So, let me start by saying I'm an idiot.
I made an attempt to update my CWM and CM rom the other night. Went through the update, updated CWM to 5.0.2.7 and attempted to update to the CM 10.1 rom. Received an assert failed error. Discovered after some testing an research that in my wisdom i flashed the international kernel for the YP-g70 on my us version of the player. I have attempted everything I can think of, including flashing the correct tar file through ODIN and even using the NAND wipe to attempt to start from scratch. 5.0.2.7 is still on my player regardless of what I have done and I cannot flash any roms.
Any help would be greatly appreciated.
jab818 said:
So, let me start by saying I'm an idiot.
I made an attempt to update my CWM and CM rom the other night. Went through the update, updated CWM to 5.0.2.7 and attempted to update to the CM 10.1 rom. Received an assert failed error. Discovered after some testing an research that in my wisdom i flashed the international kernel for the YP-g70 on my us version of the player. I have attempted everything I can think of, including flashing the correct tar file through ODIN and even using the NAND wipe to attempt to start from scratch. 5.0.2.7 is still on my player regardless of what I have done and I cannot flash any roms.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
get your device in dl mode and flash entropys kernel
I'm assuming you're referring to the daily driver found here
Tried that, still doesn't work.
jab818 said:
I'm assuming you're referring to the daily driver found here
Tried that, still doesn't work.
Click to expand...
Click to collapse
Have you tried redownloading the rom
Sent from my SHV-E160S using xda app-developers app
Related
i was flashing klins klassic and something went wrong. i flashed the U.S PIT file and i guess it messed with some stuff due to that Klins klassic was based of international. now it boots to recovery and no further. any help would be appreciated.
answer
Flash odin to stock firmware.
galaxy player us.ver stock rom is
http://forum.xda-developers.com/showthread.php?t=1512331 here.
tnsrua2000 said:
Flash odin to stock firmware.
galaxy player us.ver stock rom is
http://forum.xda-developers.com/showthread.php?t=1512331 here.
Click to expand...
Click to collapse
tried that when i do, it gives me errors of not mounting stuff in recovery. it was something in the PIT file that messed with it.
Help?
Sent from my MB855 using XDA App
The first think that I would try is a full recovery rom. If you have a U.S. player 4.0 and you flashed a U.S. pit file for the 4.0 your partitions should be fine but you may be missing the data that you didn't flash back to the rom, such as bootloaders. As far as I know their is no recovery rom for the U.S. 4.0 but I believe klin1344 may have the necessary files.
Good luck...
Meticulus said:
The first think that I would try is a full recovery rom. If you have a U.S. player 4.0 and you flashed a U.S. pit file for the 4.0 your partitions should be fine but you may be missing the data that you didn't flash back to the rom, such as bootloaders. As far as I know their is no recovery rom for the U.S. 4.0 but I believe klin1344 may have the necessary files.
Good luck...
Click to expand...
Click to collapse
hmmm. okay well then ill see if he has anything. im gonna be really screwed if i cant get this to work. 200 down the drain of my parents money lol.
I still have yet to unbrick my device. cannot think of anything else to try. help please someone. this is how i brick it. i flashed klins rom, it ran fine. then i went back to wipe cache and dalvik, then it went to bootlooping. did a backup at that point. then went on to try to get it out of boot loop with the pit file and stock rom. gave me a bunch of errors so i flased steves and now it boots straight to CWM.
minimeofctown said:
tried that when i do, it gives me errors of not mounting stuff in recovery. it was something in the PIT file that messed with it.
Click to expand...
Click to collapse
Did you wipe data when you get these errors?
zaclimon said:
Did you wipe data when you get these errors?
Click to expand...
Click to collapse
no i dont get errors anymore in CWM. it says
ClockworkMod Recovery v3.0.0.5
Checking for ext4 partitions...
Checking /system...
Checking /data...
Checking /datadata...
Checking /cache...
Done!
minimeofctown said:
no i dont get errors anymore in CWM. it says
ClockworkMod Recovery v3.0.0.5
Checking for ext4 partitions...
