Hello DInc 4G community,
I was curious to know if anyone else has seen low call signal or 4G signal loss with JB based ROMs? I have tried CM10.1 and the Avatar ROM and when flashing either, the cell signal strength only show's up to 3 bars as well as my phone always reverting to 3G instead of 4G. If I go back to stock based ROM, my cell signal shows full bars as well as the data mostly in 4G mode. Not sure it this is an artifact of the status bar indicator icon or possible firmware related? When I had my Dinc2 and was using ICS based ROM's, I had noticed improvements when flashing the ICS firmware.Wondered if this was the same for the DInc4g LTE?
rudyo78427 said:
Hello DInc 4G community,
I was curious to know if anyone else has seen low call signal or 4G signal loss with JB based ROMs? I have tried CM10.1 and the Avatar ROM and when flashing either, the cell signal strength only show's up to 3 bars as well as my phone always reverting to 3G instead of 4G. If I go back to stock based ROM, my cell signal shows full bars as well as the data mostly in 4G mode. Not sure it this is an artifact of the status bar indicator icon or possible firmware related? When I had my Dinc2 and was using ICS based ROM's, I had noticed improvements when flashing the ICS firmware.Wondered if this was the same for the DInc4g LTE?
Click to expand...
Click to collapse
that's kind of miss leading, if you check the numbers on your signal on both roms they are about the same. the number of bars is just different, as for the 3g and 4g stuff i'm not sure, never checked the numbers
I've seen the same thing, not looking at bars, but dbm
As in lower signal, more loss of reception on jb
Patgt500 said:
I've seen the same thing, not looking at bars, but dbm
As in lower signal, more loss of reception on jb
Click to expand...
Click to collapse
Yeah...forgot to mention that. At home with a stock ROM or even debloated stock ROM I get -79 to -90 dBm (4 -5 full bar icon). When I was using CM10.1 based ROM's I was seeing -89 to -101 dBm range (2-3 bar icon). So I'm staying with the PizzutoClaws ROM as my daily driver
rudyo78427 said:
Yeah...forgot to mention that. At home with a stock ROM or even debloated stock ROM I get -79 to -90 dBm (4 -5 full bar icon). When I was using CM10.1 based ROM's I was seeing -89 to -101 dBm range (2-3 bar icon). So I'm staying with the PizzutoClaws ROM as my daily driver
Click to expand...
Click to collapse
well when you get -79 to -90 are you on cdma or lte, there's a difference. when i'm on cdma on cm10 i get -75 when on lte i get -90 to -101
Aldo101t said:
well when you get -79 to -90 are you on cdma or lte, there's a difference. when i'm on cdma on cm10 i get -75 when on lte i get -90 to -101
Click to expand...
Click to collapse
My lower values I posted are on LTE. The lower the - dBm / dB value the better or closer you are to the Tower. As my signal gets worse 1-2 bar graph, I'm at -118 to -120 dBm on 4G. When my phone switches to 3G/EVDO/1x the signal strength is only showing dB value.
My 4G doesn't work at all on CM10.1. Just a hint on how to avoid this... Never mess with radio settings or try updating roaming capabilities. CyangenMod will break your 4G. There are problems with CyangenMod and device radios. There needs to be a way to reprogram the Radio Bands. Someone please try and figure something out. I have figured out a way on how to manipulate the radio to connect to 4G. But it is kinda complicated. You have have to switch the CDMA Subscription from RUIM/SIM to NV, then go to the dialer and dial *#*#4636#*#* then go into Phone Information, then go to "Set preferred network type:" and make sure that it says: "LTE/CDMA auto (PRL)" then restart your phone. There are a couple downsides to this.
1) Your calling won't work.
2) Your messaging won't work.
--
The only good thing about this is faster internet than 3G. About 1 MBps. (Roughly)
That is one thing I discovered while trying to repair my 4G. Good luck and if you figure it out, there is a forum that is called 4G Not Working that needs a solution to this specific problem. Please share it.
