Related
Phone Details
Motorola Atrix 4G AT&T (bought around June 2011 Time frame)
System Version
4.5.91.MB860.ATT.en.US
Model Number
MB860
Android Version
2.34
Baseband Version
N_01.77.30P
Webtop Version
WT-1.2.0-110
Kernel Version
[email protected] #2
Build Number
4.5.91
I am absolutely new to this Android ROM installs on the phones. Though I decided to install this ROM I absolutely didn’t’ have any idea how to proceed. As a beginner I started doing the following in order.
Download and Keep the CM7 ROM
1. Downloaded Ba2F.zip to my laptop
2. Downloaded and Installed the Motorola USB drivers MotoHelper_2.0.53_Driver_5.2.0.EXE
3. Connect the Atrix and set the USB option on the phone to “USB Mass Storage”
4. Copy both BaTF.zip as well as the Extracted one to Phone internal storage as well as the Ext-SDcard on the phone
Download ROM Manager and Titanium Backup
1. Downloaded both from Android Market (ROM Manager Pro and Titanium Backup Free Version)
2. Both Apps won’t open because I had not ROOTED the phone
Root the Phone
1. I used “Pete's Motorola Root Tools.EXE” file to ROOT the phone
2. Followed step by step as mentioned here http://www.androidauthority.com/how-to-root-motorola-atrix-4g-35233/
Flash ClockworkMod Recovery
1. I used ROM Manager to do this as when you try to do anything in ROM manager it prompts to do this. The version of this is 5.0.2.0 ( I am not sure what is this for why we have to do this)
Unlocking the Bootloader
1. What I learned is, to unlock the bootloader, we have to first flash the phone with the SBF file
a. Installed RSDLite5.3.1.msi
b. Loaded the file 4547-fix-try2.sbf (Downloaded from http://forum.xda-developers.com/showthread.php?t=1136261)
c. Boot the phone with Power+volume UPPER key pressed till "Starting RSD protocol support" comes up
d. Connect to the Laptop and Hit Start button in RSD Lite Program
e. It Did Throw an error saying “FAIL” after showing the following message
i. Failed to boot: error 0x1000'( not word for word). There will also be a list of boot options like Fastboot, RSD, Recovery, etc. And it says Starting Fastboot Protocol
2. Then comes unlocking the phone
a. Though I had the previous error message, it still had the Fastboot Protocol loaded
b. I went to the FASTBOOT folder in command prompt of my laptop executed the following to unlock the phone which worked perfectly as I see the “Unlock” on the left hand corner when phone boots
c. fastboot oem unlock (it gave me the code) then I used the code to unlock
d. fastboot oem unlock #######
e. fastboot reboot
3. Installing the recovery IMG
a. I had downloaded the Recovery IMG file (recovery-atrix5.img) from http://forum.xda-developers.com/showthread.php?t=1204500
b. Booted the phone into Fastboot mode (turn off phone, hold power and volume down key until 'fastboot' appears then use volume up to select so it says 'starting fastboot protocol support').
c. From the CMD promnt and FASTBOOT directory I used fastboot erase recovery
d. Then I executed fastboot flash recovery recovery-atrix5.img (Note: I didn’t rename the file to recovery as suggested by some people)
e. Then gave fastboot reboot to restart.
4. Booting into Recovery mode (This is where I have the problem)
a. The phone is not booting into recovery it’s not going past the Android and yellow Triangle screen
b. I re-flashed the phone same SBF file (this time it was a success showed in the RSD Lite Program), re-installed the same IMG file after renaming to recovery.img
c. Also tried with a different IMG from the same link (recovery-blue-atrix5.img) but no luck
d. Also deleted the file install-recovery.sh from ./etc/ folder (bought the app root manager to delete the file) and then push the recovery.img, no luck
e. Some people said to TAP the bottom right corner while on that screen, did that but nothing is happening
f. Then I saw a note to press both the Volume Keys at the same time, this works but in this mode the cursor (I mean the selection) on the phone doesn’t go to the First TWO (i and iii) shown below, it allows me to select any of the last FOUR (v, vi, vii, viii).
i. Android System Recovery <3e>
ii. <EMPTY LINE >
iii. Android System Recovery utility
iv. <EMPTY LINE >
v. Reboot System now
vi. Apply update from sdcard
vii. Wipe data/factory reset
viii. Wipe cache partition
g. Using the above option I did factory reset but sill no results.
5. Current condition of the phone
a. It boots in unlock mode and I can do all the daily tasks. But I want to install the CM7 ROM that’s my requirement
PLEASE HELP HELP HELP
First of all, I applaud your effort in giving the a very comprehensive description of your issue.
Second, it seems you are having issues with installing a custom recovery because the recovery you're describing is still the stock recovery. I'll look around and see if I can find something that might help.
jhakash said:
4. Booting into Recovery mode (This is where I have the problem)
a. It boots in unlock mode and I can do all the daily tasks. But I want to install the CM7 ROM that’s my requirement
PLEASE HELP HELP HELP
Click to expand...
Click to collapse
---------- Post added at 11:31 AM ---------- Previous post was at 11:28 AM ----------
Have you tried re-installing the CWM from RomManager through RomManager? And then boot into recovery from within the app?
---------- Post added at 11:40 AM ---------- Previous post was at 11:31 AM ----------
EDIT: This might seem trivial, but is "USB Debugging" turned on?
You are the Man, I just flashed the same CWM 5.0.2.0 and i am in the recovery mode. This gave me an error when i did last time hence i didn't try again.
Thanks a bunch
Glad I can help, also, I think it's recommended to use the RomManager recovery for CM7 so good thing it worked.
jhakash said:
You are the Man, I just flashed the same CWM 5.0.2.0 and i am in the recovery mode. This gave me an error when i did last time hence i didn't try again.
