flash SU. Thats it.
mirost1 said:
If you choose to use this Slising kernel, it has autoroot function build in. In the same thread there is a flashable SU, after flashing it you will be rooted.
EDIT: Look at the second post - rooting your device.
Click to expand...
Click to collapse
There's no slising kernel...
mirost1 said:
Download both of them. Put the SU in your phone memory, Fastboot or flash the kernel, reboot in recovery and flash SU. Thats it.
Click to expand...
Click to collapse
understud what u said..,
but when i flash that stock kernel my phone doesn't boot....
now say plz
Anyone tried this rom already?
Did you experienced any wi-fi problems?
I've flashed it and wi-fi doesn't work at all:/
Everything works fine...
bluedolphin said:
Everything works fine...
Click to expand...
Click to collapse
Does this ROM include the KNOK security ferature of Samasung ??
Can you Root it ??
Tilagoon said:
Does this ROM include the KNOK security ferature of Samsung ??
Can you Root it ??
Click to expand...
Click to collapse
Yes. Yes (begin whit 1.80). See here: http://forum.xda-developers.com/showthread.php?t=2574953
---------- Post added at 09:58 AM ---------- Previous post was at 09:52 AM ----------
MarcosNK said:
Anyone tried this rom already?
Did you experienced any wi-fi problems?
I've flashed it and wi-fi doesn't work at all:/
Click to expand...
Click to collapse
1- Yes
2- No
3- Before flash have You wiped data+cache+dalvik on Customer Recovery? (May be also format system on mount and storage).
Whit recovery on screen force Download Mode and flash the Rom.
Hi guys.
I successfully boot android n preview 3 in our device with flashing ftf from z3 and flashing kernel from xda.But I have 3 problem
-I can't flash recovery after ftf.It says "FAILED (remote: partition table doesn't exist)"
-I flashed original baseband from Z2 ftf but still no sim error.
-THERE IS A REALLY ANNOYING POINTER IN SCREEN AND I CANNOT REMOVE IT I NEED TO USE MY FINGER LIKE A MOUSE(i tried developer option show touches etc didn't work)
-Getting camera not found error
After that everything works like a charm(GPS,WiFi,Bluetooth etc.) how can I solve the problems.
Thanks
yigiitkaan said:
Hi guys.
I successfully boot android n preview 3 in our device with flashing ftf from z3 and flashing kernel from xda.But I have 3 problem
-I can't flash recovery after ftf.It says "FAILED (remote: partition table doesn't exist)"
-I flashed original baseband from Z2 ftf but still no sim error.
-THERE IS A REALLY ANNOYING POINTER IN SCREEN AND I CANNOT REMOVE IT I NEED TO USE MY FINGER LIKE A MOUSE(i tried developer option show touches etc didn't work)
-Getting camera not found error
After that everything works like a charm(GPS,WiFi,Bluetooth etc.) how can I solve the problems.
Thanks
Click to expand...
Click to collapse
Can you tell me step by step how u did , i like to give it a try.
and which kernel u used?
azam426 said:
Can you tell me step by step how u did , i like to give it a try.
and which kernel u used?
Click to expand...
Click to collapse
---I backed up my Phone and wipe everything expect Micro sd---
-First i flashed this ftf https://drive.google.com/file/d/0B8cCnBv81XJ0cmZVRlFBQXpYMjQ/view?usp=sharing without flashing rpm.sin
-Then i flashed this kernel from fastboot http://forum.xda-developers.com/xperia-z2/development/kernel-android-n-preview-3-t3439811
-It booted with no problem without sim card
It worked.. and fast too..
If a good dev have time to port, it will be a good rom.
only few bugs there.. like touch, wifi, camera..
azam426 said:
It worked.. and fast too..
If a good dev have time to port, it will be a good rom.
only few bugs there.. like touch, wifi, camera..
Click to expand...
Click to collapse
Yes my friend i believe someone going to port to us.
azam426 said:
It worked.. and fast too..
If a good dev have time to port, it will be a good rom.
only few bugs there.. like touch, wifi, camera..
Click to expand...
Click to collapse
The touch doesn't work?
hamzxoxo said:
The touch doesn't work?
Click to expand...
Click to collapse
It's working
Good to know that my kernel boot
If someone can create a topic dedicated to the port can help you in you can
@Brandon Nel I was working also in rom
---------- Post added at 07:37 PM ---------- Previous post was at 07:28 PM ----------
yigiitkaan said:
Hi guys.