Sent from my Incredible 4G LTE using xda app-developers app
vazersecurity said:
My 4G doesn't work at all on CM10.1. Just a hint on how to avoid this... Never mess with radio settings or try updating roaming capabilities. CyangenMod will break your 4G. There are problems with CyangenMod and device radios. There needs to be a way to reprogram the Radio Bands. Someone please try and figure something out. I have figured out a way on how to manipulate the radio to connect to 4G. But it is kinda complicated. You have have to switch the CDMA Subscription from RUIM/SIM to NV, then go to the dialer and dial *#*#4636#*#* then go into Phone Information, then go to "Set preferred network type:" and make sure that it says: "LTE/CDMA auto (PRL)" then restart your phone. There are a couple downsides to this.
1) Your calling won't work.
2) Your messaging won't work.
--
The only good thing about this is faster internet than 3G. About 1 MBps. (Roughly)
That is one thing I discovered while trying to repair my 4G. Good luck and if you figure it out, there is a forum that is called 4G Not Working that needs a solution to this specific problem. Please share it.
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
if you would read the OP IN DEVELOPMENT you could solve these problems, concerning cm10.1 md has made it quite clear there
Aldo101t said:
if you would read the OP IN DEVELOPMENT you could solve these problems, concerning cm10.1 md has made it quite clear there
Click to expand...
Click to collapse
Yeah I have checked that, I attempted his fix method but no go.
vazersecurity said:
Yeah I have checked that, I attempted his fix method but no go.
Click to expand...
Click to collapse
This is a worthless response. What does "no go" mean? Be descriptive of what you tried, and in the process what worked and what failed.
Yeah I know not to talk to you because you're kinda a jerk. I just talked to Verizon and got it sorted out with them. I now have working 4G. But remove the *228 feature in your ROM, because that's what the problem was. It messed up my SIM Card because I wasn't aware you weren't supposed to do *228 on a phone like this. You developers are just too serious. Need to lighten up a little bit to the developers that haven't really got that much experience.
Sent from my ADR6410LVW using xda app-developers app
vazersecurity said:
Yeah I know not to talk to you because you're kinda a jerk. I just talked to Verizon and got it sorted out with them. I now have working 4G. But remove the *228 feature in your ROM, because that's what the problem was. It messed up my SIM Card because I wasn't aware you weren't supposed to do *228 on a phone like this. You developers are just too serious. Need to lighten up a little bit to the developers that haven't really got that much experience.
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
So...you weren't aware you weren't supposed to do *228? So you messed up? And you blame the developer? The guy making everyone's phone better. Moron.
Sent from my Incredible 4G LTE using xda app-developers app
somerandomname1 said:
So...you weren't aware you weren't supposed to do *228? So you messed up? And you blame the developer? The guy making everyone's phone better. Moron.
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
+1
Not blaming the developer. Just how he treated me. I did mess up. Sorry about that.
Sent from my ADR6410LVW using xda app-developers app
vazersecurity said:
Not blaming the developer. Just how he treated me. I did mess up. Sorry about that.
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
Asking for more information so he might be able to identify your problem is a huge jerk move. Now I understand....
Don't try to learn something if you can't take constructive criticism. It's natural to be frustrated when you're very experienced with something and someone asks for help with few details. Dumb questions get dumb answers.
Sent from my Incredible 4G LTE using xda app-developers app
somerandomname1 said:
Asking for more information so he might be able to identify your problem is a huge jerk move. Now I understand....
Don't try to learn something if you can't take constructive criticism. It's natural to be frustrated when you're very experienced with something and someone asks for help with few details. Dumb questions get dumb answers.
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
Yeah, I'm just a little sensitive, need to work on that myself. But this site isn't for talking about that. haha.
Related
My phone - I have ICS - S-OFF Amaze with Energy ROM and I had tried to apply blas0id tweaks.
The problem - In certain areas I don't have phone signal for a few minutes, then suddenly it will show 4 bars for a few minutes. In general the signal seems fickle.
Before ICS upgrade, when I had GB, I always had 4 bars in the same places. I *think* I had good signal with ICS before I did blat0id tweaks, but I am not certain of that. (ICS and the tweaks were within a few days)
My wife's Iphone still has excellent signal in those places. Tmobile Mytouch also has excellent signal in the same places. So something has changed on my amaze and not the cell towers.
What I have done so far -
1. went back to stock ICS by flashing the img file. That did not improve the signal. So then got back to energy
2. Tried another ROM - speedrom. No improvement in signal
3. Tried few apps like fresh network. They did not help
Please help me
What can/should I do? I love my amaze, but if I dont get consistent signal, I will have to replace it
Are there any tweaks that I can try?