Thanks a bunch
Click to expand...
Click to collapse
Oops.. started again, Can i use the recovery-atrix5.img and ROM manager flash it? if yes, then how?
I copy this file (after renaming to recovery.img) to both internal storage and SD card then what option should i choose in ROM Manager?
If you downloaded the CWM zip file for the romracer recovery and as long as RomManager's recovery is working then, yes, you can.
jhakash said:
Oops.. started again, Can i use the recovery-atrix5.img and ROM manager flash it? if yes, then how?
I copy this file (after renaming to recovery.img) to both internal storage and SD card then what option should i choose in ROM Manager?
Click to expand...
Click to collapse
jhakash said:
Oops.. started again, Can i use the recovery-atrix5.img and ROM manager flash it? if yes, then how?
I copy this file (after renaming to recovery.img) to both internal storage and SD card then what option should i choose in ROM Manager?
Click to expand...
Click to collapse
See post#2 from romracer's thread. Read the Miscellaneous part. Probably need to get rid of, or backup, install-recovery.sh.
He has mentioned he already did that. In his OP, under the steps he took look at "Booting into Recovery Mode" - 4.d, he says he removed it.
Maybe he's not doing it in the right order? Do you happen to know which should be done first as far as installing recovery and removing said file?
ghost_og said:
See post#2 from romracer's thread. Read the Miscellaneous part. Probably need to get rid of, or backup, install-recovery.sh.
Click to expand...
Click to collapse
live4nyy said:
He has mentioned he already did that. In his OP, under the steps he took look at "Booting into Recovery Mode" - 4.d, he says he removed it.
Maybe he's not doing it in the right order? Do you happen to know which should be done first as far as installing recovery and removing said file?
Click to expand...
Click to collapse
Woops, I should have read more carefully. It's best to remove the file first and then flash the recovery.img, or else the script will install the stock recovery on boot. That would make stock recovery the current one on the phone at the time of the script getting deleted.
I would double check and make sure /system/etc does not have install-recovery.sh. If it is not there, then proceed to the fastboot steps and reflash the recovery.img again. It should stick this time.
@Ghost, yes i deleted the file multiple times however i didn't find the /system/etc folder on the Internal Storage. however I found the install-recovery.sh file under /etc folder. The thing i observed that whether i flash it with a new CWM or not if i reboot the phone then it was created by itself.
@Live4nyy, Thanks for your suggestion, I could able to install CM7 now and it looks awesome good so far, but looks like i need to install Google Apps separately to access the APP market, am I right?
The only thing that happens to me is, it allowed me to go to Recovery only ONCE after i Flashed it thru ROM Manager, if i exit out of recovery without doing anything then next time tried to go to Recovery, it will struck at the same old Android screen and i had to flash it again. But Many thanks for suggesting to flash it thru ROM Manager.
Now with CM7, under ROM Manager (I guess this comes default with CM7) I see there is no version listed under "Flash Clockworkmod Recovery" and it says i must have to install it in-order to Flash and restore ROMs, do i need to do that? I can go to Recovery mode after reboot without any issues. Please Advise.
------
Jhakash
jhakash said:
@Ghost, yes i deleted the file multiple times however i didn't find the /system/etc folder on the Internal Storage. however I found the install-recovery.sh file under /etc folder. The thing i observed that whether i flash it with a new CWM or not if i reboot the phone then it was created by itself.
Click to expand...
Click to collapse
I just checked out my girlfriend's stock, locked, unrooted Atrix and she actually has install-recovery.sh in both /etc and /system/etc. Her file manager does not alphabetize anything in either folder, so I almost overlooked the second one.
If you're already on CM7, then you probably won't need to worry anymore. They have an entirely different set of start up scripts in that folder. Welcome to the community!
At this point I do not know enough to help you any further with this issue. All I knew about is the file that needs to be removed that @ghost_og has mentioned. But if you can flash it from RomManager and access CWM from there as well then I guess that's a good enough workaround for now.
Does anyone else have any idea why the stock recovery cannot be removed?
jhakash said:
@Live4nyy, Thanks for your suggestion, I could able to install CM7 now and it looks awesome good so far, but looks like i need to install Google Apps separately to access the APP market, am I right?
The only thing that happens to me is, it allowed me to go to Recovery only ONCE after i Flashed it thru ROM Manager, if i exit out of recovery without doing anything then next time tried to go to Recovery, it will struck at the same old Android screen and i had to flash it again. But Many thanks for suggesting to flash it thru ROM Manager.
Now with CM7, under ROM Manager (I guess this comes default with CM7) I see there is no version listed under "Flash Clockworkmod Recovery" and it says i must have to install it in-order to Flash and restore ROMs, do i need to do that? I can go to Recovery mode after reboot without any issues. Please Advise.
------
Jhakash
Click to expand...
Click to collapse
I am good to go now, everything seems to be functioning well after flashing CM7 ROM, no more recovery issues, and the Stock recovery is gone now.
Appreciate for all the info you guys provided, it helped a lot. Have a great day and Merry Christmas.
Regards
Jhakash
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
On which firmware are you? 4.0.2.A.0.62?
Is your device rooted? Because permission denied meens, that you have no root.
If you want to install clockworkmod on lww, check this out. It will automaticly install cwm, but I don't know if it works on locked bootloader...
For SE Tweak installer you could check this out. It's a tutorial
how to root it then?
On which firmware version are you? 4.0.2.A.0.62?
Check out this here
But go to settings -> about phone -> build number and tell which version please!
Simplest Guide to install cmw !
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
rachit.rc96 said:
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
Click to expand...
