Hi Friends,
Model Number - GT-P7510
I recently rooted and installed the CM9 ICS nightly rom using the noob video instructions (This included rooting with Odin, installing CMW recovery 4.0.0.4, then I flashed the ROM cm-9-20120624 Nightly and finally flashed GAPPS-ics).
I over clocked using the CM9 settings and everything worked perfectly for about a week, it was great. Then it just crashed while I was reading my email and began to bootloop. After reading for similar errors I rebooted to recovery and tried wiped the cache and dalvic cache, I wiped data and factory reset several times but nothing worked, always the same bootloop. I re flashed the same ROM and still nothing, after a while the boot screen would simply freeze instead of bootloop.
Then I connected to my PC, and did this to no avail. In fact it simply added to the problem by adding a yellow warning triangle while attempting to boot so I did the Oden thing again like the first time I rooted however I installed CMW version 5.5.0.4 instead thinking it might help but it hasn't.
One last point, when I attempt to wipe data/factory reset the tablet seems to freeze and attempt to reboot rather than say something like "success" as it would during a cache wipe. This maybe normal or it maybe the problem! who knows?
On that point, I would be very grateful if some of you could help get me to the point when my PC recognises the tablet so I can reflash a new ROM.
Thanks in advance,
Karl
I once got the same problem. The only thing that helped was to flash back the stock rom via Odin with the pit file. And don't forget to do a hard reset after flashing the rom. I'll just stick to the stock rom until the official update is getting released.
Sent from my GT-P7501 using xda app-developers app
Questions go in the Q&A section
I think the best way is still to do factory reset, go back to the stock ROM first and try custom HC ROM until the official ICS is released.
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
Hey guys,
After using a CM9 rom for a long time I decided to try a cm10 nightly. I just flashed the rom in ClockworkMod and dont think I updated anything else such as boot loader. It boots, says "samsung galaxy 10.1, then I get the CM wheel rotating and it comes to a homescreen but says "Unfortunately, setup wizard has stopped" and I click "ok" and it just keeps coming up. I cant get to home screen or anything. I used to be savvy with flashing these diff roms but after I was on a stable CM Rom for so long I kind of forgot and didnt do it right.
Like I said my guess is I flashed a jelly bean rom onto a older kernel or boot loader, forgive me if I am using wrong terms here. I am sure it can be brought back but its been awhile since I did this stuff so any help is appreciated.
thanks in advance.
Craig
Did you make a full wipe i.e. system, data, cache, dalvik before flashing?
Sent from my GT-P7500 using Tapatalk HD
Boot to Download mode and Odin ICS 4.0.4 on the device first. That will give you the required bootloader. You can then root the device before you flash the JB. But you must do full wipes (format/factory reset, format system under Mounts/Storage, wipe dalvik under Advance) before the installation. For the installation, make sure your Recovery is the current one. I use CWM Recovery 6.0.3.2 especially if you wish to install CM 10.1 which is what I run. After the installation wipe cache and dalvik again before rebooting.
Sent from my GT-P7500 using xda app-developers app
I have a sch-i500 that is rooted with cwm working.
I am very interested in running liquid smooth v 2.9 found here: http://forum.xda-developers.com/showthread.php?t=2245120
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
http://forum.xda-developers.com/showthread.php?t=1026746
seems to be the best way for me to recover from this (looks like I flashed a non voodoo rom without removing voodoo) but I am unable to get the phone into download mode with or without the battery in the phone.
please help......(update) Alright, I am a moron. needed to have a powered usb port. on my way to recovery. thanks for having all this great info in one place.
aircooledbusses said:
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
Click to expand...
Click to collapse
Oh so close.
When coming from 2.3.x ROM you will need to flash the rom (liquid: or other 4.2.x) you will need to flash 2 more times...
The 1st flash get you into the new recovery only,,, as you found out.
2nd flash will pop up with an error message about incompatible partition and telling you to re-flash again,,,
So 3rd flash actually installs your new ROM
Then install a current/compatible Google gapps
.
Enjoy
.
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
aircooledbusses said:
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
Click to expand...
Click to collapse
what does the error say besides status 7?
did you odin the CWM4 fixed for cm7 then install the ROM 3 times?
can you get a pic up for us to see?
just to be sure......using odin, I repartitioned with the pit, and flashed a E03 rom. rebooted the phone fine.
flashed the CWM4 fix for 7 and redid the GB bootloaders as well.
went into recovery and factory reset, wiped cache, and dalvik.
installed liquid-JB-v2.7-Official-fascinatemtd.zip this time first time took me directly to clockwork where I flashed again. prompted with install from sdcard complete. repeated and got same message.
factory reset, wipe, wipe and flashed gapps. Everything seems to have worked this time with the v2.7Official instead of 2.9. I will play with this for just a bit and probably try it again tonight with a fresh downloaded copy of v2.9. I really do appreciate your assistance and help and I would not have gotten this far without the forum.
update:
flawless installation of v2.9 since 2.7 was already installed. (installed via cloclwork mod recovery)
It was most likely an operator error that prevented me from installing 2.9 after E03. But I don't see the benefit of going back to recreate why it didn't work. Thanks again all is good and right.
hello,
i never posted here before but i am following this site for a while and flashed lots of roms using the data here.
i got into a problem trying to flash the kitkat on my HTC sensation 4G.
i am using ATM the android 4.2.2 CM 10.1 albinoman887 rom.
i tried installing the android 4.4.1 according the instructions posted by android1234567 here:
http://forum.xda-developers.com/showthread.php?t=2530073
i did factory factory reset, cache wipe, and davlik wipe
after that flashed the Kernel Aroma installer, the rom and the gapps from this link.
after i flashed them i rebooted and the phone doesnt pass the reboot screen, got stuck on it for few seconds and then restart and stuck again.
could anyone help me resolve this?
thanks ahead.
Dan
ok
if mean bootloop then again do the same step but wipe the dalvik cache,data,cache means clean your phone and then install the rom u will out of boot loop
tried it, it didnt work, still bootlooping.
when i install the gapps file it says it detects 4.4 rom.
any other ideas?
thanks for the help