How about the custom kernels that have been made for ICS recently, would those help?
Is there a way to increase the power to look for and catch on better signal? I can trade battery life for better signal
Thanks
I have same issue but with WiFi only. I never had GB I hope there is a work around
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Found a workaround
This was dumb luck, but when I was trying to play around the app opensignal, it wanted me to set 2G for some of its functionality, since that functionality does not work over 3g. So I went to setup and set Network mode to "GSM Only" from "GSM/WCDMA Auto"
And walla! right after that my signal jumped from 1 bar to 4 bars and has stayed there. I went back to WCDMA and signal dropped, so now I change the network mode only when I need 4G. Its a pain, but at least, the signal is good when I need it.
So with that information, can someone help how I can tweak something to get my 4G and also good signal?
Thanks
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I would like to kno also but let kno what radio u flash from the ruu
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I checked the version of my software and I think I already have R2
Build number
2.14.531.3_R2 CL373265 release-keys
So not sure if that would change anything
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
Krazex2005 said:
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Krazex .. did you try to set your network mode and see if that helps your signal stick around longer and get better signal? That is working well for me.
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
yup, that's what this setting is supposed to do, but it increased the quality of my phone signal, that is what I am trying to make better/consistent. Because even after all the bells and whistles, calling someone/receiving the calls is the primary purpose of the phone for me and if that doesn't work, the phone doesn't work for me
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
RZJZA80 said:
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Guys, OP here. This question/workaround is not about getting 4G. I am getting 4G just fine. Its about the phone signal (the bars). My amaze does not get good phone signal in some areas and when I set the network mode to GSM only (2G), phone signal strength and stability increases. and now I want to figure out how I can keep the setting to 4G and get a good phone signal
Silentbtdeadly said:
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
Click to expand...
Click to collapse
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help. The sim card was new when I got my amaze .. but no harm in trying. So I will ask for a new sim card too.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
tnkrer said:
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
Click to expand...
Click to collapse
Yea, it should be lines that have ro.ril that youd eant to change.. and fortunately one of those that you can add(it isn't included by default) will do exactly what you need, default to 2g signal when 4g is too weak. I actually need the same thing, in Jacksonville we have great signal.. except in this new place I moved into. It drains my battery by trying to stay with 4g.. but I don't have time before work to find it.
Look for a tthread by "master&slave" titled something like "super build.prop tweaks" in the vibrant forums, I THINK they had that line.. otherwise google around for something like "build.prop signal tweak" as if it isisn't in that thread, there's a really good one on some other forum.
Also, I remember there being some app that requires root that allows you to toggle between GSM preferred and 2g only.. it changes it at system level, and I don't think it was on the play store, I think it was on Xda.
But yea, I understand your dilemma, and until we get an alternative radio to flash(which I don't forsee), that is the kind of workarounds you need. If you find a reasonable solution make sure to post as it will help me too!
Sent from my nook color until my broke college students azz can afford the new nexus 7 tablet.. if my post from my nook color helped you, you COULD consider a donation..
Found that thread
http://forum.xda-developers.com/showthread.php?t=1151608
and a few others
http://forum.xda-developers.com/showthread.php?t=1227269
http://androinica.com/2009/12/hack-for-rooted-phones-promises-faster-2g3g-speeds/
http://forum.cyanogenmod.com/topic/9781-buildprop-roril-meanings/
I will try to figure out what these different ril properties control and which one to modify .. will report after my experimentation. I haven't found a good comprehensive explanation of all those properties yet.
Glad I'm not the only one...
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
I have had this problem ever since I got my phone in October (right after launch). Updating to ICS didn't help. i've been planning to root and try another ROM, but so far have been skittish as this is my only phone. hasoon, you say it's the SIM card? I am trying the switch to GSM only to see if it makes a difference. My problem is at home - I have terrible service and I live on a mountain with cell phone towers everywhere. My daughter's AT&T and my old AT&T Nokia E71x had excellent service there. I'll let you know if this helps. Maybe a trip to my local t-Mobile store is in order.
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
We know. If you wanna help read my post number 16 or try some of the links he posted in 17.. we just need a decent workaround.