Click to collapse
But that's for unlocked bootloader only! With the method I posted, you can root without unlocking the bootloader...
@OP Please tell us which build number you have! You must go to settings -> About phone -> Build number and tell us the number (or at least the 3 or 2 last numbers). If .42, .58, .62, .69, .432, .578! Otherwise we can't help you
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Dark_Az_ said:
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Click to expand...
Click to collapse
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
mihahn said:
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
Click to expand...
Click to collapse
Sir I've installed cwm using xparts and I'M ABLE to get into CWM recovery mode using the one click button in xparts..bt i CANT do the same while swithing on the fon,by pressing (also tried tapping) vol down key, after seeing the blue light sensor..i've tried many times&many ways as explained in many threads..bt coudnt... :crying:
why its so?? Can u once again say the correct combination of keys pls?
live with walkman..locked bl..stock rom&kernal..just rooted..
EDIT: TAP POWER BUTTON TO ENTER INTO RECOVERY MODE....Its not vol down key now in pvyparts 5.5.0.4
follow
fini13 said:
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
Click to expand...
Click to collapse
first root by this method by doomlord
only follow 1 and 2 steps if u wan Gingerbread
and all for Ics
link- http://forum.xda-developers.com/showthread.php?t=1695514
then insall cwm
download CWM v5.02.7 from here:
http://www.mediafire.com/download/73xv18tht0e8zt4/CWM-Install.rar
requirements:
rooted device
how to install CWM on any xperia
1.turn on USB debugging
2.connect your phone to comp
3.download tthe above file and extract it
4.install-cwm2 for (xperia mini/mini pro/
active/live with walkman)
5.switch off your device
6.turn on the device and wait till "SONY
ERICSSON" logo appers
7.after "SONY ERICSSON" logo appears just
tap the volume down button repeatedly till
CWM open.
The simple method is, try to unlock yor device then install custom kernel that support autoroot and cwm, much tutorial for that in xda. :thumbup:
DISCLAIMER:
before doing anything to your device do a backup, im not responsable for any damage to your device
all needed files: http://www.mediafire.com/download/d9egpgwlh2a2c65/Desire610.zip
1) from device open xposed app and uninstall the framework ( you will install it back when the update is finished)
2) now extract debuggerd from the zip i provided and transfer it to your phone, copy it to system>bin folder with a filemanager ( i used root browser) overwrite the existing one and give permissions rwxr-xr-x
3) now put adb folder (extract it because is zipped) to disk c in your pc and put there the stock recovery
4) power off your device, then with power and lower volume key reboot it do fastboot mode
5) connect your phone to usb. over adb folder hold shift and right click it, choose open the command window here
6) a window will pop up write there: fastboot flash recovery recovery.img wait until its done
7) now reboot and finally flash the update
8) now you need twrp and root back. for twrp redo all the 3-4-5-6 steps ( put the twrp recovery in the adb folder)
9) for root download from xda the flashable zip of supersu and flash it with recovery ( before that remove any updates of supersu if you have any)
10) open xposed and install the framework back
11)done.
my english is bad so if you dont understand something let me know
what update is this? is it the stagefright patch or something else?
MGfusion said:
what update is this? is it the stagefright patch or something else?
Click to expand...
Click to collapse
yes for the ota that fixes stagefright, and for the future ones
Stuck
porozex said:
DISCLAIMER:
before doing anything to your device do a backup, im not responsable for any damage to your device
1) from device open xposed app and uninstall the framework ( you will install it back when the update is finished)
2) now extract debuggerd from the zip i provided and transfer it to your phone, copy it to system>bin folder with a filemanager ( i used root browser) overwrite the existing one and give permissions rwxr-xr-x
3) now put adb folder (extract it because is zipped) to disk c in your pc and put there the stock recovery
4) power off your device, then with power and lower volume key reboot it do fastboot mode
5) connect your phone to usb. over adb folder hold shift and right click it, choose open the command window here
6) a window will pop up write there: fastboot flash recovery recovery.img wait until its done
7) now reboot and finally flash the update
8) now you need twrp and root back. for twrp redo all the 3-4-5-6 steps ( put the twrp recovery in the adb folder)
9) for root download from xda the flashable zip of supersu and flash it with recovery ( before that remove any updates of supersu if you have any)
10) open xposed and install the framework back
11)done.
my english is bad so if you dont understand something let me know
Click to expand...
Click to collapse
Hey man need some help here. I followed all your steps but still can't manage to update my device. when it starts to update in recovery mode it gets upto 40% and then a red triangle appears. And then I am still in my old software (1.29.707.1)
adnan.rakib said:
Hey man need some help here. I followed all your steps but still can't manage to update my device. when it starts to update in recovery mode it gets upto 40% and then a red triangle appears. And then I am still in my old software (1.29.707.1)
Click to expand...
Click to collapse
If you have jmz kernel flash the stock one and overwrite again debuggered, if still dosent work get the debuggered file of your stock untouched Rom ( 100% clean no root,removed system files etc). If still fails that means you removed some system files from your device and ota blocks update
porozex said:
If you have jmz kernel flash the stock one and overwrite again debuggered, if still dosent work get the debuggered file of your stock untouched Rom ( 100% clean no root,removed system files etc). If still fails that means you removed some system files from your device and ota blocks update
Click to expand...
Click to collapse
hi,
I flashed the stock kernel, stock recovery and pasted the debuggered you attached but it still fail on 40%...I don't know where to get the ruu for the eu rom...any ideas?
vacs03 said:
hi,
I flashed the stock kernel, stock recovery and pasted the debuggered you attached but it still fail on 40%...I don't know where to get the ruu for the eu rom...any ideas?
Click to expand...