Checking /system...
Checking /data...
Checking /datadata...
Checking /cache...
Done!
Click to expand...
Click to collapse
one more thing. it doesnt seem to mount data
I am having the exact same issue. I have tried every possible combination of files and settings available from this site in Odin with resetting and clearing in CWM. Nothing fixes the problem. I flash back to stock and it goes right to recovery as well. No solution.
Mynamestaken said:
I am having the exact same issue. I have tried every possible combination of files and settings available from this site in Odin with resetting and clearing in CWM. Nothing fixes the problem. I flash back to stock and it goes right to recovery as well. No solution.
Click to expand...
Click to collapse
When you flash stock does it give you a bunch of errors? Or is does it just give you the stock recovery with no errors?
Goes straight to recovery with errors
Sent from my SAMSUNG-SGH-I717 using xda premium
Mynamestaken said:
Goes straight to recovery with errors
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I'm working on it. i got it to boot up. try this. flash steves kernel and it shouldnt give you any errors but it will just boot to recovery. let me know if you get this
Minimeofctown see my PM.
Sent using Tapatalk
I have the same issue, boots to recovery with a list of errors. It says cannot process volume. i flashed steve's kernal, it does the same thing.
I've tried re-flashing a few rom managers via Odin (CWM, CWM Touch, TWRP) and it just seems the phone doesn't want to boot into them. I'm running the old h0twire CM9 build over ICS. I've flashed different roms and kernels with this version before, this is the first time I'm having any problems.
Gonna try going back to stock with Odin then start from there.
Anyone else have problems like this and if so, did you fix it?
Thanks in advance!
clifton66 said:
I've tried re-flashing a few rom managers via Odin (CWM, CWM Touch, TWRP) and it just seems the phone doesn't want to boot into them. I'm running the old h0twire CM9 build over ICS. I've flashed different roms and kernels with this version before, this is the first time I'm having any problems.
Gonna try going back to stock with Odin then start from there.
Anyone else have problems like this and if so, did you fix it?
Thanks in advance!
Click to expand...
Click to collapse
Hope this helps, the Road Map of tools and ROMs..for the G~Note
http://forum.xda-developers.com/showthread.php?t=1740367
I also cant load cwm a script is rewriting it everytime with 3e recovery! I cant rename it either the file isint mounted on the right permission. Anyone know how to get read write on the etc folder? Im prettu sure im rooted su and busybox work fine
Sent from my SGH-I717D using xda app-developers app
Got my Note a few hours ago. Charged it up. Downloaded Odin. Rebooted to download mode. Used Odin to flash some pda.tar that I got from a thread here which said it would install root.
My phone rebooted, and it has been stuck at "Samsung" ever since. Reboots and pulling battery do nothing. Reboots to a stuck samsung logo. I've also, since, flashed CWM successfully, and I'm able to boot to CWM.
I attempted to flash the CM10 builds from these boards, and it errors out with a build.prop thing and refuses to install the package.
Am I bricked without ever making even 1 phone call on my new phone? ..
You are not bricked. If you were bricked you would not be able to get into CWM.
What ROM did you try to install and can you still see it from CWM?
Also which CWM did you install? I think the version of CWM is probably the issue with CM10, just a guess.
Can you get in to download mode?
Also, what version of the Galaxy Note do you have? I717 or what?
From what I've seen all cmw versions posted on the board are too old to flash cm10.
Flashing cmw and then booting up to install/download/flash ROM manager and the latest version of cmw will fix the cm10 problem. But if you attempted to flash a cmw tar and it got stuck at the boot screen you likely flashed the wrong version for your os.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
kinghorsey said:
From what I've seen all cmw versions posted on the board are too old to flash cm10.
Flashing cmw and then booting up to install/download/flash ROM manager and the latest version of cmw will fix the cm10 problem. But if you attempted to flash a cmw tar and it got stuck at the boot screen you likely flashed the wrong version for your os.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I flashed a factor(?) build. It's an old gingerbread. Booted up. Tried to run Kies. It, of course, told me to fly a kite. Ran the pda.tar again and it installed a kernel, succesfully, that then allowed me to install superuser. Then I flashed my CWM again. It works. Just did a backup.