So my HTC EVO 4G LTE has been treating me very nicely.. great battery life and CM10 is smooth as ever.. the kernel I have is great and I get a 2.0 GHz overclock without problems. The weirdest issue has been haunting me lately. On CyanogenMod 10, I am unable to use the 4G LTE service that is located on a tower about 150 feet away from me at this moment. The issue is that while the phone connects to the service and I can call and text, for some reason data never works. I get 4 bars that I could only get from this tower, and looking in the phone information section of *#*#4636#*#*, I see that the tower shows up as LTE. Now it used to be that on Sense, I could turn on airplane mode, wait about a minute, and then connect to 4G LTE.. but now not even airplane mode can get me connected to it. There should be no reason that the phone can't connect to the tower because the signal, when connected, is very very strong. Does anyone know of any potential fixes for this issue? It's been haunting me that I'm located here in Dallas with a 4G LTE phone on Sprint next to a known working 4G LTE tower and people around me with Samsung Galaxy S3s and other 4G LTE phones are connected but I can't. Thanks for your help in advance.
By the way, I did search the forums and surprisingly no one has an issue similar to this in any of the topics that I checked.
Bump.
Bump.
Did you post the issue in decks thread? That's where I would post, if that's the ROM you're on.
from my flying AOKP'd Evo LTE and xda premium
Have you updated your radio's? Are you s- on? What hboot if so?
The newest OTA was supposed to help with lte. It had new radios for it.
Sent from my Nexus S 4G using xda app-developers app
NaterTots said:
Have you updated your radio's? Are you s- on? What hboot if so?
The newest OTA was supposed to help with lte. It had new radios for it.
Sent from my Nexus S 4G using xda app-developers app
Click to expand...
Click to collapse
I installed the new radio from the OTA onto my phone and I thought it'd fix the problems but the problem was only temporarily fixed when I reflashed CM10. 4G LTE worked for a few hours.. but then after I went into a building, the signal dropped to 1 bar, turned on 3g, and call quality became utter crap.
I would post in deck's thread but I'm not sure the issue is specific to CM10.. I used a sense rom and for the first few hours of use it worked great and I would get strong LTE signal.. but after that I seemed to again be able to connect to the tower that's transmitting 4G LTE and in the network settings it would show up as LTE, but no data connection could be established.
grizzlywan said:
I installed the new radio from the OTA onto my phone and I thought it'd fix the problems but the problem was only temporarily fixed when I reflashed CM10. 4G LTE worked for a few hours.. but then after I went into a building, the signal dropped to 1 bar, turned on 3g, and call quality became utter crap.
I would post in deck's thread but I'm not sure the issue is specific to CM10.. I used a sense rom and for the first few hours of use it worked great and I would get strong LTE signal.. but after that I seemed to again be able to connect to the tower that's transmitting 4G LTE and in the network settings it would show up as LTE, but no data connection could be established.
Click to expand...
Click to collapse
May sound simple, but did u do a full wipe between roms? Factory reset? I know after going s-off I had to call sprint so they could send me an update to fix data and calls.
Anthonicia said:
May sound simple, but did u do a full wipe between roms? Factory reset? I know after going s-off I had to call sprint so they could send me an update to fix data and calls.
Click to expand...
Click to collapse
Yes, I did full wipes between roms including factory reset and system wipes. Only my SD cards are left unwiped.
I called sprint support today inquiring about that but the guy just had me go into ##72786# and reset my network connection settings.. didn't help the problem.. Any name to that update that I can ask them for that'll help me get it?
grizzlywan said:
Yes, I did full wipes between roms including factory reset and system wipes. Only my SD cards are left unwiped.
I called sprint support today inquiring about that but the guy just had me go into ##72786# and reset my network connection settings.. didn't help the problem.. Any name to that update that I can ask them for that'll help me get it?
Click to expand...
Click to collapse
They should have recognized it if it was an error. So calling sprint won't do much. There's an app called network in google play store. Has the option to switch to different bands, or a lot more than any stock program will let u switch to.
Try switching from CDMA auto to Evdo/LTE or the other LTE options and roaming bands they have on there and see if it helps. Hopefully someone with a fix will see this thread soon enough. Only other thing I can think of is the ##4636# (digits may be wrong)and switch some settings in there.