I successfully boot android n preview 3 in our device with flashing ftf from z3 and flashing kernel from xda.But I have 3 problem
-I can't flash recovery after ftf.It says "FAILED (remote: partition table doesn't exist)"
-I flashed original baseband from Z2 ftf but still no sim error.
-THERE IS A REALLY ANNOYING POINTER IN SCREEN AND I CANNOT REMOVE IT I NEED TO USE MY FINGER LIKE A MOUSE(i tried developer option show touches etc didn't work)
-Getting camera not found error
After that everything works like a charm(GPS,WiFi,Bluetooth etc.) how can I solve the problems.
Thanks
Click to expand...
Click to collapse
Not flash full fw Z3
the ROM needs to be ported to Z2, so will running kernel and recovery
Also give preference in porting Android N Preview 3, people have reported various problems Z3
Gustavo RD78 said:
Good to know that my kernel boot
If someone can create a topic dedicated to the port can help you in you can
@Brandon Nel I was working also in rom
---------- Post added at 07:37 PM ---------- Previous post was at 07:28 PM ----------
Not flash full fw Z3
the ROM needs to be ported to Z2, so will running kernel and recovery
Also give preference in porting Android N Preview 3, people have reported various problems Z3
Click to expand...
Click to collapse
Thanks i getting now.I hope someone port it with problems they aren't so important for me
As for D6502 user i can flash ftf bt after flashing @Gustavo RD78
Kernel phone doesn't boot ?
Sent from my D6502 using XDA-Developers mobile app
help
yigiitkaan said:
---I backed up my Phone and wipe everything expect Micro sd---
-First i flashed this ftf https://drive.google.com/file/d/0B8cCnBv81XJ0cmZVRlFBQXpYMjQ/view?usp=sharing without flashing rpm.sin
-Then i flashed this kernel from fastboot http://forum.xda-developers.com/xperia-z2/development/kernel-android-n-preview-3-t3439811
-It booted with no problem without sim card
Click to expand...
Click to collapse
how do i exclude flashing rpm.sin??
madscientistdam said:
how do i exclude flashing rpm.sin??
Click to expand...
Click to collapse
From flashtool exclude section
help
yigiitkaan said:
From flashtool exclude section
Click to expand...
Click to collapse
when i fastboot flash boot boot.img its not flashing the kernel and i renamed it to boot.img like the instruction says what am i doing wrong?
madscientistdam said:
when i fastboot flash boot boot.img its not flashing the kernel and i renamed it to boot.img like the instruction says what am i doing wrong?
Click to expand...
Click to collapse
What is the error saying?
help
yigiitkaan said:
From flashtool exclude section
Click to expand...
Click to collapse
in my flashtool exclude section it only says BOOT BUNDLE,PARTTION,KERNEL,FOTA ,BASEBAND,SYATEM,ELABEL it doesnt have an option to exclude rpm.sin help please
---------- Post added at 06:08 PM ---------- Previous post was at 05:48 PM ----------
when i fastboot flash boot boot.img it says error cannot load boot.img
---------- Post added at 06:23 PM ---------- Previous post was at 06:08 PM ----------
yigiitkaan said:
What is the error saying?
Click to expand...
Click to collapse
can u help me sir yes or no??
madscientistdam said:
in my flashtool exclude section it only says BOOT BUNDLE,PARTTION,KERNEL,FOTA ,BASEBAND,SYATEM,ELABEL it doesnt have an option to exclude rpm.sin help please
---------- Post added at 06:08 PM ---------- Previous post was at 05:48 PM ----------
when i fastboot flash boot boot.img it says error cannot load boot.img
---------- Post added at 06:23 PM ---------- Previous post was at 06:08 PM ----------
can u help me sir yes or no??
Click to expand...
Click to collapse
My flashtool version is 9.20.0.0 i guess you need it bro.I haven't an idea for fastboot problem
EVERYONE. I HAVE FOUND A SOLUTION FOR THE POINTER! Try deleting the pointer file in the System folder! (I dont know where the file specificlly is tho. )
Brandon Nel said:
EVERYONE. I HAVE FOUND A SOLUTION FOR THE POINTER! Try deleting the pointer file in the System folder! (I dont know where the file specificlly is tho. )
Click to expand...