When I try to use it to install CM10, i get a status 7 error. I'm using the 4-14-2012 touch recover found at http://forum.xda-developers.com/showthread.php?t=1584576
From what I'm gathering from your post, if I install ROM Manager, it will update me to a better CWM, and that CWM will flash CM10 without status 7ing on me?
Thanks for the quick responses guys. I've done a number of Droid's, nexus 7, and my Acer a500, but I'm new to Odin. The thought of bricking a phone without owning it 3 hours had me in a panic.
edit: installed ROM manager. It doesn't give me the option to download CWM for a note. Not sure what to do there.
I don't believe your Note is bricked. This thing seems to be bullet proof.
Anthony820 said:
I flashed a factor(?) build. It's an old gingerbread. Booted up. Tried to run Kies. It, of course, told me to fly a kite. Ran the pda.tar again and it installed a kernel, succesfully, that then allowed me to install superuser. Then I flashed my CWM again. It works. Just did a backup.
When I try to use it to install CM10, i get a status 7 error. I'm using the 4-14-2012 touch recover found at http://forum.xda-developers.com/showthread.php?t=1584576
From what I'm gathering from your post, if I install ROM Manager, it will update me to a better CWM, and that CWM will flash CM10 without status 7ing on me?
Thanks for the quick responses guys. I've done a number of Droid's, nexus 7, and my Acer a500, but I'm new to Odin. The thought of bricking a phone without owning it 3 hours had me in a panic.
edit: installed ROM manager. It doesn't give me the option to download CWM for a note. Not sure what to do there.
Click to expand...
Click to collapse
First don't use rom manager it is crap software caused me more headaches than help. Use twrp here http://forum.xda-developers.com/showthread.php?t=1647575. Wipe your Note than flash cm10 than flash jb google apps and you will be up and running.
Anthony820 said:
I flashed a factor(?) build. It's an old gingerbread. Booted up. Tried to run Kies. It, of course, told me to fly a kite. Ran the pda.tar again and it installed a kernel, succesfully, that then allowed me to install superuser. Then I flashed my CWM again. It works. Just did a backup.
When I try to use it to install CM10, i get a status 7 error. I'm using the 4-14-2012 touch recover found at http://forum.xda-developers.com/showthread.php?t=1584576
From what I'm gathering from your post, if I install ROM Manager, it will update me to a better CWM, and that CWM will flash CM10 without status 7ing on me?
Thanks for the quick responses guys. I've done a number of Droid's, nexus 7, and my Acer a500, but I'm new to Odin. The thought of bricking a phone without owning it 3 hours had me in a panic.
edit: installed ROM manager. It doesn't give me the option to download CWM for a note. Not sure what to do there.
Click to expand...
Click to collapse
first things first
GET RID OF CWM. it will just cause more issues then it needs to.
second
INSTALL TWRP2.2.1.1
third
enjoy your day. *and make a new backup in twrp2.*
Anthony820 said:
I flashed a factor(?) build. It's an old gingerbread. Booted up. Tried to run Kies. It, of course, told me to fly a kite. Ran the pda.tar again and it installed a kernel, succesfully, that then allowed me to install superuser. Then I flashed my CWM again. It works. Just did a backup.
When I try to use it to install CM10, i get a status 7 error. I'm using the 4-14-2012 touch recover found at http://forum.xda-developers.com/showthread.php?t=1584576
From what I'm gathering from your post, if I install ROM Manager, it will update me to a better CWM, and that CWM will flash CM10 without status 7ing on me?
Thanks for the quick responses guys. I've done a number of Droid's, nexus 7, and my Acer a500, but I'm new to Odin. The thought of bricking a phone without owning it 3 hours had me in a panic.
edit: installed ROM manager. It doesn't give me the option to download CWM for a note. Not sure what to do there.
Click to expand...