Click to collapse
Maybe you remove some apps from the system? If yes install them back from the at&t version here on this forum with the odex files. The only way to update is to have a 100% untouched Rom and a clean debuggered file
Need some help here
vacs03 said:
hi,
I flashed the stock kernel, stock recovery and pasted the debuggered you attached but it still fail on 40%...I don't know where to get the ruu for the eu rom...any ideas?
Click to expand...
Click to collapse
How did you flash the stock kernel?
adnan.rakib said:
How did you flash the stock kernel?
Click to expand...
Click to collapse
You can use the zip from jmz kernel and past there the stock lib files and kernel from a backuped stock Rom, then flash
Hi everyone,
This is what I have done to root my Teclast T8 with Magisk (based on this chineese forum: http://tieba.baidu.com/p/5449087481)
1-First download the official firmware from Needrom.com (You need to register): https://www.needrom.com/download/teclast-t8-e8c1/
2-Go to the Firmware folder and copy the “boot.img” file to the root directory of your tablet
3-Download and install MagiskManager on the tablet, click on Install, then choose to patch the boot image file. Choose the boot.img you’ve just uploaded to your tablet and it will start to automatically patch it.
Then go into the File Manager and go to the MagiskManager folder and find the “patch_boot.img“ and copy it to the root directory (without copying it to the root directory, you can not find the file from your pc…), then sends the file from the tablet to your computer.
4-For me the method with SP Flash Tool don’t work, because it says the scatter file is wrong (don’t know why…)
So i have to do it with adb and unlock the bootloader first:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
-reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Your bootloader is now unlock.
-then copy the “patched_boot.img” in the adb folder and tap in command prompt “fastboot flash boot patched_boot.img”, then “fastboot reboot”.
Your tablet should be rooted.
I think you can relock bootloader after... don't try yet.
PS: This is my first thread, so be indulgent ?
Don’t ask me technical questions because I am not a developer , just a simple user …
Hope this will help.
If someone find a way to find and flash a TWRP or how to install Xposed, please tell me, thx.
Rooted using same method but SP Flash Tools worked in my tablet.
Waiting for a TWRP ....
Yes, can confirm that method works for root.
Also tried the T10 TWRP and it's not working on the T8, just a black screen.
Don't need TWRP yet, some bugs in the ROM are more annoying than that
hi all
somebody tried the new rom v1.10 on needrom ??
marinero57 said:
hi all
somebody tried the new rom v1.10 on needrom ??
Click to expand...
Click to collapse
Hi guys i jus download v1.10 rom but have no idea how to flash, everything in chinesse... even recovery, how do you flash? the tablet have a TelcastOTA apk installed, this have a local update option allow to load firmware from sd, anyone used this app? what files should i put in SD?
thanks in advance
HI quick question what rom have u installed in ur T8, mine came with 1.01, i see in needrom have 3 versions: 1.06. 1.08, 1.10, have u updated to any of these?
Thanks
Polo19 said:
Hi everyone,
This is what I have done to root my Teclast T8 with Magisk (based on this chineese forum: http://tieba.baidu.com/p/5449087481)
1-First download the official firmware from Needrom.com (You need to register): https://www.needrom.com/download/teclast-t8-e8c1/
2-Go to the Firmware folder and copy the “boot.img” file to the root directory of your tablet
3-Download and install MagiskManager on the tablet, click on Install, then choose to patch the boot image file. Choose the boot.img you’ve just uploaded to your tablet and it will start to automatically patch it.
Then go into the File Manager and go to the MagiskManager folder and find the “patch_boot.img“ and copy it to the root directory (without copying it to the root directory, you can not find the file from your pc…), then sends the file from the tablet to your computer.
4-For me the method with SP Flash Tool don’t work, because it says the scatter file is wrong (don’t know why…)
So i have to do it with adb and unlock the bootloader first:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
-reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Your bootloader is now unlock.
-then copy the “patched_boot.img” in the adb folder and tap in command prompt “fastboot flash boot patched_boot.img”, then “fastboot reboot”.
Your tablet should be rooted.
I think you can relock bootloader after... don't try yet.
PS: This is my first thread, so be indulgent
Don’t ask me technical questions because I am not a developer , just a simple user …
Hope this will help.
If someone find a way to find and flash a TWRP or how to install Xposed, please tell me, thx.
Click to expand...
Click to collapse
Flashing ROM with SP flashtool - Teclast Master T8 (E8C1)
Fossxp13 said:
Hi guys i jus download v1.10 rom but have no idea how to flash, everything in chinesse... even recovery, how do you flash? the tablet have a TelcastOTA apk installed, this have a local update option allow to load firmware from sd, anyone used this app? what files should i put in SD?
thanks in advance
Click to expand...
Click to collapse
Hi! I haven't used in built update app so I'll try to explain how to update using flashtool. Follow the steps with your device disconnected from the pc and take into account your files will be erased.
First of all, I recommend you to install ADB and fastboot drivers: 15 seconds ADB Installer
As OP said download the rom from NeedRom and unzip it: You will have three folders:
升级工具, which contains flashtool
固件程序, with the rom
驱动程序, with the drivers
Rename all of them as flashtool, rom and drivers, for example. If you don't, you may have troubles launching flashtool or loading the scatter file.
Launch flashtool as administrator (升级程序, you could rename it too), if you get the message "The scatter file cannot found, please make sure the file exist before download" ignore it. In flashtool make sure MTK_AllInOne_DA.bin is selected as Download-Agent and select the scatter file inside rom folder as Scatter-loading file. Choose firmware upgrade from the list and click the Download button (the one with the green arrow).
Finally, switch off your device and connect it to your pc. Flashtool should do the rest, wait untill "Download Ok" message is displayed. Close flashtool, disconnect your device and switch it on.