Anthonicia said:
They should have recognized it if it was an error. So calling sprint won't do much. There's an app called network in google play store. Has the option to switch to different bands, or a lot more than any stock program will let u switch to.
Try switching from CDMA auto to Evdo/LTE or the other LTE options and roaming bands they have on there and see if it helps. Hopefully someone with a fix will see this thread soon enough. Only other thing I can think of is the ##4636# (digits may be wrong)and switch some settings in there.
Click to expand...
Click to collapse
Nothing of the sort fixes the issue.. I'm gonna try reflashing radios.
I'm on 1.15, S-On, HTCDev unlocked, CM10.I have the same issues.
When i reflash the kernel, LTE will work for several hours, and then I get the gray bars of doom. Oddly, I still get a data connection with some apps (Reddit Is Fun, etc.), even though the phone shows no data. It's been so frustrating that I've considered going back to sense...
muffinhunter said:
I'm on 1.15, S-On, HTCDev unlocked, CM10.I have the same issues.
When i reflash the kernel, LTE will work for several hours, and then I get the gray bars of doom. Oddly, I still get a data connection with some apps (Reddit Is Fun, etc.), even though the phone shows no data. It's been so frustrating that I've considered going back to sense...
Click to expand...
Click to collapse
Yeah that's exactly what happens to me.. and no matter my attempts to airplane mode the phone refuses to connect to 4G LTE data after a few days of reflashing.. So odd.
Just clean flashed deck's most recent build from IRC (9/19?) and I'm having the same problem as before. This time it didn't even make it an hour before LTE went away.
And after searching around, apparently we're the only people in the entire world experiencing this issue.
I wouldn't say entire world because there's isn't a worldwide supply of evos lol
om4 said:
I wouldn't say entire world because there's isn't a worldwide supply of evos lol
Click to expand...
Click to collapse
I.E. His statement still stands because we would still be the only people in the world having this problem..
I am honestly stumped as to how to fix this.. Sprint support can't help and I sat in the irc and people would tell me to force lte mode in network settings.. Doesn't work.. Because even though I get data connection.. I then lose the ability to call and text.
I tried paranoid, cm10, and aokp. I couldn't get lte on any of them. And phone calls were at max volume, distorting the speaker even, no matter where the actual volume indicator is.
Went back to a sense based rom and no problems.
1.12 panda hboot, s-off'd, with the new firmware.
regalpimpin said:
I tried paranoid, cm10, and aokp. I couldn't get lte on any of them. And phone calls were at max volume, distorting the speaker even, no matter where the actual volume indicator is.
Went back to a sense based rom and no problems.
1.12 panda hboot, s-off'd, with the new firmware.
Click to expand...
Click to collapse
I'm too hooked to cm10 to switch back now lol. This is unfortunate..
I'm having the same Issue. Seems to have started with a Rev of CM10 around the beginning of September. I have been running a Sense ROM for the past few weeks, but I check in every so often to see if deck's made an update. Nothing has worked so far. Anyone have an update or solution to this problem?
muffinhunter said:
Just clean flashed deck's most recent build from IRC (9/19?) and I'm having the same problem as before. This time it didn't even make it an hour before LTE went away.
And after searching around, apparently we're the only people in the entire world experiencing this issue.
Click to expand...
Click to collapse
I am having the exact same issue as you with the "Greg bars of death". I had good consistent 4g at one point in early September (possible unofficial 9/6 build based on saved speed tests) but not since then. I have also found that having LTE off gives me more reliable 3G data.
Sent from my Nexus 7 using xda app-developers app
Join the club... it's the typical LTE connection issue with the EVO LTE. Its not your phone or updates. Even a 100% stock EVO LTE with all the updates has this issue.
I really like this phone but want to make sure that the LTE connection issues are able to be fixed with a software update. I hope Sprint isn't BS'ing on this. I have a couple of days to return the phone and want to make sure this is fixable before deciding to keep it.
Anyone know if the Sprint rep who said it's a software issue is telling the truth or BS?
At heart it is a good radio. No reason it shouldn't work as it's supposed to. So, the majority of the issue is software. And it is fixable. Maybe just as good as S3 and iPhone 5 LTE reception?
The big question here is if Sprint will actually fix it this time. Know that there were fixes for LTE in 2 previous ota's. To what extent they worked on it before, idk. Thinking that this time is make or break it.