Click to collapse
First don't use rom manager it is crap software caused me more headaches than help. Use twrp here http://forum.xda-developers.com/showthread.php?t=1647575. Wipe your Note than flash cm10 than flash jb google apps and you will be up and running.
One last thing if you want Adobe flash to work in your browser (i.e. Dolphin) you have to stay with ICS builds. Adobe stop supporting Android after 4.0.X releases.
Thanks guys. I swear I'm only a completely flustered noob with the note. I've got a custom ROM'd nexus 7 on one side of me and I'm using my sdcard from my CM10'd acer a500.
I can't thank you all enough. Everything is now running -- cm10 and booting -- and I'm live.
@ Anthony820.....
I have edited your topic to show [Solved] so that other users can see the status.
@ everyone else.....
Thank you for assisting the OP. This is what XDA is all about.
JamieD81 said:
first things first
GET RID OF CWM. it will just cause more issues then it needs to.
second
INSTALL TWRP2.2.1.1
third
enjoy your day. *and make a new backup in twrp2.*
Click to expand...
Click to collapse
Nothing wrong with ROM manager and I've never had an issue with it on the note. It does only flash newer cwm on ICS and doesn't seem to support gb well but that is easily bypassed.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Problem Solved. Found the correct version of recovery and bootloader. 4.2.2 roms will now install. Thank you to those who were willing to help. Now that I have educated myself on this tablet, I will begin developing for it.
-Neo
IAmTheOneTheyCallNeo said:
Good morning everyone
Just yesterday, I chose to update my tablet to one of the xda posted JB roms. I'm coming from an ics build 38 AOKP that I've been on for several months.
After I'd confirmed a successful download, I performed all the necessary cleaning procedures pre-flash, flashed the rom, and was stuck at the splash screen.
So I went back to the ics build and attempted the same with a cm-10.1 build with the same effect. Upon asking the first developer for advice flashing his rom, I was advised to update my recovery which was an older 5.x version of CWM to which another member directed me to the latest version.
Prior to this, I had attempted to use rommanager to update the recovery. During that process something happened in which the device rebooted and froze at the splash screen. I attempted a reboot into recovery via power+volume down and when selecting recovery, I only got a black screen.
So I took the Odin route and dropped the latest cwm tar.md5 through pda in download mode which allowed me to freely re-enter the rom and reboot without issues. However I still only have a black screen when attempting to get into recovery.
Any advice on how I would be able to restore my custom recovery without returning everything to factory images and starting over?
Thank you to those willing to spend the time and effort to help me solve this problem.
-Neo
Click to expand...
Click to collapse
You need to flash a new recovery. Grab a copy and install it using ODIN and you should be all set.
Re: [Q] 7510 (p4wifi) CWM Recovery assistance needed
k1mu said:
You need to flash a new recovery. Grab a copy and install it using ODIN and you should be all set.
Click to expand...
Click to collapse
Thanks for your response. Are you suggesting that I flash an older version of ClockworkMod recovery? I already flashed the latest version through Odin which gives me the same black screen.
Sent from my HTC One X using xda premium
IAmTheOneTheyCallNeo said:
Thanks for your response. Are you suggesting that I flash an older version of ClockworkMod recovery? I already flashed the latest version through Odin which gives me the same black screen.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I misread what you said. Apparently you've got your rom installed but recovery isn't working, correct?
I had no problems on my 7510 using CWM v5.5.0.4 and with CWM Touch 5.8.3.1 - either of those should work if you flash them with ODIN or Mobile ODIN.
Re: [Q] 7510 (p4wifi) CWM Recovery assistance needed
k1mu said:
I misread what you said. Apparently you've got your rom installed but recovery isn't working, correct?
I had no problems on my 7510 using CWM v5.5.0.4 and with CWM Touch 5.8.3.1 - either of those should work if you flash them with ODIN or Mobile ODIN.
Click to expand...
Click to collapse
Ok cool I'll give 5.8.3.1 a try if I can find it. So, in my reading I was under the assumption that cwm recovery needed to be above 6.x.x for use with 4.2.2 jb roms. Are you currently or have been on a 4.2.2 rom with your tablet using the recoveries that work for you?