IF your computer doesn't load needed drivers automatically, flashtool won't start the process as expected. You will need to open device manager on windows, right click on your device - update driver - choose manually - browse "inf" folder inside drivers folder (choose x86 or x64 according to your OS).
Hope it works! Good luck.
Prevent Brick and Xposed for Teclast Master T8 (E8C1)
Polo19 said:
OP
Click to expand...
Click to collapse
Hi Polo19!
Thanks for your post, I rooted my tablet following it! But since I encountered some issues in the process I wanted to share my experience.
IMPORTANT: For a few hours I thought I hard bricked my device, so I hope I could help somebody.
When patching boot.img with MagiskManager IF the app automatically tics "Keep force encryption" choose "Keep dm-verify" aswell!
I don't know why but this was the only way to make it work on my device, I kept getting a encryption error after flashing the patched boot.img, despite the fact that I have never encrypted my device.
After getting that error I tried to flash the clean rom again, but flashtool gave an error and the tablet completely died! Well, it seemed so.
It's pretty stupid but the only way to make it work again was pushing the reset button on the top right corner of the tablet for a few seconds and flashing the rom again.
About Magisk: use the OFFICIAL MAGISK XDA THREAD to download it, as https://magiskmanager.com/ is NOT the official website.
In step 3, I couldn't find the patched_boot.img file even after moving it to the root directory. So I had to (let the patched_boot.img file in the default directory):
Install ADB drivers in the computer: https://forum.xda-developers.com/showthread.php?t=2588979
Enable USB debugging in developer options in the tablet, connect it to the computer and accept the connection.
Open command prompt / powershell: "shift + right click" wherever you want to copy the patched_boot.img and open cmd or power shell.
Run the command:
Code:
adb pull /sdcard/MagiskManager/patched_boot.img
In step 4: you won't encounter that problem if you rename downloaded folders and get rid of chinese characters. Simply open flashtool, choose the scatter file, untick all options except boot and change the default boot.img with the patched one (I renamed it to boot.img, I don't know if it's necessary)
Xposed: you can install xposed using MagiskManager.
Install Xposed Installer for Magisk, go to download tab in MagiskManager and install Xposed SDK24 (for android 7.0) and reboot
Sources:
15 SECONDS ADB INSTALLER
MAGISK
SYSTEMLESS XPOSED
CHINESE FORUM
Just need TWRP and I'm happy.
There's a chinese TWRP but it's not working decently.
Rotiaiso said:
Hi Polo19!
Thanks for your post, I rooted my tablet following it! But since I encountered some issues in the process I wanted to share my experience.
IMPORTANT: For a few hours I thought I hard bricked my device, so I hope I could help somebody.
When patching boot.img with MagiskManager IF the app automatically tics "Keep force encryption" choose "Keep dm-verify" aswell!
I don't know why but this was the only way to make it work on my device, I kept getting a encryption error after flashing the patched boot.img, despite the fact that I have never encrypted my device.
After getting that error I tried to flash the clean rom again, but flashtool gave an error and the tablet completely died! Well, it seemed so.
It's pretty stupid but the only way to make it work again was pushing the reset button on the top right corner of the tablet for a few seconds and flashing the rom again.
About Magisk: use the OFFICIAL MAGISK XDA THREAD to download it, as https://magiskmanager.com/ is NOT the official website.
In step 3, I couldn't find the patched_boot.img file even after moving it to the root directory. So I had to (let the patched_boot.img file in the default directory):
Install ADB drivers in the computer: https://forum.xda-developers.com/showthread.php?t=2588979
Enable USB debugging in developer options in the tablet, connect it to the computer and accept the connection.
Open command prompt / powershell: "shift + right click" wherever you want to copy the patched_boot.img and open cmd or power shell.
Run the command:
In step 4: you won't encounter that problem if you rename downloaded folders and get rid of chinese characters. Simply open flashtool, choose the scatter file, untick all options except boot and change the default boot.img with the patched one (I renamed it to boot.img, I don't know if it's necessary)
Xposed: you can install xposed using MagiskManager.
Install Xposed Installer for Magisk, go to download tab in MagiskManager and install Xposed SDK24 (for android 7.0) and reboot
Sources:
15 SECONDS ADB INSTALLER
MAGISK
SYSTEMLESS XPOSED
CHINESE FORUM
Click to expand...
Click to collapse
Yes, i also install Xposed using MagiskManager and it works. Now i am able to use all fonctions of Greenify, Amplify, Powernap and get a pretty decent standby batterylife.
marinero57 said:
hi all
somebody tried the new rom v1.10 on needrom ??
Click to expand...
Click to collapse
Hi, I tried to follow the procedure but in ROM 1.10 doesn't work
---------- Post added at 01:37 PM ---------- Previous post was at 12:44 PM ----------
With the news roms doesn't work...
What is the rom that was working this WA??
Thanks!
I just did this to a tablet that had OTA'd the 1.10 - using the 1.10's downloaded boot and latest Magisk Manager 5.5.4 / Magisk 15.3 beta
OEM Unlock, patching boot image and patched boot image flashing worked
BUT - the included Magisk Manager does not launch after installing upon reboot...
HOWEVER - V5.5.3 of the manager did work.
$ adb -s 0123456789ABCDEF install MagiskManager-v5.5.3.apk
Success
$ adb -s 0123456789ABCDEF shell
t8_e8c1:/ $ su
t8_e8c1:/ #
Notes
1. Tablet is wiped
2. Boot delay of 5 seconds is added with "can't be trusted" warning in white text
3. Fails safetynet
Letting MagiskManager update itself to 554 also worked - so I think my method of just installing the apk from the Magisk zip's common folder was wrong.