So, the answer is wait and see. U can get out of contract if LTE doesn't work for u though. It's apart of your service plan. Gonna require persistence on your part to get out after the 14 days is up, but u can do it.
If I were u and needed a good LTE capable phone, I'd go with the S3. Because at this point, it is up in the air if it will receive LTE like it should in the near future.
Correction first update was wifi, second was lte lol
Hope so. Has to be software related since both this and the s3 have the same radio. And, since the airplane mode on/off trick gets it working, I'm lead to believe its software.
Sent from my EVO
celticking said:
Hope so. Has to be software related since both this and the s3 have the same radio. And, since the airplane mode on/off trick gets it working, I'm lead to believe its software.
Sent from my EVO
Click to expand...
Click to collapse
Airplane mode trick???
I really hope they can fix this. I decided to keep the phone after looking at the S3 screen and build quality I just couldn't switch. I really love the screen on this!! It is just as good as my wife's iPhone 5 in color reproduction. The S3 is nice but don't like PenTile as I can notice it and I don't like it when whites have a blue color to it.
The Evo LTE has the same SoC as the S3. If the Evo was having hardware problems with LTE so would the S3, but that is not the case (according to what I have been able to look up). Therefore it can be concluded that the LTE issues are software and not hardware.
docmalc said:
Airplane mode trick???
Click to expand...
Click to collapse
AKA Airplane Mode Dance
If you are in an LTE area and your phone is stuck on 3G, or if your phone is on LTE and it drops back down to 3G, then toggling Airplane Mode ON and back OFF will make the radio scan and re-latch to LTE.
That's the problem with our EVOs, it's an LTE threshold and handoff problem.
I live right on the edge of LTE coverage, so my phone will handoff to 3G because it decides the LTE signal is too weak. The problem is, in my area a "weak" LTE signal is MUCH faster than a strong 3G signal. If I go into my radio options and choose "LTE only" it will hold LTE signal all day long. So the signal is there, albeit weak.
What we need is a software fix that will change our radio's signal threshold so that it will prioritize a weaker LTE signal over 3G.
I'm tired of doing the airplane mode dance. If LTE is available, I want my EVO to latch on and stay on it even if it's weak.
Sent from my EVO
I use to get spotty LTE here in san Antonio so I thought it was the radio. But now I've been getting it pretty consistantly everywhere. So now I'm starting to think its there towers or something
Sent from my EVO using xda premium
mexlos said:
If I go into my radio options and choose "LTE only" it will hold LTE signal all day long.
Sent from my EVO
Click to expand...
Click to collapse
Any way to do this on sense? I've only got lte/cdma and cdma only options
banccalif said:
Any way to do this on sense? I've only got lte/cdma and cdma only options
Click to expand...
Click to collapse
Using a Sense ROM, open your phone dialer and type *#*#4636#*#*
Select "Phone Information" then scroll down to "Preferred Network Type" and that should give you the option you're looking for
Sent from my EVO
Or download the app "network" from playstore. Let's u do the same thing while less obtrusive and gives u more options.
Anthonicia said:
Or download the app "network" from playstore. Let's u do the same thing while less obtrusive and gives u more options.
Click to expand...
Click to collapse
Can you link it? I'm finding various apps named "network" something or another but none with just that solely as the title
The icon changed so I had a bit of trouble finding it but here you go Network app
mexlos said:
Using a Sense ROM, open your phone dialer and type *#*#4636#*#*
Select "Phone Information" then scroll down to "Preferred Network Type" and that should give you the option you're looking for
Sent from my EVO
Click to expand...
Click to collapse
Anthonicia said:
Or download the app "network" from playstore. Let's u do the same thing while less obtrusive and gives u more options.
Click to expand...
Click to collapse
om4 said:
The icon changed so I had a bit of trouble finding it but here you go Network app
Click to expand...
Click to collapse
Thanks guys! Installing app now and have the data code saved for a rainy day as well
Edit : after switching to lte only, I get no data (voice or sms) but im able to run a speed test using 4g. I live in L.A. but I connect to an Albuquerque, New Mexico server I'm not sure what else I'm to do to enable lte only and keep data
It's NOT true for me that switching it to LTE only will keep it connected. I still only keep the connection for about 10 seconds and then it goes back to 3G. My understanding is that option in both *#*#4634#*#* and ##DATA# is "preferred mode." It will drop back to 3G.