Sent from my Rezound using xda premium
IAmTheOneTheyCallNeo said:
Ok cool I'll give 5.8.3.1 a try if I can find it. So, in my reading I was under the assumption that cwm recovery needed to be above 6.x.x for use with 4.2.2 jb roms. Are you currently or have been on a 4.2.2 rom with your tablet using the recoveries that work for you?
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
No, I've never tried any JB roms, so I didn't need the latest CWM. If nothing else, trying a different known-working CWM will at least prove that you're able to flash recovery and have it working.. then you can go find a 6.x recovery for the Tab 10.1.
Progress Report
So I managed to shell instal a version of TWRP and the recovery works perfectly! However, I am unable to use any roms except aokp ics (milestone6) lol
Could this be a recovery issue? Still somewhat unfamiliar with the Tab 10.1, I assumed there was an hboot that I could access to flash a recovery image but all reboot attempts into hboot (4.0.4) ended in a simple reboot.
Back to recoveries however, I attempted to flash different versions of CWM tars through Odin3 v1.85 and they all ended in solid black screens. Somewhat at a loss as only the Milestone 6 aokp build is accepted to my tablet and no other ics or jb builds. Somewhat off topic, is there no requirement to RUU upgrade the firmware to something later in order for the table to accept newer recoveries and hboots?
-Neo
Problem Solved. Found the correct version of recovery and bootloader. I apparently have an unlocked p4tmo that runs a few p4wifi roms.. Anyway, 4.2.2 roms will now install. Thank you to those who were willing to help. Now that I have educated myself on this tablet, I will most likely begin developing for it.
-Neo
Welcome man! This device has a fantastic community and another developer willing to put work into it really does help to breathe new life into an aging device. Enjoy your time here
So I was pretty determined to get Cm 10.1 running on my Galaxy Note 2 for Verizon. Before hand, I was using TWRP to do all my ROM flashings but when I tried to use CM 10.1, I was told I must use CWM for it to work properly.
Here's my issue, I tried using CWM but it kept on giving me an error and after searching for awhile, it said its because I'm trying to use TWRP instead of CWM. So I flashed CWM and it gave me the same error. Tried both Touch and regular, downgraded and upgraded to the latest CWM but still same error. So I said **** it and installed the lastest TWRP. Then all the ROMs that were giving me issues started to install flawlessly. Then I went to CWM and it gave me the same error.
Am I doing something wrong when I flash CWM? I tried both Odin and APP Update way and both with same results. After using TWRP for awhile, I actually am starting to like the CWM Touch a lot better and I want to switch but not if its going to be giving me problems every flash.
Any insight would be helpful,
and as always to everyone on this forum, thanks
Just make sure you are using the latest version of TWRP 2.5 and you will be fine. You also may need to re-download your ROM file.
Well I am, in a way, stuck using the TWRP right now but I would like to know if I can actually change it to CWM. And if so, how would I go about doing that? because flashing the CWM alone isn't doing anything for me.
wythyntime said:
Well I am, in a way, stuck using the TWRP right now but I would like to know if I can actually change it to CWM. And if so, how would I go about doing that? because flashing the CWM alone isn't doing anything for me.
Click to expand...
Click to collapse
That is the way I have always gone about getting CWM on my phone back when I wanted it. I would just flash over TWRP in TWRP and then reboot system and then reboot back into recovery and it would always be CWM. If it doesnt work for you that way then see if they have a Odin tar and if so follow the instructions to flash it in Odin. They may not have an Odin flashable though, its been a long time since I have used it and on a different phone so....
Sent from my SCH-I605 using XDA Premium HD app
Let me actually rephrase this. (My bad for any confusion)
So if I try to flash a rom using TWRP, it goes through without any issues, even the CM rom. But when I flash CWM and try flashing, it gives me the getdevice-"(t0vzwte)"-not exact".. When researching, I was kept on told its because it is running TWRP. I tell them its CWM and they told me to update my CWM. I actually like CWM a bit better, idk why. but I was just trying to get my phone 100% the way I want it.