Kerrnel said:
I just did this to a tablet that had OTA'd the 1.10 - using the 1.10's downloaded boot and latest Magisk Manager 5.5.4 / Magisk 15.3 beta
OEM Unlock, patching boot image and patched boot image flashing worked
BUT - the included Magisk Manager does not launch after installing upon reboot...
HOWEVER - V5.5.3 of the manager did work.
$ adb -s 0123456789ABCDEF install *************-v5.5.3.apk
Success
$ adb -s 0123456789ABCDEF shell
t8_e8c1:/ $ su
t8_e8c1:/ #
Notes
1. Tablet is wiped
2. Boot delay of 5 seconds is added with "can't be trusted" warning in white text
3. Fails safetynet
Letting ************* update itself to 554 also worked - so I think my method of just installing the apk from the Magisk zip's common folder was wrong.
Click to expand...
Click to collapse
Hi,
My T8 arrived yesterday and I've used OTA to update to 1.10.
Is the sptools method working with 1.10 or do I need to use this process?
Also where to the numbers 0123456789ABCDEF come from in the instructions I've quoted?
Thank is advance
i have the ota 1.10 update and the rooting was successful. magisk and xposed working flawlessly.
another point:
i have closed the bootloader after flashing the patched boot.img with "fastboot oem lock".
the device boot up is faster and the warning "...5 seconds" is gone.
now, i wait for twrp.
You dont need to unlock bootloader.
Just flash patched_boot with flash tool.
Zaphodb69 said:
Hi,
My T8 arrived yesterday and I've used OTA to update to 1.10.
Is the sptools method working with 1.10 or do I need to use this process?
Also where to the numbers 0123456789ABCDEF come from in the instructions I've quoted?
Thank is advance
Click to expand...
Click to collapse
I had multiple devices attached to the PC.
No -s ABC... needed if you only have the one.
Sent from my T8(E8C1) using Tapatalk
The suggested worked for me. I will also mention that you must be connected to the internet to patch the boot.img file with magisk manager (otherwise, the option will not be presented in the magisk manager GUI).
Were there made any changes for the fingerprint? Soimebody mentioned, it isn´t that good. Maybe the last updates change something...
Hello everyone, my phone is samsung note 10 plus, I have twrp installed and rooted with magisk, I'm on Android 9, I somehow lost root, have no idea how, I'm very careful not to allow updates or google to install something there might affect my root.
when I go to magisk I'm getting the image that I've attached, when I click on install magisk, download the zip file and try to install it I get an an error as show in the 2nd image, saying unsupported/unknown image forma. I've also attached the log file. Is there any way for me to fix this without flashing the rom and start from scratch? Can I repair it somehow, maybe with TWRP?
Thank you all in advance
you have boot.img of the device?
i thought you can only install magisk in 2 way by flashing boot.img unto magisk or flashing magisk.zip unto TWRP as recovery partition
#edit how did you install magisk in the beginning? thats how you will install it again
there a chance you will get your device brick if you install magisk wrong way (A/B partition) but since you already install it previously just reinstall it back
Hmmm, where should I have the boot. Img you mean as if I backed it up on my pc? Or I can download it and use it?
Now I'm confused :/
Before i explain i don't take responsibility for any damages caused on your device if you decided to follow my tutorial .
So basically there's 2 way to install Magisk
• Image Patching - Basically this is what most people do they find stock boot.img and recovery.img for there devices
1. Copy the Stock boot.img or recovery.img to your device
2. Download and install the latest Magisk Manager
If you are patching a recovery image, manually check “Recovery Mode” in Advanced Settings!
Press Install → Install → Select and Patch a File, and select your stock boot or recovery image file
Magisk Manager will patch the image, and store it in [Internal Storage]/Download/magisk_patched.img
Now pull the magisk_patched.img with ADB:
adb pull /sdcard/Download/magisk_patched.img
Flash the patched boot.img or recovery.img to your device and reboot.
For most devices, here is the fastboot command:
fastboot flash boot magisk_patched.img or
fastboot flash recovery magisk_patched.img if you are patching a recovery image
Now you are rooted
•Custom Recovery - This is when you do not have Stock boot.img or recovery.img for your device
( High Chance Of Phone Getting Bricks )
1. Download and install the latest Magisk Manager
2. Download Magisk.zip (https://github.com/topjohnwu/Magisk/releases/) choose the Latest Release
3.Now reboot to recovery (TWRP, CWM ... ETC)
if you use stock recovery it should say "apply update via sdcard"
then just choose Magisk.zip
4. Now if you have TWRP just click Install and choose Magisk.zip
5. wait for the process
6. Now you are Rooted (hopefully xD :fingers-crossed
ineedroot69 said:
Before i explain i don't take responsibility for any damages caused on your device if you decided to follow my tutorial .
So basically there's 2 way to install Magisk
• Image Patching - Basically this is what most people do they find stock boot.img and recovery.img for there devices
1. Copy the Stock boot.img or recovery.img to your device
2. Download and install the latest Magisk Manager
If you are patching a recovery image, manually check “Recovery Mode” in Advanced Settings!
Press Install → Install → Select and Patch a File, and select your stock boot or recovery image file
Magisk Manager will patch the image, and store it in [Internal Storage]/Download/magisk_patched.img
Now pull the magisk_patched.img with ADB:
adb pull /sdcard/Download/magisk_patched.img
Flash the patched boot.img or recovery.img to your device and reboot.