Click to collapse
You cannot even root it without recovery how you think found pointer file if it's really "exist"
yigiitkaan said:
You cannot even root it without recovery how you think found pointer file if it's really "exist"
Click to expand...
Click to collapse
Everything that happens in a phone is ALWAYS in it's root folders, otherwise it wouldn't exist. Have you tried rooting or installing twrp using ADB??
---------- Post added at 04:31 AM ---------- Previous post was at 04:23 AM ----------
EVERYONE. Try deleting the 'pointer_arrow.png' file in system/framework/framework-res.apk/Res/Drawable-mdpi or something. I heard that that annoying pointer file is located there somewhere. Someone please extract the Android N ftf, decompile framework-res.apk, and delete that pointer_arrow.png file. SOLVED. (If it works. XD)
Brandon Nel said:
Everything that happens in a phone is ALWAYS in it's root folders, otherwise it wouldn't exist. Have you tried rooting or installing twrp using ADB??
---------- Post added at 04:31 AM ---------- Previous post was at 04:23 AM ----------
EVERYONE. Try deleting the 'pointer_arrow.png' file in system/framework/framework-res.apk/Res/Drawable-mdpi or something. I heard that that annoying pointer file is located there somewhere. Someone please extract the Android N ftf, decompile framework-res.apk, and delete that pointer_arrow.png file. SOLVED. (If it works. XD)
Click to expand...
Click to collapse
I dont think So..
I think it has something to do with the *.idc files inside /system/usr/idc/
probably need to port *.idc files..
Stock DEODEXED Rom for J700Pshould work on virgin boost an sprint
Made using ASSAYYED Kitchen Deodexed an some tweaks !
Rom is back thank you ! If anyone would like me to make a new build let me know !
https://mega.nz/#!bF0nDbwB!nFM9dntPLRjinR8agwHFjQWumyQ_tBztjSGkZEfg6dU
Twrp 3.1.1_1
install factory reset wipe system Flash zip
2 wipe casha an dalvilk casha
3 Reboot an give it 5 or 6 minutes to boot
setup takes some time !
let me know how it work for you !!
New Build is up same install process !
#2 Build .
https://mega.nz/#!7ZdUFAjS!ghP86xhPZZmpqe33fXqicneWs-2BGdkKTGAYHXUje5M enjoy !
0K everyone adding new build today july 2, 2018 !
it is my best build yet for this phone I hope everyone likes it !
same install as always use the latest twrp recovery an enjoy !
https://mega.nz/#!OF1HgIjD!0uptz-PRYkH1Phbez1uAjLbbkD2tCGJehxupHKvnO8E
Firmware link SAMMOBILE web site !
https://www.google.com/url?sa=t&rct...j7/SM-J700P/&usg=AOvVaw13zFWmOmtVPugdsngwbELz
Yes I put this link for anyone that has a problem with my Rom ! These file flashed threw Odin should restore your phone back to stock on Sprint boost an virgin mobile ! This is your safety net if you did not make a backup !
Can i flash this on
Virgin mobile Galaxy J700P
TJj33p3rz said:
Can i flash this on
Click to expand...
Click to collapse
Don't know if it will work with the old modem in that build ! But you can download the firmware at the bottom of my first post an flash it atfer flashing that threw Odin !
peter couniaz said:
Don't know if it will work with the old modem in that build !
Click to expand...
Click to collapse
Ok thank you.
---------- Post added at 01:07 AM ---------- Previous post was at 12:43 AM ----------
peter couniaz said:
Don't know if it will work with the old modem in that build ! But you can download the firmware at the bottom of my first post an flash it atfer flashing that threw Odin !
Click to expand...
Click to collapse
Sorry to clog up your thread but can you point me in the right direction to which rom i could use?
Virgin mobile Galaxy J700P
TJj33p3rz said:
Ok thank you.
---------- Post added at 01:07 AM ---------- Previous post was at 12:43 AM ----------
Sorry to clog up your thread but can you point me in the right direction to which rom i could use?
Click to expand...
Click to collapse
You can use this Rom you Just have to update your firmware the firmware is in my first post on this thread or you can try minz1 lineage 14.1 Rom it's up to you
peter couniaz said:
You can use this Rom you Just have to update your firmware the firmware is in my first post on this thread or you can try minz1 lineage 14.1 Rom it's up to you
Click to expand...