And I know for sure that Sprint and HTC have an open ticket on this issue of aquiring and keeping an LTE signal. They will eventually get a fix out for it.
I used the network tool post earlier and set mine to cdma/lte... So I get 4g and voice/text.. no evdo. Which is fine by me because evdo sucks anyway lol.
Works great I now can keep 4g in my house like my gfs gs3 and not switch back to crap-do
Sent from my EVO using xda premium
Someone try the 10/21 build of cm10 from deck.
I'm holding lte and seeing it places I couldn't get it before even when set to lte only.
This has completely corrected the issue for me.
Sent from my EVO using XDA Premium HD app
Hi all. I'm on a Rom that doesn't have 4G LTE icons. Can I add some? How do I add them?
I too would like this. I was on the collective rom and signal icons were there and working. Anyway to get that on other rooms?
Sent from my SAMSUNG-SGH-I717 using xda premium
Um, why? 4g is lte on asop.
khaytsus said:
Um, why? 4g is lte on asop.
Click to expand...
Click to collapse
I'm on a stock rom by hotwire and it doesn't gave the LtE icons. I want the LTE icons that come with the stock at&T rom
Wrong place bud. This belongs in Q&A.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I would like a bacon icon to show when I am on an LTE network. If not, my whole phone experience is ruined.
rangercaptain said:
I would like a bacon icon to show when I am on an LTE network. If not, my whole phone experience is ruined.
Click to expand...
Click to collapse
Thanks for the help my man. Being that T-Mobile is just now rolling out LTE in my area, I'd kinda sorta like to know what areas in Houston I go to that have LTE. The only way I can actually tell is when I use a different rom that gives me slower speeds, but does have LTE icons. I'd like to stay with the rom I have and add LTE icons to it. Didn't think it would be this much trouble. Troll on.
Polynesianroots88 said:
Wrong place bud. This belongs in Q&A.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Thanks! I added it to the Q&A section. I don't know how to close this thread though.
Christogq said:
Thanks for the help my man. Being that T-Mobile is just now rolling out LTE in my area, I'd kinda sorta like to know what areas in Houston I go to that have LTE. The only way I can actually tell is when I use a different rom that gives me slower speeds, but does have LTE icons. I'd like to stay with the rom I have and add LTE icons to it.
Click to expand...
Click to collapse
Sorry buddy, but the rom doesn't have anything to do with your speed. That is determined by traffic at the tower (number of users connected to it), the modem you have (the baseband), APN settings, and the weather. ROM has nothing to do with it and icons have nothing to do with it.
You get the best speed your modem can give you under the conditions I named, whether the corresponding icon is in the phone framework or not. Sorry you didn't like my answer. Go have some bacon -- it won't change anything, but it is delicious.
rangercaptain said:
Sorry buddy, but the rom doesn't have anything to do with your speed. That is determined by traffic at the tower (number of users connected to it), the modem you have (the baseband), APN settings, and the weather. ROM has nothing to do with it and icons have nothing to do with it.
You get the best speed your modem can give you under the conditions I named, whether the corresponding icon is in the phone framework or not. Sorry you didn't like my answer. Go have some bacon -- it won't change anything, but it is delicious.
Click to expand...
Click to collapse
I have two different Roms. Flashed them both and did speed test on both. About a good 10 times each. Standing in the same spot. The Rom I'm on right now consistently gave me higher DL & UL speeds. I didn't change anything. No APN's and modems. I wouldn't think it would make a difference, but I really really really would like the Icons to show when I'm picking up the LTE signal. I just feel better knowing what I'm getting and where i'm getting it. It's cause it's still new here in Houston. While bacon is delicious and there's never really a bad time for it, it won't help me with my current question. Though it will supply me with the necessary energy to keep pushing on in my quest to add 4G LTE Icons to the rom I'm using.
Well my bacon loving friend, many ROMs we have are ported from phones without LTE modems so they don't have the icon and probably can't be added. The only place I know you can check to know for sure is the settings>about phone>status>network type. Maybe in the market there is a signal strength app. I will look and see.
https://play.google.com/store/apps/details?id=de.android.telnet
OBTW H+ is LTE for the BS Rom.
rangercaptain said:
https://play.google.com/store/apps/details?id=de.android.telnet
OBTW H+ is LTE for the BS Rom.