For most devices, here is the fastboot command:
fastboot flash boot magisk_patched.img or
fastboot flash recovery magisk_patched.img if you are patching a recovery image
Now you are rooted
•Custom Recovery - This is when you do not have Stock boot.img or recovery.img for your device
( High Chance Of Phone Getting Bricks )
1. Download and install the latest Magisk Manager
2. Download Magisk.zip (https://github.com/topjohnwu/Magisk/releases/) choose the Latest Release
3.Now reboot to recovery (TWRP, CWM ... ETC)
if you use stock recovery it should say "apply update via sdcard"
then just choose Magisk.zip
4. Now if you have TWRP just click Install and choose Magisk.zip
5. wait for the process
6. Now you are Rooted (hopefully xD :fingers-crossed
Click to expand...
Click to collapse
Thank you very much.
OK, I tried method 2 and didn't work. I downloaded my stock firmware and I have the image file, I can try the first one to place the image in the root of the phone, patch the file with magisk and reflesh it with Odin?
Will I lose all my stuff on the phone by doing this? Thank you
i remember using odin back in 2012 for my samsung galaxy y i didn't know people still using that thing
i search your device on google and it said samsung provide the kernel for it ( https://www.xda-developers.com/samsung-galaxy-note-10-kernel-source-code/amp/ ) thats a good start for rooting your device try looking for it
also visit https://forum.xda-developers.com/galaxy-note-10 it is dedicated section for your device model which means all threads and post are for your device model
ineedroot69 said:
i remember using odin back in 2012 for my samsung galaxy y i didn't know people still using that thing
i search your device on google and it said samsung provide the kernel for it ( https://www.xda-developers.com/samsung-galaxy-note-10-kernel-source-code/amp/ ) thats a good start for rooting your device try looking for it
also visit https://forum.xda-developers.com/galaxy-note-10 it is dedicated section for your device model which means all threads and post are for your device model
Click to expand...
Click to collapse
Im already rooted....
Im having issues how to fix the root as i somehow don't have it any more and i don't want to reflash my rom if I'll lose all my stuff on the phone. Im looking how to fix the root.
drazenm said:
Im already rooted....
Im having issues how to fix the root as i somehow don't have it any more and i don't want to reflash my rom if I'll lose all my stuff on the phone. Im looking how to fix the root.
Click to expand...
Click to collapse
He's just saying to re-root it... If you lost root it's more than likely gone and you'll have to do whatever you did to gain root in the beginning. I constantly backup all my apps, data, pictures and everything to my little USB OTG thumb drive and to my laptop. I do this daily because many times a factory reset is what has to happen depending on what's going on. You can grab a Samsung micro sdcard 128 GB for $18-$19 or so online or thumb drives like I have a SanDisk 128gb.. it was $14. Just some thoughts for moving ahead so you don't have to go through this again. Lots of good suggestions here. If I were you I'd hit the "thanks" button on whenever took time to stop and search for answers to your issue. That's what we do here on xda. I could care less about racking up "thanks" count just throwing that out there so that you know..
Good luck on getting her all fixed. The note 10 is a real gem!
Sent from my marlin using XDA Labs
flash713 said:
He's just saying to re-root it... If you lost root it's more than likely gone and you'll have to do whatever you did to gain root in the beginning. I constantly backup all my apps, data, pictures and everything to my little USB OTG thumb drive and to my laptop. I do this daily because many times a factory reset is what has to happen depending on what's going on. You can grab a Samsung micro sdcard 128 GB for $18-$19 or so online or thumb drives like I have a SanDisk 128gb.. it was $14. Just some thoughts for moving ahead so you don't have to go through this again. Lots of good suggestions here. If I were you I'd hit the "thanks" button on whenever took time to stop and search for answers to your issue. That's what we do here on xda. I could care less about racking up "thanks" count just throwing that out there so that you know..
Good luck on getting her all fixed. The note 10 is a real gem!
Sent from my marlin using XDA Labs
Click to expand...
Click to collapse
I can re root it, that's not the problem, i can do it with the patched magisk boot image through Odin, im asking if that's gonna wipe off everything on my phone. Because i can't backup certain things without titanium backup, and titanium requires root access. Thank you for your help and everyone's else's im well aware and grateful for the attempts, suggestions etc.
no it's not gonna wipe anything thats why magisk is called "systemless" . It will essentially modify the system without actually modifying it.
if you flash magisk_patched.zip nothing noticeable will happen except you will have root access
all your installed application will be there
also i notice this some people actually copy magisk_patched.zip thats really bad idea you need to let Magisk generate it.
For example you have 2 phones same model and same build version .
You generate magisk_patched.zip on the phone A
then decided to copy magisk_patched.zip into phone B ofcourse it will still works
but since you just copy it and didnt let magisk generate it . It would not make backup for boot or recovery partition
if you uninstall Magisk on your phone B .There is really high super ultra mega chance of your phone getting bricks. Also it would not revert any changes done on the period while Magisk is installed
ineedroot69 said:
no it's not gonna wipe anything thats why magisk is called "systemless" . It will essentially modify the system without actually modifying it.
if you flash magisk_patched.zip nothing noticeable will happen except you will have root access
all your installed application will be there
also i notice this some people actually copy magisk_patched.zip thats really bad idea you need to let Magisk generate it.
For example you have 2 phones same model and same build version .
You generate magisk_patched.zip on the phone A
then decided to copy magisk_patched.zip into phone B ofcourse it will still works
but since you just copy it and didnt let magisk generate it . It would not make backup for boot or recovery partition
if you uninstall Magisk on your phone B .There is really high super ultra mega chance of your phone getting bricks. Also it would not revert any changes done on the period while Magisk is installed
Click to expand...
Click to collapse
Thanks for the help, please correct me if im wrong.
Im supposed to copy the AP . md5 file to the root directory of my phone, patch it with magisk, get the patched file, copy it on the pc, connect phone to the pc, get it into download mode, flash the patched file with Odin and that should be it?