Click to collapse
Ok thanks ive been away from all this for awhile didnt want to brink,thanks again.
peter couniaz said:
stock deodexed rom for j700pshould work on virgin boost an sprint
made using assayyed kitchen deodexed an some tweaks !
Made from j700pvpu2bqj2 firmware 7.1.1
download
https://mega.nz/#!bf0ndbwb!nfm9dntplrjinr8agwhfjqwumyq_tbztjsgkzefg6du
twrp 3.1.1_1
install factory reset wipe system flash zip
2 wipe casha an dalvilk casha
3 reboot an give it 5 or 6 minutes to boot
setup takes some time !
Let me know how it work for you !!
An a big thanks to jrock77420 for his firmware link !!!
https://drive.google.com/drive/folders/1ap1juibo37rxrkesafsl1cybstm76f0b?usp=sharing
Click to expand...
Click to collapse
--- only 700p?
Virgin mobile Galaxy J700P
brijaquin said:
--- only 700p?
Click to expand...
Click to collapse
Yes just Galaxy J700P
peter couniaz said:
Yes just Galaxy J700P
Click to expand...
Click to collapse
Thanks
brijaquin; said:
Thanks
Click to expand...
Click to collapse
Flash custom Rom on my sm-j700p , easy install in twrp recovery.
Sent from my SM-J700P using Tapatalk
peter couniaz said:
Yes just Galaxy J700P
Click to expand...
Click to collapse
I just flash your Rom with twrp , no hangs , no errors, good fast stock rom.
I will leave this OS on my phone until someone build a better one .
Sent from my SM-J700P using Tapatalk
Do i need to flash all 5 of those file in the bottom link?Usually the tar is in one.
I installed this everything works great but I can't turn on wifi or wifi tethering
Virgin mobile Galaxy J700P
lordviper666 said:
I installed this everything works great but I can't turn on wifi or wifi tethering
Click to expand...
Click to collapse
Did you do all the steps like wipe system after factory reset an wipe casha an dalvilk after flashing ZIP if not restore you backup an try again !
lordviper666 said:
I installed this everything works great but I can't turn on wifi or wifi tethering
Click to expand...
Click to collapse
Same thing here gonna try again.
---------- Post added at 09:04 PM ---------- Previous post was at 08:49 PM ----------
TJj33p3rz said:
Do i need to flash all 5 of those file in the bottom link?Usually the tar is in one.
Click to expand...
Click to collapse
I think this is my problem there is 5 files in the link how do i do all 5 in odin?I cant find tbem when im in odin on my pc but they are there lime .tar.rar
---------- Post added at 09:48 PM ---------- Previous post was at 09:04 PM ----------
I feel like an idiot now lol ignore my post,sucks getting old
My pc must be acting dumb i try to flash the stock files posted in odin it always fails,which version of odin are you guys using?
Virgin mobile Galaxy J700P
TJj33p3rz said:
My pc must be acting dumb i try to flash the stock files posted in odin it always fails,which version of odin are you guys using?
Click to expand...
Click to collapse
Did you flash all four files threw Odin 3.12.5 an did you place them in the Odin folder ?
Yeah I always wipe everything. With only one Rom did it work and then it wouldn't switch to data when WiFi was off. I assume I missed something will search more when I get home from work tonight. Could even be the phone I bought it used on eBay
Sent from my SM-J700P using xda premium
peter couniaz said:
Did you flash all four files threw Odin 3.12.5 an did you place them in the Odin folder ?
Click to expand...
Click to collapse
I opened odin an put all files in the correct place an clicked go
---------- Post added at 02:58 AM ---------- Previous post was at 02:57 AM ----------
TJj33p3rz said:
I opened odin an put all files in the correct place an clicked go
Click to expand...
Click to collapse
All files in odin folder?
TJj33p3rz said:
I opened odin an put all files in the correct place an clicked go
---------- Post added at 02:58 AM ---------- Previous post was at 02:57 AM ----------
All files in odin folder?
Click to expand...
Click to collapse
I had success using 3.10 Odin, in cfroot zip file for sm-j700p, there is version you want. If you are using Odin you want (1) .md5 file to put in AP slot and that it, if it doesn't flash you have a wrong or corrupt file.
Sent from my SM-J727P using Tapatalk