Click to expand...
Click to collapse
Ahhh ok. That answers it then. I'm on IMM76D.DXLJ2-h0tw1r3 and I've seen H+ before. when i was doing the speed tests, the icon was just 4G. I only knew it was LTE because the speed test said so. I can't look down and see if I'm on regular 4G or LTE though.
The ROM base is from Singapore for their version of the note, the N7005. They don't have LTE yet so there is no LTE icon. But they do have t-mobile there and they use H+ icon for their high speed data network type.
Anyone else notice the signal on the one seems a bit weak? Coming from my note 2 is a bar or two less. I assume this may be becuase of radios.
I did as well, some guy on here pointed out to me that it's kinda not accurate.
hit up your dialer and punch in *#*#4636#*#* and go to phone information. post signal strength numbers.
you can also get to this info through the settings menu in >about>network
fix-this! said:
Anyone else notice the signal on the one seems a bit weak? Coming from my note 2 is a bar or two less. I assume this may be becuase of radios.
Click to expand...
Click to collapse
I actually noticed quite the opposite... However it's only been a little over a day of owning this device. I'm also coming from a note 2.
Yup i mostly get 1-3 bars no higher than tha on LTE. on H i get 5.
This is my first phone on the At&t network and my bars are between 1&2 sometimes 3. I figured this was just normal since I have no other phone compared with. But regardless of what my signal says, I have no problems with dropped calls and my data is the fastest I've ever seen on any network so I'm not complaining.
Sent from my HTC One using xda premium
I compared it with an iPhone 4 and a Blackberry Bold, and the One is about 10-15 less dBm side-by-side. I wonder what the problem is.
I get full bars of 4g in my area.
Sent from my HTC One using xda app-developers app
spitfire2425 said:
I get full bars of 4g in my area.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
any comparison with something else in numbers
I got nothing for that, sorry.
Sent from my HTC One using xda app-developers app
I tried switching to GSM (EDGE) only, the signal is better. HSPA (UMTS?) and LTE seems to give weaker signal. However, even in GSM mode, it's still weaker than the other devices.
BB88 said:
I tried switching to GSM (EDGE) only, the signal is better. HSPA (UMTS?) and LTE seems to give weaker signal. However, even in GSM mode, it's still weaker than the other devices.
Click to expand...
Click to collapse
I am curious as to how you switched from one to the other. I am still used to the HTC One X and being able to do that manually. With this new phone I can't find the right spot to do the switching. Where I live I get very poor signal on even the 4G network and would like to improve performance since there is no radios yet to flash like the HTC One X
Go to Settings/About/Network
the RSRP(dBm); is your signal strength ..the bars really are just guessing and change from rom to rom/kernel
leesumm said:
I am curious as to how you switched from one to the other. I am still used to the HTC One X and being able to do that manually. With this new phone I can't find the right spot to do the switching. Where I live I get very poor signal on even the 4G network and would like to improve performance since there is no radios yet to flash like the HTC One X
Click to expand...
Click to collapse
In settings -> mobile data, you can change the Network mode.
clsA said:
Go to Settings/About/Network
the RSRP(dBm); is your signal strength ..the bars really are just guessing and change from rom to rom/kernel
Click to expand...
Click to collapse
This is how I get the numbers when comparing to other devices. You can do similar numbers in iPhone and Blackberry too.
BB88 said:
In settings -> mobile data, you can change the Network mode.
This is how I get the numbers when comparing to other devices. You can do similar numbers in iPhone and Blackberry too.
Click to expand...
Click to collapse
Yes I know about reading the numbers and mostly of what they mean.
But this
BB88 said:
In settings -> mobile data, you can change the Network mode. I can't do, anything that is there is greyed out and I can't change what type of network I am on. The HTC One X I was able to , this one , no.
Click to expand...
Click to collapse
leesumm said:
In settings -> mobile data, you can change the Network mode. I can't do, anything that is there is greyed out and I can't change what type of network I am on. The HTC One X I was able to , this one , no.
Click to expand...
Click to collapse
Mine is a Rogers one, not an AT&T one, probably that's why.