Or maybe i can do it with twrp?
Any suggestions?
drazenm said:
Any suggestions?
Click to expand...
Click to collapse
1. Install the latest Magisk Manager
2. In Magisk Manager: Install → Install → Select and Patch a File and select the AP tar file.
Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
3. Copy the patched file to your PC with adb pull /sdcard/Download/magisk_patched.tar. Do not use MTP as it is reported to corrupt files.
4. Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Important: Uncheck "Auto Reboot" in Options!
5. Magisk is now successfully flashed to your device! But there are still several steps before you can properly use the device.
6. We now want to boot into the stock recovery to factory reset our device.
Full data wipe is mandatory! Do not skip this step.
Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the S10 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen.
7. Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device.
8. This time, we can finally boot to the system with Magisk. Select Reboot system now, and immediately press the combo key to recovery. After seeing the bootloader warning screen, release all buttons so it can boot to the system.
9. The device will automatically reboot for the first time it boots. This is completely normal and done by design.
10. After the device is booted up, do the usual initial setup. The following steps will need an internet connection.
11. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
12. Voila! Enjoy Magisk
credit to @Magisk github
you can read the full tutorial here https://github.com/topjohnwu/Magisk/blob/master/docs/install.md
ineedroot69 said:
1. Install the latest Magisk Manager
2. In Magisk Manager: Install → Install → Select and Patch a File and select the AP tar file.
Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
3. Copy the patched file to your PC with adb pull /sdcard/Download/magisk_patched.tar. Do not use MTP as it is reported to corrupt files.
4. Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Important: Uncheck "Auto Reboot" in Options!
5. Magisk is now successfully flashed to your device! But there are still several steps before you can properly use the device.
6. We now want to boot into the stock recovery to factory reset our device.
Full data wipe is mandatory! Do not skip this step.
Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the S10 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen.
7. Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device.
8. This time, we can finally boot to the system with Magisk. Select Reboot system now, and immediately press the combo key to recovery. After seeing the bootloader warning screen, release all buttons so it can boot to the system.
9. The device will automatically reboot for the first time it boots. This is completely normal and done by design.
10. After the device is booted up, do the usual initial setup. The following steps will need an internet connection.
11. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
12. Voila! Enjoy Magisk
credit to @Magisk github
you can read the full tutorial here https://github.com/topjohnwu/Magisk/blob/master/docs/install.md
Click to expand...
Click to collapse
Thanks so much for your help, but i just want to get root back on my phone as i had it rooted already, i dont want to wipe off everything and lose my stuff. There are things that i can only backup with titanium backup, which i can't use now without root privileges :/ can i repair root somehow?
how did you lose your root anyway?
your Android OS updated?
you can try restoring apps with titanium backup but i don't think it will restore Magisk being installed again and gaining root access
ineedroot69 said:
how did you lose your root anyway?
your Android OS updated?
you can try restoring apps with titanium backup but i don't think it will restore Magisk being installed again and gaining root access
Click to expand...
Click to collapse
I didn't do the update, but something did mess up the root aa you can see on the photos that I've attached at the beginning of the topic. I just want to reroot my phone again but not to loose all my current stuff on it.
if you have boot.img or recovery.img for your device you might not lose your stuff installing back magisk but i think you only have the whole firmware ".tar.md5" flashing thats is like factory reset for your phone
#edit i read about ".tar.md5" they say if you just extract it .It contains all stock .img file for your device such as boot.img, recovery.img , system.img ...etc
since i have too much free time can you upload the firmware ".tar.md5" of your device i will upload .boot.img and recovery.img for you
ineedroot69 said:
if you have boot.img or recovery.img for your device you might not lose your stuff installing back magisk but i think you only have the whole firmware ".tar.md5" flashing thats is like factory reset for your phone
#edit i read about ".tar.md5" they say if you just extract it .It contains all stock .img file for your device such as boot.img, recovery.img , system.img ...etc
since i have too much free time can you upload the firmware ".tar.md5" of your device i will upload .boot.img and recovery.img for you
Click to expand...
Click to collapse
thank you for taking your time to help me out, i appreciate it.
here is the link to the firmware file:
https://androidfilehost.com/?fid=6006931924117937015
inside are these files:
AP_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_low_ship_meta_OS9.tar.md5
BL_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_low_ship.tar.md5
CP_N975FXXU1ASH5_CP13587367_CL16618471_QB25409313_REV01_user_low_ship.tar.md5
CSC_OMC_OXM_N975FOXM1ASH5_CL16618471_QB25349308_REV01_user_low_ship.tar.md5
HOME_CSC_OMC_OXM_N975FOXM1ASH5_CL16618471_QB25349308_REV01_user_low_ship.tar.md5
ineedroot69 said:
if you have boot.img or recovery.img for your device you might not lose your stuff installing back magisk but i think you only have the whole firmware ".tar.md5" flashing thats is like factory reset for your phone
#edit i read about ".tar.md5" they say if you just extract it .It contains all stock .img file for your device such as boot.img, recovery.img , system.img ...etc
since i have too much free time can you upload the firmware ".tar.md5" of your device i will upload .boot.img and recovery.img for you
Click to expand...
Click to collapse
Any luck?
drazenm said:
Any luck?
Click to expand...
Click to collapse
sorry for late reply i'm kinda busy but to make it easier on my part (downloading 5GB file would take me 5 hours) can you just upload the following ?
AP_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_ low_ship_meta_OS9.tar.md5
BL_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_ low_ship.tar.md5
CP_N975FXXU1ASH5_CP13587367_CL16618471_QB25409313_ REV01_user_low_ship.tar.md5